Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

This Government Contract opportunity from Department Of Defense was posted on August 4, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Executive Desk Supply and Installation

Closed
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 238290
New
Centennial JCC Panic Hardware Services (Electrical Room Egress Doors)
Solicitation # Panic Hardware (Electrical Room Egress Doors)
Management & Training Corporation is soliciting bids for the installation of commercial-grade panic hardware on electrical room egress doors at the Centennial Job Corps Center in Nampa, Idaho. The project encompasses five specific locations: the Cafeteria, Men's Dorm, Women's Dorm, Recreation area, and Vocational building. The selected contractor must conduct a site survey to verify door dimensions and fire ratings, supply Grade I heavy-duty panic bars with matching exterior trim and closers, and perform at least ten consecutive cycle tests to ensure fail-safe operation. All work must strictly adhere to NEC 2023 Article 110.26(C)(3), NFPA 101 Life Safety Code, and Americans with Disabilities Act standards. This is a fee-for-service subcontracting opportunity set aside for small businesses, including certified VOSB, SDVOSB, WOSB, and HUBZone entities. Bidders are required to submit a lump sum price for the entire project along with individual pricing per deficiency by December 1, 2026. Required submission documents include a completed bid sheet, a supplier self-certification packet with a W-9, three references for similar projects, and an SBA certification letter if applicable. Awardees must provide proof of insurance and comply with federal regulations, including the Davis-Bacon Act prevailing wage rates for Canyon and Gem Counties, as well as various FAR clauses regarding security, whistleblower rights, and the prohibition of certain foreign purchases.
Management & Training Corporation/Centennial Job Corps Center

POSTED

about 2 hours ago

DEADLINE

in about 1 month
NAICS: 238290
New
Federal
Z--ID- KOOSKIA NFH-OVERHEAD DOOR REPLACE
Solicitation # 140FF027Q0033
The U.S. Fish and Wildlife Service is conducting market research via a Sources Sought Synopsis for the replacement of three roll-up garage doors at the Kooskia National Fish Hatchery in Kooskia, Idaho. The project involves the demolition and disposal of existing doors and the installation of three new sectional overhead doors, including one approximately 8' 4" x 8' 7" and two approximately 10' 2" x 10' 1". Additionally, the scope requires the installation of two 120vac electric door operators and general preventative maintenance for up to ten additional roll-up garage doors. The resulting contract is intended to be a Firm-Fixed-Price award with a performance period of 60 days, specifically scheduled from November 30, 2026, through December 30, 2026. This opportunity is designated as a total Small Business Set Aside under NAICS code 238290. Interested firms must submit a response by November 6, 2026, providing their CAGE code, UEI, and evidence of capability through up to three similar projects completed within the last five years. A mandatory site visit is required for all bidders to verify measurements and existing conditions. Final acceptance of the work will be based on compliance with the Statement of Work, verified functionality of the doors and electric operators, and complete site cleanup. All responses should be submitted electronically to the Contracting Officer, Cindy Salazar.
Fws Contracting Activity

POSTED

about 20 hours ago

DEADLINE

in 10 days
NAICS: 238290
New
SLED
SMDOT Elevator Maintenance
Solicitation # 12701633
The City of Santa Monica, through the D600 Department of Transportation (SaMoDOT), is soliciting proposals for turnkey maintenance, inspection, and repair services for three hydraulic elevators located at 1620 6th Street. The equipment includes one Independent model AAK137, one Montgomery model AA2986, and one Otis model AEP227. The selected contractor must provide monthly systemic maintenance, a dedicated maintenance supervisor for safety surveys, and 24/7 emergency callback services with a one-hour response time. All parts must be new, conform to Original Equipment Manufacturer standards, and be stocked in a local warehouse. The award will be granted to the best bidder based on a variety of factors, including the technical experience of key personnel, financial resources, and the ability to provide future service, rather than solely on the lowest price. Bidders must comply with Title II of the ADA, the Living Wage Ordinance, and Labor Code Section 1773.2 regarding prevailing wages. A payment bond is required for awards exceeding 25,000 dollars, and the City requires a certificate of insurance naming them as an additional insured. Proposals must be submitted electronically via the OpenGov portal by November 9, 2026, at 3:00pm. The contract includes a ten-day written notice period for termination without cause and requires notification of force majeure events within 24 hours.
D600 DEPT OF TRANSPORTATION - SaMoDOT

POSTED

1 day ago

DEADLINE

in 13 days
NAICS: 238290
New
SLED
RFP 902787 Elevator Condition Assessment & Modernization Plan
Solicitation # 902787
The Alameda County General Services Agency Building Maintenance Department is soliciting proposals for a turnkey professional services contract to perform comprehensive condition assessments and develop modernization plans for elevator equipment at three Oakland, California locations: 1106 Madison Street, 1111 Jackson Street, and 1401 Lakeside Drive. The project encompasses a total of nine elevators, including Otis hydroelectric and overhead traction models, as well as US Elevator overhead traction units. The scope of work is divided into six phases, beginning with baseline scheduling and condition assessment reports, moving through the preparation of bid-ready modernization specifications and procurement support, and concluding with construction oversight and warranty period inspections. Qualified consulting firms must demonstrate at least five years of relevant experience, and staff performing the work must hold a current National Association of Elevator Safety Authorities International Qualified Elevator Inspector certification. As a public works project, all contractors must be registered with the California Department of Industrial Relations and adhere to prevailing wage and apprenticeship requirements. Proposals will be evaluated based on a maximum of 550 points, with a heavy emphasis on the description of proposed services and relevant experience over cost. Preference may be given to certified Small and Local Emerging Businesses. The awarded contractor will be ineligible to bid on any subsequent solicitations resulting from this assessment.
General Services Agency-Procurement

POSTED

1 day ago

DEADLINE

in 21 days

AI Contract Overview

Show more

The contract entails the supply and installation of two executive desks featuring a metal base, laminate top, and a 'Drift' finish, with full delivery, setup, and final acceptance included. The work is classified as a subcontract under the 8(a) Sole Source program, designated as a small business set-aside pursuant to FAR 19.8, ensuring exclusive award to an eligible 8(a) concern. The North American Industry Classification System code 238290 identifies the scope as related to other building equipment contractors, aligning with installation services rather than manufacturing. Performance is required at Wright Patterson AFB, under the jurisdiction of the Department of the Air Force, part of the Department of Defense. The opportunity was posted on August 4, 2026, with responses due by 6:00 PM on August 10, 2026, and is accessible via the SAM.gov portal for potential offerors.

General Info

Supply and install two executive desks at Wright-Patterson AFB under 8(a) sole source program.

NAICS

238290 - Other Building Equipment Contractors

Place of Performance

Wright Patterson AFB, OH, USA

Set-Aside

8A

Documents

This scope was carved out of FA860126Q0107.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Intent to Sole Source Office Furniture

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed
Posted

subcontract

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Department Of The Air Force
ContactsNo contacts available
OfficeN/A
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Supply and installation of 2 executive desks with metal base, laminate top, and 'Drift' finish. Includes delivery, setup, and final acceptance.

More opportunities from Department Of Defense → Department Of The Air Force

Same awarding agency

NAICS: 541715
Federal
Notice of Intent to Sole Source - Post-delivery support of developed space and ground hardware and software
Solicitation # FA254826RB008
The Space Rapid Capabilities Office (Space RCO) intends to award a sole-source contract to Systems & Technology Research, LLC for post-delivery support of developed space and ground hardware and software. This effort focuses on providing systems engineering support for the verification, validation, and on-orbit troubleshooting of payloads, as well as transitioning a prototype ground system to full operational capability (FOC) within six months of the award to proceed. Key technical requirements include the development of a new graphical user interface, integration of mission-unique software, enhanced telemetry processing for 24/7 operations, and direct integration with the R2C2 Acme Ground Segment using cloud infrastructure and cybersecurity best practices. The contract is structured with multiple CLINs utilizing Cost Plus Fixed Fee (CPFF), Time and Materials (T&M), and Cost Only (No Fee) pricing models. The period of performance includes a mix of one and two-year base periods with multiple one-year option extensions. While the government intends to proceed with a sole-source award under 10 U.S.C. 3204(a)(1) due to the contractor's role as the original developer, other responsible sources may submit capability statements by November 4, 2026. To be considered viable, any alternative response must explicitly prove the ability to achieve FOC within six months and demonstrate integration with the R2C2 Acme Ground Segment without relying on proprietary data.
Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

8 days ago

DEADLINE

in 8 days
View Details
NAICS: 541715
SBIR / STTR
Agile Wire Harness Manipulation and Installation for Unmanned Aerial Systems
Solicitation # DAF27BZ01-DV011
Solicitation DAF27BZ01-DV011 is a Direct-to-Phase-II SBIR award issued by the Department of the Air Force to develop an agile, modular robotic manufacturing workcell for the autonomous manipulation and installation of flexible wire harnesses in Unmanned Aerial Systems and advanced munitions. The project aims to eliminate manual assembly bottlenecks by transitioning a TRL 4 proof-of-concept into an operationally viable system capable of handling deformable materials with sub-millimeter precision of 0.5 mm or less. Key performance goals include achieving a two-to-four-times improvement in cycle time, reducing skilled labor hours by at least 50 percent, and enabling shop-floor operators to retask the workcell for new harness families within a single eight-hour shift. The final delivery must include a fully functional single-arm robotic cell with a multi-modal sensor stack, an autonomous software stack, a comprehensive technical data package, and a machine-readable digital thread for quality traceability. This total small business set-aside has a maximum period of performance of 24 months and is evaluated based on technical merit, investigator qualifications, and commercial potential. Awarded contracts will likely be firm-fixed-price and require strict adherence to cybersecurity standards, including CMMC requirements for safeguarding covered defense information. Proposers must submit a seven-volume proposal via the DSIP portal, including detailed technical and cost volumes, and must disclose any organizational conflicts of interest or foreign affiliations. The effort aligns with the Air Force Materiel Command Digital Transformation Mandate and Operational Imperative 4 to achieve affordable mass through sensor-driven automation and deterministic offline path planning.
Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

21 days ago

DEADLINE

in 28 days
View Details
NAICS: 541512
SBIR / STTR
Technical Data Package Modernization for Information Assurance and Secure Data Exchange
Solicitation # DAF27BZ01-DV008
Solicitation DAF27BZ01-DV008 is a Directed to Phase II SBIR effort issued by the Department of the Air Force to modernize Technical Data Packages (TDPs) for complex Air and Space Force platforms. The project addresses critical gaps in Information Assurance and secure data exchange, specifically targeting the need for robust configuration control and protection against cyber threats in Model-Based Definition and digital twin environments. The objective is to advance the technology from TRL 4 to at least TRL 6 by developing a functional prototype that aligns with DoD Zero Trust Architecture and Trusted AI and Autonomy priorities. Key technical requirements include the creation of a secure web-based MBD visualization tool, an encrypted configuration management system for as-sustained asset states, automated IA compliance validation tools, and an end-to-end encrypted data exchange framework incorporating AI/ML for damage detection and sustainment planning. This total small business set-aside has a maximum award value of 2,000,000 dollars and a maximum performance period of 24 months. Proposals are evaluated based on technical merit and innovation, qualifications of key personnel, and commercial potential, with a strict requirement for Phase I equivalency documentation to avoid disqualification. Awarded contracts will likely be Firm-Fixed-Price and require compliance with CMMC Level 2 (Self) for safeguarding Federal Contract Information and Controlled Unclassified Information. Deliverables include the functional prototype, comprehensive technical documentation, and a transition plan for operational integration into Air and Space Force platforms. Proposals must be submitted via the DSIP portal as a single PDF and must include disclosures regarding organizational conflicts of interest and the involvement of foreign citizens.
Computer Systems Design Services

POSTED

21 days ago

DEADLINE

in 28 days
View Details
NAICS: 541715
SBIR / STTR
Optimally Packaged Assembly for Laser Systems (OPALS)
Solicitation # DAF27BZ01-NV002
The Optimally Packaged Assembly for Laser Systems (OPALS) solicitation, number DAF27BZ01-NV002, is a Small Business Concern set-aside issued by the United States Air Force. The objective is to develop and demonstrate a ruggedized, environmentally stable, and compactly packaged internal optical beam control system for airborne high-energy laser applications. Rather than designing new outer moldlines, the effort focuses on optimizing internal packaging to replace conventional flat optical benches, ensuring the system remains stable against shock, vibration, thermal gradients, and pressure variations. Key technical priorities include the use of advanced materials free of shedding contaminants, athermalized design strategies, and the implementation of additive manufacturing or precision micro-assembly to enhance alignment and component replacement through line replaceable units. This Phase I effort has a maximum duration of six months with a budget of 300,000 dollars, primarily awarded as a Firm-Fixed-Price contract. Proposals are evaluated based on technical merit, the qualifications of key personnel, and commercial potential. Applicants must be registered in the System for Award Management and provide seven distinct proposal volumes via the DSIP portal, including technical, cost, and commercialization reports. Due to the nature of the technology, the contract incorporates strict requirements for safeguarding covered defense information, export control compliance via DD Form 2345, and cybersecurity affirmations according to NIST standards. Award selections are based on the overall technical value and cost to determine the most advantageous proposal for the government.
Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

21 days ago

DEADLINE

in 28 days
View Details
NAICS: 541715
SBIR / STTR
Agile Autonomous Technical Data Package to Path Robotic Task Specification
Solicitation # DAF27BZ01-DV012
Solicitation DAF27BZ01-DV012 is a Direct-to-Phase II SBIR effort issued by the United States Air Force to develop an automated, end-to-end software platform for robotic task specification. The objective is to create a system capable of ingesting heterogeneous Technical Data Packages, including 3D CAD models, 2D drawings, and Bills of Materials, to autonomously extract engineering intent and generate collision-free robotic inspection trajectories. By converting complex geometric constraints and tolerances into executable commands for mobile robotic manipulators, the project aims to reduce quality control programming timelines from several days to under two hours, ultimately reaching a Technology Readiness Level of 6 or 7. This total small business set-aside has a maximum period of performance of 24 months and a potential value of 2,000,000 dollars. Proposals are evaluated based on technical merit, innovation, investigator qualifications, and commercial potential, with a strict requirement for Phase I equivalency documentation to avoid disqualification. Awardees must comply with rigorous federal standards, including CMMC cybersecurity requirements, ITAR/EAR export controls, and DFARS item identification for hardware. Submissions must be filed electronically via the DSIP portal, adhering to a 35-page limit for the technical volume.
Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

21 days ago

DEADLINE

in 28 days
View Details
NAICS: 541715
SBIR / STTR
High Speed, Low Temperature Hyperspectral Imager for High Enthalpy Ground Testing
Solicitation # DAF27BZ06-NV006
The United States Air Force is soliciting proposals under solicitation DAF27BZ06-NV006 for the development of a High Speed, Low Temperature Hyperspectral Imager for High Enthalpy Ground Testing. The objective is to provide the Arnold Engineering Development Complex with a method to resolve surface temperature and emissivity across test articles. The project is structured in two phases: Phase I focuses on feasibility research and a benchtop proof-of-concept, while Phase II involves the fabrication of an operationally viable prototype. Technical threshold requirements include measuring surface temperatures from 0 to 1500 degrees Fahrenheit at 4000 Hz with a maximum pixel footprint of 0.1 inch and an accuracy of +/- 10 degrees Fahrenheit, with higher objective targets specified for each metric. This is a Small Business Innovation Research set-aside with a Phase I award maximum value of 300,000 dollars, typically awarded as a Firm-Fixed-Price contract. Proposals will be evaluated based on technical merit, qualifications of key personnel, and commercial potential. Eligible applicants must be registered in the System for Award Management and certify their status as a Small Business Concern. Submissions must be uploaded via the DSIP portal and include seven distinct volumes covering technical, cost, commercialization, and disclosure data. Award selections are based on the overall technical value and cost to determine the most advantageous proposal for the government.
Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

21 days ago

DEADLINE

in 28 days
View Details
NAICS: 541715
SBIR / STTR
Fusion of Cooperative Information Sharing for Uncrewed Air Systems (FOCISAUS)
Solicitation # DAF27TZ01-DV003
The Fusion of Cooperative Information Sharing for Uncrewed Air Systems (FOCISAUS) solicitation, number DAF27TZ01-DV003, is a total small business set-aside issued by the United States Air Force. The program seeks prototype-ready solutions to enable cooperative perception among distributed uncrewed air and ground sensing nodes. The primary objective is to develop a scalable system capable of selectively transmitting, compressing, and fusing sensor-derived information to reduce blind spots and improve situational awareness for autonomy software or human operators. Key technical requirements include the implementation of adaptive data transmission policies, real-time data fusion—such as point cloud or radar correlation—and the ability to maintain functionality under degraded or intermittent communication links. The award has a maximum value of 2,000,000 dollars and is structured as a Direct to Phase II effort. Proposals will be evaluated based on technical approach, qualifications of key personnel, and commercial potential. Successful offerors must deliver a functioning reporting prototype, fusion-enabled outputs for edge applications, and detailed performance results regarding latency and bandwidth efficiency. Administratively, the contract requires registration in the System for Award Management and compliance with projected CMMC Level 2 cybersecurity standards. Proposals must be submitted via the DSIP portal by October 28, 2026, and must include technical, cost, and commercialization volumes, along with required feasibility documentation.
Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

21 days ago

DEADLINE

in 28 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS