Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Reissue 2 of Solicitation of Offers - F7049-250210 – CCGS Gordon Reid – Rescue Boat Davit

Active
WS5554494294International

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Canadian Coast Guard under the Department of National Defence is seeking bids for a rescue boat davit system to be installed on the CCGS Gordon Reid, reissuing a previous solicitation that was canceled and replaced. This new solicitation, identified as WS5554494294, was posted on June 19, 2026, with a mandatory response deadline of 2:00 PM Pacific Time on the same day, superseding the prior offer dated April 1, 2026, which had a closing date of May 7, 2026. The procurement falls under NAICS code 336612, indicating it relates to ship and boat building and repairing, and is classified as a federal government procurement managed by the Department of Public Works and Government Services on behalf of the Government of Canada. The device must be suitable for deployment on a vessel operating in British Columbia, with all performance and delivery obligations centered in that region. The contract is open to qualified suppliers responding to the reissued solicitation, with no specific set-aside provisions indicated. All inquiries and communications must be directed to Torrey Buchan, the primary point of contact, via the official email address provided by Public Services and Procurement Canada. Proposals must be submitted through the designated portal at the provided UI link, and failure to meet the deadline will result in disqualification. The requirement emphasizes technical suitability, safety compliance, and operational reliability for maritime rescue operations in challenging coastal environments.

General Info

Canadian Coast Guard seeks rescue boat davit proposals for CCGS Gordon Reid, deadline June 19, 2026.

Agency

Government of Canada → Department of Public Works and Government ServicesView Agency

NAICS

336612 - Boat BuildingView NAICS

Place of Performance

British Columbia, CAN

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

2 updates
PhaseSolicitation
Posted

Solicitation

Amendment 1

Contract was updated

Amendment 2

Contract was updated

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyGovernment of Canada → Department of Public Works and Government Services
Contacts1 person available
OfficeN/A
Organization / Agency
Government of Canada → Department of Public Works and Government Services
View Agency Profile
Office AddressN/A
Contacts
Buchan Torrey (SPAC/PSPC) (il-lui / he-himContracting Authority

Full Description

Show more
The Canadian Coast Guard – Department of National Defence has a requirement for a rescue boat davit to be used onboard the CCGS Gordon Reid. This solicitation of offers cancels and supersedes previous solicitation of offers number Doc5692242310 dated June 3, 2026 with a closing of June 19, 2026 at 11:00AM Pacific time.

Similar Contracts

Same NAICS industry code

NAICS: 336612
New
Federal
CONNECTOR,THRU-HULLThis contract pertains to the procurement of a thru-hull connector assembly designated as SPECIAL EMPHASIS MATERIAL (Level I), critical to the safe operation of shipboard systems where failure could result in catastrophic loss of life, vessel, or mission. The item must comply with specification CPG 1025 and associated drawings, with strict requirements for material composition, welding, inspections, and traceability. All critical components—including the penetrator body, cover, nut, and washers—must be manufactured from QQ-N-286 or QQ-N-281 material with full quantitative chemical and mechanical certification, and each lot must be traceable via unique heat or lot numbers permanently marked on the part or an attached durable tag. Welding procedures and qualifications must be submitted for pre-approval prior to any production or repair welding, and all welds must conform to S9074-AQ-GIB-010/248 or 0900-LP-001-7000. Material certifications must be submitted electronically via WAWF to Portsmouth Naval Shipyard (N50286) for review and acceptance prior to shipment, with no material permitted to leave the contractor’s facility without formal acceptance. The contractor is required to maintain a documented quality system compliant with ISO-9001 and ISO-10012 or MIL-I-45208 and MIL-STD-45662, subject to government source inspection by DCMA. First Article Testing of one unit must be conducted at Portsmouth Naval Shipyard under government supervision, and all non-destructive and destructive tests, including ultrasonic inspection, dye penetrant testing, and hardness verification, must be performed per specified standards and documented with full traceability to the tested component. Electronic signatures on certifications are permitted but must be controlled, uniquely attributed, and tamper-evident. No molybdenum disulfide lubricants are allowed; only A-A-59004 anti-galling compound may be used on threads. The contract mandates 100% inspection of certification data and traceability markings, zero-defect acceptance criteria, and full compliance with Buy American and Small Business Subcontracting requirements. Delivery of all materials is due no later than 365 days after contract award, with certification data for weld procedures and material testing due 20 days prior to each shipment. This solicitation is issued under Emergency Acquisition Flexibilities and carries a “DO”
Navsup Weapon Systems Support Mech

POSTED

3 days ago

DEADLINE

in 29 days
View Details
NAICS: 336612
New
Federal
UNION ASSEMBLYThis contract governs the supply of a specialized 0.500 IPS Socketweld Union Assembly designated as SPECIAL EMPHASIS material (Level I/SUBSAFE), critical to shipboard systems where failure could result in catastrophic consequences including loss of life or vessel. The material must strictly conform to Drawing 845-2445110 and referenced specifications including QQ-N-281, MIL-C-15726, and MIL-C-24679, with mandatory quantitative chemical and mechanical certification for specific components. All items require full traceability from raw material through final assembly, with unique heat-lot markings permanently applied and verifiable against certified test reports. Certification documentation must be submitted via WAWF to Portsmouth Naval Shipyard under DODAAC N50286, with inspection and acceptance handled by N39040, and shipments are prohibited until formal acceptance is received. Welding, brazing, and non-destructive testing procedures must be pre-approved, with detailed qualification data submitted electronically, and filler metals require certificates verifying composition and compliance. The contractor must maintain an ISO-9001 compliant quality system with ISO-10012 and ISO/IEC 17025 calibration controls, subject to government quality assurance at source, including unannounced audits and inspections by DCMA. All subcontractors are bound by the same stringent requirements, and material handling, storage, and transport must prevent commingling, contamination, or loss of traceability. Mercury and molybdenum disulfide are prohibited, while anti-galling compound A-A-59004 is mandated for threads. Final acceptance requires 100% verification of traceability, certifications, and test results, with zero-tolerance defects for lot acceptance. The contract is issued under Emergency Acquisition Flexibilities and is a DO-rated order under DPAS, prioritized for national defense use. All waivers, deviations, and engineering changes require explicit Government approval, and full compliance with NAVSEA and Navy quality directives is mandatory. The delivery window is capped at 365 days post-contract effective date, with certification data submissions due at least 20 days before each delivery.
Navsup Weapon Systems Support Mech

POSTED

3 days ago

DEADLINE

in 22 days
View Details
NAICS: 336612
New
SLED
Pedal Boat Manufacturing – Animal-Themed Recreational WatercraftThe contract involves the manufacture of five-person animal-themed pedal boats designed for recreational use on water, with specifications requiring marine-grade fiberglass construction, UV-resistant gel coat finishes, non-skid surfaces for safety, and self-draining hulls to ensure durability and ease of maintenance. Each vessel must be equipped with either a foot-pedal or hand-crank propulsion system to accommodate varying user preferences and accessibility needs, blending functionality with playful, thematic designs. The work falls under NAICS code 336612, indicating classification within the manufacturing of other recreational vehicles, and is structured as a subcontract opportunity issued by the City of Raleigh under the North Carolina state framework. The solicitation was posted on July 24, 2026, with a firm deadline for responses on August 20, 2026, at 7:00 PM Eastern Time. While no set-aside provisions or specific agency contact details are provided, the project underscores a municipal initiative to enhance public recreational offerings with innovative, durable, and user-friendly watercraft. The absence of a defined place of performance suggests flexibility in manufacturing location, though adherence to the technical specifications and delivery standards will be critical for compliance. Interested parties must ensure their proposals meet all engineering, safety, and aesthetic requirements outlined in the solicitation to be considered for award.
City of Raleigh

POSTED

3 days ago

DEADLINE

in 25 days
View Details

More opportunities from Government of Canada → Department of Public Works and Government Services

Same awarding agency