Epoxy Repair Services

SYNOPSIS/SOLICITATION W91ZLK-22-R-0001 *Note: Updated 12/01/2021 See revisions below This combined synopsis/solicitation is for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. Incorporated provisions and clauses are those in effect through Federal Acquisition Circular (FAC) 2021-07 (11 AUG 21). The solicitation number for this request for proposal (RFP) is W91ZLK-22-R-0001. This requirement is under the associated North American Industry Classification System (NAICS) Code 238190 � Other Foundation, Structure, and Building Exterior Contractors. The Government contemplates award of a Purchase Order on a firm-fixed price (FFP) basis in accordance with FAR 13, Simplified Acquisition Procedures. The period of performance is within 3 months from the date of award for the base requirement and 12 months for the option requirements. This procurement will be evaluated as Lowest Price Technically Acceptable, for the procurement of the following services. The Repair and Recoat of Floors and Walls with Chemical Resistant Epoxy Base Requirement Tank Farm Approx. 2,000 sq. ft. Room 27 Sump Pit & Tank Approx. 400 sq. ft. Options Option 1 - Room 2 Approx. 215 sq. ft. Option 2 - Room 3 Approx. 200 sq. ft. Option 3 - Room 25 Approx. 85 sq. ft. Option 4 - Room 26 Approx. 300 sq. ft. Option 5 - Room 28 Approx. 290 sq. ft. Option 6 - Room 29 Approx. 290 sq. ft. Option 7 - Room 31 Approx. 290 sq. ft. Option 8 - Various Up to 10 isolated epoxy repair locations within the CTF, with each site being less than 4 sq. ft. Award will be made to the Offeror whose response to the Combined Synopsis/Solicitation represents the best value to the Government. Proposals will be evaluated in accordance with the Lowest Price Technically Acceptable (LPTA) Source Selection process described in FAR 15.101-2. Site Visit The Government will allow access to the Chemical Transfer Facility (CTF) sump area and secondary holding tank area on November 22, 2021 from 11:00-3:00 PM Eastern Time. The CTF is located in Building E3832 on the Edgewood Area of Aberdeen Proving Ground. Offerors will be able to measure the surface area of the floors and walls and evaluate the condition of the existing epoxy flooring. Offeror participation is limited to no more than two (2) individuals per organization. Offerors must register by e-mail to terrijuana.p.veals.civ@army.mil and shantice.m.wright.civ@army.mil by Monday, November 18, 2021 at 10:00 AM Eastern Time. Attendees should allow sufficient time to enter the installation. Visitors must enter the Hoadley Road of APG-EA, located on MD Route 24, to obtain a visitor�s pass. The following information must be provided: valid driver's license and vehicle registration. Visitor Center information is available at www.home.army.mil/apg/index.php/about/visitor-information. Name of person to be visited will be Brandon Bruey. Parking will be provided in front of Building E3832. All questions must be submitted via email to terrijuana.p.veals.civ@army.mil by November 29, 2021 at 10:00 AM Eastern Time. SUBJECT LINE: W91ZLK-22-R-0001 PROPOSAL FROM (INSERT COMPANY NAME). All questions will be answered via an amendment to the solicitation on beta.SAM.gov. Firm Fixed Price (FFP) proposals must be signed, dated, and received by Wednesday, December 8, 2021 at 10:00 AM Eastern Time. The contractor, as an independent party and not an agent of the government, shall provide The Repair and Recoat of Floors and Walls with Chemical Resistant Epoxy of the Chemical Transfer Facility (CTF) sump area, secondary holding tank area, and select laboratories and storage rooms to ensure containment of any hazardous or aggressive chemicals, should there ever be a leak in the system. Business hours at CBARR are 7:00AM � 5:00PM Eastern Standard Time, Monday through Friday, excluding federal holidays. All work to be performed will be inspected for compliance with performance requirements by the Contracting Officer�s Representative (COR). SUBMISSION PROCEDURES: 52.212-1 Instruction to Offerors Commercial Items This clause applies in its entirety and there are currently no addenda to the provision. NO PHONE CALLS WILL BE ACCEPTED. All proposals from responsible sources will be considered. Offerors who are not registered in the System for Award Management (SAM) database prior to award will not be considered. Offerors may register with SAM by calling 1-866-606-8220 or online at www.beta.sam.gov. Offerors are cautioned to ensure that their proposals contain all necessary information and are complete in all respects as the Government does not intend to conduct discussions. Therefore, proposals shall represent the best and final offer of the Contractor. Proposals shall be submitted in two (2) separate volumes labeled: Volume I: Epoxy Services W91ZLK-22-R-0001 TECHNICAL Proposal Volume II: Epoxy Services W91ZLK-22-R-0001 PRICE Proposal Note: Offerors shall complete: FAR 52.212-3, Offeror Representations and Certifications- Commercial Items (Feb 2021); 52.204-24, Representation Regarding Certain Telecommunications and Video Surveillance Services or Equipment (OCT 2020); and 52.204-26, Covered Telecommunications Equipment or Services-Representation. (OCT 2020 on www.beta.sam.gov or provide a completed copy of the clauses with the proposal) Formatting. Single space Text Double Space Paragraphs 12-point minimum font size. Arial or New Times Roman fonts only. Table/illustrations 8-point min and landscape is acceptable. Margins: All Margins 1 inch. Gutter: 0 inches Header and Footer 1.5 inches Page Size: Width 8.5 inches and Height 11 inches (11 X 17 folded pages are acceptable for tables/graphic representations; however, each 11 X 17 page counts as two pages) Page Limitations: Volume I Technical � 5 pages limit and Volume II Price � 5 pages. NOTE: Pages that exceed the required page limitations will not be evaluated. Additional pages over the maximum allowed will be removed or not read and will not be evaluated by the Government. Restrictions: All information shall be confined to the appropriate volume. The Offeror shall confine submissions to essential matters and sufficient to define the proposal in a concise manner, to permit a complete and accurate evaluation of each proposal. Proprietary information shall be clearly marked. The following shall be included in the volumes: Volume I: Detail Technical Proposal shall be evaluated based on the following factors: a. Factor 1 - Technical Approach: The offeror�s proposal shall adequately describe and present a clear understanding of the requirements specified in the Performance Work Statement (PWS). To be rated as acceptable, offerors must provide documentation that demonstrates the offeror�s approach for meeting all of the requirements specified in the PWS. b. Factor 2 - Experience: Contractor shall demonstrate the ability to repair and recoat the floors and walls with chemical resistant epoxy for the CTF sump area, secondary holding tank area, and select laboratories and storage rooms to ensure containment of any hazardous or aggressive chemicals, should there ever be a leak in the system as specified in the PWS. To be rated as acceptable, the offeror must provide documentation to demonstrate recent experience repairing and recoating floors and walls with chemical resistant epoxy according to the PWS. Recent experience includes epoxy services performed within five (5) years (i.e. previous government contracts). BASIS FOR AWARD: The award will be made to one responsible offeror whose proposal is determined to be technically acceptable, and lowest priced. To receive consideration for an award, an �Acceptable� rating must be achieved for all the non-cost evaluation factors: Technical Approach and Experience. Price will be evaluated in accordance with FAR 15.404-1 Proposal analysis techniques. Price will be the determining factor for proposals rated as acceptable for the non-cost factors. Price analysis using one or more methods listed under FAR 15.404-1(b) will be used to ensure that the proposal will result in a fair and reasonable price. Volume II: Detailed Price Proposal to include the following elements: Header Page Company Name, DUNS, CAGE, Business Type/Size, ETN# and point of contact information to include: Name, title, email address, and telephone number including extension. INCLUDE ALL Information Below: CLIN 0001: Base Year Requirement � Epoxy Repair Services QTY: 1 Unit Cost: JOB FFP CLIN 0002: Option #1 � Epoxy Repair Services QTY: 1 Unit Cost: JOB FFP CLIN 0003: Option 2 � Epoxy Repair Services QTY: 1 Unit Cost: JOB FFP CLIN 0004: Option #3 � Epoxy Repair Services QTY: 1 Unit Cost: JOB FFP CLIN 0005: Option #4 � Epoxy Repair Services QTY: 1 Unit Cost: JOB FFP CLIN 0006: Option #5 � Epoxy Repair Services QTY: 1 Unit Cost: JOB FFP CLIN 0007: Option #6 � Epoxy Repair Services QTY: 1 Unit Cost: JOB FFP CLIN 0008: Option #7 � Epoxy Repair Services QTY: 1 Unit Cost: JOB FFP CLIN 0009: Option #8� Epoxy Repair Services 1 each QTY: 10 Unit Cost: JOB FFP PROVISIONS/CLAUSES: See Attachment 1 � Provisions/Clauses PERFORMANCE WORK STATEMENT: See Attachment 2 - Performance Work Statement QUALITY ASSURANCE SURVEILLANCE PLAN (QASP): See Attachment 3 - Quality Assurance Surveillance Plan LIST OF ATTACHMENTS: Attachment 1 - Provisions/Clauses Attachment 2 � Performance Work Statement Attachment 3 - Quality Assurance Surveillance Plan