Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

This Government Contract opportunity from Department Of Defense was posted on November 18, 2020. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

EXU-1 Vertical Wind Tunnel Course

Closed
N0017421Q0007Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 611699
New
International
Advanced Homemade Explosives Training
Solicitation # W8486-260448/A
The Department of National Defence is seeking proposals under solicitation W8486-260448/A to establish a five-year contract for Advanced Homemade Explosives (HME) Training. This requirement is for the provision of HME level III courses on an as-and-when-required basis, with each course lasting between 8 and 16 days for groups of 6 to 15 students. The successful contractor must provide a suitable facility within Canada or the contiguous United States that includes both a training area and an explosive range for the disposal of mixtures. Key deliverables include the provision of comprehensive course manuals, student certificates of completion, official course reports using form CF 377, and detailed Standard Operating Procedures for laboratory safety. The contract will be awarded based on a weighted evaluation of 60 percent technical merit and 40 percent price. Technical evaluation focuses heavily on instructor experience, specifically with the Canadian Armed Forces and other foreign military or law enforcement agencies. To ensure safety and quality, the contractor must provide a specialized team consisting of a chemist, qualified instructors, and on-site advanced medical care professionals, maintaining a strict student-to-instructor ratio of 2:1 during hazardous activities. Bidders must submit their proposals in three separate PDF volumes covering technical, financial, and certification requirements to the contracting authority by October 14, 2026.
Department of National Defence

POSTED

1 day ago

DEADLINE

in 1 day
NAICS: 611699
New
Federal
MARSOC Special Operations Medical Training Services IDIQ
Solicitation # H9225726RE036
The Marine Forces Special Operations Command (MARSOC) is soliciting proposals for a Single Award Indefinite-Delivery/Indefinite-Quantity (IDIQ) contract for Special Operations Medical Training Services (SOMTS). This procurement is 100% set aside for small businesses under NAICS 611699. The contract requires turnkey, complex medical training, including clinical instruction on advanced life support, mechanical ventilation, ultrasound, and airway support. The scope encompasses the management of specialized environments such as live cadaveric labs and tactical off-road driving tracks, as well as comprehensive logistics including training facilities, materials, lodging, and catering. The contract features a base period from November 3, 2026, to November 2, 2027, with four subsequent option periods, extending the total performance through April 2, 2032. It has an estimated maximum overall ceiling of $4,950,000, with annual not-to-exceed ceilings of $900,000 for the first four years and $450,000 for the final period. Task orders will be issued as Firm-Fixed-Price (FFP) for three primary categories: Prolonged Field Care (PFC), Special Operations Austere Medical Training (SO+AMT), and Custom Medical Training. Proposals are due by November 13, 2026, and must be submitted in four distinct volumes covering qualifying criteria, technical approach, past performance, and price. The government will use a competitive best-value tradeoff methodology with a three-phase sequential evaluation: a pass/fail gate for qualifying criteria, a technical evaluation, and a final review of past performance and price. Key requirements include strict adherence to cybersecurity standards such as NIST SP 800-171 and DFARS 252.204-7012, the submission of a CUI safeguarding plan, and the provision of medical liability insurance for all staff and role-players.
Marsoc H92257

POSTED

2 days ago

DEADLINE

in 16 days
NAICS: 611699
New
SLED
Expanding Capacity of Maryland Accredited Community Health Worker Certification Training Programs to Recruit and Train Maryland CHWs
Solicitation # BPM059395
The Maryland Department of Health's Office of Population Health Improvement is issuing solicitation BPM059395 to expand the number of trained and certified Community Health Workers (CHWs) in Maryland. This firm fixed price grant is available to MDH-accredited training programs that are either local or state government agencies, public colleges, state universities, or 501(c)(3) nonprofit social organizations. Awardees must maintain an operational office within Maryland and are required to recruit and train at least five Maryland-based CHWs per organization at no cost to the students. Grant funds may also be used to provide essential supplies, such as textbooks and loaner laptops, to remove barriers to program completion. The anticipated period of performance is approximately eight months, running from December 1, 2026, to July 30, 2027. Applications must be submitted via eMMA by November 11, 2026, and divided into two volumes: a Project Narrative and a Budget Justification. Evaluation is based on a weighted balance of technical factors—including the applicant's understanding of the scope of work, organizational ability, staffing qualifications, and stakeholder engagement—and financial factors. Compliance requirements include adherence to the Community Health Worker Act, COMAR regulations, the Americans with Disabilities Act, and various federal non-discrimination laws. Selected grantees will be required to provide a detailed work plan, participate in monthly progress updates, and follow specific invoicing procedures submitted to the Grant Monitor.
Office of Population and Health Improvement

POSTED

7 days ago

DEADLINE

in 15 days

General Info

NAICS

611699 - All Other Miscellaneous Schools and Instruction

Place of Performance

Virginia Beach, VA, 23451-3270, USA

Set-Aside

NONE

Documents

1

NOTICE+OF+INTENT+TO+SOLE+SOURCE++++EXU-1+Vertical+Wind+Tunnel+Training+Course.docx

DOCX

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseClosed
Posted

special-notice

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Nswc Indian Head Division
Contacts1 person available
OfficeINDIAN HEAD, MD, 20640-1533, USA
Office AddressINDIAN HEAD, MD, 20640-1533, USA
Contacts

Full Description

Show more
NOTICE OF INTENT TO SOLE SOURCE: RFQ # N0017421Q0007 Naval Surface Warfare Center Indian Head Explosive Ordnance Disposal Technology Division (NSWC IHEODTD) intends to award a firm fixed-price sole source procurement with Indoor Skydiving Virginia, 2412 Pacific Ave, Virginia Beach, Va 23451-3270 to provide: STATEMENT OF WORK For Expeditionary Exploitation Unit-One (EXU-1) Specialized Training Vertical Wind Tunnel Training 18 September 2020 1. SUMMARY: This Statement of Work (SOW) defines a Vertical Wind Tunnel training event for the Naval Surface Warfare Center-Indian Head Expeditionary Exploitation Unit-ONE (EXU-1) military parachutist's personnel. 2. BACKGROUND: EXU-1, Air Operations (P3) requires that Military Free Fall (MFF) qualified personnel, as a part of their military duty, must maintain qualification to receive hazardous duty incentive pay. This course is required to maintain proficiency in these qualifications. A local training site is required to limit the interference with the established Explosive Exploitation training schedule to ensure parachutist's personnel are fully qualified and certified. Explosive Exploitation training schedule is a compressed cycle that ensures EXU-1 can meet it global operations with its available assigned personnel. 3. SCOPE OF WORK: The Contractor shall provide a course curriculum and instruction for students to participate in a vertical wind tunnel training for EXU-1 military parachutist's personnel. The Contractor shall provide all necessary equipment, materials, and training site to support this course of instruction. EXU-1 military parachutist's personnel will provide all personal protective equipment (PPE) and military equipment needed to perform vertical wind tunnel procedures. The Government will provide all necessary transportation for the students to and from training locations. 4. REQUIREMENTS: The training curriculum shall be designed to support up to 40 hours of coached VWT wind tunnel rental hours to be used over the period of 10 months. The Contractor shall conduct training during the dates of 2 December 2020 to 30 September 2021 timeframe when EXU-1 personnel are available for training. The Contractor shall provide both classroom and practical training at the Contractor's training site that provides a focus in the following freefall objectives. 4.1 The contractor shall provide a secure area for military personnel to conduct wind tunnel training and instruction. Facility will be sufficient in size to accommodate multiple personnel performing relative work (RW) training. The contractor shall provide a clean, effective facility for the conduct of vertical wind tunnel training. Military personnel will require access to classroom spaces for debriefing purposes. Specific requirements are as follows: 4.1.1 The contractor shall provide a total of forty (40) hours of vertical wind tunnel rental hours over a 10 month period. Which is further defined as: - Forty (40) IBFA Level 4 coached VWT hours 4.1.2 The facility shall meet or exceed 14 feet in diameter and contain a climate controlled recirculating flight chamber. 4.1.2.1 Accommodate four (4) students at one time. 4.1.2.2 Provide a wind tunnel that incorporates a make-up air system, allowing the antechamber to remain open while the tunnel still runs. 4.1.3 Facility wind speed will be sufficient to lift a parachutist wearing tunnel-safe parachutes and equipment bags (approximately 400lbs). 4.1.4 The Contractor shall provide classroom facilities to accommodate thirty (30) students. 4.1.4.1 Classroom facilities shall be equipped with a large, high definition screen for viewing and assessment of training videos. 4.1.5 The Contractor shall ensure each student MFF VWT Safe Rigs are checked prior to entering the VWT. 4.1.6 Video Recording and Playback 4.1.6.1 The Contractor shall provide equipment and personnel necessary to perform video recording and playback capabilities of all VWT training events. 4.1.6.2 The Contractor shall provide the capability for recording and playback to occur concurrently. 4.1.6.3 A large, high definition viewing area/screen shall be provided in order to adequately assess student performance. This equipment should be located in the classroom. 4.1.7 Scheduling and Access 4.1.7.1 Tentative training schedules will be discussed between the Unit Point of Contact and the Contractor after contract award. 4.1.7.2 Schedule changes will be made NLT 10 days prior to the start of each training event. All changes will be coordinated through the Unit Point of Contact (POC) and the Contractor. 4.1.7.3 The contractor shall provide access to the training facility from 0600 until 1900, Monday-Friday, excluding holidays. 4.1.7.4 User will coordinate with the contractor for access outside of the normal scheduled hours, if required. 4.1.8 When performing work associated with this SOW, the Contractor shall make clear to all individuals that they are Contractor employees and not DOD personnel when working in any situation where their contractor status is not obvious to third parties. 5. PERFORMANCE PERIOD: The period of performance requested is 2 December 2020 to 30 September 2021 6. GOVERNMENT FURNISHED MATERIAL: Military specific equipment utilized during military free fall operations (NODS, ballistic helmets, military parachute packs, ruck sacks, and weapons) will be provided by the EXU-1 unit personnel and will remain in their possession throughout the training. 7. USE OF GOVERNMENT FACILITY: No Government Facility will be used for this training effort. 8. SECURITY: No Security requirements are required for this effort. 9. SAFETY: The Contractor shall promptly report to the Unit POC and the procuring Contracting Officer (PCO) if a mishap involving services under this contract results in an injury. If the U.S. Navy conducts an investigation of the accident, the Contractor (including all Sub-Contractors) shall cooperate with the government personnel until the investigation is completed. The Contractor shall allow authorized government representatives access to the Contractor's facilities, personnel, and safety program documentation. ACRONYMS AMC - Air Mobility Command CNO - Chief of Naval Operations COR - Contracting Officer Representative CSG/ESG - Carrier Strike Groups/Expeditionary Strike Groups DOD - Department of Defense DON - Department of Navy DZ - Drop Zone EOD - Explosive Ordnance Disposal EODTEU - Explosive Ordnance Disposal Training and Evaluation Unit FAR - Federal Aviation Regulation GFE - Government Furnished Equipment GFF - Government Furnished Facilities GFI - Government Furnished Information HALO/HAHO - High Altitude Low Opening/ High Altitude High Opening JTR - Joint Travel Regulations KO - Contracting Officer MCM - Mine Countermeasure MFF - Military Free Fall MSC - Military Sealift Command MSL - Mean Sea Level OFRP - Optimized Fleet Response Plan P3 - Premeditated Personnel Parachuting PMT - Pre-mission Training POP - Period of Performance PWS - Performance Work Statement SOFBIS - Special Operation Forces Baseline Interoperable Standards SME - Subject Matter Expert TA - Technical Assistant TPOC - Technical Point of Contact USPA - United States Parachute Association VWT - Vertical Wind Tunnel ZAR - Zone Availability Report LEADTIME: Leadtime for completion of testing is on or before 56 days after the date the contract is awarded. The associated North American Industry Classification System (NAICS) code is 611699, Interested vendors must be registered in the System for Award Management (SAM) at https://www.sam.gov/portal/public/SAM/. The circumstances permitting Other Than Full and Open Competition is Federal Acquisition Regulation (FAR) 6.302-1, "Only one responsible source and no other supplies or services will satisfy Agency requirements." The intent of this synopsis is to determine if any sources exist, and therefore, no Request for Quote (RFQ) is available. This notice of intent is not a request for competitive quotes; however, all information received by 23 Nov 2020 will be considered by the Government for the next requirement. If quotes are received for this requirement, it will be considered in for the next requirement. Clauses: 52.204-2; 52.204-3; 52.204-7; 52.204-24; 52.204-25; 52.204-26; 52.204-26; 52.204-13; 52.204-19; 52.204-19; 52.209-10; 52.211-17; 52.213-4; 52.212-4; 52.219-1; 52.219-28; 52.222-19; 52.222-21; 52.222-26; 52.222-50; 52.223-18; 52.225-13; 52.225-18; 52.232-1; 52.232-8; 52.232-39; 52.232-40; 52.233-1; 52.233-3; 52.233-4; 52.243-1; 52.241-1; 52.252-1; 52.252-2; 252.203-7000; 252.203-7002; 252.203-7005; 252.204-7003; 252.204-7008; 252.204-7009; 252.204-7012; 252.204-7015; 252.225-7001; 252.225-7018; 252.232-7003; 252.232-7010; 252.243-7001; 252.244-7000; 252.247-7023

