Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

Reverse Engineering & Technical Data Package (TDP) Development

Active
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the reverse engineering of legacy mechanical, electrical, and structural components from military systems to develop fully qualified Level 3 Technical Data Packages compliant with MIL-STD-31000 standards. This effort involves detailed analysis and documentation of existing hardware to recreate precise engineering specifications, ensuring that the resulting data packages support sustainment, reproduction, and interoperability of defense equipment without reliance on original manufacturer documentation. The work demands high precision, adherence to military technical data requirements, and the ability to interpret and reconstruct complex components from limited or degraded physical samples. The opportunity is structured as a subcontract under the Department of Defense, with the performing office identified as W6QK Acc Anad. The place of performance is designated with a zip code of 36201, indicating the physical location where the reverse engineering and data package development must occur. Interested parties must submit proposals by August 10, 2026, and the North American Industry Classification System code 541715 signifies that the work falls under scientific and technical consulting services. The solicitation does not specify set-asides or point of contact information, and responses must align strictly with the technical and compliance requirements of MIL-STD-31000 to be considered for award.

General Info

Reverse engineer military components to create MIL-STD-31000-compliant Level 3 TDPs by August 10, 2026, at 36201.

Agency

Department Of Defense → W6QK Acc AnadView Agency

NAICS

541715 - Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)View NAICS

Place of Performance

AL, 36201, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

Posted

subcontract

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → W6QK Acc Anad
ContactsNo contacts available
OfficeN/A
Organization / Agency
Department Of Defense → W6QK Acc Anad
View Agency Profile
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Reverse engineer legacy mechanical, electrical, and structural components from military systems to produce qualified Level 3 Technical Data Packages (TDPs) compliant with MIL-STD-31000.

Similar Contracts

Same NAICS industry code

NAICS: 541715
New
Federal
CDRH Clinical Study Service ContractThe U.S. Food and Drug Administration’s Center for Devices and Radiological Health is soliciting commercial clinical study services under solicitation number 75F40126Q00193, with proposals due by August 4, 2026. The contract is a Firm Fixed Price (FFP) award for remote performance of a clinical study involving the collection, annotation, and delivery of 12-lead ECG data from 150 subjects in the base year and 35 subjects per optional year, alongside the development of a synthetic retrospective dataset of at least 4,000 subjects to support the validation of an FDA-developed ECG signal transformation framework for AI/ML-enabled cardiovascular devices. Performance is scheduled to begin September 30, 2026, with up to four one-year optional extensions through September 29, 2031. All deliverables, including approved study protocols, de-identified datasets, monthly progress reports, and a final public-ready dataset, must comply with FDA and IRB requirements, HIPAA standards for de-identification, and FDA-approved data collection procedures. The contract requires continuous monitoring of signal quality, synchronization of FDA-approved ECG devices, and collection of comprehensive metadata during resting, supine conditions. Offerors must demonstrate extensive experience in AI and machine learning applications for 10 or more years, a proven history analyzing wearable datasets, affiliation with a hospital within 10 miles of Silver Spring, Maryland, and a track record of conducting at least five clinical studies involving both healthy and unhealthy subjects, including publications in prestigious journals. Proposals must be submitted electronically via email to Natalie.Brown@fda.hhs.gov by the deadline, formatted into two volumes: a Technical Approach detailing methodology and personnel resumes, and a Price volume using the provided attached Price Sheet, which currently contains no populated values. All offerors must have an active UEI in SAM.gov, maintain compliance with employment eligibility, anti-trafficking, and cybersecurity regulations, and adhere to clauses covering whistleblower protections, subcontractor exclusions, paid sick leave, and data safeguarding. Payment must be processed exclusively through the U.S. Treasury’s Invoice Processing Platform, with no physical delivery or FOB terms applicable. The government will evaluate proposals based on technical merit and overall advantage, not solely on price, and will select the offeror best positioned to deliver high-quality, compliant clinical data under strict oversight. Security clearances are not required, but robust data protection measures
FDA Office Of Acq Grant Svcs

