Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Export-Controlled Technical Support

Active

Federal

Response Deadline07/24/2026, 09:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract requires on-site technical support services involving access to ITAR and EAR-controlled technical data related to the CMM system, indicating that all work must comply with strict U.S. export control regulations. The performance location is in Hampton, Virginia, with a zip code of 23681, and the work is classified as a subcontract under the NAICS code 541715, which corresponds to research and development in the physical, engineering, and life sciences. The contract was posted on July 22, 2026, with a response deadline of July 24, 2026, suggesting a short turnaround for submissions. The contracting entity is the NASA Shared Services Center, part of the National Aeronautics and Space Administration, signifying that the support services are critical to a federally funded aerospace program. Access to controlled technical data means that personnel must be cleared to handle sensitive information, and strict compliance with export control laws is mandatory throughout the duration of the engagement.

General Info

On-site technical support for NASA in Hampton, VA, handling ITAR/EAR-controlled CMM data under NAICS 541715.

Agency

National Aeronautics And Space Administration → NASA Shared Services CenterView Agency

NAICS

541715 - Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)View NAICS

Place of Performance

Hampton, VA, 23681, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 22

subcontract

Response DeadlineJul 24

Submission deadline

Response Deadline

07/24/2026, 09:00:00 PM UTCin 1 day

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyNational Aeronautics And Space Administration → NASA Shared Services Center

ContactsNo contacts available

OfficeN/A

Organization / Agency

National Aeronautics And Space Administration → NASA Shared Services Center

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

On-site technical support involving access to ITAR/EAR-controlled technical data related to the CMM system.

Similar Contracts

Same NAICS industry code

Installation and Technical Integration Support for QX700 E SystemThe contract entails the on-site or remote installation, calibration, and seamless integration of the QX700 E system with the QX200 AutoDG platform, ensuring full operational compatibility and functionality. This work includes comprehensive staff training to enable proficient use of the integrated system and performance verification to confirm that all technical specifications and operational benchmarks are met. The scope is focused on delivering end-to-end technical support to ensure the systems function as intended in real-world environments, with an emphasis on reliability and user competency. This subcontract is issued under the NAICS code 541715, categorized under research and development in the physical, engineering, and life sciences, and is managed by the National Institutes of Health via the Department of Health and Human Services. The solicitation was posted on July 22, 2026, with a response deadline of July 30, 2026, at 6:00 PM. The place of performance is not specified, allowing for either on-site or remote execution as deemed appropriate by the contractor. All deliverables must align with the technical requirements of the integrated system, and successful performance is contingent on meeting verified operational standards.

National Institutes Of Health Olao

POSTED

about 18 hours ago

DEADLINE

Long-Term Pavement Performance (LTPP) Program Engineering Services Contract (LPES)The Federal Highway Administration is seeking qualified contractors for the Long-Term Pavement Performance (LTPP) Program Engineering Services Contract to support the collection, storage, analysis, and presentation of pavement performance data, both historical and newly acquired. Contractors must provide all necessary facilities, trained personnel, and subject matter experts to execute tasks under an indefinite delivery, indefinite quantity contract structure, with task orders awarded competitively. The scope includes managing LTPP dataset development, conducting specialized data analysis, and translating research findings into practical engineering tools, guidelines, and program deliverables. Contractors may use their own equipment or procure third-party services to carry out data collection, ensuring full delivery of services and data as required. The contract is categorized under NAICS code 541715 and is not subject to any set-aside provisions. Proposals are due by August 5, 2026, with the solicitation posted on July 22, 2026. Primary responsibilities fall into three core areas: pavement performance data collection and processing, LTPP dataset development and special studies, and overall engineering support and program activities. The point of contact for inquiries is Tamiko Aikens, with Bob Brown as the secondary contact, and the contract will be managed by the Department of Transportation’s 693JJ3 Acquisition and Grants Management office located in Washington, DC. Performance locations are not fully specified but will align with national pavement research needs.

