EPOXY COATING KIT

EPOXY COATING KIT
EPOXY COATING KIT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD002, COVERED DEFENSE INFORMATION APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment COMPONENTS OF A KIT, AS IDENTIFIED BY A SINGLE NSN, SHALL BE PACKAGED IN ACCORDANCE WITH NSN PACKAGING REQUIREMENTS, AND THEN MARKED I/A/W MIL-STD-129.
PLACE CONTENTS OF THE KIT IN ONE (1) BOX, ENSURING THE BOX IS SUFFICIENT TO PREVENT DAMAGE TO CONTENTS OF KIT. IF ONE BOX IS INSUFFICENT, ENSURE THAT EACH BOX IS MARKED APPROPRIATELY AS TO IDENTIFY IT AS PART OF A KIT (THAT IS, 1 OF 2, 2 OF 2, ETC.)
CONTENTS MUST BE CUSHIONED AS NECESSARY TO PREVENT MOVEMENT AND DAMAGE OF CONTENTS. EACH BOXED KIT MUST CONTAIN A LIST OF CONTENTS FOR ITEMS WITHIN THE KIT.
Hazard Communication Standard Notice:
Effective June 1, 2015, Federal Standard No. 313-E, Material Safety Data, Transportation Data and Disposal Data for Hazardous Materials Furnished to Government Activities, establishes the requirement for preparation and submission of Safety Data Sheets (SDS) in lieu of Material Safety Data Sheets (MSDS) by suppliers who provide hazardous materials to government activities.
The Occupational Safety and Health Administration (OSHA) has modified its Hazard Communication Standard (HCS) to conform to the United Nations Globally Harmonized System of Classification and Labeling of Chemicals. As a result of this change, GSA revised Federal Standard No. 313-E requiring Safety Data Sheets for classifying chemicals and communicating the applicable information on labels.
In accordance with the revised standard after June 1, 2015:
1. Suppliers will be required to submit, to the contracting officer for review and approval prior to award, safety data sheets consistent with the requirements found at 29 C.F.R. 1910.1200 for hazardous materials delivered to the Government.
SPE8ES-27-T-0026
SECTION B
2. Suppliers will also be required to submit, to the contracting officer for review and approval prior to award, Hazardous Communication Standard (HCS) labels in accordance with 29 C.F.R. 1910.1200 requirements or current Consumer Product Safety Act (CPSA), Federal Hazardous Substance Act (FHSA) labels when subject to labeling requirements under those statutes. This product labeling is required for hazardous materials delivered to the Government.
3. Finally, suppliers must train their employees on the new safety data sheets, hazardous communication labels, and requirements of 29 C.F.R. 1910.1200.
For more information on SDS, refer to OSHAs website, available at:
https://www.osha.gov/law-regs.html
For information on 29 C.F.R. 1910.1200, refer to the below link:
https://www.osha.gov/dsg/hazcom/index.html
U/I = KT
SIZE: CONSISTS OF COMPONENT A (EPOXY RESIN AND SOLVENTS) AND COMPONENT B
(POLYAMIDE AND/OR AMINE RESIN AND SOLVENTS) TO EQUAL 2 QUARTS.
IN ACCORDANCE WITH MILITARY SPECIFICATION MIL-PRF-22750
Type II Volatile organic hazardous air pollutants-free (VOHAP-free) formulation to meet maximum VOC content of 340 g/l (2.8 lbs/gal) as packaged. The type II is a direct replacement for the type I, which has been cancelled.
Class H High solids, solvent base formulation.
Grade B For the interior of tactical equipment not requiring weather resistance. (Note: Grade A For Navy and Army equipment requiring weather resistance. Grade A approved products can also be used as a grade B material.)
COLOR: FLAT, RED IN ACCORDANCE WITH THE LATEST VERSION OF FED-STD-595, COLOR NUMBER 31136.
RS055: Shelf life requirement RS001 for a TYPE 2 (CODE 4) item with a shelf life of 12 month (extendable) applies to this item.
ADDITIONAL REQUIREMENTS:,,
1. MIL-STD-129 LABEL WILL ALSO INCLUDE LOT OR BATCH NUMBER,,
2. NSN/Part Number: 8010-01-414-8426 Quantity: 2 KT Purchase Request: 7018602927QTY: 2 Delivery: 20 days ADO