POSTED

about 9 hours ago

DEADLINE

in 8 days
View Details
NAICS: 541715
New
Federal
ARMY OPEN SOLICITATION (AOS)The Army Open Solicitation (AOS), identified by solicitation number W9128Z-25-S-A002 and issued by the U.S. Army Contracting Command – Aberdeen Proving Ground, is an indefinite, open solicitation designed to rapidly acquire innovative commercial technologies and research-driven solutions across all Army mission areas to enhance lethality and revitalize the industrial base. It remains active until officially canceled and operates through two primary pathways: Active Capability Gap submissions and targeted Calls for Solutions, each with distinct procedures and evaluation phases. The solicitation leverages a broad array of statutory and regulatory authorities, including FAR 6.102(d)(2), DFARS 235.016, 10 U.S.C. §§4021–4023 and 3458, and the Commercial Solutions Opening framework, enabling the use of Other Transactions, fixed-price, and cost-type contracts to facilitate flexibility and speed in acquisition. Submissions are evaluated holistically based first on Technical Merit—assessing relevance, innovation, and gap closure—followed by Viability, Feasibility and Desirability, and finally Schedule and Price, with no fixed pricing published and costs determined through post-award negotiation using Rough Order of Magnitude estimates. All submissions must be unclassified, and offerors are required to provide entity identifiers such as UEI and CAGE codes, verify business size and socioeconomic status, and disclose any participation by Nontraditional Defense Contractors or Nonprofit Research Institutions. Attachments, specifically Attachment 1 detailing ACG procedures, have been revised multiple times through 2026, with all amendments uploaded and previous versions removed to ensure transparency. Contracting is conducted via email submissions to designated government points of contact, with proposals limited to 10 pages of technical content in PDF format and requiring an organizational conflict of interest analysis. The solicitation prohibits reimbursement of pre-award expenses and includes strict data handling requirements mandating that all DoD data remain within U.S. jurisdiction and be logically isolated from non-Government information. Security clearances, including Secret facility clearance, may be required in later phases, and all award decisions are subject to funding availability and formal contract execution by a Government contracting officer.
W6QK Acc-Apg Cont Ct Software Sector

POSTED

about 9 hours ago

DEADLINE

N/A
View Details
NAICS: 541715
New
Federal
HIP Optimization Study for GRX-810The solicitation titled HIP Optimization Study for GRX-810, under notice number 80NSSC26938863Q, is a total small business set-aside for services classified under NAICS code 541715, aimed at supporting NASA Shared Services Center’s objectives through a research and development study. Bidders must be small businesses as defined by the SBA and are required to include their CAGE or UEI code, FOB destination terms, delivery lead time, and a dedicated point of contact name and email address in their submission. All proposals must reference the solicitation number in the email subject line, and submissions must be received by the response deadline of August 3, 2026, at 1:00 PM Eastern Time. Questions regarding the RFQ must be submitted no later than three days after the posting date of July 27, 2026. The place of performance is not specified, but the contracting office is located at Stennis Space Center, Mississippi. Payment will not be made via credit card and vendors must review all attachments referenced in the posting. Primary point of contact is Monica Wilson at monica.d.wilson@nasa.gov, with Karen Artis as the secondary contact.
NASA Shared Services Center

POSTED

about 9 hours ago

DEADLINE

in 7 days
View Details
NAICS: 541715
New
Grant
ROSES25: D.8 Habitable Worlds Observatory Precursor Science InvestigationThis program element, ROSES25: D.8 Habitable Worlds Observatory Precursor Science Investigation, is part of NASA’s 2025 Research Opportunities in Space and Earth Sciences solicitation and requires a mandatory Notice of Intent to be submitted via NSPIRES by September 10, 2026, with full proposals due by October 26, 2026. Proposals are subject to a revised 7-page limit for the Science, Technology, and Management section, differing from the standard ROSES-2025 requirements, and must adhere to the specific content guidelines outlined in the official program element document. Starting August 5, 2026, all Principal Investigators and Co-Investigators who will dedicate ten percent or more of their time to the project must complete NASA-acceptable research security training, which can be satisfied through four online modules from the NSF’s Research Security Training website or the SECURE Center’s condensed version. This program aims to advance precursor science critical to the future Habitable Worlds Observatory, supporting foundational research that informs the observatory’s design and scientific objectives. Awards will typically be issued as grants with a standard three-year performance period, though exceptions may apply, and proposals are open to all eligible organizations including government, academic, nonprofit, and for-profit entities, with no restrictions on international collaboration except where explicitly noted. Funding for Co-Investigators at government laboratories will be provided through inter- or intra-agency transfers. All proposers must use Grants.gov if submitting a formal proposal and are strongly encouraged to consult the official PDF of the program element details, accessible via ROSES-2025 Tables 2 or 3, to ensure compliance with all technical and administrative requirements. For further inquiries, the point of contact is Megan C. Ansdell at NASA, and general ROSES questions may be directed to sara@nasa.gov.
NASA Headquarters

POSTED

about 17 hours ago

DEADLINE

in 3 months
View Details
NAICS: 541715
New
Federal
INSPIRING GENERATIONS OF NEW INNOVATORS TO IMPACT TECHNOLOGIES IN ENERGY 2026 (IGNIITE 2026)The INSPIRING GENERATIONS OF NEW INNOVATORS TO IMPACT TECHNOLOGIES IN ENERGY 2026 (IGNIITE 2026) solicitation, identified by DE-FOA-0003624, is a federal funding opportunity issued by the Advanced Research Projects Agency–Energy (ARPA-E) under the Department of Energy to advance transformative energy technologies that enhance U.S. economic and energy security. The solicitation focuses on reducing foreign energy imports, lowering greenhouse gas emissions, improving energy efficiency across all sectors, and developing solutions for managing radioactive waste and enhancing grid resilience. This modification updates key deadlines for submitting questions and full applications, with the final proposal submission due by August 26, 2026, at 1:30 PM ET. All applications must be registered and submitted via the ARPA-E eXCHANGE portal, and submissions through other platforms will not be accepted. Applicants are directed to the ARPA-E eXCHANGE User Guide for technical assistance and must contact ExchangeHelp@hq.doe.gov for portal-related issues. General inquiries should first refer to the publicly available Frequently Asked Questions, with additional questions directed to ARPA-E-CO@hq.doe.gov. The opportunity is open to entities seeking to support innovation in energy technologies aligned with ARPA-E’s mission as authorized under the America COMPETES Act and the Energy Act of 2020.
Advanced Rsrch Proj Agency ARPA-E

POSTED

about 17 hours ago

DEADLINE

in 30 days
View Details
NAICS: 541715
New
Federal
AI Behavioral Insights Engine DevelopmentThe contract seeks the development and refinement of an AI-driven engine designed to deliver personalized behavioral recommendations by analyzing real-time data trends in glucose levels, nutrition intake, sleep patterns, and stress markers. The goal is to create a sophisticated algorithm capable of interpreting complex physiological and lifestyle inputs to generate actionable, individualized insights that promote long-term health improvements, particularly for veterans requiring proactive behavioral interventions. The engine must be scalable, adaptive, and grounded in clinically relevant methodologies to ensure accuracy and utility in real-world settings. This is a subcontract under the Department of Veterans Affairs, specifically managed by the 261-NETWORK Contract Office 21, with a NAICS code of 541715 indicating it falls under scientific research and development services. The opportunity was posted on July 26, 2026, and responses are due by August 3, 2026, at 5:00 PM. The place of performance and point of contact details are not specified, suggesting flexibility in execution location and direct engagement may occur post-award. The project emphasizes data integration, predictive modeling, and user-centric design to translate complex biological signals into practical daily behavior adjustments.
261-NETWORK Contract Office 21 (36C261)

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 541715
New
Federal
Tympanometer Setup and Installation ServicesThe contract requires on-site configuration, calibration, and integration of six Titan V1 analyzers with existing systems, including the NOAH software, at the Washington DC VA Medical Center. This work must be performed at the specified location with a delivery deadline aligned to the response deadline of August 6, 2026, ensuring all devices are properly set up and fully functional within the facility’s current operational environment. The scope encompasses technical expertise to connect and synchronize the analyzers with legacy systems, guaranteeing seamless data flow and compatibility for clinical use. This subcontract falls under NAICS code 541715 and is managed by the Department of Veterans Affairs through the 245-NETWORK Contract Office 5. While no set-aside classification is specified, the performance site is located at 20422 in Washington, D.C., and all services must be completed on-site without remote intervention. The posting date is July 25, 2026, indicating this is a future opportunity with a defined window for submission, emphasizing a focused timeline for qualified contractors to respond and execute the technical integration tasks.
245-NETWORK Contract Office 5 (36C245)

POSTED

2 days ago

DEADLINE

in 10 days
View Details
NAICS: 541715
New
Federal
Assembly, Training, and Initial Inspection ServicesThis contract outlines services for the on-site or pre-delivery assembly, initial inspection, and clinical staff training required for aspirator units that are not delivered in a ready-to-use condition. The work includes ensuring proper functionality through assembly and inspection prior to deployment, as well as providing hands-on training to clinical personnel on the correct operation and routine maintenance of the equipment. The contract is designated as a small business set-aside under the SBA program, specifically a Total Small Business Set-Aside, and is classified under NAICS code 541715, which corresponds to research and development in the physical, engineering, and life sciences. The solicitation was posted on July 24, 2026, with a response deadline of July 31, 2026, and is issued by the Department of Veterans Affairs through its 248-NETWORK Contract Office 8. Performance of the services will occur at locations determined by the agency, and subcontractors must meet all small business eligibility requirements to compete for this award.
248-NETWORK Contract Office 8 (36C248)

POSTED

3 days ago

DEADLINE

in 4 days
View Details
NAICS: 541715
New
Federal
Network Protocol Testing Module DevelopmentThe contract seeks the development and integration of advanced protocol testing capabilities into an existing network tester platform, focusing on industry-standard protocols such as TCP/IP, MPLS, BGP, and OSPF. The work involves validating the functionality, accuracy, and reliability of these protocol implementations within the platform to ensure robust network performance evaluation under real-world conditions. The contractor will be responsible for designing, coding, and testing modules that enable comprehensive emulation, analysis, and diagnostic support for these protocols, ensuring compatibility and scalability across diverse network environments. This is a subcontract under the Department of Defense, with the placing agency identified as FA5613 700 Cons Pk, and the primary performance location is Ramstein. The solicitation was posted on July 24, 2026, with a response deadline of July 31, 2026. The North American Industry Classification System code is 541715, categorizing this effort under research and development in the physical, engineering, and life sciences. All deliverables must meet rigorous defense-grade technical standards, and the successful bidder will need to demonstrate proven experience in network protocol development and validation, with an emphasis on secure, high-performance network testing systems.
FA5613 700 Cons Pk

POSTED

3 days ago

DEADLINE

in 4 days
View Details
NAICS: 541715
New
Federal
Ongoing Technical Support & Maintenance ServicesThe contract is for ongoing technical support and maintenance services related to post-installation activities, including preventive maintenance, troubleshooting, and repair, with potential components of remote diagnostics and software optimization to ensure system reliability and performance. The services are intended to sustain operational efficiency and address technical issues as they arise, leveraging both remote and on-site capabilities where necessary. This is a subcontract opportunity under the NAICS code 541715, issued by the Department of Veterans Affairs through the 262-NETWORK Contract Office 22 and scheduled for response by July 31, 2026. Performance is required to be conducted in Phoenix, Arizona, with a zip code of 85012, though specific location details within the city are not provided. The solicitation was posted on July 24, 2026, and interested parties must submit proposals before the deadline to be considered for award.
262-NETWORK Contract Office 22 (36C262)

POSTED

3 days ago

DEADLINE

in 4 days
View Details
NAICS: 541715
New
Federal
Onsite Technical Installation and Integration SupportThe contract requires the onsite technical installation, configuration, and integration of an optical processor at the Oak Ridge National Laboratory, with a strict emphasis on compliance with safety regulations and the implementation of comprehensive hazard controls. All work must be performed at the designated facility in Oak Ridge, Tennessee, 37830, and must align with the Department of Energy’s standards for operational safety, engineering integrity, and environmental protection. The subcontractor is responsible for ensuring that every phase of the project, from initial setup to final system integration, adheres to applicable federal and lab-specific safety protocols, including the identification and mitigation of potential hazards associated with the optical processor’s deployment. This is a subcontract solicited under NAICS code 541715 for research and development in physical, engineering, and life sciences, with a response deadline of July 31, 2026. The contract is managed by UT-Battelle LLC, the Department of Energy’s contractor at ORNL, and no set-aside provisions apply. The work demands specialized technical expertise in optical systems, precise integration capabilities, and a documented history of handling sensitive or high-risk equipment within a federally funded research environment. Contractors must be prepared to operate under DOE oversight, coordinate with lab personnel, and deliver all deliverables within the specified timeframe without disruptions to ongoing laboratory operations.
Ornl Ut-Battelle Llc-Doe Contractor

POSTED

3 days ago

DEADLINE

in 4 days
View Details
NAICS: 541715
New
Federal
Design History File (DHF) and Manufacturing Specifications DevelopmentThe contract requires the development and delivery of a complete Design History File and final manufacturing specifications under the oversight of the CDC Office of Acquisition Services, with performance based in Atlanta, Georgia, 30329. The work is scoped to support the scale-up of a product or process, necessitating thorough documentation aligned with regulatory and quality standards to ensure traceability, consistency, and compliance throughout manufacturing transitions. The deliverables must reflect full adherence to CDC requirements and be submitted for review and approval prior to advancing production. This is a subcontract opportunity posted on July 24, 2026, with proposals due by July 29, 2026, and classified under NAICS code 541715 for research and development in the physical, engineering, and life sciences. The contracting entity operates under the U.S. Department of Health and Human Services, indicating that the project is tied to public health initiatives requiring rigorous documentation and oversight. While no set-aside designation is specified, the urgency of the deadline and the technical nature of the deliverables suggest the need for a qualified subcontractor with demonstrated experience in regulated manufacturing environments and design control systems.
CDC Office Of Acquisition Services

POSTED

3 days ago

DEADLINE

in 2 days
View Details

More opportunities from Department Of Defense → W6QK Acc Anad

Same awarding agency

NAICS: 334419
New
Federal
DIT MCO UnitsThe U.S. Army Contracting Command-Detroit, Anniston Army Depot, is soliciting five DIT MCO wire harness testing units under solicitation number W911KF26QA044, with the procurement set aside exclusively for DIT-MCO International of Kansas City, Missouri. The North American Industry Classification System code for this requirement is 334419, and all proposals must be submitted electronically through the Procurement Integrated Enterprise Environment (PIEE) Solicitation Module; paper submissions and email responses are not permitted. Offerors are required to ensure their complete proposals are successfully received by the deadline of 10:00 AM CST on Wednesday, 5 August 2026, and are responsible for verifying delivery and compliance with all submission protocols outlined in the PIEE system documentation. Any questions regarding the solicitation must be submitted in writing via email to Crystal Hodges no later than Thursday, 30 July 2026, at 10:00 AM CST. The solicitation and all related amendments are issued and distributed electronically only via the SAM.gov website, and it is the offeror's sole responsibility to monitor this site regularly for updates, as failure to review and respond to amendments may result in proposal rejection. The point of contact for inquiries is Crystal Hodges, with alternate support available from Heather Robinson, and the place of performance is located at Anniston Army Depot, Alabama.
Other Electronic Component Manufacturing

POSTED

about 9 hours ago

DEADLINE

in 9 days
View Details
NAICS: 541330
New
Federal
Configuration Management & Quality Assurance ServicesThe contract requires the provision of Configuration Management and quality assurance services to maintain technical data integrity, ensure complete part traceability, and uphold compliance with AS9100 and MIL-STD-31000 standards throughout sustainment operations. These services are critical to supporting the Department of Defense’s ongoing maintenance and logistics efforts, with performance centered in the 36201 zip code area. The work is structured as a subcontract under NAICS code 541330, targeting specialized engineering and technical consulting services aligned with defense aviation and systems sustainment requirements. All activities must demonstrate rigorous adherence to industry-standard quality protocols to prevent discrepancies, ensure consistency in documentation, and support audit readiness across the product lifecycle. Bids are due by August 10, 2026, at 10:00 PM, following a solicitation posted on July 22, 2026. There is no set-aside classification specified, and while the specific contracting office address details are not provided, the agency responsible is W6QK Acc Anad under the Department of Defense. The contract does not designate a point of contact publicly, and full details can be accessed through the official SAM.gov portal. Successful bidders will be expected to deliver consistent, auditable CM processes that safeguard technical accuracy, enable efficient parts replacement and repair, and uphold strict defense quality regulations without deviation.
Engineering Services

