Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Erosion Control and Landscaping

Active

Federal

Response Deadline08/03/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the installation of erosion control measures, seeding, mulching, and final landscaping activities to be completed after construction efforts at the New Cumberland facility. Work is targeted to prevent soil degradation and promote vegetation establishment in alignment with environmental protection standards, requiring skilled implementation of site-specific erosion mitigation techniques and hardscape integration. The scope demands precision in timing and materials to ensure long-term land stability and aesthetic completion following primary construction phases. The contract is classified as a subcontract under NAICS code 561730, indicating it falls within the waste management and remediation services sector. It is issued by the Department of Defense through the DDSP New Cumberland Facility, with performance located at ZIP code 17070-5002. The solicitation was posted on July 22, 2026, and responses are due by August 3, 2026, with all submissions required through the DIBBS platform using the reference number SPE8E826T4786. No set-aside provisions or specific organizational type requirements are indicated, meaning eligible subcontractors of any size may respond provided they meet the technical and regulatory conditions for the work.

General Info

Erosion control, seeding, mulching, and landscaping at New Cumberland facility under DOD subcontract.

Agency

Department Of Defense → DDSP NEW CUMBERLAND FACILITYView Agency

NAICS

561730 - Landscaping ServicesView NAICS

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 22

subcontract

Response DeadlineAug 3

Submission deadline

Response Deadline

08/03/2026, 05:00:00 PM UTCin 11 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DDSP NEW CUMBERLAND FACILITY

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → DDSP NEW CUMBERLAND FACILITY

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Installation of erosion control measures, seeding, mulching, and final landscaping after construction.

Similar Contracts

Same NAICS industry code

26-091 Landscape Cleanup and Bi-Weekly Maintenance for the TorranceThe California Department of Motor Vehicles is soliciting bids for a thirty-six-month contract to provide one-time landscape cleanup and biweekly maintenance services at the Torrance DMV Field Office, with an estimated cost of $37,531.00. Bidders must be certified as a Small Business by the State of California’s Office of Small Business and Disabled Veteran Enterprise Services and hold a valid C27 contractor license in good standing from the Contractors State License Board, with all subcontractors also required to possess active C27 licenses. The bidder must declare all intended subcontractors and their license numbers on official forms, and all licenses must remain valid throughout the contract term. In accordance with Executive Order N-6-22, bidders must certify they are not subject to U.S. or state economic sanctions against Russia or Russian entities, and any discovery of sanctioned status prior to contract execution will result in bid rejection. The solicitation is open starting July 22, 2026, with written questions due by July 27, 2026, at 10 a.m., and responses to those questions released by July 28, 2026, at 4:30 p.m. The final deadline for bid submission is July 30, 2026, at 10:00 a.m. The point of contact for inquiries is Feliciano Hernandez at the California DMV, reachable via email. All bids must be submitted through the CalEProcure portal, and compliance with all documentation and licensing requirements is mandatory for consideration. The contract performance location is the Torrance DMV Field Office in California.

California Department of Motor Vehicles

POSTED

about 13 hours ago

DEADLINE

26RFP67 Mowing / Landscape Maintenance ServicesWilliamson County is seeking qualified vendors to provide mowing and landscape maintenance services through solicitation 26RFP67, with proposals due by August 25, 2026. The contract is open to all eligible parties and requires full compliance with the specifications outlined in the request for proposal, including performance standards and service expectations. For any award exceeding $100,000, bidders must submit a bid bond equal to five percent of the total proposed contract value to ensure financial responsibility and commitment. The work will be performed across various locations within Williamson County, Texas, primarily centered in Georgetown, and all proposals must be submitted via the official online portal accessible through the provided link. Primary contacts for questions and communications include Fernando Ramirez and Joy Simonton, with Kerstin Hancock available as a secondary point of contact for purchasing-related inquiries.

WILLIAMSON COUNTY

POSTED

about 16 hours ago

DEADLINE

in about 1 month

26RFP67 Mowing / Landscape Maintenance ServicesWilliamson County, operating under the agency name Wilco in Texas, is soliciting proposals for Mowing and Landscape Maintenance Services through solicitation number 26RFP67, posted on July 22, 2026, with responses due by August 25, 2026. All proposals must comply with the detailed requirements outlined in the RFP, and contracts valued above $100,000 require a bid bond equal to five percent of the total contract amount. Services are to be performed within Williamson County, Texas, and inquiries should be directed to Fernando Ramirez, the primary point of contact, at fernando.ramirez@wilcotx.gov. Submissions must be made via the designated online portal at https://wilco.bonfirehub.com/opportunities/243342.

