Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

ESD/EMI Protective Packaging Supply and Compliance

Active

Federal

Response Deadline07/31/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract seeks the supply of ESD/EMI protective packaging materials compliant with MIL-PRF-81705 and MIL-DTL-117 specifications, specifically requiring Type I barrier films and Type III wraps sourced exclusively from manufacturers listed on the QPL-81705. All materials must meet stringent military performance standards for electrostatic discharge and electromagnetic interference protection, ensuring the integrity of sensitive electronic components during storage and transportation. Subcontractors must demonstrate full adherence to quality control protocols and certification requirements tied to these military specifications. The opportunity is structured as a subcontract under the Department of Defense’s Active Devices Division, with performance required at the designated location in New Cumberland, Pennsylvania, zip code 17070-5002. The solicitation, identified by the reference number SPE7M526T336M, was posted on July 20, 2026, and responses are due by July 31, 2026. The NAICS code 326199 indicates the focus on other plastic product manufacturing. While no set-aside designation or point of contact is specified, bidders must ensure compliance with all relevant defense supply chain requirements and deliver materials that are fully qualified and traceable to approved sources.

General Info

Supply MIL-PRF-81705 Type I and III ESD/EMI packaging from QPL-81705 vendors for DoD in New Cumberland, PA by July 31, 2026

Agency

Department Of Defense → ACTIVE DEVICES DIVISIONView Agency

NAICS

326199 - All Other Plastics Product ManufacturingView NAICS

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 20

subcontract

Response DeadlineJul 31

Submission deadline

Response Deadline

07/31/2026, 05:00:00 PM UTCin 10 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → ACTIVE DEVICES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → ACTIVE DEVICES DIVISION

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply of MIL-PRF-81705 and MIL-DTL-117 compliant ESD/EMI protective packaging materials, including Type I barrier films and Type III wraps sourced from QPL-81705-approved manufacturers.

Similar Contracts

Same NAICS industry code

Poly Snow Deflector and Contoured Blade ComponentsThe contract seeks the supply of contoured polyethylene snow deflectors and associated polyethylene components engineered for durability under extreme winter conditions, with specific emphasis on UV resistance, impact tolerance, and optimal snow flow management for use on snowplow equipment. These components must meet rigorous performance standards to ensure reliable operation in Texas Department of Transportation’s winter maintenance operations, even in harsh and prolonged exposure environments. The materials are intended to enhance the efficiency and safety of snow removal systems by minimizing snow buildup and deflection on plow blades, reducing operational downtime and maintenance needs. The solicitation is classified as a subcontract under NAICS code 326199, with a short response window closing on July 24, 2026, and was posted on July 20, 2026. The Texas Department of Transportation is the procuring agency, and all components must be delivered to meet the operational demands of the state’s transportation infrastructure. While no set-aside provisions or specific geographic delivery requirements are detailed, the place of performance and contract execution are tied to Texas transportation maintenance needs, indicating a focus on locally applicable performance and logistical compatibility with existing plow systems.

Texas Department of Transportation

POSTED

about 19 hours ago

DEADLINE

ESD/EMI Protective Packaging SupplyThe contract calls for the supply of electrostatic discharge and electromagnetic interference protective packaging materials that meet the stringent requirements of MIL-PRF-81705, specifically including Type I and Type III barrier materials. All materials must be sourced exclusively from manufacturers listed on the Qualified Products List QPL-81705 to ensure compliance with military-grade standards for ESD and EMI protection. The packaging is intended for use in sensitive electronic applications where environmental and static control are critical to mission success. This subcontract is issued by the Active Devices Division under the Department of Defense, with performance required at a location in Columbus, Ohio with the zip code 43213. The solicitation was posted on July 20, 2026, and responses are due by July 31, 2026. The North American Industry Classification System code 326199 indicates the focus is on other rubber product manufacturing, aligning with the specialized nature of the protective packaging materials. There is no set-aside designation specified, and all qualified vendors meeting the technical and sourcing requirements are eligible to respond.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Supply of 250 mL Polyethylene Laboratory Wash BottlesThe contract calls for the manufacture and delivery of 250 mL polyethylene laboratory wash bottles to support the Department of Defense Medical Supply Chain, with strict compliance required for federal packaging, labeling, and hazardous materials handling regulations. The bottles must meet all applicable standards to ensure safe use in medical and laboratory environments, with performance and delivery obligations tied to the specified location in San Diego, California, ZIP 92135-5000. This is a subcontract under NAICS code 326199, with a response deadline of July 27, 2026, and the solicitation was posted on July 20, 2026, indicating a limited window for potential vendors to submit proposals. All activities must align with the medical supply chain’s operational and regulatory expectations under the DOD framework.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

Supply of 4 oz Screw Cap Cylindrical BottlesThe contract calls for the supply and delivery of 4 oz cylindrical plastic bottles with screw caps, manufactured and labeled to meet strict military packaging and labeling standards. Compliance with ASTM D3951 for packaging, FED-STD-313 for packaging and marking, MIL-STD-129 for labeling of military property, and DLA Medical Marking Standard No. 1 is mandatory, ensuring these containers meet the rigorous requirements for use within the Department of Defense medical supply chain. The bottles must be properly identified, marked, and packaged to enable seamless integration into existing military logistics systems without modification or rework. The procurement is designated as a subcontract under NAICS code 326199, with a response deadline of July 27, 2026, and is associated with the Medical Supply Chain MD Surg FSF under the Department of Defense. Performance is required at Pearl Harbor, HI 96860-5033, indicating the end-use location is a key military medical facility. The solicitation is publicly accessible through the DIBBS system, and while no specific set-aside type is listed, all bidders must be prepared to demonstrate full adherence to the technical and regulatory specifications outlined in the referenced standards to qualify for award.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Insulation Blanket Manufacturing and SupplyThe contract seeks the manufacture and supply of 100 feet of insulation blanket, Part Number AE102-8, with a tolerance of ±10%, designed to meet stringent military and quality standards for use in critical applications. The item must comply with all technical and performance specifications required for defense-related environments, ensuring reliability under extreme conditions. The procurement is issued as a subcontract under NAICS code 326199, and performance is to be completed at the designated place of performance in Cherry Point, North Carolina, with a zip code of 28533-5040. The solicitation was posted on July 20, 2026, and responses are due by July 28, 2026, providing vendors a limited window to submit proposals. The contracting activity is managed by the ASC Commodities Division under the Department of Defense, indicating the high-priority nature of the requirement and the expectation for full compliance with federal and defense acquisition regulations.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Tarps and Heavy-Duty Coverings SupplyThe contract entails the supply of military-grade tarpaulins identified by NSN 2540016822441, specifically engineered to meet stringent federal standards for packaging, durability, and labeling to support secure transport and storage operations. These heavy-duty coverings are critical for protecting sensitive military equipment and materials under demanding environmental conditions, ensuring longevity and operational readiness across all branches of the Department of Defense. The items must comply with all applicable regulatory and technical specifications to guarantee interoperability and reliability in deployment scenarios. This is a subcontract under the Defense Logistics Agency, classified under NAICS code 326199 for other rubber product manufacturing, and was posted on July 20, 2026. While no specific solicitation number or set-aside details are provided, the award is tied to the contract reference SPE7L226V0968 and will support DLA’s broader logistics and supply chain objectives. Performance location and point of contact information are not specified, but the tarpaulins are intended for use across military installations and operational areas as required by the Department of Defense.

Defense Logistics Agency

POSTED

DEADLINE

Supply of Preformed Packing Materials (NSN: 5330000120244)The contract involves the supply and delivery of 39 units of preformed packing material identified by NSN 5330000120244, meeting the specifications outlined in MIL-STD-129. These materials are destined for the Defense Logistics Agency warehouse located in Tracy, California, and are intended for official military use. The requirement is structured as a subcontract under the NAICS code 326199, which pertains to other plastics product manufacturing, indicating the custom nature of the packing components. The solicitation was posted on July 20, 2026, and is managed by the Department of Defense through the Defense Logistics Agency. While no specific award or subcontractor details are provided in the data, compliance with MIL-STD-129 ensures proper labeling, packaging, and documentation for military logistics systems. The contract does not include a set-aside designation, and no point of contact or detailed delivery schedule is specified in the available information. All units must be delivered to the designated DLA facility in Tracy, CA, with full adherence to federal supply standards.

Defense Logistics Agency

POSTED

DEADLINE

Thermal Insulation Blanket Supply (Special Purpose)The contract seeks the manufacture and supply of special-purpose thermal insulation blankets designated by NSN 5330012467566, adhering strictly to military specifications for packaging, marking, and hazardous material labeling to ensure safety and compliance during transport and storage. These blankets are intended for specialized defense applications and must meet exacting performance and durability standards required by the Department of Defense. The solicitation is structured as a subcontract opportunity under NAICS code 326199, indicating it falls within other rubber product manufacturing, and is open for responses until August 4, 2026, with the request posted on July 20, 2026. Performance is expected to support the Land Supply Chain within the Department of Defense, though no specific place of performance or point of contact is detailed in the provided information. All submitted proposals must fully align with the technical and regulatory requirements outlined in the associated military specifications.

LAND SUPPLY CHAIN

POSTED

DEADLINE

ESD/EMI Protective Packaging SupplyThe contract pertains to the supply of electrostatic discharge and electromagnetic interference protective packaging materials that meet stringent Department of Defense specifications, specifically MIL-DTL-117 and MIL-PRF-81705, ensuring compliance with military standards for safeguarding sensitive electronic components. These materials must be DOD-qualified and are intended for use in securing and transporting equipment vulnerable to static discharge and electromagnetic interference, critical in defense and aerospace operations. The solicitation is categorized as a subcontract under NAICS code 326199, indicating it falls under other plastic product manufacturing, and the performance location is designated as Columbus, Ohio, with a zip code of 43213. The opportunity was posted on July 20, 2026, with a response deadline of July 31, 2026, allowing potential vendors a brief window to submit proposals. The contracting activity is under the Active Devices Division of the Department of Defense, which oversees procurement for specialized electronic component protection needs. While no set-aside designation or specific point of contact is provided, interested suppliers must adhere strictly to the technical requirements outlined in the referenced military standards and ensure their packaging solutions are certified and consistently compliant with DOD expectations. The official solicitation can be accessed through the DIBBS portal using the provided link.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Medical Packaging and Unit Container SealingThe contract requires the packaging of pharmaceutical products in sealed unit containers and commercial shipping containers in strict compliance with MIL-STD-2073-1E standards and all applicable export regulations. The work involves ensuring that each pharmaceutical unit is properly sealed, labeled, and protected against environmental factors to maintain sterility and integrity throughout transport and storage. Packaging must meet military-grade specifications for durability, traceability, and handling under diverse logistical conditions, including international shipment. The scope encompasses all phases from initial packaging to final containerization for distribution, ensuring alignment with defense supply chain requirements. This is a subcontract opportunity posted by the Department of Defense under the Medical Supply Chain Pharm FSA, with a North American Industry Classification System code of 326199 for other plastic product manufacturing. The solicitation was released on July 20, 2026, and responses are due by July 27, 2026. There is no specified set-aside designation, and the place of performance details are not provided, indicating potential flexibility in location as long as performance meets federal logistics standards. Interested parties must access the full solicitation through the DIBBS portal to verify technical requirements, documentation, and delivery expectations.

MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

DEADLINE

Hazardous Materials Packaging SupplierThe contract seeks a supplier to provide 8oz containers, either plastic or glass, that meet the stringent compliance standards of PPP-C-186 and MIL-STD-2073-1E for the secure storage and transportation of flammable and corrosive soldering flux. These containers must be engineered to withstand the hazards associated with hazardous materials, ensuring safety during handling, storage, and transit under military specifications. The requirement is issued as a subcontract under the NAICS code 326199, indicating it is for other plastics product manufacturing, and is managed by the Defense Logistics Agency on behalf of the Department of Defense. Performance of the contract is expected to occur at FPO with a ZIP code of 96672, and proposals must be submitted by the deadline of July 31, 2026, with the solicitation posted on July 20, 2026. Compliance with packaging and labeling standards is critical to meet military logistics and safety requirements for hazardous substances.

Defense Logistics Agency

POSTED

DEADLINE

Supply of Hazardous Material Absorbent PadsThe contract pertains to the manufacture and supply of commercial off-the-shelf absorbent pads designated for hazardous materials, identified by NSN 4235014410246 and manufacturer part number WP1818. These pads must be produced in full compliance with all relevant specifications and are required to be packaged, labeled, and shipped in accordance with established regulatory and military standards to ensure safe handling and operational readiness. The items are intended for use by the Department of Defense through the Defense Logistics Agency and must meet stringent quality and performance criteria to support hazardous material response and containment needs. All deliverables under this subcontract must adhere to strict packaging and labeling requirements, including proper identification, hazard communication, and documentation for seamless integration into defense logistics systems. The work is governed under NAICS code 326199, which classifies it under other plastics product manufacturing, and the contract is scheduled with a posted date of July 20, 2026. Performance is expected to align with Department of Defense operational timelines and supply chain protocols, with delivery coordinated through the DLA’s logistics framework. The contract does not specify a set-aside status or a designated point of contact, and the place of performance is not geographically identified, indicating that fulfillment may occur across multiple approved manufacturing or distribution locations to meet procurement demands.

Defense Logistics Agency

POSTED

DEADLINE

More opportunities from Department Of Defense → ACTIVE DEVICES DIVISION

Same awarding agency

WAWF Invoicing and Payment Processing ServicesThe contract requires the submission of electronic invoices and receiving reports through the Wide Area WorkFlow system in strict adherence to DFARS 252.232-7006, utilizing either the Invoice 2in1 format or the standard electronic formats prescribed by the Department of Defense. All submissions must be accurately structured and timely delivered to ensure compliance and proper payment processing. The work is scoped under a subcontract and is assigned the NAICS code 541512, indicating a focus on computer systems design and related services. Performance is tied to the location of New Cumberland with ZIP code 17070-5002, and the contracting activity falls under the Active Devices Division of the Department of Defense. The solicitation was posted on July 20, 2026, with responses due by August 4, 2026, and participation is conducted via the DIBBS portal using the provided solicitation number.

Computer Systems Design Services

POSTED

DEADLINE

Military Packaging, Marking, and Shipping Compliance ServicesThe contract requires comprehensive packaging, preservation, and marking services fully aligned with MIL-STD-2073-1E and MIL-STD-129 standards, ensuring military-grade compliance for all handled items. Specifically, dry preservation method 10 must be applied to protect equipment from environmental degradation, while unit packaging under Pack Code U ensures items are individually prepared for efficient handling and distribution. All packages must be marked using DoDAAC-based routing protocols to guarantee accurate tracking and delivery through defense logistics networks. The work is tied to a subcontract under the ACTIVE DEVICES DIVISION of the Department of Defense, with performance centered at New Cumberland, Pennsylvania, ZIP 17070-5002. The North American Industry Classification System code 493190 indicates the service falls under Other Support Activities for Transportation, emphasizing logistics and handling specialization rather than manufacturing. Proposals must be submitted by August 4, 2026, with the solicitation open since July 20, 2026, and no set-aside provisions specified for small business or other categories.

Other Warehousing and Storage

POSTED

DEADLINE

Manufacturing of Military-Grade Electrical Connector Body, ReceptacleThe contract requires the manufacture of 18 units of a military-spec electrical connector body, receptacle, identified by Part No. A-A-55463-06 and NSN 5935-01-323-6812, fully compliant with A-A-55463A Revision A, Generation 4, and DLA RA001 specifications. The work must be performed to exacting military standards ensuring reliability and performance under operational conditions, with the finished products destined for use in defense applications. The NAICS code 334417 indicates this falls under the category of Electronic Component and Product Manufacturing, emphasizing precision fabrication and adherence to technical and quality control requirements. The solicitation is classified as a subcontract and was posted on July 20, 2026, with responses due by August 4, 2026. Performance is to occur at the facility located in New Cumberland, Pennsylvania, with a zip code of 17070-5002. The contract is managed by the Active Devices Division under the Department of Defense, which oversees procurement for critical military electronics components. The precise location of performance and the strict compliance requirements indicate that the contractor must have the necessary certifications and capabilities to meet defense-grade production and inspection standards. The contract will be administered through the DLA DIBBS system using the referenced solicitation number SPE7M526Q0741.

Electronic Connector Manufacturing

POSTED

DEADLINE

Small Business Subcontracting and Accelerated Payments AdministrationThe contract requires comprehensive administration of subcontracting activities designated exclusively for small businesses under a Total Small Business Set-Aside, as defined by FAR 19.5, with the NAICS code 541611 for management consulting services. The performance location is situated in Cherry Point, North Carolina, with all subcontracting obligations governed by the Federal Acquisition Regulation, particularly the requirement to implement accelerated payments as specified in FAR 52.232-40. The contractor must systematically track all small business subcontractors, maintain accurate records, and submit mandatory reports through the Electronic Subcontracting Reporting System to ensure full compliance with federal guidelines. The contract emphasizes strict adherence to payment timelines for small business subcontractors, with the expectation that payments are accelerated in accordance with the specified regulation. The effort is managed under the Department of Defense and administered by the Active Devices Division, with a response deadline of July 31, 2026, following the posting date of July 20, 2026. No solicitation number is listed, reinforcing the focus on the regulatory structure and administrative rigor required to uphold small business participation and payment integrity. The place of performance and the nature of the work indicate a high degree of coordination with government systems and compliance reporting under defense contracting protocols.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Prohibited Telecommunications Equipment Screening and ReplacementThis contract requires the identification and replacement of prohibited telecommunications equipment sourced from vendors such as Huawei and ZTE across IT assets, in full compliance with DFARS 252.204-7018. The work involves conducting thorough audits to detect any covered telecommunications equipment or services that are deemed a security risk, followed by the timely removal and substitution with approved alternatives to ensure system integrity and regulatory adherence. The project must be executed within the designated place of performance at Cherry Point, North Carolina, with strict attention to timelines and audit accuracy to meet federal defense specifications. The opportunity is structured as a small business set-aside under the SBA’s Total Small Business Set-Aside category, exclusively available to small businesses as defined by FAR 19.5, and is classified under NAICS code 541511 for computer systems design services. The solicitation was posted on July 20, 2026, with responses due by July 31, 2026, and is issued under the Department of Defense through the Active Devices Division. Contractors must be prepared to deliver compliant solutions under subcontract terms and demonstrate established processes for equipment verification, documentation, and secure logistics during the replacement phase.

Custom Computer Programming Services

POSTED

DEADLINE

Cybersecurity Compliance and CMMC ImplementationThis contract requires the implementation of NIST SP 800-171 cybersecurity controls to achieve compliance with CMMC Level 2 standards, focused on system hardening, robust access controls, and comprehensive audit logging across all relevant systems and environments. The effort is scoped to ensure the contractor meets the Department of Defense’s cybersecurity requirements for handling controlled unclassified information, with the ultimate goal of passing a formal CMMC Level 2 assessment. Work must be performed at Cherry Point, North Carolina, with all security measures aligned to federal guidelines and tailored to the specific infrastructure and operational context of the Active Devices Division. The contract is structured as a small business set-aside under SBA requirements, exclusively available to businesses classified as total small businesses as defined by FAR 19.5, and falls under NAICS code 541512 for computer systems design services. The solicitation was posted on July 20, 2026, with responses due by July 31, 2026, and all proposals must demonstrate clear expertise in NIST framework application, CMMC readiness, and defense contracting compliance. The successful vendor will be responsible for documenting control implementation, maintaining audit trails, and providing evidence of continuous compliance, all in support of securing sensitive defense-related systems at the specified location.

Computer Systems Design Services

POSTED

DEADLINE

Hazardous Materials Labeling and Safety ComplianceThe contract requires the provision of hazard warning labels and safety data sheets that fully comply with OSHA’s Hazard Communication Standard and DFARS clause 252.223-7001, ensuring proper identification and communication of chemical hazards across military supply chains. All labeling must adhere to MIL-STD-129 specifications for uniformity and durability, and the vendor must implement a robust system for managing and maintaining up-to-date safety data sheets for all hazardous materials. This subcontract is set aside entirely for small businesses as defined by the SBA and is categorized under NAICS code 541690 for other scientific and technical consulting services. The performance location is designated as Cherry Point, North Carolina, with a response deadline of July 31, 2026, and the solicitation is issued by the Department of Defense’s Active Devices Division through the DIBBS platform.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE

Domestic Freight & Logistics (U.S.-Flag Vessel Requirement)The contract requires the transportation of goods via U.S.-flag vessels for overseas shipments, with a clear mandate to use American-owned and operated vessels for international freight. For domestic logistics, the contractor must coordinate the movement of cargo to DLA Distribution in Columbus, Ohio, ensuring timely and secure delivery to the specified zip code 43213. The scope encompasses end-to-end logistics planning and execution, including handling, scheduling, and compliance with U.S. maritime regulations for overseas segments. All work must align with the North American Industry Classification System code 484220, which pertains to general freight trucking, and is structured as a subcontract under the Department of Defense’s Active Devices Division. Responses are due by July 31, 2026, following a posting date of July 20, 2026, and the solicitation is accessible through the DIBBS platform for potential bidders.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Compliance & Cybersecurity SupportThe contract seeks advisory or audit support to ensure adherence to critical cybersecurity standards including DFARS 252.204-7012, NIST SP 800-171, and CMMC Level 2 requirements. The primary focus is on facilitating a thorough self-assessment process and generating comprehensive documentation to demonstrate compliance with these defense-related cybersecurity frameworks. This support is essential for organizations handling controlled unclassified information and must be delivered with precision to meet federal contractual obligations. The work is classified as a subcontract under NAICS code 541611, with performance centered in Columbus, Ohio, 43213. The solicitation was posted on July 20, 2026, and responses are due by July 31, 2026, under the purview of the Department of Defense’s Active Devices Division. No specific set-aside type is indicated, and the contract aims to secure expert services that will directly contribute to the contractor’s ability to validate and maintain cybersecurity compliance in alignment with Department of Defense mandates.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Supply of Linear Microcircuit (NSN: 5962011999837)The contract calls for the procurement and delivery of twenty units of a linear microcircuit identified by National Stock Number 5962011999837, which must fully comply with applicable military specifications. Each unit requires proper packaging and labeling to meet defense logistics standards, ensuring traceability and readiness for military use. The finished product must be shipped to DLA Distribution in Columbus, Ohio, with the delivery address designated by the zip code 43213. This is a subcontract under the Department of Defense’s Active Devices Division, classified under NAICS code 334418 for other semiconductor and related device manufacturing. The solicitation was posted on July 20, 2026, with responses due by July 31, 2026, leaving a narrow window for qualification and proposal submission. While no set-aside designation or point of contact details are provided, the requirement is specific, time-sensitive, and aligned with defense supply chain protocols, emphasizing strict adherence to technical and logistical directives for military-grade electronics.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

DEADLINE

Inspection and Quality Assurance Services (MIL-STD-1916 Compliance)The contract requires the execution of final inspection services for capacitors under strict quality standards, specifically employing MIL-STD-1916 or ASQ H1331 sampling plans to ensure zero non-conformances and full compliance with accepted quality levels for critical, major, and minor defects. The work must be performed to exacting military and industry benchmarks, emphasizing the absolute absence of defects in every inspected unit, making precision and rigorous quality control paramount. The inspection process is non-negotiable in its requirements, leaving no room for tolerance in adherence to the specified standards. The contract is a subcontract under the Department of Defense’s Active Devices Division, with performance expected at a designated location in New Cumberland, Pennsylvania, ZIP code 17070-5002. Issued under NAICS code 541330 for Engineering Services, the opportunity is open for response until July 31, 2026, with posting dated July 20, 2026. All submissions must meet the demanding compliance criteria without deviation, and bidders must be fully prepared to deliver flawless inspection outcomes aligned with defense-quality expectations.

Engineering Services

POSTED

DEADLINE