POSTED

5 days ago

DEADLINE

in 14 days
View Details
NAICS: 811310
New
Federal
Depot-Level Overhaul & Recapitalization ServicesThe contract requires performance of depot-level overhaul, testing, inspection, and sustainment services for legacy ground combat vehicles, artillery systems, and Department of Defense locomotives, with work to be conducted primarily at Anniston Army Depot in Alabama, zip code 36201, or at remote temporary duty locations as needed. The scope encompasses comprehensive recapitalization efforts to restore and maintain operational readiness of aging military equipment critical to land-based combat and logistics operations. All work must meet stringent DoD technical and quality standards to ensure safety, reliability, and extended service life of the systems involved. The solicitation is structured as a subcontract under the North American Industry Classification System code 811310, which pertains to repair and maintenance of industrial and commercial machinery and equipment. The opportunity was posted on July 22, 2026, with a firm deadline for response set for August 10, 2026, at 10:00 PM Eastern Time. The awarding agency is the Department of Defense, specifically under the office identifier W6QK Acc Anad, indicating procurement activity managed through the Army’s logistics and sustainment command structure. The contract is likely intended to support the continued operational deployment of legacy platforms as modernization programs are phased in.
Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

5 days ago

DEADLINE

in 14 days
View Details
NAICS: 423830
New
Federal
Agile Sourcing of Class 4 & Class 9 Obsolete ComponentsThe contract calls for the rapid sourcing, testing, packaging, and delivery of obsolete Class 4 electronics and Class 9 components impacted by Diminishing Manufacturing Sources and Material Shortages, with all deliveries required to be completed within three calendar days of request. This subcontract is focused exclusively on addressing urgent supply chain gaps for critical defense-related components, ensuring operational continuity for systems relying on aging or discontinued parts. Failure to meet the three-day delivery window may result in non-compliance, and the work must be performed at the specified location with a zip code of 36201. The solicitation was posted on July 22, 2026, with responses due by August 10, 2026, and falls under NAICS code 423830, which covers wholesale trade of electronic parts and equipment. The contracting agency is the Department of Defense through its office W6QK Acc Anad, indicating this effort supports military systems and readiness. While no set-aside designation is provided, the nature of the work demands a highly responsive supplier with existing infrastructure for sourcing hard-to-find electronic components, rigorous testing protocols, and secure packaging capabilities to meet defense standards.
Industrial Machinery and Equipment Merchant Wholesalers

POSTED

5 days ago

DEADLINE

in 14 days
View Details
NAICS: 332999
New
Federal
Advanced Manufacturing & 3D Printing of Legacy PartsThe contract seeks qualified subcontractors to produce replacement parts for legacy military systems using advanced manufacturing techniques, primarily additive manufacturing such as 3D printing, when traditional supply chains are no longer viable. The work is focused on ensuring operational readiness by enabling the rapid fabrication of critical components that are otherwise unavailable through conventional sourcing, with an emphasis on meeting exacting military specifications for performance, durability, and compatibility. The place of performance is designated as 36201, indicating that production activities must occur within or be coordinated through that geographic area. The contract is classified as a subcontract under NAICS code 332999, which covers other miscellaneous fabricated metal product manufacturing, and is issued by the Department of Defense through W6QK Acc Anad. The solicitation was posted on July 22, 2026, with a firm response deadline of August 10, 2026, requiring proposers to demonstrate proven capability in additive manufacturing for defense applications, supply chain resilience expertise, and quality assurance processes aligned with military standards. There is no specified set-aside classification, meaning the opportunity is open to all eligible businesses, and interested parties must submit proposals through the SAM.gov portal prior to the deadline.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