693JJ3 Acquisition And Grants Mgt

POSTED

about 18 hours ago

DEADLINE

Army Contracting Command – Red River Army Depot (ACC-RRAD) Organic Industrial Base (OIB) Modernization Commercial Solutions Opening (CSO)The U.S. Army, through the Army Contracting Command – Red River Army Depot (ACC-RRAD), is executing a Commercial Solutions Opening (CSO) under solicitation W911RQ-26-S-C001 to modernize its Organic Industrial Base (OIB) by leveraging innovative commercial technologies aligned with Convergent Manufacturing principles. This initiative focuses on enhancing agile facilities, digital enterprise integration, automation, cybersecurity, and advanced manufacturing capabilities, particularly in support of military vehicle sustainment and modernization efforts. The CSO, authorized under DFARS Subpart 212.70 and executed under FAR Part 12 Commercial Item Procedures, enables the Department of Defense to competitively acquire non-traditional and traditional commercial solutions without pre-defined contract vehicles. A series of targeted Areas of Interest (AoIs) have been issued to address specific modernization needs, including the replacement of a damaged camera monitoring system around a one-mile vehicle test track, restoration of automated media recycling in a blast booth, development of Power Pack Interface & Test Sets for military vehicle testing, certification support for AS9100 quality systems, and the design and manufacture of tracked vehicle track pins and bushings, as well as improved fixture removal methods for Bradley Fighting Vehicle hulls. Each AoI seeks technically feasible, scalable, and innovative commercial solutions that reduce reliance on single-source suppliers and enhance domestic manufacturing resilience. Proposals must be submitted electronically by specified deadlines ranging from late 2025 through mid-2026, with submission formats limited to a five-page technical brief or fifteen-slide presentation in Phase 1, followed by more detailed proposals if selected. Only entities registered in SAM.gov with a valid Unique Entity ID are eligible for award, and while socioeconomic status or small business classification is not mandatory to disclose, nontraditional contractors and small businesses are encouraged to respond. Evaluation is based on a trade-off process focusing first on technical merit and feasibility—including innovation and manufacturability—followed by industrial base impact, speed and scalability of implementation, price reasonableness, private investment leverage, and a credible transition plan to sustained production. Performance is expected to occur at Red River Army Depot inTEXARKANA, Texas, with inspection and acceptance governed by established military standards such as MIL-DTL-11891, MIL-STD-105, and ASTM specifications for materials and workmanship. Final awards are contingent upon funding availability and contractual negotiations, with no obligation implied by submission or selection. Invoicing must

POSTED

about 18 hours ago

DEADLINE

Evaluations, Assessments and Support Services (EASS)NASA Langley Research Center is conducting market research through a Request for Information and Sources Sought notice to inform the upcoming procurement of the Evaluations, Assessments, and Support Services (EASS) contract, aiming to identify industry capabilities and foster competition, especially among small businesses, Historically Black Colleges and Universities, and Minority Institutions. The procurement, classified under NAICS code 541715 with a size standard of 1,000 employees, will support the Science Office for Mission Assessments by providing evaluations of proposal and Phase A reports in accordance with NASA guidelines, independent assessments of missions and programs using established NASA policies, and comprehensive support services including technical, managerial, cost, and schedule analyses. The government anticipates a single-award, indefinite-delivery, indefinite-quantity contract with both cost-plus-fixed-fee and firm-fixed-price task orders, and is actively seeking industry feedback on contract structure, commerciality, incentive alignment, and ways to streamline procurement processes. Respondents are required to submit capability statements not exceeding ten pages, detailing their organizational structure, size designation, past performance, technical expertise in evaluation and assessment functions, and their approach to managing organizational and personal conflicts of interest, with particular attention to the draft Data Requirements Document on OCI Plans. Firms must also confirm their ability to support work requiring access to Top Secret/Sensitive Compartmented Information, either through existing facility clearance or the capacity to obtain one with NASA sponsorship. Responses are due by August 5, 2026, and must be submitted electronically without export-controlled information; while submissions are voluntary and not compensated, they will inform NASA’s acquisition strategy, with proprietary information marked as confidential protected under the Freedom of Information Act.

