Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, December 9 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

ESD-Sensitive Electronic Packaging and Marking

Open

Federal

Response Deadline11/23/2026, 09:00:00 AM PST

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract, titled ESD-Sensitive Electronic Packaging and Marking, involves providing specialized packaging, cushioning, and marking services for ESD-sensitive electronic devices. The work supports prime contractors fulfilling DLA supply contracts for the USCG, requiring strict adherence to DOD-qualified protective packaging standards per MIL-PRF-81705, as well as marking and labeling requirements defined by MIL-STD-129 and MIL-STD-2073-1E. The final deliverable is a fully packaged and marked shipment ready for transport. Managed by the DLA Weapons Support Maritime Supply Chain under the Department of Defense, the project is categorized under NAICS code 488410. Performance will take place in San Francisco, California. The solicitation was posted on November 12, 2026, with a response deadline set for November 23, 2026.

General Info

Agency

Department Of Defense → DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

NAICS

488410 - Motor Vehicle Towing

Place of Performance

SAN FRANCISCO, CA, 94130-9309, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7M1-27-T-2609.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

CIRCUIT CARD ASSEMBLY

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 12

subcontract

Response DeadlineNov 23

Submission deadline

Response Deadline

11/23/2026, 09:00:00 AM PSTin 11 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs specialized packaging, cushioning, and marking for an ESD-sensitive electronic device for prime contractors delivering DLA supply contracts to the USCG. Applies DOD-qualified protective packaging per MIL-PRF-81705 using ESD barrier materials and cushioning. Executes marking and labeling per MIL-STD-129 and MIL-STD-2073-1E. Delivers a fully packaged and marked shipment ready for transport.

Similar Contracts

Same NAICS industry code

MIL-SPEC Packaging and Logistics for Aerospace AssembliesThis subcontract for MIL-SPEC Packaging and Logistics for Aerospace Assemblies supports prime contractors on DLA Weapons Support ASC projects. The scope of work involves performing specialized packaging and marking for assemblies, specifically adhering to RP001 for packaging and MIL-STD-129 for marking and labeling. The contractor is responsible for utilizing MIL-SPEC materials and palletization standards to ensure all assemblies are fully prepared for shipment to Tinker AFB. Critical requirements include the handling of hazardous materials in accordance with FED-STD-313 and TQ requirement IP025. This Department of Defense effort falls under NAICS code 488410 and requires strict adherence to military specifications to ensure the safe and compliant transport of aerospace components.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Defense-Standard Packaging and CratingThis subcontract for Defense-Standard Packaging and Crating involves providing specialized packaging and palletization services for prime contractors supporting the DLA Weapons Support ASC. The scope of work requires the processing of 16 shipment-ready units containing sensitive hydraulic equipment. All work must be performed in strict accordance with ASTM D3951 for packaging and RP001 for palletization, while ensuring all markings and labels comply with MIL-STD-129. The contractor is responsible for utilizing MIL-SPEC crates and moisture barriers to maintain equipment integrity and must adhere to the DLA Master List of Technical and Quality Requirements. This opportunity is issued by the Department of Defense under NAICS code 488410, with a response deadline set for December 10, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Medical Grade Packaging and Distribution ServicesThis subcontract for Medical Grade Packaging and Distribution Services involves providing specialized military-grade packaging for prime contractors supporting DLA medical supply contracts. The scope of work requires packing items into sealed unit containers and commercial exterior shipping containers in strict accordance with MIL-STD-2073-1E and special packaging instructions MPPWN00001. The service provider is responsible for coordinating FOB Destination delivery and ensuring that all fully packaged and marked shipments are delivered to designated inspection points at Fort Campbell, Kentucky, and Fort Bliss, Texas. This effort is managed under the Department of Defense Medical Supply Chain FSH with a focus on NAICS code 488410.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

Medical Grade Packaging and Shipping ServicesThis subcontract for Medical Grade Packaging and Shipping Services supports the Department of Defense Medical Supply Chain MD SURG FSF. The selected provider will perform specialized military-grade packaging and delivery for prime contractors, ensuring that units are secured in sealed medical-grade containers and commercial exterior shipping containers. All work must strictly adhere to MIL-STD-2073-1E, RP001 packaging requirements, and Medical Marking Standard No. 1. The scope of work involves the secure delivery of medical kits to designated locations at Fort Carson, Colorado, and Fort Bliss, Texas. This opportunity falls under NAICS code 488410 and was posted on November 12, 2026, with a response deadline of November 18, 2026.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

MIL-SPEC Packaging and Sealing ServicesThis subcontract for MIL-SPEC Packaging and Sealing Services supports prime contractors on DLA Weapons Support projects. The scope of work involves the specialized packaging and sealing of gaskets using medium-duty, waterproof, greaseproof, and opaque bags to prevent ultraviolet deterioration. All work must be performed in strict accordance with MIL-DTL-117, Type II, Class C, Style 1 and adhere to MIL-STD-2073-1E packaging data standards. The selected provider is responsible for delivering the gaskets fully packaged, sealed, and marked for shipment to the designated destination facility. This project is managed under the Department of Defense for the DLA Weapons Support Land Supplier Opns Vehicle Spt, with the place of performance located in New Cumberland, Pennsylvania. The response deadline for this opportunity is November 23, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

MIL-SPEC Packaging and Palletization ServicesThis subcontract for MIL-SPEC Packaging and Palletization Services supports prime contractors on DLA Aviation projects through the Department of Defense. The scope of work involves providing specialized packaging materials and performing professional packing and palletization to prepare units for OCONUS shipment. All deliverables must strictly adhere to MIL-STD-2073-1 for materials, ANSI/MH1-2016 for pallets, and MIL-STD-147 for palletized unit loads to ensure full compliance with military standards. The service provider is responsible for delivering fully packed, labeled, and palletized shipments ready for FOB Destination delivery. This opportunity is categorized under NAICS code 488410 and is associated with the DLA Aviation facility in Philadelphia. Interested parties must submit their responses by the deadline of December 11, 2026.

Pa DLA Aviation At Philadelphia

POSTED

about 5 hours ago

DEADLINE

MIL-SPEC Packaging and Shipping ServicesThis subcontract for MIL-SPEC Packaging and Shipping Services supports prime contractors on DLA Aviation projects under the Department of the Navy. The scope of work involves providing specialized packaging and logistics, specifically adhering to MIL-STD-2073 and MIL-STD-129 standards. Key technical requirements include the use of MIL-SPEC containers, vacuum sealing, and electrostatic discharge protection to ensure the integrity of the materials. The service provider is responsible for delivering final packaged units ready for FOB Destination delivery to DLA New Cumberland. Performance will take place in Philadelphia, Pennsylvania. Interested parties must respond by the deadline of December 14, 2026, for this opportunity categorized under NAICS code 488410.

Pa DLA Aviation At Philadelphia

POSTED

about 12 hours ago

DEADLINE

in about 1 month

Military-Standard Packaging and MarkingThis subcontract opportunity with the Department of the Navy's Navsup Weapon Systems Support involves providing specialized packaging and marking services for prime contractors. The primary objective is to prepare video recorders for shipment to government depots, ensuring all units are properly packed for stock and overseas transport. All work must be performed in strict accordance with MIL-STD-2073 and MIL-STD-129 standards to ensure compliance with military specifications. The project will be executed in Philadelphia, Pennsylvania, under NAICS code 488410. Interested parties should note that the posting date is November 12, 2026, with a response deadline set for November 27, 2026.

Navsup Weapon Systems Support

POSTED

about 12 hours ago

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services supports the Department of Defense through the DLA Weapons Support Maritime Supply Chain. The scope of work involves providing military-grade packaging and marking for prime contractors, specifically adhering to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. To ensure quality and safety, the contractor must utilize heat-sealed barrier bags for FOD prevention and comply with FAA Bare Item Marking Requirements RQ046. The final deliverables consist of fully packaged and marked shipments prepared for FOB Origin delivery to DLA Distribution DDSP New Cumberland. This project falls under NAICS code 488410 and is centered in New Cumberland, Pennsylvania. Interested parties should note the response deadline of November 23, 2026.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract opportunity is issued by the Department of Defense under the DLA Weapons Support Strategic Acquisition Program Directorate for specialized packaging and marking services for aerospace hardware. The selected provider will be responsible for packaging units in accordance with MIL-STD-2073-1E and marking shipments per MIL-STD-129, utilizing MIL-SPEC materials and compliant labeling systems. The primary objective is the delivery of packaged and marked spark plugs prepared for FOB Origin shipment. This procurement is designated as a Total Small Business Set-Aside under NAICS code 488410. Interested parties must submit their responses by the deadline of November 27, 2026.

DLA WEAPONS SUPPORT STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

MIL-SPEC Packaging and Preservation ServicesThis subcontract for MIL-SPEC Packaging and Preservation Services supports prime contractors on DLA Weapons Support ASC projects. The scope of work requires the preservation, packaging, and marking of three aircraft skins to ensure they are ready for shipment. All activities must strictly adhere to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, utilizing approved MIL-SPEC wrap, cushioning materials, and four-corner protection. The use of commercial or bulk packaging is explicitly prohibited. The project is managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div, with performance taking place at Tinker AFB. Interested parties must note the response deadline of November 19, 2026. The contract is categorized under NAICS code 488410.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Aerospace Component Packaging and Marking ServicesThe Aerospace Component Packaging and Marking Services subcontract involves providing military-grade packaging and identification marking for prime contractors supporting DLA Weapons Support ASC projects. The scope of work requires the packaging of 71 units according to ASTM D3951 standards and the preparation of deliveries in compliance with MIL-STD-129. Additionally, the contractor must utilize specialized equipment to apply identification markings following MIL-STD-130N and maintain a thorough understanding of the DLA Master List of Technical and Quality Requirements. This project is managed under the Department of Defense for the DLA Weapons Support ASC Supplier OE and AF Division. All completed units are to be delivered to DLA Distribution Warner Robins, with the place of performance located at Robins Air Force Base. The subcontract is categorized under NAICS code 488410.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

Same awarding agency

Circuit Card Assembly Supplier (Zetron P/N 950-9692)This subcontract involves the procurement and delivery of one Commercial Off-The-Shelf Circuit Card Assembly, specifically NSN 5998016199553, for prime contractors supporting DLA supply contracts. The supplier must verify that the component is a genuine Zetron Inc part number 950-9692 and ensure the item is delivered FOB Origin to San Francisco. The contractor is required to maintain CMMC Level 2 Self-Assessment certification and adhere to strict regulatory standards, including the Buy American and Balance of Payments Program and the prohibition on the intentional addition of mercury. This requirement is managed under the Department of Defense through the DLA Weapons Support Maritime Supply Chain.

Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

DEADLINE

Supplier of Retaining Rings (NSN 5325-01-501-9431)This subcontract involves the manufacture or procurement of seven specialized retaining rings for the DLA Weapons Support Maritime Supply Chain. The components must strictly adhere to part number 2144-0114 and NSN 5325-01-501-9431 as specified in the DLA Master List of Technical Data. Due to the technical nature of the parts, the supplier must utilize precision machining equipment and ensure full compliance with the Buy American and Balance of Payments Program. The final deliverables are to be shipped to Hill AFB, with packaging and labeling meeting ASTM D3951, MIL-STD-129, and RP001 standards. This opportunity falls under NAICS code 332722 and is managed by the Department of Defense. Interested parties must submit their responses by November 20, 2026.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

DEADLINE

CIRCUIT CARD ASSEMBLY

Solicitation # SPE7M1-27-T-2609

Solicitation SPE7M1-27-T-2609 is a fixed-price, small business set-aside contract for the procurement of one Circuit Card Assembly (NSN 5998016199553), identified as a Commercial Off The Shelf (COTS) item from Zetron Inc (P/N 950-9692). The contract is managed by the DLA Weapons Support Maritime Supply Chain, with delivery required within 20 days to the Commander USCG Sector San Francisco. The procurement is subject to strict technical and quality requirements, including a prohibition on the intentional addition of mercury and a requirement for CMMC Level 2 Self-Assessment. Packaging and marking are critical components of this contract, requiring compliance with MIL-STD-129 and MIL-STD-2073-1E. Because the item is an ESD-sensitive electronic device, it must utilize DOD-qualified protective packaging per MIL-PRF-81705, including specific barrier materials and cushioning to prevent lead damage. Inspection and acceptance will occur at the destination. Administrative requirements include the use of the Wide Area WorkFlow (WAWF) system for invoicing and adherence to the Buy American and Balance of Payments Program for quotes exceeding the micro-purchase threshold.

Bare Printed Circuit Board Manufacturing

POSTED

DEADLINE

RING, RETAINING

Solicitation # SPE7M1-27-Q-0189

Solicitation SPE7M1-27-Q-0189 is a firm fixed price request for quotations issued by the DLA Weapons Support Maritime Supply Chain for the procurement of seven retaining rings (NSN 5325-01-501-9431, P/N 2144-0114). This effort is designated as a small business set-aside and requires delivery within 60 days after order. The place of performance is Hill Air Force Base, Utah, with both inspection and acceptance occurring at the destination. The contract mandates strict adherence to technical and quality requirements found in the DLA Master List and requires packaging and labeling in accordance with ASTM D3951, MIL-STD-129, and RP001. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and payment. Quoters must provide a valid CAGE code and ensure quotations remain valid for 90 days from the deadline of November 20, 2026. Key regulatory clauses include the Buy American and Balance of Payments Program and specific employment reports on veterans.

Other Fabricated Wire Product Manufacturing

POSTED

DEADLINE

Solenoid Valve SupplyThis subcontract, managed by the DLA Weapons Support Maritime Supply Chain under the Department of Defense, requires the manufacture or sourcing of 15 solenoid valve units identified by NSN 4810010961055. The selected provider will supply these components to prime contractors fulfilling DLA supply contracts, with performance taking place in Corpus Christi, Texas. The contractor is responsible for delivering the hardware along with essential technical and safety documentation. This includes submitting Source Approval Request documentation per RC001 and providing Safety Data Sheets that comply with Federal Standard No. 313 and 29 CFR 1910.1200(g). The opportunity was posted on November 11, 2026, with a response deadline of November 23, 2026.

Industrial Valve Manufacturing

POSTED

DEADLINE

Valve Body Component SupplierThis subcontract involves the supply of five valve bodies for prime contractors supporting the DLA Weapons Support Maritime Supply Chain. The supplier is responsible for manufacturing or sourcing these components in strict accordance with DLA technical specifications. All items must be packaged according to ASTM D3951 and marked and labeled per MIL-STD-129, ensuring full compliance with the DLA Master List of Technical and Quality Requirements. The contract is managed under the Department of Defense with performance taking place in Fort Stewart. Delivery of the components is required on an FOB Origin basis. Interested parties should note the response deadline of November 23, 2026, for this procurement effort categorized under NAICS code 334418.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

DEADLINE

Special Purpose Electrical Cable SupplierThis subcontract, issued by the Department of Defense under the DLA Weapons Support Maritime Supply Chain, requires the manufacture and supply of 4,000 feet of special purpose electrical cable, identified by NSN 6145-01-545-0345. The cable must be provided in 500-foot spools as continuous lengths and must adhere to MIL-STD-12000 and RP001 DLA packaging requirements. The performance of this contract will take place in Cherry Point, North Carolina. Interested parties must respond by November 23, 2026, regarding this requirement categorized under NAICS code 335999.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

DEADLINE

Electrical Coil SupplyThis subcontract involves the manufacture or sourcing of one electrical coil, identified by NSN 5950010531517, to support prime contractors working on DLA Weapons Support Maritime Supply Chain projects for the Department of Defense. The selected provider is responsible for ensuring all components are packaged according to MIL-STD-2073-1E and marked in accordance with MIL-STD-129. The contract requires the completed, marked, and packaged coil to be delivered within 20 days of the order. Performance for this requirement will take place in Kings Bay, Georgia, under NAICS code 335311.

Power, Distribution, and Specialty Transformer Manufacturing

POSTED

DEADLINE

Manufacturer of FAA-Certified Slip Joint NutsThis subcontract involves the manufacture of 69 FAA-certified slip joint nuts for prime contractors supporting the DLA Weapons Support Maritime Supply Chain. The selected manufacturer is responsible for fabricating NSN 4730017306787 to precise dimensions and tolerances using molding or precision machining. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 332710. Strict quality and compliance standards are required, including the implementation of ISO 9001:2015 quality systems and zero-based sampling according to QAP 13873. The contractor must ensure full DLA Directive C03 traceability and provide all necessary FAA certification paperwork upon delivery of the components.

POSTED

DEADLINE

Power Distribution Panel SupplyThis subcontract involves the supply of a specialized power distribution panel for prime contractors supporting DLA supply contracts. The required equipment must match NSN 6110016639067 and correspond to specific Plainville Electrical Products Company part numbers, including 10310C-17EA0101 REV G-ASY03655, 10310C-17EA0101-ASY03655 REV 000, or ASY03655. The delivery consists of one unit that must strictly adhere to DLA technical data and DFARS 252.239-7098 restrictions. Managed by the Department of Defense under the DLA Weapons Support Maritime Supply Chain, the contract requires compliance with MIL-STD-129 packaging and RP001 palletization standards. The place of performance is designated as FPO 96692. Interested parties must respond by November 23, 2026, regarding this procurement categorized under NAICS code 335312.

Motor and Generator Manufacturing

POSTED

DEADLINE

Special Purpose Power Cable SupplierThis subcontract, issued by the DLA Weapons Support Maritime Supply Chain under the Department of Defense, seeks a supplier to provide 8,500 feet of specialized electrical power cabling. The required materials must meet Critical Application Item standards and specifically adhere to Part Piece Number M27500B20WR3U00. The supplier is responsible for either manufacturing or distributing the cable and must ensure full compliance with DFARS and FAR provisions concerning covered defense telecommunications equipment. The performance of this contract will take place at Robins Air Force Base. Interested parties must respond by November 23, 2026, regarding this requirement categorized under NAICS code 335999. The procurement is designed to support prime contractors who are delivering essential supplies to the Defense Logistics Agency.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Get full access

Join 750+ contractors already using CLEATUS