More opportunities from Department Of Defense → Nswc Indian Head Division

Same awarding agency

NAICS: 332710
Federal
Body, Retainer, and Gasket
Solicitation # N0017426Q1120
The Naval Surface Warfare Center Indian Head Division (NSWC IHD) is soliciting quotes under RFQ N0017426Q1120 for the fabrication, inspection, and delivery of Aviation Critical Safety Items (ACSIs), specifically Delay Bodies, Ignition Device Retainers, and Aluminum Gaskets. This is a total small business set-aside under NAICS code 332710, intended to be awarded as a firm-fixed-price purchase order. The government will utilize a Lowest Price Technically Acceptable (LPTA) basis for award, evaluating quotes based on technical adherence to specifications and total price, including shipping and handling. All deliverables must be delivered FOB Destination to Indian Head, Maryland, with an overall delivery deadline of April 30, 2027. Prospective contractors must meet stringent technical and security requirements. ITAR certification is required to receive technical drawings, which must be requested by October 23, 2026. A critical requirement for technical acceptability is the verification of a current CMMC Level 2 status (Conditional or Final) recorded in the Supplier Performance Risk System (SPRS). Additionally, the contractor must maintain a quality management system adhering to ASQ/ANSI/ISO 9001:2015 and submit an Inspection Test Plan and First Article Testing (FAT) samples where applicable. Quote packages, including the company name, point of contact, UEI, and CAGE code, must be submitted via email by November 6, 2026, at 10:00 AM EST.
Machine Shops

POSTED

20 days ago

DEADLINE

in 8 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS