Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Façade Glazing Installation

Active

International

Response Deadline08/13/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract calls for the installation of a comprehensive range of glass systems for a façade project, including light and heat-reflecting glass, wired safety glass, laminated glass, and patterned glass. The scope requires the preparation of detailed shop drawings and the construction of physical mock-ups to ensure design accuracy and performance approval prior to full-scale installation. All work must adhere strictly to applicable glazing standards to guarantee structural integrity, safety, and energy efficiency. The project is positioned as a subcontract under the National Research Council of Canada, representing the Government of Canada, with performance required across Quebec, excluding the National Capital Region. The solicitation was posted on July 13, 2026, and responses must be submitted by August 13, 2026, at 7:00 PM Eastern Time. The NAICS code 238910 classifies this as a special trade contractor task related to building finishing work, specifically indicating expertise in glass and glazing installation is essential. Bidders must be prepared to demonstrate technical capability, compliance with regulatory glazing codes, and experience with high-performance façade systems. There is no set-aside designation specified, meaning the opportunity is open to all eligible contractors regardless of business size or ownership profile.

General Info

Install glass systems for façade project in Quebec under Government of Canada contract, meet glazing standards, submit bid by August 13, 2026.

Agency

Government of Canada → National Research Council of CanadaView Agency

NAICS

238910 - Site Preparation ContractorsView NAICS

Place of Performance

Canada, Quebec (except NCR), CAN

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 13

subcontract

Response DeadlineAug 13

Submission deadline

Response Deadline

08/13/2026, 07:00:00 PM UTCin 23 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyGovernment of Canada → National Research Council of Canada

ContactsNo contacts available

OfficeN/A

Organization / Agency

Government of Canada → National Research Council of Canada

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Installation of glass systems including light/heat-reflecting, wired safety, laminated, and patterned glass. Includes shop drawings, mock-ups, and compliance with glazing standards.

Similar Contracts

Same NAICS industry code

IFB 05A3033 Demolition and Clearance Service in San Luis Obispo CountyThe contract solicitation 05A3033 issued by the California Department of Transportation (Caltrans) seeks bids for demolition and clearance services within San Luis Obispo County, requiring the contractor to provide all labor, tools, equipment, materials, permits, traffic control, travel, and incidentals necessary to perform complete site clearance, including hazardous material abatement such as asbestos and lead-based paint, removal of structures and debris, and proper disposal of contaminated soil and waste in accordance with state and local regulations. Work must comply with specific environmental mandates, including Senate Bill 1383 and Title 14 California Code of Regulations, and require the implementation and documentation of Health and Safety Plans and Stormwater Pollution Prevention Plans. The contract is structured as a fixed-price arrangement with a maximum bid ceiling of $484,000, and performance is expected to occur between September 1, 2026, and August 31, 2027, with all services rendered on-site in San Luis Obispo. Bids must be submitted in hard copy by August 6, 2026, at 2:00 p.m. Pacific Time to Caltrans’ procurement office in Sacramento, and electronic submissions are strictly prohibited. Contractors must hold specific certifications including asbestos and hazardous substance removal licenses, qualified SWPPP developer and practitioner credentials, appropriate California contractor classifications, hazardous waste transporter registrations, and federal and state hazardous materials transportation permits. Financial and legal obligations include a $1 million per incident insurance policy with Caltrans named as additional insured, a payment bond for contracts over $25,000, compliance with prevailing wage laws, apprenticeship ratios, and proof of non-debarment. Bidders must declare size status as small business, microbusiness, or other than small, and may claim participation as a Disabled Veteran Business Enterprise with supporting documentation. Affirmative disclosures trigger additional reporting requirements, including quarterly utilization reports and subcontracting commitments. The contract mandates submission of completed forms including the Bidder Declaration, Contractor Certification Clauses, and Bid/Bidder Certification Sheet, with no alterations permitted to Caltrans standard language. Invoicing is paper-based, requiring triplicate copies with detailed supporting receipts, and payments are subject to state and federal appropriation availability. Inspections and acceptance are performed by Caltrans at project sites, governed by standardized environmental testing protocols including EPA methods for metals, VOCs, and asbestos analysis, with results interpreted using prescribed qualifiers. Failure to meet any requirement may

California Department of Transportation

POSTED

DEADLINE

Vegetation Management – Tree Trimming and Brush RemovalThe contract involves vegetation management services for tree trimming and brush removal along FM1252 in Gregg County, Texas, requiring the cutting, clearing, and removal of overgrown vegetation within the roadway limits to ensure safety and visibility. The work must be completed within a strict 28-working-day timeframe, emphasizing efficiency and timely execution. This subcontract is issued by the Texas Department of Transportation under NAICS code 238910, which classifies it as other heavy and civil engineering construction. The solicitation was posted on July 20, 2026, with responses due by August 11, 2026, at 4:00 PM, and all work is to be performed at the specified location in Gregg County.

Texas Department of Transportation

POSTED

DEADLINE

Traffic Control and Safety Zone ManagementThe contract requires the provision of temporary traffic control services to ensure safety during crack sealing operations on active highway segments. This includes deploying signage, cones, barriers, and flagging personnel to manage traffic flow and protect workers and motorists throughout the duration of the work. The scope focuses exclusively on safety zone management for road maintenance activities, with all equipment and personnel required to meet applicable state and federal standards for highway work zones. Issued by the Texas Department of Transportation, this subcontract is classified under NAICS code 238910 for other heavy and civil engineering construction and is open for response until August 11, 2026. The work will be performed on state highways within Texas and is posted on the Texas SmartBuy procurement portal. Bidders must be prepared to mobilize quickly, operate in high-traffic environments, and maintain continuous compliance with safety protocols throughout the project timeline.

Texas Department of Transportation

POSTED

DEADLINE

Traffic Control and Signage for Maintenance ZonesThe contract pertains to the installation and removal of temporary traffic control devices for maintenance operations conducted on active highways under the Texas Department of Transportation. It encompasses all necessary signage, barriers, lighting, and traffic management equipment required to ensure worker and public safety during roadwork activities. The work must adhere to state and federal standards for temporary traffic control, with strict compliance expected for timing, placement, and removal procedures to minimize disruption to traffic flow. This is a subcontract opportunity with a NAICS code of 238910, indicating it relates to other heavy and civil engineering construction services. The solicitation was posted on July 20, 2026, and responses are due by August 11, 2026, at 4:00 PM. All work is to be performed within the state of Texas, though specific locations are not detailed. Interested parties must submit proposals through the Texas SmartBuy platform, and the contract is not subject to any set-aside provisions. Performance will require coordination with transportation personnel, ability to mobilize quickly, and demonstrated experience in highway maintenance zone operations.

Texas Department of Transportation

POSTED

DEADLINE

Traffic Control and Safety FlaggingThe contract requires the provision of temporary traffic control services for crack sealing operations on IH-0035E, including the deployment of necessary safety equipment such as signage, cones, arrow boards, and certified flaggers to maintain safe working conditions and ensure compliance with state and federal regulations. All personnel must be properly trained and certified to perform flagging duties, and all traffic control measures must be installed and maintained in accordance with accepted standards to minimize disruption and protect both workers and the public during highway operations. This is a subcontract under the Texas Department of Transportation, with the NAICS code 238910 indicating specialized construction activities related to highway and street traffic control. The solicitation was posted on July 20, 2026, and responses are due by August 12, 2026, at 4:00 PM. Services are to be performed along IH-0035E, though specific city and state locations are not detailed in the available data. The contract is accessible through the Texas SmartBuy portal, and while no set-aside provisions or organizational type are specified, the requirement clearly focuses on safety-driven traffic management for a state-maintained infrastructure project.

Texas Department of Transportation

POSTED

DEADLINE

Erosion Control and Site StabilizationThe contract titled Erosion Control and Site Stabilization is a subcontract issued by Midwestern State University in Texas, focused on implementing erosion control measures during and after construction activities. Key tasks include installing silt fencing to detain sediment, applying hydroseeding to establish vegetation and prevent soil loss, and performing temporary grading solutions to manage water flow and stabilize disturbed areas. The solicitation was posted on July 20, 2026, with a response deadline of August 13, 2026, and is categorized under NAICS code 238910, which corresponds to site preparation services. The place of performance is within Texas, though specific location details are not provided, and the contract does not specify a set-aside type or organizational constraints. Interested parties must respond through the designated online portal listed in the contract details.

Midwestern State University

POSTED

DEADLINE

Full-Service Demolition ContractorThe contract awards a full-service demolition contractor to completely dismantle the former Morgan County Jail, requiring safe, methodical removal of all structural components and thorough site clearance. The scope includes secure dismantling procedures, proper handling and disposal of debris, and compliance with all environmental and safety regulations throughout the project. The work must be performed in accordance with industry standards to ensure public safety and minimize impact to surrounding areas. The solicitation is issued as a subcontract under NAICS code 238910, with a response deadline of September 9, 2026, and was posted on July 20, 2026. The agency responsible is the Morgan County Board of Commissioners in Georgia, and the place of performance is within the county, though specific location details are not provided. The contract does not specify a set-aside type or point of contact, and further details can be accessed via the provided online link.

Morgan County Board of Commissioners

POSTED

DEADLINE

in about 2 months

Morgan County Former Jail Demolition and Site RestorationMorgan County is soliciting bids for the demolition of the former Morgan County Jail and subsequent site restoration under solicitation number PE-77426-NONST-2027-000000030, with a response deadline of September 9, 2026. The project is open to qualified demolition and environmental contractors who must attend a mandatory pre-bid site meeting to ensure their bids are considered responsive; this meeting is designed to gather contractor input on existing conditions, demolition sequencing, environmental concerns, and constructability to inform final specifications. Although the complete bid documents and pricing structure will be released at a later date, contractors are expected to have a clear understanding of the site's unique challenges, including potential environmental hazards and logistical constraints. The work will be performed in Morgan County, Georgia, and all proposals must be submitted by the stated deadline to be eligible for consideration. The procurement is managed by the Morgan County Board of Commissioners, with Mark Williams serving as the primary point of contact for inquiries, reachable via phone or email. While the NAICS code and set-aside details are not specified, the solicitation is classified under a state and local government entity and is published through Georgia’s official procurement portal. Bidders must remain attentive to subsequent communications regarding finalized documentation, as failure to comply with pre-bid requirements or missing deadlines will disqualify submissions. The county emphasizes thorough site evaluation and environmental compliance as critical components in selecting a contractor for this project.

Morgan County Board of Commissioners

POSTED

DEADLINE

in about 2 months

Site Preparation and EarthworkThe contract entails comprehensive site preparation and earthwork services including general site clearing, grading, excavation, and all necessary groundwork to ready the location for subsequent construction activities. Work must be performed in accordance with industry standards and specified project requirements to ensure proper foundation and layout for future development. The opportunity is structured as a subcontract with a North American Industry Classification System code of 238910, indicating it falls under site preparation and earthmoving services. The solicitation was posted on July 20, 2026, with a firm response deadline of August 25, 2026, at 3:00 PM. Work is to be conducted under the jurisdiction of Montgomery County, Pennsylvania, though specific location details and point of contact information are not provided. Interested parties must submit proposals through the designated online portal prior to the deadline to be considered for award.

Montgomery County Pa

POSTED

DEADLINE

in about 1 month

Excavation and EarthworkThe contract is for excavation and earthwork services related to the construction of a retaining wall foundation, encompassing site clearing, grading, trenching, and excavation activities along with the removal of soil and installation of temporary shoring to ensure safety and stability during construction. The work is being procured as a subcontract under the National Works Agency of the Government of Jamaica, with the North American Industry Classification System code 238910 indicating specialized construction activities in site preparation and earthmoving. The solicitation was posted on July 20, 2026, with a response deadline of August 17, 2026, at 4:00 PM, providing potential contractors with approximately four weeks to prepare and submit bids. The place of performance is not specified beyond the jurisdiction of the Government of Jamaica, and no set-aside provisions or organizational type restrictions are indicated. The contract opportunity is accessible via the Government of Jamaica’s e-procurement portal, and bidders are expected to comply with all technical and safety requirements associated with earthwork and foundation preparation for retaining structures.

National Works Agency

POSTED

DEADLINE

Concrete Repair and Deck PreservationThe contract involves performing concrete spall repair, deck patching, crack sealing, and overlays on multiple bridge structures using non-corrosive reinforcement materials to ensure long-term durability and structural integrity. All work must be completed in accordance with industry best practices and applicable transportation standards, with a focus on minimizing disruption and extending the service life of the affected infrastructure. The project requires specialized expertise in bridge preservation techniques and the use of materials that resist corrosion and environmental degradation. The contract is classified as a subcontract under NAICS code 238910 and is associated with the Massachusetts Highway agency, with all performance activities centered at Park Plaza in Boston, ZIP code 02116. Bids must be submitted by August 25, 2026, following a posting date of July 20, 2026. While the specific awardee and funding source are not detailed, the nature of the work indicates an emphasis on maintaining critical transportation assets through proactive, high-quality concrete repair and protective measures.

0H100 - HIGHWAY

POSTED

DEADLINE

in about 1 month

Excavation and Grading for Field House SiteThe contract titled Excavation and Grading for Field House Site involves comprehensive site preparation activities including clearing, grubbing, and topsoil stripping, followed by bulk earthmoving to establish proper cut and fill balance and achieve final design elevations. Work scope includes grading the site to meet specified construction requirements and implementing temporary erosion control measures to mitigate environmental impact during construction. The project is located in Boston with a ZIP code of 02108 and falls under NAICS code 238910 for site preparation services. This is a subcontract opportunity posted on July 20, 2026, with proposals due by August 13, 2026, at 5:00 PM. The contracting entity is the Public Facilities Department under the Massachusetts agency, and all work must be performed at the designated site in Boston.

PFD01 - Public Facilities Department

POSTED

DEADLINE

More opportunities from Government of Canada → National Research Council of Canada

Same awarding agency

Technical Documentation and User Interface DevelopmentThe contract titled Technical Documentation and User Interface Development seeks a subcontractor to produce comprehensive technical manuals, a graphical user interface, and fully bilingual English/French operational documentation to support user training and ongoing system maintenance. The deliverables must meet high standards of clarity and usability, ensuring that end users across Canada can effectively operate and maintain the associated systems regardless of their primary language. The work requires expertise in technical writing, software interface design, and professional translation services to maintain consistency and accuracy in both official languages. This subcontract is issued by the National Research Council of Canada under the Government of Canada, with a solicitation posted on July 20, 2026, and a response deadline of August 4, 2026. The NAICS code 541830 indicates this falls under the category of other scientific and technical consulting services. The performance location is designated as Canada, and while no specific office address or point of contact is provided, interested parties must submit proposals through the official Canada Buys portal using the provided UI link before the deadline. The contract does not specify a set-aside type, meaning it is open to all qualified vendors.

Media Buying Agencies

POSTED

DEADLINE

High-Precision Sensor and Calibration ServicesThe contract seeks the supply and calibration of high-accuracy temperature sensors, including standard platinum resistance thermometers, capable of sub-millikelvin precision to ensure precise monitoring of environmental chamber stability and thermal uniformity. These sensors are critical for maintaining rigorous temperature control in laboratory and research settings where minute deviations can impact experimental integrity. The work requires comprehensive calibration services traceable to national standards to guarantee measurement accuracy and reliability under controlled conditions. The procurement is issued as a subcontract by the National Research Council of Canada under the NAICS code 541320 for scientific and technical consulting services. Responses are due by August 4, 2026, with the opportunity posted on July 20, 2026, and performance expected to take place within Canada. The contract emphasizes technical capability, calibration documentation, and adherence to ultra-high precision requirements without specifying set-aside provisions or point of contact details, indicating a competitive process open to qualified suppliers meeting stringent metrological standards.

Landscape Architectural Services

POSTED

DEADLINE

CSA Safety Certification and Compliance TestingThe contract seeks third-party safety testing and certification services for an air bath system to ensure compliance with CSA or equivalent Canadian safety standards. The work is classified as a subcontract under NAICS code 541380, indicating specialized scientific and technical services, and is issued by the National Research Council of Canada on behalf of the Government of Canada. All testing must be conducted to meet the stringent regulatory requirements applicable in Canada, with results validated by an accredited certification body. The performance location is within Canada, and the services are critical for regulatory approval and market access of the system. The solicitation was posted on July 20, 2026, and responses are due by August 4, 2026, giving potential vendors approximately two weeks to prepare and submit proposals. The contract does not specify a set-aside classification, suggesting it is open to all qualified entities regardless of business size or status. While no point of contact is listed, interested parties can access further details through the official tender portal linked in the contract data. The successful bidder will be responsible for delivering comprehensive documentation, test reports, and certification evidence to demonstrate full compliance with applicable Canadian safety regulations.

Testing Laboratories and Services

POSTED

DEADLINE

Remote Monitoring and Control System IntegrationThe contract seeks integration of remote operation and monitoring capabilities for an air bath system through communication interfaces including RS232, Ethernet, USB, or GPIB, enabling real-time control and data acquisition from a distance. The system must support seamless, reliable connectivity to ensure precise temperature regulation and operational oversight without requiring physical access, targeting applications that demand high precision and continuous monitoring. The technical solution must be robust, compatible with existing infrastructure, and capable of sustaining continuous operational demands under standard laboratory conditions. Issued as a subcontract by the National Research Council of Canada under the Government of Canada, the solicitation is open for responses until August 4, 2026, with a North American Industry Classification System code of 541330 indicating it relates to scientific research and development services. Performance is expected to occur within Canada, and while no specific set-aside or point of contact is detailed, the requirement targets qualified vendors experienced in industrial automation, instrumentation control, and laboratory equipment integration. The posting is accessible via the Canada Buys portal, and proposers are expected to demonstrate proven capabilities in implementing similar remote monitoring solutions for environmental or thermal control systems.

Engineering Services

POSTED

DEADLINE

Precision Environmental Chamber ManufacturingThe contract requires the design and manufacture of a high-stability air bath system capable of maintaining temperature control within ±10 millikelvin for metrology-grade calibration of standard resistors. This system must meet exacting environmental stability specifications to ensure the precision required for calibration tasks in国家级 metrology laboratories. The technical demands center on thermal uniformity, long-term drift minimization, and minimal interference with sensitive electrical measurements, emphasizing reliability under continuous operation without external disturbances. The solicitation is issued as a subcontract by the National Research Council of Canada under the Government of Canada, with the North American Industry Classification System code 334516 indicating specialized instrumentation manufacturing. The response deadline is August 4, 2026, and performance is expected to occur within Canada. The contract targets suppliers with proven capability in precision environmental control systems, particularly those experienced in supporting national metrology standards and high-accuracy electrical calibration workflows. There is no set-aside designation specified, and the opportunity is open to qualified vendors capable of delivering a system that meets stringent technical and performance thresholds without reliance on external references or documentation.

Analytical Laboratory Instrument Manufacturing

POSTED

DEADLINE

Air Bath for Standard ResistorsThe National Research Council of Canada is procuring a single air bath system to replace its existing oil bath, ensuring a dry, clean, silent, and thermally stable environment for precision standard resistors used in thermometry applications, particularly for calibrating standard platinum resistance thermometers. The system must maintain temperature stability and uniformity of ±10 mK or better over 24 hours at 23°C, operate within a temperature range of 15°C to 35°C, and feature an internal volume between 50 and 120 liters with a set point resolution of 0.01°C or better. Remote control and data extraction are mandatory through standard interfaces such as RS232, Ethernet, GPIB, or USB, and the unit must be certified by CSA or an equivalent Canadian safety standard. The procurement is conducted as a sole-source award under subsection 6(d) of the Government Contracts Regulations, with Measurements International identified as the only capable supplier. Other vendors may submit a Statement of Capabilities by August 4, 2026, to challenge the sole-source determination, but must demonstrate full compliance with all technical requirements. Delivery is required by January 1, 2027, to the NRC’s facility in Ottawa, Ontario, and acceptance will occur upon verification of compliance at the delivery site. No contract value, pricing, or payment details are provided, and the solicitation does not include formal evaluation factors, weights, or contract clauses under the Federal Acquisition Regulation. The procurement is exempt from international trade agreements, and all submissions must be directed to Tamara Stabb, Procurement Officer, via email or written correspondence.

Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables

POSTED

DEADLINE

26-58075 Radio Frequency (RF) Test and Measurement SuiteThe National Research Council of Canada is seeking a fully integrated radio frequency (RF) test and measurement suite capable of supporting advanced metrology and quantum sensing research. The system must include a high-performance signal generator with a frequency range from 10 kHz to 50 GHz, featuring an integrated frequency multiplier that extends its output to 110–170 GHz and is controllable through the same interface. The generator must deliver exceptional signal purity with low phase noise and minimal harmonics, and it must accept external frequency references at either 10 MHz or 100 MHz to ensure long-term stability. Accompanying this is a signal/spectrum analyzer with a measurement range up to 50 GHz, designed to accurately capture signal magnitude, frequency content, harmonics, and spurious emissions for validating sensor outputs and system performance. A vector network analyzer with a frequency range up to 44 GHz is also required to comprehensively characterize RF components by measuring both magnitude and phase of reflection and transmission parameters, supporting testing environments from room temperature to cryogenic conditions. The entire system must function as a unified, compatible solution, ensuring seamless operation and data correlation across all instruments. The requirement arises from the critical need for precision RF instrumentation in quantum metrology, where accurate control and readout of quantum sensors depend on stable, low-noise signal generation and precise measurement capabilities. The suite will be used to validate experimental systems, ensure signal integrity, and characterize components under extreme operating conditions. Proposals must be submitted by August 14th, 2026 at 2 PM EDT, following a questions and answers period that concludes on August 7th, 2026. The solicitation, issued by the National Research Council of Canada under number 26-58075, is open to eligible suppliers and specifies that performance will take place in Canada. Primary point of contact for inquiries is Shawn Doyle, Contracting Authority, reachable via email or phone provided in the solicitation.

Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables

POSTED

DEADLINE

M-10 Partial Exterior Envelope ReplacementThe contract pertains to the exterior envelope and main entrance renewal of Building M-10 at the National Research Council Canada’s campus located at 1200 Montreal Road, Ottawa, Ontario, K1A 0R6. This procurement, identified by solicitation number 26-58015 under NAICS Code 238190, is exclusively open to Canadian suppliers due to the Policy on Reciprocal Procurement, and submissions from non-trading partners will be rejected. Bidders are required to attend one of two mandatory site visits on June 16 or 17, 2026, at the main entrance of Building M-10. Proposals must be submitted by July 22, 2026, and all work must be completed by March 31, 2027, with a performance period of 36 weeks from notification of award. The scope includes demolition, concrete restoration, metal fabrications, thermal and moisture protection systems, aluminum doors and glazing, gypsum board assemblies, and granular backfill, all executed in accordance with specified construction sections and technical requirements. Contractors must retain a qualified geotechnical engineer for investigations and testing, and all materials must be delivered in original factory packaging, labeled with manufacturer details, and stored off the ground in dry, clean, well-ventilated areas per manufacturer instructions. Packaging waste must be removed and returned as per the Construction Waste Management Plan. The contractor is obligated to comply with stringent security protocols, including valid Security Clearance for all personnel as outlined in SC01, and must maintain site security during alterations. Performance and payment bonds in prescribed government formats, issued by federally, provincially, or territorially licensed sureties, are mandatory. Insurance coverage must be obtained from insurers licensed to operate in Canada, and compliance with both Ontario and federal occupational health and safety regulations is required. All quality control testing must be conducted by independent agencies paid for by the contractor, with reports submitted digitally and including project identification, agency details, and dates. Final aesthetic standards demand defect-free surfaces, with walls and ceilings inspected under specified viewing conditions and lighting, and all products must be new, undamaged, and of the highest quality. The contractor must maintain complete and accurate financial records in machine-readable formats such as Excel, available for audit at Canada’s request during normal business hours. Cost breakdowns must be submitted within 72 hours of award and serve as the basis for all claims. A master Gantt

Other Foundation, Structure, and Building Exterior Contractors

POSTED

DEADLINE

in about 16 hours

Indigenous Participation Plan (IPP) ImplementationThe National Research Council of Canada is seeking a contractor to implement an Indigenous Participation Plan aimed at achieving a mandatory 5% Indigenous procurement target across the project lifecycle. This subcontract opportunity requires the successful bidder to develop and execute a detailed strategy that promotes meaningful engagement with Indigenous firms through subcontracting, hiring, or strategic partnerships. The plan must demonstrate measurable actions and outcomes that contribute to economic inclusion and capacity building within Indigenous communities across Canada. All activities must be structured to ensure compliance with the 5% target, with documentation and reporting protocols to verify progress throughout the contract term. The opportunity is open for responses until August 25, 2026, and is categorized under NAICS code 541611, which corresponds to management, scientific, and technical consulting services. The place of performance is across Canada, with no specific geographic limitations other than national scope. The contract falls under the Government of Canada’s broader commitment to Indigenous economic participation and does not specify a set-aside designation, meaning all eligible firms may respond. While no point of contact is listed, interested parties are directed to the Canada Buys portal for further details and submission requirements. Contractors are expected to align their approach with federal policies on Indigenous reconciliation and economic development.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

in about 1 month

Watermain Pipes and Fittings SupplyThe contract involves the supply of ductile iron, PVC, HDPE pipes, valves, hydrants, and fittings for watermain systems, all of which must comply with Canadian standards to ensure durability, safety, and regulatory adherence. The materials are intended for use across public water infrastructure projects in Canada, with specific requirements focused on material quality, pressure ratings, and installation compatibility to meet national plumbing and water distribution benchmarks. The solicitation is issued as a subcontract under the National Research Council of Canada, part of the Government of Canada, with a response deadline of August 25, 2026. The North American Industry Classification System code 423720 identifies the scope as wholesale trade of hardware, plumbing, and heating equipment. Performance of the contract is expected to occur throughout Canada, and interested suppliers must submit proposals before the stated deadline to be considered for award, with no set-aside provisions specified for small or disadvantaged businesses.

Plumbing and Heating Equipment and Supplies (Hydronics) Merchant Wholesalers

POSTED

DEADLINE

in about 1 month

Environmental Compliance and GHG ReportingThe contract titled Environmental Compliance and GHG Reporting requires the monitoring and systematic reporting of greenhouse gas emissions generated during construction activities across Canada, with the explicit goal of ensuring alignment with federal greenhouse gas reduction targets. The work involves collecting accurate emissions data from various construction sites, analyzing trends, and submitting compliant reports to meet government-mandated environmental standards. The scope demands technical expertise in emissions tracking methodology and a thorough understanding of federal environmental regulations applicable to construction operations. This subcontract, issued under NAICS code 541620, is solicited by the National Research Council of Canada on behalf of the Government of Canada, with a response deadline of August 25, 2026. Performance must occur throughout Canada, reflecting a national scope of operations. Interested parties are expected to demonstrate proven capability in environmental monitoring services and possess the infrastructure to deliver consistent, verifiable emissions data in real time. The contract underscores the Government of Canada’s commitment to environmental accountability in public construction projects and requires strict adherence to timelines, data integrity, and regulatory compliance throughout the performance period.

Environmental Consulting Services

POSTED

DEADLINE

in about 1 month

Surveying and As-Built DocumentationThe contract entails comprehensive topographic and layout surveys throughout all phases of construction, ensuring accurate spatial data collection to support project alignment and utility placement. These surveys are critical for ongoing construction accuracy and must be performed with precision to monitor changes and confirm adherence to design specifications. Final deliverables include certified as-built documentation that verifies the exact location, alignment, and configuration of all installed utilities, providing a legally recognized record of subsurface and surface infrastructure. The work is subcontracted under the National Research Council of Canada, a Government of Canada entity, with the place of performance located across Canada. The solicitation was posted on July 16, 2026, with responses due by August 25, 2026, and falls under NAICS code 541370, which pertains to surveying and mapping services. There is no specified set-aside classification, and the contract is open to qualified subcontractors capable of delivering high-accuracy survey data and authoritative as-built certification required for regulatory and operational compliance.

Surveying and Mapping (except Geophysical) Services

POSTED

DEADLINE

in about 1 month