Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

This Pre-Solicitation opportunity from Department Of Defense was posted on August 17, 2022. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

ENVIRONMENTAL GROUNDWATER SAMPLING/INVESTIGATION

Closed
W911KF22Q0035Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 562910
New
Theatre Mold Remediation Scope of Work
Solicitation # AT25-0006
Solicitation AT25-0006 is a subcontracting opportunity with Adams and Associates, Inc. for comprehensive mold remediation at Theatre Building 1086 of the Atterbury Job Corps Center in Edinburgh, Indiana. The project was initiated following a sprinkler system failure that caused significant water damage. The scope of work requires the remediation of the entire building, including cleaning visible mold from CMU walls, concrete floors, and vinyl tiles, as well as the removal and replacement of affected drywall, gypsum wallboard, and acoustical tile ceiling finishes. Additionally, the contractor must clean or replace damaged theater seating cushions and perform dehumidification to maintain humidity levels at or below 50 percent. All work must adhere to ANSI/IICRC S520 standards, EPA guidelines, OSHA regulations, and the findings of the Micro Air Inc. Mold Testing report dated April 11, 2024. The contract is a single lump sum award based on best value, with evaluation weights distributed across price (60 points), quality (20 points), past performance (10 points), and schedule (10 points). Key requirements include the provision of a Certified Industrial Hygienist for verification and final clearance, a detailed remediation plan featuring HEPA filtration and negative air pressure, and compliance with Davis-Bacon Act wage determinations. Bidders must hold a valid Indiana Contractor's License and provide proof of automobile and workers compensation insurance, naming Adams and Associates, Inc. as an additional insured. Proposals must be submitted on company letterhead and include a detailed cost breakdown, a timeline for substantial completion, and a 90-day bid guarantee. Work must commence within 14 days of the Notice to Proceed, and payment is issued on Net 30 terms.
Atterbury Job Corps Center

POSTED

about 1 hour ago

DEADLINE

in 10 days

General Info

NAICS

562910 - Remediation Services

Place of Performance

Anniston, AL, 36201-4199, UMI

Set-Aside

SBA

Documents

13

DD1664 OB/OD Statistical Analysis Report

PDF, High priority: read this firstsow
High

FY22 Environmental Sampling - Landfill Monitoring Well Data

PDF, High priority: read this first1 page · specifications
High

FY23 Environmental Sampling / Investigations SOW

PDF, High priority: read this first8 pages · sow
High

Table 2 ANAD Landfill Monitoring Well Data

PDF, High priority: read this first1 page · specifications
High

W911KF22Q0035 - Solicitation for Commercial Items

PDF, High priority: read this first76 pages · rfq
High

Evidence of Authority to Sign Offers

PDF, Low priority1 page · other
Low

Past Performance Evaluation Matrix

PDF, Low priority1 page · past-performance
Low

Past Performance Questionnaire

DOC, Low priority2 pages · past-performance
Low

10.+DD1664+%E2%80%93+CDRL+Environmental+Sampling+%26+Analysis+Plan.pdf

PDF

11.+DD1664+%E2%80%93+CDRL+Environmental+Sampling+Annual+Groundwater+Report.pdf

PDF

7.+DD1423+%E2%80%93+CDRL+Environmental+Sampling+%26+Annual+Plan.pdf

PDF

8.+DD1423+-+CDRL+Environmental+Sampling+45+day+Statical+Analysis+Report.pdf

PDF

9.+DD1423+%E2%80%93+CDRL+Environmental+Sampling+Annual+Ground+Water+Report.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

4 updates
PhaseClosed
Posted

Presolicitation

Notice updated

Response deadline changed from Aug 12, 2022 to Jul 28, 2022. The notice description changed.

Notice updated

Notice details unchanged. Attachments may have changed.

Response Deadline

Deadline has passed

Notice updated

Notice details unchanged. Attachments may have changed.

Notice updated

Notice details unchanged. Attachments may have changed.

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → W6QK Acc Anad
Contacts1 person available
OfficeANNISTON, AL, 36201-4199, USA
Office AddressANNISTON, AL, 36201-4199, USA

Full Description

Show more
The Contractor shall conduct semiannual sampling and monitoring at the ANAD groundwater wells in accordance with (IAW) the applicable ANAD Hazardous Waste permit provisions and IAW the methodology specified in the permit or the applicable EPA-approved method. Samples shall be sent to an EPA certified lab. All Quality Assurance/Quality Control (QA/QC) requirements shall be met. Analytical data packages shall be at a minimum UDS Level 2 format. The contractor shall provide technical assistance and support to ANAD and respond to comments and correspondence from State and Federal regulators (pertaining to submittals to ADEM). The contractor shall prepare an ANAD specific Sampling and Analysis plan to have onsite when performing sampling activities. The contractor shall complete two (2) semi-annual groundwater sampling events at the OB/OD unit and the solid waste landfill and shall complete a statistical report documenting semi-annual sampling events at the OB/OD site, including date, method, constituents of concern (COCs), etc. The contractor shall complete an annual report according to the ANAD Resource Conservation and Recovery (RCRA) permit documenting the groundwater sampling and analysis for the OB/OD unit. Optional tasks may include, site investigation(s), as needed after a spill or newly discovered Solid Waste Management Unit (SWMU) to obtain information to describe the nature and extent of contamination, potential threat to human health and/or the environment, and to support a Corrective Measures Study or a finding of no further action required. This is a 100% Small Business Set Aside procurement. North American Industry Classification System Code is 562910. POINT OF CONTACT: Contract Specialist, Sara B. Young, contact@example.gov

More opportunities from Department Of Defense → W6QK Acc Anad

Same awarding agency

NAICS: 333248
New
Federal
Radia Paint Shakers
Solicitation # W911KF27QA007
Solicitation W911KF27QA007 is a firm fixed price procurement for the delivery of brand-name Radia paint shakers to the Anniston Army Depot in Alabama. The requirement includes one explosion-proof five-gallon gyroscopic mixer, two multi-size mixers for containers ranging from one quart to five gallons, and four one-gallon vortex mixers. All equipment must meet 110V, 60 Hz power requirements, include operator manuals, and come with a one-year warranty. The Radia 5025 model specifically requires Class I, Division 1, Groups C and D explosion-proof certification. Delivery is required by December 30, 2026, to buildings 143, 409, and 433, with the contractor responsible for all transportation costs and the coordination of delivery appointments. The government will utilize a Lowest Price Technically Acceptable source selection process, evaluating offers based on price and a met/not met technical factor. A ten percent price evaluation preference is available for HUBZone small business concerns. Invoicing and receiving reports must be processed electronically through the Wide Area WorkFlow system. The contract includes stringent marking and labeling standards in accordance with MIL-STD-129 and MIL-STD-130, requiring unique item identifiers for high-value items and specific components. All proposals must be submitted electronically via the Procurement Integrated Enterprise Environment Solicitation Module by the specified deadline.
All Other Industrial Machinery Manufacturing

POSTED

1 day ago

DEADLINE

in 11 days
View Details
NAICS: 811310
New
Federal
Preventative Maintenance and Repairs
Solicitation # W911KF27QA006
Solicitation W911KF27QA006 is a firm fixed price procurement for the preventative maintenance and emergency repair of Haas Computer Numerical Controlled CNC machines at the Anniston Army Depot in Alabama. The scope of work requires a certified technician to perform annual maintenance checks as recommended by Haas Automation, Inc., including backing up machine parameters and applying software updates. This sole-sourced procurement is directed to Phillips Corporation, though other organizations with similar capabilities may provide evidence to the contracting officer for future consideration. The contract structure consists of a base period from January 1, 2027, to December 31, 2027, with four subsequent one-year option periods extending through December 31, 2031. Performance is monitored by Anniston Army Depot personnel through physical inspections and document reviews. Payment is processed electronically via the Wide Area WorkFlow system, with contractors choosing between Government Smart Pay Credit Card or DFAS. The solicitation incorporates various FAR and DFARS clauses, including strict requirements for cybersecurity, the prohibition of covered defense telecommunications equipment, and adherence to service contract labor standards. All responses must be submitted electronically through the PIEE Solicitation Module.
Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

2 days ago

DEADLINE

in about 1 month
View Details
NAICS: 811310
New
Federal
Metal Forming Press Preventative Maintenance, Emergency Repairs and Parts
Solicitation # W911KF27QA003
Solicitation W911KF27QA003 is a sole sourced procurement for NIDEC Minster Corporation to provide on-site preventive maintenance, unlimited emergency repair, and replacement parts for metal forming hydraulic press machines at the Anniston Army Depot in Alabama. The scope of work covers specific equipment, including a 1,500 Ton Macrodyne Metal forming Press, multiple Minster Metal forming Presses, and a Perfecto RD-84126 Feeder Coil. All services must be performed according to original equipment manufacturer procedures and guidelines. The contract structure consists of a one-year base period starting at award, with four subsequent one-year options, extending the potential period of performance through November 2031. The contractor is required to maintain significant insurance coverages, including 500,000 dollars for general and property damage liability and 100,000 dollars for workers compensation. Administrative requirements include electronic invoicing via Wide Area Workflow and strict adherence to installation security and safety protocols at the Anniston Army Depot. Evaluation for the award is based on a performance risk assessment of relevant past performance. The solicitation is unrestricted under NAICS code 811310, and responses must be submitted through the PIEE Solicitation Module by November 23, 2026.
Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

3 days ago

DEADLINE

in 25 days
View Details
NAICS: 532490
Federal
Aera of Interest (AoI) Equipment rental and Facility Support (CSO-W911KF25SC002)
Solicitation # W911KF-25-S-C002-AoI014
The Army Contracting Command-Anniston Army Depot is seeking innovative commercial equipment rental and facility support solutions under Area of Interest AoI 014, part of the broader Commercial Solutions Opening solicitation W911KF-25-S-C002. The primary objective is to establish flexible and rapid access to operational, construction, industrial, and heavy equipment, including material handling, power generation, earthmoving, and climate control tools such as high-capacity dredge and trash pumps. These capabilities are essential to preventing depot bottlenecks, mitigating facility disruptions, and ensuring continuous production readiness at the Anniston Army Depot in Alabama. Authorized under 10 USC 3458 and DFARS Subpart 212.70, the procurement utilizes a multi-phased evaluation process consisting of a Solution Brief, a Presentation or Pitch, and a Commercial Solution Proposal. Awards will be based on Best Value, considering cost, quality, technical capability, and delivery schedule, and must be structured as fixed-price or fixed-price incentive contracts. Eligible respondents must possess a Unique Entity ID, maintain active registration in the System for Award Management and the PIEE invoicing system, and comply with the Buy American Act. Written solutions must be submitted via email by November 19, 2026, and should include a technical concept and a Rough Order of Magnitude price.
Other Commercial and Industrial Machinery and Equipment Rental and Leasing

POSTED

8 days ago

DEADLINE

in 21 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS