Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Exhaust System Installation and HVAC Integration Contractor

Active

International

Response Deadline09/18/2026, 04:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the installation of exhaust systems for prime contractors at Department of National Defence facilities located at CFB Valcartier in Québec. The scope of work specifically focuses on Building 6, where the contractor will install new reels and hoses and connect fume extractors to the existing building ventilation system. The objective is to deliver a fully operational and integrated extraction system. The contractor is responsible for conducting all necessary testing and inspections to ensure airflow and safety compliance with both general building codes and specific DND requirements. This opportunity was posted on September 2, 2026, with a response deadline of September 18, 2026, under NAICS code 238220.

General Info

Install exhaust systems and fume extractors at CFB Valcartier Building 6 for DND.

Agency

Government of Canada → Department of National DefenceView Agency

NAICS

238220 - Plumbing, Heating, and Air-Conditioning ContractorsView NAICS

Place of Performance

Québec, CAN

Set-Aside

NONE

Documents

This scope was carved out of W0106-26E010/A.

The full solicitation package (6 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Procurement of a Gas Exhaust System

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedSep 2

subcontract

Response DeadlineSep 18

Submission deadline

Response Deadline

09/18/2026, 04:00:00 PM UTCin 12 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyGovernment of Canada → Department of National Defence

ContactsNo contacts available

OfficeN/A

Organization / Agency

Government of Canada → Department of National Defence

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs installation of exhaust systems for prime contractors on Department of National Defence (DND) facility projects at CFB Valcartier. Installs new reels and hoses and connects fume extractors to the existing building ventilation system in Building 6. Conducts testing and inspections for airflow and safety compliance with building codes and DND requirements. Delivers a fully operational, integrated extraction system.

Similar Contracts

Same NAICS industry code

Aviation Fueling SystemsThis subcontract opportunity with Hensel Phelps involves the installation of specialized aviation fueling infrastructure at the Seattle-Tacoma International Airport. The selected contractor will be responsible for delivering a fully operational fueling system, which includes the installation of fuel tanks, piping, pumps, and fueling stations. The project is designated as an 8A set-aside for Small Disadvantaged Businesses under NAICS code 238220. Interested parties must submit their responses by September 15, 2026, following the posting date of September 5, 2026.

POSTED

about 14 hours ago

DEADLINE

Fire Suppression SystemsThis subcontract opportunity with Hensel Phelps involves the installation of fire suppression and protection systems for projects at the Seattle-Tacoma International Airport. The selected contractor will be responsible for installing sprinklers, piping, and fire suppression hardware to deliver a fully operational system. The project is designated as an 8A set-aside for Small Disadvantaged Businesses under NAICS code 238220. Interested parties must submit their responses by the deadline of September 15, 2026.

POSTED

about 14 hours ago

DEADLINE

Process Equipment & MechanicalThis subcontract opportunity with Filanc involves the supply and installation of mechanical equipment for lift stations on municipal projects for the City of Oceanside. The scope of work includes the installation of hoists, piping, valves, and pipe supports to deliver a fully operational mechanical lift system. The project is designated as a small business set-aside, open to various certifications including SDB, WOSB, HUBZone, VOSB, and SDVOSB. Interested parties must respond by September 16, 2026, under NAICS code 238220.

POSTED

about 14 hours ago

DEADLINE

Chiller Replacement & InstallationThis subcontract opportunity with Serrato Corporation DBA North Texas Job Corps involves the demolition and installation of a new air-cooled chiller system. The selected contractor will be responsible for removing the existing chiller, installing a new unit according to manufacturer specifications, insulating all associated piping, and completing the final system startup and testing to ensure a fully operational delivery. The project is designated as an SBA set-aside for various small business categories, including SDB, WOSB, HUBZone, and Veteran-owned businesses. Compliance requirements include the submission of Davis-Bacon Act certified payroll and the maintenance of standard liability insurance. Responses are due by September 18, 2026.

Serrato Corporation DBA North Texas Job Corps

POSTED

about 14 hours ago

DEADLINE

Utility Installation & Cathodic ProtectionThis subcontract for the Pier B On-Dock Rail Support Facility project involves the installation of utility piping systems and corrosion protection for prime contractors serving FHWA and MARAD. The scope of work includes the deployment of various piping and cathodic protection systems utilizing directional drilling to ensure a fully functional utility network. The opportunity is managed by Kiewit Infrastructure West Co. under NAICS code 238220. It is designated as a set-aside for various small business categories, including Small Disadvantaged, Women-Owned, HUBZone, and Veteran-Owned small businesses. The response deadline for this requirement is September 15, 2026.

Kiewit Infrastructure West Co.

POSTED

about 14 hours ago

DEADLINE

CBP5933 Bldg. 225 HVAC Replacement

Solicitation # CBP5933

Management & Training Corporation is seeking bids for a fixed-price, single lump sum subcontract to replace six split-system heat pump HVAC systems at the San Diego Job Corps Center in Imperial Beach, California. The project involves installing three 2-ton and three 1.5-ton Payne heat pump systems, including matching indoor air handlers, and requires the removal and disposal of old equipment. The estimated contract value ranges from 25,000 to 100,000 dollars, with a performance period of 30 consecutive business days following the written Notice to Proceed. Bids are due by September 11, 2026, and will be evaluated based on overall best value, considering price, quality, and delivery schedule. Eligible bidders include various small business categories, such as SDB, WOSB, HUBZone, and VOSB. Required submission documents include the MTC Bid for Lump Sum Contract form, a detailed cost breakout on company letterhead, and a bid bond guarantee of at least 20 percent for bids equal to or exceeding 25,000 dollars. The contract is subject to the Davis-Bacon Act, requiring compliance with prevailing wage rates and federal energy efficiency standards. Additionally, awarded contractors must provide performance and payment bonds, maintain a Unique Entity ID, and adhere to FAR regulations regarding the Buy American Act and combating trafficking in persons. Final payment is contingent upon a successful final inspection and the submission of closeout documents, including certified payroll reports and operation and maintenance manuals.

San Diego Job Corps Center

POSTED

about 14 hours ago

DEADLINE

RFQ7593 Smoke Detector Installation

Solicitation # RFQ7593

Management & Training Corporation (MTC) is seeking bids for a subcontracting opportunity to provide fire system services, specifically smoke detector installation, at the Sierra Nevada Job Corps Center in Reno, Nevada. This solicitation, identified as RFQ7593, is open to various small business categories, including Small Disadvantaged, Women-Owned, Veteran-Owned, Service-Disabled Veteran-Owned, and HUBZone certified businesses under NAICS code 238220. Bids must be submitted by September 18, 2026, and include a bid sheet, completed supplier self-certification and IRS W-9 packets, and proof of insurance. A required pre-bid meeting is scheduled for September 11, 2026. The contract requires strict adherence to federal regulations and labor standards, including the Service Contract Act and Wage Determination No. 2015-5595 Revision 28 for Washoe and Storey counties. Selected contractors must comply with numerous FAR clauses covering security requirements, the prohibition of certain telecommunications equipment, and anti-trafficking regulations. First-tier subcontractors with awards exceeding 30,000 dollars must disclose any debarment or suspension status. Payment is processed upon the submission of invoices for accepted materials or services, and all work is subject to inspection by MTC or the government to ensure it is free from defects and fit for its intended purpose.

Sierra Nevada Job Corps Center

POSTED

about 14 hours ago

DEADLINE

2026-Clearfield-Bldg E8 Welding HVAC

Solicitation # 2026- Clearfield- Welding Bldg. E8 HVAC Replacement

Management and Training Corporation is seeking fixed-price lump sum bids for a subcontracting opportunity to perform HVAC replacement services at the Building E8 Welding facility located at the Clearfield Job Corps Center in Clearfield, Utah. This solicitation, identified as 2026-clearfield-bldg-e8-welding-hvac, is open to various small business categories, including Small Disadvantaged Businesses, Women-Owned Small Businesses, HUBZone, and Veteran-Owned Small Businesses, under NAICS code 238220. The response deadline for this opportunity is September 19, 2026. The project requires adherence to the provided scope of work and compliance with Davis-Bacon prevailing wage rates as specified in General Decision Number UT20250083 for Davis County. Bidders must submit their proposals via email and are required to provide a bid breakout, insurance documentation, and professional references. Additionally, the contract necessitates the submission of a bid bond and subsequent performance and payment bonds. Interested suppliers must complete the MTC Supplier Self-Certification and Set-Up Form along with a current IRS Form W-9 to facilitate the onboarding process.

Management & Training Corporation

POSTED

about 14 hours ago

DEADLINE

Joliet JCC Sewer Vent Repairs

Solicitation # Joliet JCC Sewer Vent Pipe Repair

This is a subcontracting opportunity with Management and Training Corporation for sewer vent pipe repairs at the Joliet Job Corps center located at 1101 Mills Road in Joliet, Illinois. The project falls under NAICS code 238220 and is open to various small business set-asides, including Small Disadvantaged, Women-Owned, HUBZone, and Veteran-Owned small businesses. Interested parties must submit their quotations by September 11, 2026, at 3:00 PM CT. The contract requires adherence to the Service Contract Labor Standards and the specific wage rates and fringe benefits outlined in Department of Labor Wage Determination 2015-5019 Revision 31 for Grundy, Kendall, and Will counties. Selected contractors must comply with insurance requirements, indemnification clauses, and FFATA reporting regulations. The primary point of contact for this solicitation is Fran McGraw.

MTC Joliet Job Corps

POSTED

about 14 hours ago

DEADLINE

RFQ#3191 Laundry Tray Installations

Solicitation # RFQ#3191

Management & Training Corporation (MTC) is soliciting bids under RFQ 3191 for a subcontracting opportunity to provide plumbing services at the Charleston Job Corps Center in Charleston, West Virginia. The scope of work requires the contractor to provide all labor, materials, and supervision to remove existing units and install new laundry trays and faucet sets in the Education and CTT restroom areas. The project involves installing fixtures on Everform Graphite Terrazzo Matrix countertops, reconnecting hot and cold water supply lines and drainage systems, and ensuring all connections are watertight. The contractor is responsible for testing all fixtures for flow and leaks and removing all debris from the work area upon completion. Bids must be submitted by September 11, 2026, at 3:00 PM EST. Required submission documents include a lump sum bid sheet, proof of insurance, three references for similar projects, and a completed supplier packet containing a W-9 and self-certification form. This opportunity is open to various small business categories, including SDB, WOSB, HUBZone, and SDVOSB, under NAICS code 238220. The award will be based on the best value as determined by MTC. The contract is subject to several federal regulations, including Service Contract Labor Standards wage determination WD 2015-4347 and the Contract Work Hours and Safety Standards Act. Subcontractors must provide a Unique Entity Identification number and adhere to FAR 52.204-10 reporting requirements for projects valued at 40,000 dollars or more. Additionally, the contractor must comply with strict information security and confidentiality guidelines regarding government and Department of Labor data.

Management & Training Corporation

POSTED

about 14 hours ago

DEADLINE

Replace Shower Diverters in two (2) Dorms

Solicitation # replace-shower-diverters-two-2-dorms

This contract involves the removal and replacement of shower diverters in eight bathrooms across two dorm buildings in Indiana. The scope of work includes replacing existing Powers brand diverters with Delta or comparable models featuring readily available parts, as well as repairing or replacing any piping in poor condition leading into the diverters. The project is open to various small business set-asides, including SDB, WOSB, HUBZone, and veteran-owned businesses. A site visit is scheduled for September 1, 2026, at 10:30 AM, and all proposals must be submitted to Tammy Swallows via email by September 14, 2026, at 3:00 PM.

Adams & Associates

POSTED

about 14 hours ago

DEADLINE

This is a subcontracting opportunity to replace a chiller in McKinney, TX.

Solicitation # subcontracting-opportunity-replace-chiller-mckinney-tx

Serrato Corporation is seeking subcontractors for a project to replace a failing air-cooled chiller in Building 214/215 at the North Texas Job Corps Center located in McKinney, Texas. The scope of work includes the demolition and disposal of the existing chiller, installation and startup of a new air-cooled chiller, and the integration of building automation controls featuring a JACE 9000 central integration point with a graphical user interface. Additionally, the contractor is responsible for cleaning and inspecting air handling units, replacing three of four air handler VFDs, and installing control valves for four AHUs. Bids must be submitted by September 18, 2026, and quotes must remain valid for 90 days. Required submission documentation includes manufacturer equipment specifications, warranty information, and a Certificate of Liability Insurance naming Serrato Corporation as the holder. Insurance minimums include 1 million dollars for Commercial General Liability and Comprehensive Automobile Liability per occurrence, and 500 thousand dollars for Employers Liability. For work exceeding 2,000 dollars, subcontractors must provide Form 1413 to acknowledge compliance with Davis-Bacon Act certified payroll requirements. This opportunity is set aside for various small business categories, including SDB, WOSB, HUBZone, VOSB, and SDVOSB.

Serrato Corporation DBA North Texas Job Corps

POSTED

about 14 hours ago

DEADLINE

More opportunities from Government of Canada → Department of National Defence

Same awarding agency

Installation of Vertical Milling Machines

All Other Specialty Trade Contractors

POSTED

DEADLINE

Supply of First LC-205VSD Vertical Milling Machines

Machine Tool (Metal Cutting Types) Manufacturing

POSTED

DEADLINE

Supply of Insulated Electrical Lead Wires (AWG22)

Residential Electric Lighting Fixture Manufacturing

POSTED

DEADLINE

Supply of Extruded Aluminum Cup Bodies

Aluminum Extruded Product Manufacturing

POSTED

DEADLINE

Manufacturing of Practice Inert Electric M6 Blasting Caps

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

Practice Inert Electric M6 Blasting Cap

Solicitation # W8703-270039/A

The Department of National Defence for the Government of Canada is soliciting offers for the procurement of 10,000 Practice Inert Electric M6 Blasting Caps under solicitation number W8703-270039/A. These items are designed to replicate the size, shape, and handling characteristics of real detonators without containing explosive components, allowing soldiers to develop training techniques and confidence safely. The requirement is split into two delivery locations: 3,500 units to CFAD Dundurn, Saskatchewan, and 6,500 units to CFAD Angus, Ontario, with all deliveries due on or before November 15, 2027. The goods must be manufactured in accordance with MIL-PRF-32293 (AR) and MIL-C-46915 (MU) standards, featuring an extruded aluminum cup body and AWG22 brown insulated lead wires. The contract will be awarded to the compliant offer with the lowest evaluated price, with evaluations conducted in Canadian dollars on a Delivery Duty Paid (DDP) basis. Bidders must meet mandatory technical criteria and certify that the products are asbestos-free and contain no ferric iron dioxide. The procurement is subject to the Controlled Goods Program and requires compliance with ISO 9001:2015 quality management standards. Packaging must adhere to specific bundling and labeling requirements, including compliance with the Transportation of Dangerous Goods Act and the Hazardous Products Act. Proposals must be submitted via email to the contracting authority by September 3, 2026, at 14:00 Eastern Time, divided into technical, financial, and declaration sections.

Ammunition (except Small Arms) Manufacturing

POSTED

DEADLINE

2027 Military Careers Fair

Solicitation # W0202-27-008-A

The Department of National Defence is soliciting bids under solicitation number W0202-27-008-A to provide specialized exhibition services for the 2027 Military Careers Fair in Quebec City. The contract involves the planning, setup, and support of an indoor event scheduled for March 26 and 27, 2027, with setup occurring on March 25 and teardown beginning after public closure on March 27. The required venue must offer between 45,000 and 50,000 square feet of exhibition space. Key deliverables include hall rentals, immersive LED arches, audiovisual services, a minimum of 50 staff parking spaces, and 24/7 building security. Logistics requirements include the provision of at least one forklift with an operator during setup and teardown. The contract will be awarded to the compliant offer with the lowest evaluated price, provided it meets all mandatory technical criteria. Bidders must submit their proposals in Canadian dollars and include the required Offer Submission and Offeror Declaration forms. All services, technical documentation, and coordination must be available in French, and all equipment must comply with provincial and municipal codes as well as venue accessibility standards. The contractor is responsible for maintaining valid insurance for the building and visitors and must adhere to strict legal standards regarding the prohibition of forced labour and human trafficking. Proposals are due by September 18, 2026, and should be submitted via email to the National Defense Bid Receiving Unit.

Convention and Trade Show Organizers

POSTED

DEADLINE

Multiple Victoria-Class Spares : SCREW, MACHINE, BALL, JACK,SCREW,HAND, SCREW,CAP, SOCKET HEAD and WATER TESTING KIT,CHEMICAL AGENTS

Solicitation # W8482-275379/A

The Department of National Defence is soliciting bids for various Victoria-Class spares to be delivered to CFB Esquimalt and CFB Halifax. The required items include machine screws, balls, a hand screw jack, socket head cap screws, and chemical agent water testing kits. Quantities vary by item and destination, with specific part numbers and NCAGE codes provided for each requirement. This procurement is subject to the Controlled Goods Program under the Defence Production Act and Canada's Export Control List. Bidders offering equivalent or substitute products must provide the brand name, model or part number, and the NCAGE. The solicitation is open for responses until October 13, 2026, and documents may be submitted in either official language of Canada.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

DEADLINE

in about 1 month

ENCLOSED TRAILER FOR OVER SNOW VEHICLE

Solicitation # W8476-277194/A

The Department of National Defence is soliciting offers for the procurement of four enclosed trailers for over snow vehicles to be delivered to Canadian Forces Base North Bay, Ontario. The contract requires delivery within 120 days of the award, with shipping terms specified as Delivered Duty Paid (DDP) according to Incoterms 2020. The trailers must adhere to SAE J560 and CMVSS standards for lighting, reflectors, and brake system compatibility. Additionally, the successful contractor must provide bilingual operator, maintenance, and parts manuals and ensure all vehicles are of the same make and model with interchangeable parts. The award will be based on the lowest aggregate evaluated price among offers that meet all mandatory technical criteria. Bids must be submitted in Canadian dollars via email by September 8, 2026. The contractor is expected to follow environmentally preferable packaging guidelines and comply with the Transportation of Dangerous Goods Act and the Hazardous Products Act for any hazardous materials. Payment terms include a 30-day window for undisputed invoices, subject to a 10% holdback. Offerors must possess a Procurement Business Number and submit their proposals in four distinct sections: technical, financial, submission/declaration forms, and additional information.

Travel Trailer and Camper Manufacturing

POSTED

DEADLINE

RCEMES Milling Machines

Solicitation # W2037-26-0076/A

The Department of National Defence is soliciting bids under solicitation W2037-26-0076/A for the procurement of five First LC-205VSD Vertical Milling Machines with power feed for the Royal Canadian Electrical and Mechanical Engineers School at CFB Borden. The equipment is intended for military training in basic operations, jig boring, and reaming on materials such as steel and aluminum, with a strong emphasis on standardization with existing equipment. Mandatory technical specifications include a maximum dimension of 150 by 120 by 100 inches, a 230v three-phase power supply, and a variable speed spindle ranging from 40 to 3000 RPM. The contract includes the supply of the machines and a lot for installation and calibration, which must be completed within four weeks of delivery. The solicitation is restricted to Canadian suppliers, and the award will be based on the lowest evaluated price among compliant offers that meet all mandatory technical criteria. All deliverables must be received by March 31, 2027, delivered Free Carrier (FCA) to Building S-165 in Borden, Ontario. Bidders must submit their proposals via the SAP Business Network by September 4, 2026, divided into technical, financial, and administrative sections. The contract mandates environmentally preferable packaging and requires compliance with Canada's Code of Conduct for Procurement, anti-forced labour requirements, and international sanctions policies. Aaron Pound serves as the Contracting Authority for this requirement.

Cutting Tool and Machine Tool Accessory Manufacturing

POSTED

DEADLINE

CFSCE Utility Poles

Solicitation # W2037-27-0466/A

The Department of National Defence, specifically the Canadian Forces School of Communications and Electronics, is soliciting offers for the supply and delivery of utility poles to support Line Technician training. The requirement consists of a firm purchase of 50 utility poles annually for three years, with an option to procure an additional 50 poles per year for two years. The contract remains effective until March 31, 2029. To ensure safety and meet mandatory course requirements for student climbing training, the poles must be new and specifically finished as untreated Class 4 red pine peeled; galvanized steel poles are explicitly prohibited. Deliveries must be made Delivered Duty Paid to Kingston, Ontario, with the contractor providing a minimum of two weeks' notice and utilizing vehicles equipped with unloading devices. The first preferred delivery is October 2, 2026, with a final deadline of November 4, 2026, followed by annual deliveries in September for 2027 and 2028. Bidders must submit separate technical and financial offers, certifying compliance with Canada's Code of Conduct for Procurement and employment equity standards. Additionally, the contractor must adhere to environmentally preferable packaging specifications, ensuring materials are reusable, returnable, or recyclable.

POSTED

DEADLINE

Solicitation # W8482-275705/A

The Department of National Defence is soliciting bids for the procurement of bed mattresses under solicitation W8482-275705/A. The requirement consists of two line items: 200 units to be delivered to CFB Halifax and 100 units to be delivered to CFB Esquimalt. Bidders must provide pricing on a Delivery Duty Paid basis in Canadian dollars. The contract will be awarded based on the lowest evaluated price for compliant offers on an item-by-item basis, and multiple contracts may be awarded. Offerors proposing equivalent or substitute products must provide complete specifications and guarantee that existing third-party warranties will not be adversely affected. The procurement includes strict adherence to packaging and marking standards, with specific requirements for contractors based in the United States, European Union, or Canada, including the use of bar-coding standards and environmentally preferable packaging. The contract involves controlled goods under the Defence Production Act, requiring successful bidders to provide proof of registration or exemption within 30 days of the award. Bids must be submitted by September 17, 2026, at 14:00 EDT, including the required submission details, form, and declaration annexes in their original formats. Payment for undisputed invoices will be made within 30 days of receipt.

Mattress Manufacturing

POSTED

DEADLINE