POSTED

about 16 hours ago

DEADLINE

in about 1 month

RFP 26-004 Roadside Tree TrimmingThe City of Auburn, Georgia is soliciting proposals for roadside tree trimming services under RFP 26-004, with the solicitation number PE-66422-NONST-2027-000000011. The request was posted on July 22, 2026, and responses are due by August 20, 2026, at 8:00 PM Eastern Time. All interested parties must ensure they have the most current version of the RFP and any associated addenda, which are exclusively posted on the City of Auburn’s official website. The scope of work involves maintaining trees along roadways within the jurisdiction of Auburn, Georgia, and performance will be limited to locations within the state. Proposals must be submitted in accordance with the terms outlined in the solicitation, and any questions or clarifications will be addressed through official updates on the website. Sunshine Palmer serves as the primary point of contact for this solicitation and can be reached via email at spalmer@cityofauburn-ga.org or by phone at 770-963-4002. The procurement falls under the state, local, or educational (SLED) organization category and is not subject to any set-aside designation. Bidders are required to monitor the City’s website regularly for updates, as all correspondence, amendments, and responses to inquiries will be published there and not through direct notification. The official portal for viewing the solicitation and related materials is accessible through the Georgia Department of Administrative Services procurement system using the provided UI link.

POSTED

about 19 hours ago

DEADLINE

27-005-LH Roadside and Sidewalk Spraying Project (8/20/26)The Macon-Bibb County Board of Commissioners is soliciting sealed bids for Roadside and Sidewalk Spraying services, with submissions due by 12:00 noon on Thursday, August 20, 2026, at the Procurement Department located in City Hall, Macon, Georgia. Bids must be submitted in original form along with a Flash Drive and accompanied by a bid bond of at least five percent of the bid amount to be considered valid. All bids will be publicly opened on the same day at 2:00 p.m. in the Board of Commissioners Chamber. Interested parties are encouraged to review bid documents at the Procurement Department or online via the Georgia Procurement Registry and Macon-Bibb County’s official purchasing website. A non-mandatory pre-bid conference is scheduled for July 29, 2026, and all questions must be submitted by July 31, 2026, via email to the designated contact. The procurement actively promotes participation from Minority, Women-Owned, and Disadvantaged Business Enterprises and supports their inclusion as subcontractors, with assistance available through the Director of Small Business Affairs. The solicitation number is PE-61100-NONST-2027-000000132, and the project is administered by the Macon-Bibb County Board of Commissioners under Georgia state jurisdiction.

Macon Bibb County Board of Commissioners

POSTED

about 20 hours ago

DEADLINE

Landscaping and Final Site WorkThe contract titled Landscaping and Final Site Work encompasses a full range of site development activities including topsoil placement, seeding, sodding, planting of vegetation, installation of sidewalks and curbing, and final grading to ensure proper site completion and drainage. These tasks are critical for transforming the construction site into a finished, aesthetically and functionally compliant landscape environment. Work is to be performed at Fletcher St in Whitinsville, Massachusetts, with a zip code of 01588, under the oversight of the Massachusetts Department of Public Works. The contract is classified as a subcontract with a NAICS code of 561730, aligning with landscape services. It was posted on July 22, 2026, and requires responses by August 5, 2026, at 7 PM. The solicitation is managed through the CommBuys platform, and all work must meet the technical and quality standards expected by the agency, though specific performance metrics or compliance requirements are not detailed in the provided data. Bidders must be prepared to deliver comprehensive site finishing services in a timely and professionally executed manner.

DPW24 - Department of Public Works

POSTED

about 23 hours ago

DEADLINE

Roadside Brushing and Vegetation ManagementThe contract titled Roadside Brushing and Vegetation Management involves the trimming and removal of overgrown vegetation along road edges and rights-of-way to ensure clear visibility, minimize fire risks, and prevent obstructions to traffic. This work is critical for maintaining safe and accessible transportation corridors, particularly in areas prone to wildland fires and dense vegetation growth. The scope requires consistent maintenance practices that align with environmental and safety standards to protect both public infrastructure and natural resources. This is a subcontract classified as a Total Small Business Set-Aside under SBA guidelines, exclusively available to small businesses as defined by the Small Business Administration. The North American Industry Classification System code is 561730, which corresponds to landscaping services. The contract was posted on July 22, 2026, with a response deadline of August 10, 2026, at 9:00 PM. The place of performance is specified as Hot Springs National Park, Arkansas, with the contracting agency being the USDA Forest Service under the Department of Agriculture. All work must be performed within this designated location, and the subcontractor is expected to comply with all federal, state, and local regulations governing vegetation management in protected federal areas.

Csa East 2 Usda-Fs

POSTED

DEADLINE

Landscaping and Site RestorationThis contract awards a small business subcontract for landscaping and site restoration services around a monument sign at the Natick location with ZIP code 01760. The scope requires grading, installing sod and mulch, and performing final site beautification to ensure aesthetic and functional restoration. Erosion control measures must be implemented and all debris and materials must be cleaned up upon completion. The solicitation is set aside exclusively for small businesses under the SBA's Total Small Business Set-Aside designation, as defined by FAR 19.5, with the NAICS code 561730 corresponding to landscape services. The contract was posted on July 22, 2026, and all proposals must be submitted by August 7, 2026, at 8:00 PM ET. The awarding agency is the Department of Defense through its W6QK Acc-Apg Natick office, and performance is required solely at the designated Natick site.

W6QK Acc-Apg Natick

POSTED

DEADLINE

Roadway Sanding and Traction TreatmentThe contract involves providing sand and de-icing agents to enhance traction on roadways during and after snow events, ensuring safe travel conditions. It is classified as a subcontract under a Total Small Business Set-Aside, meaning only small businesses are eligible to bid, as defined by the SBA. The North American Industry Classification System code 561730 identifies the work under general environmental services, specifically related to snow and ice control operations. The opportunity was posted on July 22, 2026, with responses required by 6:00 PM ET on July 23, 2026. Performance is designated to occur in Barre, though the specific state and postal details are not provided. The contracting agency is the Department of Defense through its W2SD Endist New England office, indicating this work supports defense-related infrastructure maintenance in the region.

W2SD Endist New England

POSTED

DEADLINE

in about 4 hours

Winter Snow and Ice Removal ServicesThe contract entails full-service snow plowing, ice removal, and de-icing operations at the Barre Falls Dam site during winter months to ensure safe and accessible roadways and entry points. Services must be performed promptly and effectively in response to winter weather conditions, with a focus on maintaining operational continuity and public safety at the facility. The work is being procured as a subcontract under a Total Small Business Set-Aside designation, meaning only small businesses qualifying under SBA guidelines are eligible to bid, aligning with federal small business support policies. The North American Industry Classification System code 561730 confirms the scope involvesjanitorial and other support services with a focus on snow and ice control. The opportunity was posted on July 22, 2026, with a response deadline of July 23, 2026, indicating an extremely short window for submissions, requiring rapid preparation and submission from interested small business contractors. The contracting agency is listed as W2SD Endist New England under the Department of Defense, with the place of performance specified as Barre. Despite the lack of detailed contact information or location specifics beyond the city, the urgency of the deadline and the critical nature of the work underscore the importance of immediate readiness and capability to mobilize equipment and personnel at the dam site following snow or ice events.

W2SD Endist New England

POSTED

DEADLINE

in about 4 hours

Erosion and Sediment Control InstallationThe contract requires the installation of silt socks and turbidity curtains along 570 linear feet to manage sediment runoff during earthwork activities and safeguard nearby water quality. The work is part of an erosion and sediment control effort intended to comply with environmental protections, focusing on preventing soil erosion and particulate discharge into waterways. The procurement is structured as a subcontract under a Total Small Business Set-Aside, designated for small businesses as defined by the SBA, with the NAICS code 561730 indicating it falls under environmental waste management services. The solicitation was posted on July 22, 2026, with responses due by August 18, 2026, and the work is to be performed in Richwood. The contracting agency is the USDA Forest Service through its CSA East 13 division, operating under the Department of Agriculture, though no specific point of contact or detailed location information beyond the city is provided.

Csa East 13 Usda-Fs

POSTED

DEADLINE

Snow Removal and Sanding Services, Barre Falls Dam, Hubbardston, Barre, and Oakham, MAThe U.S. Army Corps of Engineers - New England District is soliciting bids for snow removal and sanding services at the Barre Falls Dam Project Area encompassing Hubbardston, Barre, Rutland, and Oakham, Massachusetts. The contractor is responsible for providing all equipment, materials, labor, and transportation required to perform snow removal, roadway sanding, and walkway shoveling and sanding activities within the designated area. This procurement is exclusively set aside for small businesses under the SBA Total Small Business Set-Aside program, with the North American Industry Classification System code 561730 and a size standard of $9.5 million in annual revenue. All interested vendors must maintain an active registration in SAM.gov at the time of submission; failure to do so will result in non-responsiveness and automatic rejection. The solicitation was posted on July 22, 2026, with a strict response deadline of July 23, 2026, at 6:00 p.m. Eastern Time. The contracting office is located in Concord, Massachusetts, and inquiries should be directed to Alicia LaCrosse at the provided contact information. Services must be performed at the specified locations in Massachusetts, and proposals must comply fully with all solicitation requirements to be considered.

W2SD Endist New England

POSTED

DEADLINE

in about 4 hours

More opportunities from Department Of Defense → DDSP NEW CUMBERLAND FACILITY

Same awarding agency

Logistics, Transportation, and Destination DeliveryThe contract requires the secure transportation of structural steel plates using flatbed or heavy haul trucking to a designated DoDAAC destination at the New Cumberland facility, with a zip code of 17070-5002. All shipments must adhere to strict loading protocols to ensure cargo integrity and compliance with destination inspection standards, emphasizing safety and regulatory alignment throughout transit. The work falls under NAICS code 484220 for truck transportation of freight and is categorized as a subcontract with a response deadline of August 3, 2026, following a posting date of July 22, 2026. The contracting authority is the Department of Defense through its DDSP New Cumberland Facility, and performance is exclusively tied to the specified location, with no flexibility in delivery points.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 21 hours ago

DEADLINE

Packaging, Preservation, and Marking ServicesThe contract requires the provision of compliant packaging, preservation using method ZZ, and permanent marking of structural steel plates in accordance with military and ASTM standards, ensuring all components meet rigorous defense specifications for durability and traceability. Work must be performed to exact technical requirements that guarantee long-term integrity and identification of steel plates used in critical defense applications. The solicitation is categorized as a subcontract with a NAICS code of 332999 and is hosted by the DDSP NEW CUMBERLAND FACILITY under the Department of Defense, with performance designated at the New Cumberland location, zip code 17070-5002. The posting date is July 22, 2026, and proposals must be submitted by August 3, 2026, with no set-aside provisions specified. Bidders are expected to demonstrate capacity to deliver compliant packaging and marking solutions aligned with federal defense logistics standards.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 21 hours ago

DEADLINE

High-Strength Structural Steel Plate Supply (Grade DH36)The contract calls for the supply of structural steel plates measuring 0.375 inches thick and 60 by 240 inches in dimensions, manufactured to Grade DH36 standards in accordance with ABS rules, ensuring high strength and durability for demanding structural applications. Each plate must be accompanied by full mill certification and must comply with applicable military specifications, verifying material integrity, traceability, and performance under operational conditions. The delivery location is specified as New Cumberland, Pennsylvania, with the place of performance tied to the DDSP New Cumberland Facility under the Department of Defense. The solicitation, posted on July 22, 2026, requires proposals to be submitted by August 3, 2026, and is classified as a subcontract under NAICS code 331221 for rolled structural metal product manufacturing. The contract is managed without any set-aside designation, opening participation to all qualified vendors. Bidders must ensure alignment with military-grade requirements and certified material documentation to meet the stringent quality and compliance standards expected by the Defense Logistics Agency. All responses must be submitted through the designated DIBBS platform using the provided solicitation number.

Rolled Steel Shape Manufacturing

POSTED

about 21 hours ago

DEADLINE

Supply of Air Conditioning Filter ElementsThe contract calls for the supply and delivery of 69 units of air conditioning filter elements identified by NSN 4130015956356, with strict compliance required to military and hazardous materials standards. The solicitation is structured as a subcontract under a Total Small Business Set-Aside, designated for small businesses per FAR 19.5, and falls under NAICS code 333415 for heating, air conditioning, and commercial refrigeration equipment manufacturing. The issuing organization is the DDSP NEW CUMBERLAND FACILITY under the Department of Defense, with the place of performance located at New Cumberland, Pennsylvania, postal code 17070-5002. The opportunity was posted on July 22, 2026, and responses must be submitted by August 3, 2026, at 5:00 PM Eastern Time. Interested parties can access further details through the provided DIBBS portal link.

Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

about 21 hours ago

DEADLINE

Supply Chain and Delivery Logistics (Non-Regulated Transport)The contract requires the transportation and final delivery of packaged soldering components to the DDSP New Cumberland facility in Pennsylvania with a zip code of 17070-5002, ensuring all logistics operations comply with WAWF-compliant documentation standards and include proper kitting services. This subcontract, classified under NAICS code 484220 for general freight trucking, focuses on non-regulated transport and involves end-to-end supply chain coordination to meet precise delivery specifications without the need for special regulatory handling. The solicitation was posted on July 22, 2026, with a deadline for responses set for August 3, 2026, and is managed by the Department of Defense through the DDSP New Cumberland Facility. The work must be performed at the designated delivery location in New Cumberland, PA, and all contractors are expected to adhere to strict documentation protocols to ensure traceability and compliance within the Department of Defense logistics framework. No set-aside classification is specified, and the contract is open to eligible subcontractors capable of meeting the technical and procedural requirements for secure, timely delivery of sensitive electronic components.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 21 hours ago

DEADLINE

Hazardous Materials Packaging and Labeling ServicesThe contract requires the packaging and labeling of soldering and desoldering tips in strict compliance with federal hazardous materials communication regulations, including OSHA HAZCOM, GHS, DLA RP001, and DFARS 252.223-7001. All labeling must adhere to standardized hazard communication protocols to ensure proper identification of chemical risks associated with the products, with packaging designed to maintain integrity and regulatory alignment throughout transit and storage. The work must be executed with precision to meet Department of Defense standards for safety, documentation, and traceability of hazardous substances used in or present on these tips. The solicitation is issued under NAICS code 561910 for other support activities and is classified as a subcontract opportunity with a response deadline of August 3, 2026. Performance is to be conducted at the DLA New Cumberland Facility, identified by zip code 17070-5002. The contracting entity is the Department of Defense through the DDSP New Cumberland Facility, and all deliverables must fully align with DLA and federal regulatory requirements to ensure compliance across the defense supply chain. Participation requires demonstrated expertise in hazardous materials handling and labeling, with an emphasis on consistency, accuracy, and adherence to mandated documentation procedures.

Packaging and Labeling Services

POSTED

about 21 hours ago

DEADLINE

Manufacture of Electric Soldering Tips (TIP, ELECTRIC SOLDER)The contract requires the fabrication of electric soldering tips to meet stringent military-grade standards for durability, electrical conductivity, and material safety, ensuring full compliance with DLA RA001 and DFARS 252.223-7001 regulations. These components are critical for defense-related applications and must be manufactured with precision using approved materials and processes that guarantee long-term performance under demanding operational conditions. The work is classified as a subcontract under NAICS code 332215, indicating specialized metal fabrication activities within the broader industrial sector. The solicitation was posted on July 22, 2026, with a response deadline set for August 3, 2026, and the place of performance is designated as New Cumberland, Pennsylvania, with a zip code of 17070-5002. The contracting activity originates from the DDSP New Cumberland Facility under the Department of Defense, indicating a direct alignment with defense logistics and supply chain requirements. While no set-aside provisions or point of contact details are specified, the inclusion of federal regulatory frameworks underscores the strict adherence to compliance, quality control, and supply chain integrity expected from the vendor. All deliverables must meet unambiguous military specifications to ensure interoperability and reliability in critical defense systems.

Metal Kitchen Cookware, Utensil, Cutlery, and Flatware (except Precious) Manufacturing

POSTED

about 21 hours ago

DEADLINE

Manufacture of Desoldering Tips (TIP, SUCTION DEVICE)The contract requires the manufacture of precision desoldering tips that fully comply with the DLA Master List RA001 specifications, ensuring strict adherence to performance and quality standards. Production must meet rigorous requirements for thermal resistance, material composition, and dimensional accuracy, with comprehensive quality control and testing protocols applied at every stage to guarantee reliability and consistency. The delivered products must be suitable for use in defense and aerospace applications where precision and durability are critical. The solicitation, titled Manufacture of Desoldering Tips TIP, SUCTION DEVICE, was posted on July 22, 2026, with a response deadline of August 3, 2026, and is classified as a subcontract under NAICS code 332215. The contracting activity is the DDSP NEW CUMBERLAND FACILITY, under the Department of Defense, with performance exclusively located at the New Cumberland facility in Pennsylvania, zip code 17070-5002. All bids must be submitted through the DIBBS system using the provided solicitation link, and bidders are expected to demonstrate proven capability in producing high-precision metallurgical components meeting military-grade specifications.

Metal Kitchen Cookware, Utensil, Cutlery, and Flatware (except Precious) Manufacturing

POSTED

about 21 hours ago

DEADLINE

Transportation & Freight Logistics (FOB Origin to DLA New Cumberland)The contract requires the transportation of 70 units from the manufacturer to the DLA Distribution facility in New Cumberland, Pennsylvania, under FOB origin terms, meaning the buyer assumes all transportation risks and costs once the goods leave the supplier’s location. Full logistics execution must include comprehensive freight documentation, real-time delivery tracking, and invoicing compliant with the Web-Enabled Acquisition and Financial System, ensuring seamless integration with federal financial and supply chain processes. The contractor is responsible for end-to-end coordination to guarantee timely, accurate, and auditable delivery to the specified destination. The solicitation, issued under NAICS code 484220 for truck transportation, is classified as a subcontract and was posted on July 22, 2026, with responses due by August 3, 2026. The performance location is clearly identified as 17070-5002 in New Cumberland, Pennsylvania, under the oversight of the Department of Defense’s DDSP New Cumberland Facility. Although no specific set-aside or point of contact is provided, interested parties must submit responses through the designated DIBBS portal prior to the deadline to be considered for award.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 21 hours ago

DEADLINE

Hazardous Materials Compliance & Safety Data Sheet (SDS) PreparationThe contract requires identification of hazardous components within navigational lights and the preparation of Safety Data Sheets compliant with OSHA standards, ensuring all chemical and material risks are accurately documented and classified. The submitted SDS documents must align with federal regulatory requirements and be formally approved by relevant government authorities. Integration with MIL-STD-129 labeling standards is mandatory, ensuring that all hazardous materials are properly marked and coded for consistent identification, handling, and storage across defense logistics systems. This work supports safety, regulatory compliance, and operational readiness within Department of Defense environments. Performance is centered at the New Cumberland facility with a zip code of 17070-5002 and is classified under NAICS code 541620, indicating technical, scientific, or laboratory services related to environmental or safety compliance. The solicitation was posted on July 22, 2026, with a response deadline of August 3, 2026, and is structured as a subcontract under the Department of Defense’s DDSP New Cumberland Facility. No set-aside provisions are specified, making it open to eligible subcontractors capable of meeting the rigorous technical and regulatory demands of defense-grade hazardous materials documentation and labeling.

Environmental Consulting Services

POSTED

about 21 hours ago

DEADLINE

Specialized Packaging and Military-Compliant Labeling ServicesThe contract requires specialized packaging, preservation, and labeling services that fully comply with MIL-STD-2073-1E for defense shipments, ensuring all items are properly protected against environmental and physical damage during transit and storage. This includes the application of MIL-STD-129 compliant labeling with precise consignee markings and mandatory hazardous material warnings to meet U.S. Department of Defense regulatory standards. All work must be executed to ensure traceability, safety, and readiness for military logistics operations. The solicitation is issued as a subcontract under the NAICS code 325998, with a response deadline of August 3, 2026, and performance will be centered at the New Cumberland facility with a zip code of 17070-5002. The contracting authority is the Department of Defense through the DDSP New Cumberland Facility, and the work is critical to supporting defense supply chain integrity by ensuring all packaging and labeling meet exacting federal specifications for hazard communication and item identification.

All Other Miscellaneous Chemical Product and Preparation Manufacturing

POSTED

about 21 hours ago

DEADLINE

Manufacture of Navigational Lights (Prime-Level Assembly & Testing)The contract requires the full manufacturing, assembly, quality control, and testing of 70 units of the GLAMOX AQUA SIGNAL CORPORATION model 34000-7 navigational lights, all to be produced in strict accordance with military specifications. This includes adherence to MIL-STD standards for packaging and labeling to ensure compliance with Department of Defense requirements. The work is classified as a subcontract with the NAICS code 336413, indicating specialized manufacturing of marine and aerospace lighting systems. The place of performance is designated as New Cumberland, Pennsylvania, with a zip code of 17070-5002, and the contracting activity is managed under the DDSP NEW CUMBERLAND FACILITY, a unit of the Department of Defense. All deliverables must be completed and submitted by the response deadline of August 3, 2026, following a solicitation posted on July 22, 2026. There is no set-aside designation specified, and the contract does not indicate a prime contractor or point of contact detail.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 21 hours ago

DEADLINE