EPOXY PRIMER COATING K

EPOXY PRIMER COATING KIT
EPOXY PRIMER COATING KIT
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
Hazard Communication Standard Notice:
Effective June 1, 2015, Federal Standard No. 313-E, Material Safety Data, Transportation Data and Disposal Data for Hazardous Materials Furnished to Government Activities, establishes the requirement for preparation and submission of Safety Data Sheets (SDS) in lieu of Material Safety Data Sheets (MSDS) by suppliers who provide hazardous materials to government activities.
The Occupational Safety and Health Administration (OSHA) has modified its Hazard Communication Standard (HCS) to conform to the United Nations Globally Harmonized System of Classification and Labeling of Chemicals. As a result of this change, GSA revised Federal Standard No. 313-E requiring Safety Data Sheets for classifying chemicals and communicating the applicable information on labels.
In accordance with the revised standard after June 1, 2015:
1. Suppliers will be required to submit, to the contracting officer for review and approval prior to award, safety data sheets consistent with the requirements found at 29 C.F.R. 1910.1200 for hazardous materials delivered to the Government.
2. Suppliers will also be required to submit, to the contracting officer for review and approval prior to award, Hazardous Communication Standard (HCS) labels in accordance with 29 C.F.R. 1910.1200 requirements or current Consumer Product Safety Act (CPSA), Federal Hazardous Substance Act (FHSA) labels when subject to labeling requirements under those statutes. This product labeling is required for hazardous materials delivered to the Government.
3. Finally, suppliers must train their employees on the new safety data sheets, hazardous communication labels, and requirements of 29 C.F.R. 1910.1200.
For more information on SDS, refer to OSHAs website, available at:
SPE8ES-27-T-0242
SECTION B
https://www.osha.gov/law-regs.html
For information on 29 C.F.R. 1910.1200, refer to the below link:
https://www.osha.gov/dsg/hazcom/index.html
U/I = BX
SIZE: BOX OF 12 SPRAY BOTTLES. EACH MIL-DTL-53022 PRIMER TOUCHUP KIT
CONSISTS OF 40ML OF PART A, 10ML OF CATALYST PART B, AND 10ML OF
THINNER, TOTALING 60ML.
IN ACCORDANCE WITH MILITARY SPECIFICATION MIL-DTL-53022, "PRIMER, EPOXY
COATING, CORROSION INHIBITING LEAD AND CHROMATE FREE"<(>,<)>
TYPE 2: HIGH SOLIDS, LEAD AND CHROMATE FREE FORMULATION TO MEET A
MAXIMUM VOLATILE ORGANIC COMPOUND CONTENT OF 420 G/L (3.5 LBS/GAL).
Notes: Type II and III shall only be used for missile applications: including flight vehicle, shipping container (canister) and associated ground support equipment used for launch and control of the flight vehicle. No other applications.
In addition: As of MEMORANDUM FOR: Chemical Agent Resistant Coatings (CARC) User Community dated 3April2020, "SUBJECT: Type IV is direct replacement for types II and III of MIL-DTL-53022.
ARL fully recognizes and supports the use of type IV as a direct replacement for types II and III of MIL-DTL-53022F."
RS055: Shelf life requirement RS001 for a TYPE 2 (CODE 4) item with a shelf life of 12 month (extendable) applies to this item.
MIL-STD-129 LABELS ARE REQUIRED, MIL-STD-129 LABEL WILL INCLUDE THE
ADDITION OF LOT OR BATCH NUMBER.
THIS NSN HAS QUALIFIED PRODUCTS LIST (QPL)
REQUIREMENTS.
.
THE MANUFACTURER FOR THE QPL ITEM MUST BE QPL
APPROVED AT THE TIME OF THE CONTRACT AWARD.
TDP Rev A Gen 1 IAW BASIC SPEC NR MIL-DTL-53022F(1) REVISION NR F DTD 04/15/2021 PART PIECE NUMBER: MIL-DTL-53022 TY2
TDP Rev A Gen 1 IAW REFERENCE STD NR MIL-STD-129R(3) REVISION NR R DTD 02/25/2023 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE STD NR MIL-STD-147F NOT 1 REVISION NR F DTD 09/05/2024 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE UNK FED-STD-313F REVISION NR F DTD 10/12/2018 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE UNK QPL-53022-14 NOT 1 REVISION NR 14 DTD 01/25/2008 PART PIECE NUMBER:
SPE8ES-27-T-0242
SECTION B
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7018911361 0001 BX 10.000
NSN/MATERIAL:8010015107178
DELIVERY (IN DAYS):0076
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:HM CLNG/DRY:1 PRESV MAT:ZZ
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:C
UNIT CONT:ZZ OPI:M
INTRMDTE CONT:ZZ INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:33 -33 Type II, shelf life
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
The product shall be furnished in the specified quantity in round, compound lined, double seamed end cans with pressure activated spray orifice type dispensers of the type normally used for this product, providing that there will be no interaction chemically or physically with the contents so as to damage the container or alter the strength, quality or purity of the contents. Each can shall be provided with a removable/replaceable metal or full sized, double shell, plastic cap adequate to protect the dispenser in accordance with normal commercial practice. The filled cans shall be closed in a manner that will insure that the contents will not spill or leak from the container during shipment, handling, storage and redistribution.
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
PARCEL POST ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN RD
REC WHSE 57
TRACY CA 95304-5000
US
SPE8ES-27-T-0242
SECTION B
PR: 7018911361 PRLI: 0001 CONT’D
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
25600 S CHRISMAN RD REC WHSE 57
TRACY CA 95304-5000
US
Need Ship Date:01/25/2027 Original Required Delivery Date:02/16/2027
SPE8ES-27-T-0242 NSN/Part Number: 8010-01-510-7178 Quantity: 10 BX Purchase Request: 7018911361QTY: 10 Delivery: 76 days ADO