5 days ago

DEADLINE

in 14 days
View Details
NAICS: 541330
New
Federal
Area of Interest (AoI) – Lifecycle Sustainment, Advanced Engineering, and Multi-Class Parts Sourcing Support Services (CSO-W911KF25SC002)This contract under the ACC-ANAD Organic Industrial Base Modernization Commercial Solutions Opening establishes an Area of Interest to procure agile, commercial-based solutions for the sustainment of legacy U.S. Army ground combat vehicles, locomotives, and artillery systems. The effort centers on lifecycle support, advanced engineering, and rapid sourcing of Class 4 and Class 9 components—particularly those affected by diminishing manufacturing sources and material shortages—to prevent depot production delays and maintain operational readiness. Contractors must demonstrate proven capabilities in reverse engineering obsolete parts to produce fully qualified, non-proprietary Level 3 Technical Data Packages and employ advanced manufacturing techniques such as additive manufacturing to recreate unavailable components. Performance is centered at Anniston Army Depot, Alabama, with inspections and work conducted both at depot and remote TDY locations. The vehicle requires compliance with AS9100 quality standards, strict Configuration Management procedures, and integration into the Government’s Payment Invoicing and Evaluation Engine for all invoicing and payment processing. Evaluation is based on a Best Value trade-off approach, not Lowest Price Technically Acceptable, and focuses on four key technical factors: integrated sustainment strategy, DMSMS mitigation and parts-sourcing agility, reverse engineering and advanced manufacturing maturity, and specialized capabilities for maintaining DoD locomotives and non-tactical generators. Proposals are assessed as Acceptable or Unacceptable on technical merit and Fair and Reasonable or Not Fair and Reasonable on price, with no numerical weights assigned. Offerors must maintain a current Unique Entity ID and active SAM.gov registration but are not required to self-certify socioeconomic status during initial submission. Proprietary information must be clearly marked and will be protected under FOIA for five years; submissions cannot be marked confidential. The Commercial Solution Proposal must be split into separate Technical and Price volumes, with Phase 1 Solution Briefs limited to five pages or fifteen slides. All proposals must be submitted electronically by the August 10, 2026 deadline, and no work may commence without a written directive from the Contracting Officer. The Government retains authority to award to any, some, or none of the respondents, and while no contract value is specified, performance periods are intended to be short-term, typically not exceeding twelve months.
Engineering Services

POSTED

5 days ago

DEADLINE

in 14 days
View Details
NAICS: 811210
Federal
Pad Mount Transformer and Voltage Regulator Inspection and RepairAnniston Army Depot is soliciting proposals for the inspection and repair of single-phase and three-phase pad-mount transformers and voltage regulators as detailed in section 14.0 of the statement of work, with the solicitation number W911KF26QA043. This is a total small business set-aside under the NAICS code 811210, restricting eligibility to small businesses as defined by the SBA. The opportunity was posted on July 20, 2026, and all questions must be submitted in writing by 11:00 AM CDT on July 23, 2026, to the primary point of contact. Proposals are due by 3:00 PM CDT on July 30, 2026, and performance will be located at the Anniston Army Depot in Alabama, zip code 36201. The primary point of contact is Katherine Fuller, reachable by phone or email, with Heather Glover serving as the secondary contact. The opportunity is listed through the SAM.gov platform and is managed by the Department of Defense through the W6QK Acc Anad office.
Electronic and Precision Equipment Repair and Maintenance

POSTED

7 days ago

DEADLINE

in 3 days
View Details
Federal
Low Level CranesThe contract titled Low Level Cranes is a presolicitation issued by the Department of Defense through the office W6QK Acc Anad located in Anniston, Alabama, with azipcode of 36201-4199. It was posted on July 17, 2026, and responses are due by August 1, 2026, at 4:00 PM Eastern Time. The solicitation number is W911KF26QA046, and no specific setaside or NAICS code has been designated at this stage. The place of performance has not been specified, leaving flexibility for the eventual contractor to determine operational logistics based on requirements. The primary point of contact is Zena Johnson, reachable via email at zena.s.johnson.civ@army.mil or phone at 520-669-6059, with Heather P. Robinson serving as the secondary contact at heather.p.robinson.civ@army.mil or 571-588-0969. Interested parties are directed to the official SAM.gov webpage for further details and procurement updates.

POSTED

10 days ago

DEADLINE

in 5 days
View Details
NAICS: 488999
Federal
Travel and On-Site Logistics Support
All Other Support Activities for Transportation

POSTED

11 days ago

DEADLINE

in 3 days
View Details
NAICS: 541611
Federal
Technical Documentation and Compliance Reporting
Administrative Management and General Management Consulting Services

POSTED

11 days ago

DEADLINE

in 3 days
View Details
NAICS: 811211
Federal
Emergency Repairs for AF36 System
Consumer Electronics Repair and Maintenance

POSTED

11 days ago

DEADLINE

in 3 days
View Details
NAICS: 541380
Federal
AF36 Measurement System Calibration Services
Testing Laboratories and Services

POSTED

11 days ago

DEADLINE

in 3 days
View Details