NASA Langley Research Center

POSTED

about 18 hours ago

DEADLINE

MXO Office-wide Innovative Solutions OpeningThe Defense Advanced Research Projects Agency’s Multi X Office is seeking revolutionary research concepts through an open, rolling-call solicitation under DARPA-PS-26-115, targeting high-risk, high-reward innovations that exceed evolutionary improvements to current technologies. This solicitation, issued under the authority of 10 U.S.C. §§ 4021, 4022, and 4023, enables the use of Other Transactions for Research and Prototype agreements, allowing flexibility in contract structure and intellectual property arrangements. Proposals must align with one of three technical thrusts: developing novel materials and components beyond traditional CMOS foundations to ensure resilient and secure systems; establishing indigenous supply chains and tools for domestic design and production of critical technologies; or advancing new sensing, orienting, computing, and communicating modalities that redefine mission effects. The solicitation explicitly excludes research that merely refines existing capabilities and emphasizes transformative breakthroughs in science, components, or systems. All submissions must be made electronically via DARPA’s Broad Agency Announcement Tool, with an initial abstract required prior to any full proposal invitation, and abstracts must be submitted by April 23, 2027, with full proposals due by June 4, 2027, on a rolling basis following review. Abstracts must not exceed six pages, be unclassified or Controlled Unclassified Information, include a Rough Order of Magnitude cost estimate, and follow strict formatting guidelines. Full proposals must include two volumes—Technical and Management, and Price—along with additional supporting documents like the Proposal Summary Slide and Price Summary Spreadsheet, and require mandatory disclosure of any AI tools used in preparation. Proposers must be registered entities with a Unique Entity ID, CAGE code, and Taxpayer Identification Number, and must comply with NIST SP 800-171 rev 2 cybersecurity requirements unless the work qualifies as fundamental research, in which case safeguards apply only if the project scope changes. Government entities, FFRDCs, and UARCs face additional eligibility constraints, including demonstrating that the proposed work is not otherwise available through the private sector and providing legal authority documentation, with 15 U.S.C. § 3710a deemed insufficient. Foreign nationals and U.S. permanent residents participating in presentations must be covered by an eForm 60, and prime contractors are responsible for ensuring compliance across all subawardees. Evaluations prioritize overall scientific and technical merit, including innovation, feasibility, team expertise,

Defense Advanced Research Projects Agcy

POSTED

about 18 hours ago

DEADLINE

Fabrication and Flow Field Quantification of Transparent Micronozzle Flow ModelsThe contract calls for the fabrication of optically transparent flow models mimicking 22-Gauge and 25-Gauge micronozzle tips and extensions to study fluid dynamics relevant to medical device evaluation. These models will be used to conduct particle velocimetry and pressure measurements, enabling detailed characterization of blood flow behavior under controlled conditions. The research aims to support the FDA’s assessment of hemodynamic performance in medical devices, particularly focusing on flow patterns and shear forces in microscale geometries. The solicitation, numbered 75F40126Q00294, was posted on July 22, 2026, with a response deadline of July 31, 2026, and is designated as a Total Small Business Set-Aside under NAICS code 541715. It is administered by the FDA Negotiated Contracts Branch within the Department of Health and Human Services, with performance based in Silver Spring, Maryland, and the office located in Rockville. Primary point of contact is Sheila Brown, with Ian Weiss as secondary contact, both reachable via FDA email addresses. The contract is available for review through the SAM.gov platform.

FDA Negotiated Contracts Branch

POSTED

about 18 hours ago

DEADLINE

Metalex Cobalt and Copper Production ExpansionThe U.S. Trade and Development Agency is supporting a feasibility study for the Metalex Cobalt and Copper Production Expansion project in Zambia, funded under Activity No. 2025-11011A. This initiative aims to assess the technical and economic viability of expanding cobalt and copper production capabilities, with the goal of fostering sustainable development and economic growth in Zambia through U.S. private sector expertise. Interested American companies must submit proposals by the deadline of August 21, 2026, at 8:59 p.m. Eastern Time, following the solicitation issued by the agency. All relevant details and application instructions are available on the USTDA’s official website. The solicitation is classified as a special notice and is administered by the United States Trade and Development Agency, headquartered in Arlington, Virginia. There is no set-aside designation for small businesses or other categories, and the North American Industry Classification System code is not specified. Proposals must address the scope of the feasibility study for the Zambian expansion, and while the exact place of performance is not detailed, the work will primarily relate to the project site in Zambia. U.S. firms seeking to participate can access the full Request for Proposal through the provided SAM.gov link and are encouraged to engage directly with the agency for clarification on requirements.

US Trade And Development Agency

POSTED

about 18 hours ago

DEADLINE

Geostationary Littoral Imaging and Monitoring Radiometer (GLIMR) Access to Space (ATS) “GLIMR ATS"The National Aeronautics and Space Administration (NASA) Langley Research Center is soliciting proposals for the Geostationary Littoral Imaging and Monitoring Radiometer Access to Space (GLIMR ATS) contract, identified by solicitation number 80LARC26R0002, with a response deadline of September 4, 2026. The contract requires a comprehensive suite of space mission services centered on the GLIMR instrument, including spacecraft and launch vehicle procurement, integration planning, ground system design and testing, end-to-end payload and spacecraft integration and pre-launch processing, spectrum licensing, orbital slot authorization, launch execution, in-orbit checkout, and sustained on-orbit operations. Performance is expected at the contractor’s facility and other approved sites, with inspections and formal acceptance also occurring at the contractor’s location. The contract is firm-fixed-price, with an estimated value of $7 billion, and includes baseline services plus three option periods extending up to 30 months beyond the initial performance period, though all pricing is to be proposed. The solicitation mandates submission of four distinct proposal volumes covering past performance, technical approach and oral presentation, price with milestone payment schedules, and business compliance including AI disclosure and small business participation plans, all submitted electronically via NASA’s EFSS Box portal using specified file formats and naming conventions. The proposal evaluation will be based on a trade-off process where past performance, technical approach/oral presentation, and price are considered in that descending order of importance, with price roughly equal in weight to the combined non-price factors. Offerors must demonstrate high confidence in past performance, excellence in technical approach, and competitive pricing to secure award. Strict contamination control standards apply, prohibiting silicone-based materials unless approved and requiring molecular deposition levels not exceeding 150Å, governed by IEST-STD-CC1246 and ASTM E595 for outgassing. Quality systems must comply with AS9100, MIL-STD-461G for electromagnetic compatibility, and NASA-STD-4003 for electrical bonding. Unique Entity IDs and CAGE codes are mandatory, and offerors must declare size status and any socioeconomic certifications in SAM. Extensive organizational conflict of interest (OCI) requirements are embedded, mandating a detailed OCI Plan with employee training, disclosure of all past and current federal contracts, financial interest disclosures, and flowdown to subcontractors. Security requirements under NFS 1852.240-76 compel submission of an Information

NASA Langley Research Center

POSTED

about 18 hours ago

DEADLINE

in about 1 month

ACC-DTA Ground Maneuver Commercial Solutions Opening (CSO)The ACC-DTA Ground Maneuver Commercial Solutions Opening (CSO), identified by solicitation number W912CH-26-S-0001, authorizes the Department of the Army to rapidly procure commercially available technologies and innovative solutions through a streamlined, competitive process under DFARS Subpart 212-70. This CSO supports Army modernization priorities by accelerating the integration of cutting-edge manufacturing and ground vehicle system capabilities to enhance warfighter readiness. Awards may be made under FAR Part 12 commercial item procedures, 10 U.S.C. 4022 transaction agreements, or 31 U.S.C. 6305 cooperative agreements, and will be structured as fixed-price or fixed-price incentive fee contracts. The solicitation is open until January 9, 2029, with the possibility of extension, and allows for continuous addition of new Areas of Interest with flexible closing dates throughout its duration. Proposals must address specific Areas of Interest related to ground maneuver systems and may include commercially available products, concept demonstrations, pilot programs, or agile development efforts that incrementally improve existing technologies or capabilities. Offerors must be registered in the System for Award Management (SAM) with an active Unique Entity ID and must also enroll in the Wide Area Work Flow system to be eligible for award, with failure to meet these requirements disqualifying respondents. Proposals must be submitted via email to designated points of contact and must be unclassified, with no confidential markings permitted. Technical proposals must include a detailed work plan, technical approach with underlying assumptions, organizational structure and staffing, suggested deliverables with timelines, and must not assume government-provided resources. Price proposals must provide a rough order of magnitude cost estimate including labor categories, hours, hourly rates, and material costs, with affordability being a key evaluation factor. Evaluation focuses on responsiveness to the Area of Interest, technical merit and innovation, affordability, innovative application of commercial technology, intellectual property restrictions, and supplemental details from the initial submission. All responses must comply with the Procurement Integrity Act, Controlled Unclassified Information handling requirements under 32 CFR Part 2002, and may be subject to Trade Agreements Act and Buy American Act compliance, particularly when involving critical components or the TIGER Hackathon. Vendors must not be suspended or debarred, and technical data with military applications may require export authorization. The contracting office is located in Warren, Michigan, with primary point of contact Kimberly A. Nelson and agreements officer Matthew

POSTED

about 18 hours ago

DEADLINE

in over 2 years

Notification of Intent for Battlespace Modeling and Simulation (BMS) Engineering ServicesThe U.S. Naval Air Warfare Center Air Division is seeking industry input through a Notification of Intent for Battlespace Modeling and Simulation Engineering Services under solicitation number N00421-25-RFPREQ-54000MA-0059_NOI7, with a response deadline of August 6, 2026. This effort is aimed at securing engineering support for advanced modeling and simulation capabilities within the battlespace domain, and no small business set-aside is planned. The solicitation is classified under NAICS code 541715 and is managed from the agency’s office in Patuxent River, Maryland, with performance expected to occur in St. James, Maryland. Primary point of contact for inquiries is Karen Joachim, with Tess Beukers as the secondary contact. Projected timelines indicate the draft request for proposal will be released in the fourth quarter of fiscal year 2026, followed by the final RFP in the first quarter of fiscal year 2027. Proposals are due in the second quarter of fiscal year 2027, with contract award anticipated in the first quarter of fiscal year 2028. The contract ordering period is set to begin in the second quarter of fiscal year 2028, signaling the start of active task execution. All dates are subject to change and serve as planning estimates only.

Naval Air Warfare Center Air Division

POSTED

about 18 hours ago

DEADLINE

Expedited Research Innovation System (ERIS)The Defense Advanced Research Projects Agency (DARPA), in partnership with The Applied Research Institute (ARI), is operating the Expedited Research Innovation System (ERIS), an open-call digital marketplace designed to identify, assess, and rapidly acquire groundbreaking technologies through Other Transaction Authority. This initiative, solicited under DARPA-PS-25-05, invites industry, academia, and individual innovators to submit video pitches that demonstrate novel or newly applied technologies capable of advancing national security priorities. Submissions are evaluated monthly, with deadlines at noon Eastern Time on the last day of each month, and must conform to strict technical specifications: a single 7-minute MP4 video in 720p resolution under 1 GB, using Rec709 or sRGB color space, and containing only a valid copyright notice. The video must clearly articulate the problem being solved, the current state of the art, the proposed advancement, team expertise, and potential defense or commercial impact. The solicitation does not include pricing, line items, or estimated contract values, as awards are negotiated post-assessment on a case-by-case basis, with no ceiling on award amounts. Evaluations are conducted by a peer review panel of government, industry, and academic subject matter experts under strict organizational conflict of interest protocols, including mandatory ethics training, non-disclosure agreements, and prohibitions on reviewing submissions in which assessors have financial interests. Technical merit is assessed using two weighted factors: advancement of the state of the art (40%) and team capability (60%), with awards determined by a trade-off approach based solely on technical excellence and not cost. Submissions must align with specified topic areas including AI/ML convergence with chemistry and biology, human performance optimization, sensing systems, resilience against chemical and biological threats, and advanced metrology, while excluding previously solicited areas such as elusive target tracking. All deliverables are digital; no physical packaging, labeling, or MIL-STD compliance is required. Eligible offerors must provide a unique entity identifier from SAM.gov and disclose small business status or nontraditional contractor affiliation, with foreign ownership requiring additional disclosure and possible mitigation. The entire process—submission, assessment, negotiation, and potential award—is conducted through the ERIS portal, enabling government organizations to quickly discover, review, and engage with breakthrough innovations without traditional competition.

Defense Advanced Research Projects Agcy

POSTED

about 18 hours ago

DEADLINE

SBIR: Art of Novel Signals: Predicting and Forecasting with High ConfidenceThe contract solicitation titled SBIR Art of Novel Signals: Predicting and Forecasting with High Confidence seeks to advance predictive modeling through Temporal Knowledge Graph Forecasting and In-Context Learning using novel, multilingual, and multimodal data sources. It is issued under the Small Business Innovation Research program with a total small business set-aside, meaning only eligible small businesses with fewer than 500 employees may apply. The effort is sponsored by the Department of Defense through the Small Business Projects Office and is focused on developing high-confidence forecasting capabilities that can extract insights from complex, cross-domain signals, integrating temporal relationships, language diversity, and multiple data modalities. The solicitation was posted on July 22, 2026, with a firm response deadline of August 19, 2026, and the place of performance and point of contact details have not been specified. Interested parties must submit proposals through the official DARPA opportunity portal to be considered for funding under this SBIR mandate.

Small Business Projects Office

POSTED

DEADLINE

More opportunities from National Aeronautics And Space Administration → NASA Shared Services Center

Same awarding agency

Supply of Wire Marking and Labeling TapesThe contract is for the supply of color-coded label tapes in specific formats—Black on Yellow, Green, Blue, and Red—meeting Tze-641, Tze-741, Tze-541, and Tze-441 specifications, intended for circuit identification at Stennis Space Center. These tapes are critical for accurate electrical and wiring system labeling to support operational safety and maintenance protocols. The requirement is issued as a subcontract under a Total Small Business Set-Aside designation, ensuring exclusive eligibility for small businesses as defined by the SBA, with the NAICS code 323111 indicating the scope aligns with commercial printing activities. Performance is solely located at Stennis Space Center, Mississippi, with a zip code of 39529, and the contract was posted on July 22, 2026, with responses due by July 27, 2026. The contracting entity is the NASA Shared Services Center on behalf of the National Aeronautics and Space Administration, and all submissions must comply with standard federal subcontracting procedures under the Federal Acquisition Regulation.

Commercial Printing (except Screen and Books)

POSTED

about 18 hours ago

DEADLINE

Supply of Electrical Compression Lugs and Hardware KitThe contract is for the supply of 100 each of compression lugs, tie wraps, nuts, bolts, and washers specifically for electrical terminations, with all items required to be properly packaged and labeled in accordance with government standards. The procurement is structured as a subcontract under a Total Small Business Set-Aside, meaning only small businesses qualify to bid, as defined by the Small Business Administration and FAR 19.5. The North American Industry Classification System code is 335999, indicating it falls under Other Electrical Equipment and Component Manufacturing. The work is to be performed at Stennis Space Center, Mississippi, with a zip code of 39529. The solicitation was posted on July 22, 2026, and responses are due by July 27, 2026. The awarding agency is the NASA Shared Services Center, operating under the National Aeronautics and Space Administration.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 18 hours ago

DEADLINE

Supply of Conduit Fittings (Bushings & Liquidtight Connectors)The contract calls for the supply of 48 conduit bushings and 48 liquidtight connectors, all of which must comply with specified bid requirements and be delivered within 30 days under FOB destination terms. These items are intended for an electrical installation at Stennis Space Center, Mississippi, with the delivery point tied to that location. The solicitation is designated as a Total Small Business Set-Aside under FAR 19.5, ensuring that only eligible small businesses can compete. The NAICS code 332323 identifies the industry classification as Electrical and Electrical Equipment and Parts Manufacturing, aligning with the nature of the fittings being procured. The contract was posted on July 22, 2026, with a response deadline of July 27, 2026, and is issued under the NASA Shared Services Center on behalf of the National Aeronautics and Space Administration.

Ornamental and Architectural Metal Work Manufacturing

POSTED

about 18 hours ago

DEADLINE

Supply of #6 THHN Stranded Copper WireThe contract calls for the supply of 1,560 feet of #6 THHN stranded copper wire in four insulated colors—red, green, black, and blue—meeting branded or equivalent industry specifications. Delivery is specified as FOB destination, meaning the supplier is responsible for all transportation costs and risks until the materials arrive at the designated location. The wire must comply with applicable standards for performance and quality, ensuring suitability for electrical applications in a federal facility setting. This is a small business set-aside contract under the SBA’s Total Small Business Set-Aside program, restricted exclusively to small businesses as defined by the NAICS code 335999. The solicitation was posted on July 22, 2026, with responses due by July 27, 2026. Performance of the contract is required at Stennis Space Center, Mississippi, with a ZIP code of 39529. The awarding agency is the NASA Shared Services Center, acting on behalf of the National Aeronautics and Space Administration, and the opportunity is available through the SAM.gov platform for eligible small businesses to submit proposals.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 18 hours ago

DEADLINE

Application Engineering Support ServicesThe contract involves the provision of eight hours of specialized application engineering support focused on the integration and configuration of Schneider Electric X80 series hardware for use at NASA Glenn Research Center. This support is intended to ensure seamless compatibility and optimal performance of the hardware within NASA’s operational environment, requiring technical expertise in industrial automation systems and familiarity with Schneider Electric’s product line. The work is classified as a subcontract under NAICS code 541330, which encompasses engineering services, and is managed by the NASA Shared Services Center on behalf of the National Aeronautics and Space Administration. The solicitation was posted on July 22, 2026, with a response deadline set for July 27, 2026, at 1:00 PM, indicating a tightly scheduled procurement process. No specific place of performance has been designated, and there is no publicly listed point of contact or set-aside classification, suggesting the work may be performed remotely or at an unspecified NASA facility. The contract does not specify duration beyond the eight hours of support, nor does it include details on deliverables beyond the configuration and integration tasks, implying that success will be measured by functional deployment and verification of the X80 hardware system.

Engineering Services

POSTED

about 18 hours ago

DEADLINE

Industrial Automation Hardware Supply (Schneider Electric X80 Series Components)NASA Shared Services Center is soliciting subcontractors to supply commercial off-the-shelf Schneider Electric X80 series industrial automation components, including backplane extenders, power supplies, discrete I/O modules, and terminal blocks, to support mission-critical automation systems. The procurement is open for bids with a response deadline of July 27, 2026, and the contract type is designated as a subcontract under NAICS code 423690, which pertains to other industrial machinery and equipment merchant wholesalers. The components must meet established commercial specifications and are intended for use in industrial environments under the operational purview of the National Aeronautics and Space Administration. Bidders are expected to deliver fully compliant hardware without customization, ensuring seamless integration into existing automation infrastructures, with no specific place of performance designated beyond the general scope of NASA’s operational needs.

Other Electronic Parts and Equipment Merchant Wholesalers

POSTED

about 18 hours ago

DEADLINE

Trade-In and Decommissioning of Legacy CMM UnitNASA Shared Services Center is seeking a subcontractor to handle the removal, decommissioning, and responsible disposition of an existing CMM unit being replaced. The scope includes safely deactivating the legacy equipment, transporting it from the site in Hampton, Virginia, 23681, and ensuring its proper recycling, resale, or disposal in full compliance with environmental and regulatory standards. All activities must be completed by the response deadline of July 24, 2026, at 9:00 PM, following the solicitation posted on July 22, 2026. The work falls under NAICS code 562920 for Other Waste Management Services and is classified as a subcontract opportunity with no set-aside designation. The successful vendor must demonstrate proven capabilities in handling sensitive technical equipment and providing documented evidence of environmentally sound end-of-life management practices.

Materials Recovery Facilities

POSTED

about 18 hours ago

DEADLINE

CMM Installation and Commissioning ServicesThe contract calls for on-site delivery, installation, calibration, and commissioning of a new CMM unit at NASA’s facility in Hampton, Virginia, with a zip code of 23681. The work is classified under NAICS code 238220, indicating it falls under the category of structural steel and precast concrete work, though the specific nature of the CMM unit installation suggests specialized precision equipment setup. The contract is structured as a subcontract under the NASA Shared Services Center on behalf of the National Aeronautics and Space Administration, and the solicitation was posted on July 22, 2026, with responses due by 9:00 PM on July 24, 2026. All activities must occur at the designated NASA location, requiring the contractor to manage logistics, personnel access, and compliance with federal facility protocols for sensitive instrumentation. The project timelines are tight, with only two business days for submission, suggesting urgency in procuring qualified vendors capable of executing complex technical installations under federal oversight.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

about 18 hours ago

DEADLINE

Brand-Name CMM Equipment Supply and ResaleThe contract involves the procurement and resale of a new Hexagon Global S Scan+ 12.15.10 Coordinate Measuring Machine from the original equipment manufacturer, requiring the bidder to hold authorized reseller status to ensure authenticity, warranty validity, and technical support compliance. The machine is a high-precision tool critical for metrology applications, and the agreement is structured as a subcontract under the NASA Shared Services Center, with performance taking place in Hampton, Virginia, at the 23681 zip code location. The solicitation was posted on July 22, 2026, with a strict response deadline of July 24, 2026, emphasizing a rapid procurement timeline. The NAICS code 423490 designates this as a transaction within the miscellaneous durable goods merchant wholesalers category, indicating a commercial supply chain focus rather than direct manufacturing. All parties must adhere to OEM authorization protocols to meet NASA's quality and traceability standards for critical measurement equipment.

Other Professional Equipment and Supplies Merchant Wholesalers

POSTED

about 18 hours ago

DEADLINE

10 MR556A4 rifles as scoped and designed for the GRC Office of Protective ServicesNASA’s Office of Protective Services at the Glenn Research Center is procuring ten HK MR556A4 rifles, specifically scoped and configured for operational use, under a sole-source acquisition justified by the unique capabilities and established interoperability of this platform with existing NASA protective services infrastructure. The procurement, identified by solicitation number 80NSSC26938178Q and posted on July 22, 2026, with responses due by July 28, 2026, is being conducted through the NASA Shared Services Center located at Stennis Space Center, Mississippi. The acquisition is non-competitive due to the exclusive suitability of the HK MR556A4 rifle and the specialized support provided by PAI Defense, the sole authorized vendor with proven familiarity with NASA’s armorer systems, training curricula, and logistics protocols. The total estimated contract value is $41,827.60, and delivery must be completed no later than September 30, 2026, with performance and acceptance occurring at Stennis Space Center. Evaluation priorities emphasize operational reliability under extreme conditions, compatibility with existing NASA equipment, standardization across multiple centers, and superior performance characteristics, with cost not serving as a primary selection factor. The rifles must be delivered with immediate operational readiness, accompanied by a lifetime barrel warranty, and must comply with federal standards for defense-grade equipment, including secure, climate-controlled, and tamper-evident packaging with traceable labeling and barcoding consistent with federal asset tracking requirements. No formal clause list, Section K certifications, or SME identification for the offeror are provided, and while no specific MIL-STD or funding account codes are articulated, the procurement is supported by a formal brand-name justification and operates under a trade-off evaluation framework prioritizing mission readiness over pricing. The contracting office may be contacted through Sara Jusino-Terry or Karen Artis, and the program manager for operational oversight is Eric J. Combs, associated with the GRC Office of Protective Services.

Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 18 hours ago

DEADLINE

Hexagon Global S Scan+ 12.15.10 CMM with Installation and Trade-InThis contract mandates the procurement of a single Hexagon Global S Scan+ 12.15.10 CMM including installation and a trade-in arrangement, with a strict brand name requirement that excludes alternatives. Only vendors who are authorized resellers or distributors of the original equipment manufacturer are eligible to bid, and all offerors must submit verifiable proof of pricing directly from the manufacturer along with formal confirmation of their authorization to resell the specified equipment. Failure to provide this documentation will result in disqualification regardless of other qualifications. The requirement is issued under solicitation number 80NSSC26938247Q with a response deadline of July 24, 2026, at 9:00 PM Eastern Time, and all communications must reference this number in the subject line to ensure proper processing. The contract is administered by the NASA Shared Services Center under the National Aeronautics and Space Administration, with the place of performance located in Hampton, Virginia, and the primary point of contact is Lindsey McLellan at lindsey.m.mclellan@nasa.gov. The NAICS code 334513 applies, and no set-aside provisions are in effect, meaning all small and large businesses may compete provided they meet the brand and authorization criteria.

Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables

POSTED

about 18 hours ago

DEADLINE

Schneider Electric HW & SupportNASA/NSSC is issuing a sole-source contract to Crescent Electric Supply Company for Schneider Electric hardware and related support services under FAR 12.102(a), determining that this vendor is the sole provider of the required commercial items. The procurement is for industrial automation components including backplane extenders, power supplies, discrete I/O modules, and terminal blocks, along with eight hours of application engineering support at $200 per hour, resulting in a total estimated value of $1,600. All hardware items are specified by exact part numbers and must be factory-built to order with a delivery lead time of ten business days. Performance will occur at NASA Glenn Research Center in Cleveland, Ohio, with no fixed delivery dates other than the ARO (As Required/Ordered) schedule. The solicitation explicitly states that no price quotes will be reviewed or accepted, and the award is non-competitive based solely on the vendor’s unique status as the sole source. Offerors may submit their capabilities and qualifications by 8:00 a.m. Central Standard Time on July 27, 2026, but only to assist the government in determining whether to proceed with a competitive or sole-source approach; this submission does not constitute a bid. Communication must be in writing, reference the solicitation number 80NSSC26937863Q, and exclude oral responses. The acquisition follows commercial item procedures under FAR Part 12, with no set-aside provisions, no specified packaging or marking standards, and no detailed inspection or acceptance criteria outlined. The NASA FAR Supplement clause 1852.215-84 (Ombudsman) applies, and inquiries should be directed to Monica Wilson or Karen Artis. No pricing is provided for the hardware line items, and no accounting, payment, invoicing, or CAGE/UEI information is included in the solicitation.

Current-Carrying Wiring Device Manufacturing

POSTED

about 18 hours ago

DEADLINE