Top

Fabrication of Wrought Iron Panels and Gates

Active

State & Local

Response Deadline08/13/2026, 10:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

General Info

Agency

California → Finance/Purchasing Department of City of PomonaView Agency

NAICS

332322 - Sheet Metal Work ManufacturingView NAICS

Place of Performance

CA, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 20

subcontract

Response DeadlineAug 13

Submission deadline

Response Deadline

08/13/2026, 10:00:00 PM UTCin 4 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

AgencyCalifornia → Finance/Purchasing Department of City of Pomona

ContactsNo contacts available

OfficeN/A

Organization / Agency

California → Finance/Purchasing Department of City of Pomona

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Manufacture custom wrought iron panels and gates (8'H x 4'L to 8'H x 20'L) for delivery and subsequent coating under the prime contract.

Similar Contracts

Same NAICS industry code

NAICS: 332322

New

DIBBS

Precision Panel Assembly ManufacturingThe contract calls for the precise manufacture of defense-grade panel assemblies intended for aircraft elevator systems, requiring strict adherence to approved engineering drawings, engineering change orders, and configuration control standards to ensure full compliance with military specifications. All work must be executed under rigorous quality assurance protocols to meet the demanding reliability and safety requirements of aerospace defense applications. The product must be produced in full alignment with established technical documentation and validated through documented configuration management practices to maintain traceability and consistency throughout production. Performance of this subcontract is designated to occur at Robins Air Force Base, Georgia, with a response deadline of August 17, 2026, and the solicitation was posted on August 9, 2026. The North American Industry Classification System code 332322 indicates the scope is tied to aircraft parts and supplies manufacturing, emphasizing specialized industrial capability. The contracting entity is the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense, underscoring the national security relevance of the project. The subcontract is unstructured for set-aside status and requires proposers to demonstrate proven experience in high-integrity defense component fabrication, with no specific contact information provided in the solicitation.履约必须通过官方DIBBS平台进行。

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Manufacture of Electrical Backshells to MIL-DTL-38999N SpecificationThe contract requires the fabrication of electrical backshells that fully comply with the MIL-DTL-38999N specification, encompassing strict adherence to material composition, dimensional tolerances, environmental resilience, and performance testing standards. These components are critical for high-reliability military and aerospace applications, necessitating precision manufacturing and rigorous validation to ensure operation under extreme conditions. The work must meet all technical and quality requirements defined by the military standard, with verification through approved testing protocols to confirm conformance. This is a subcontract opportunity issued by the Department of Defense’s ACTIVE DEVICES DIVISION, with performance centered at NEW CUMBERLAND, Pennsylvania, zip code 17070-5002. The solicitation was posted on August 9, 2026, and responses are due by August 20, 2026. It falls under NAICS code 332322, which classifies it within the electrical component and accessory manufacturing sector. There is no set-aside designation specified, and eligible contractors must be prepared to fulfill all technical, logistical, and compliance obligations by the stated deadline through the provided DIBBS portal link.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Precision Metal Fabrication of Infrared Viewer ContainerA custom metal container is being fabricated to securely transport and store an infrared viewer, with stringent requirements for durability, environmental protection, and electromagnetic shielding in accordance with MIL-STD specifications. The container must provide robust EMI/RFI shielding to ensure the sensitive infrared equipment remains operational in harsh field conditions, while also resisting moisture, dust, shock, and temperature variations. The fabrication work is governed by precise manufacturing standards to guarantee structural integrity and operational reliability under military-grade demands. The contract is issued as a subcontract under NAICS code 332322, with a response deadline of August 20, 2026, and a posted date of August 9, 2026. Performance is required at Camp Lejeune, North Carolina, with an official zip code of 28542-0141. The procuring entity is the Department of Defense through its Construction & Equipment Containers division, indicating the end user is likely a military or defense operational unit. All submissions and compliance documentation must meet the exacting technical criteria outlined by military specifications to qualify for award.

CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

DEADLINE

Precision Metal Fabrication and MachiningThe contract requires the precision fabrication of a defense-grade metal cover component for use in military vehicle or aircraft crew compartments, involving advanced manufacturing processes including stamping, machining, welding, and finishing to comply strictly with military specifications. The work must meet exacting standards for durability, dimensional accuracy, and environmental resilience under operational conditions, ensuring compatibility and safety within critical aerospace and ground combat systems. Production must adhere to defense-industry quality protocols and be traceable to applicable military standards without exception. The solicitation, issued under NAICS code 332322 for fabricated metal product manufacturing, is a subcontract opportunity posted by the Department of Defense’s ASC SUPPLIER OPER AE AND AF DIV, with performance required at Robins Air Force Base, Georgia, ZIP 31098-1887. Interested parties must submit responses by August 17, 2026, with no set-aside preferences indicated. The contract is accessible through the DIBBS system and demands full compliance with defense supply chain requirements, including material sourcing, inspection documentation, and delivery scheduling aligned with program timelines for integrated military systems.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Precision Metal Fabrication of Filter Cannister BaseplateThe contract entails the precision-engineered fabrication of a baseplate for a military filter cannister, requiring advanced metalworking processes including cutting, forming, welding, and finishing to comply with strict military specifications. The work must be executed to exacting standards ensuring structural integrity and performance in demanding operational environments, with all manufacturing steps subject to rigorous quality control and documentation. The product is intended for deployment within defense systems and must adhere to the technical and compliance requirements governing Defense Department procurement. The subcontract opportunity, posted on August 9, 2026, with a response deadline of August 20, 2026, is issued under NAICS code 332322 for other metal forging and stamping. Performance is required at a facility located in New Cumberland, Pennsylvania, with a ZIP code of 17070-5002. Although the contracting agency is listed as Construction & Equipment MROsvc I under the Department of Defense, no specific point of contact information is provided, and the solicitation is accessible via the DIBBS platform. No set-aside designation is indicated, leaving the opportunity open to any qualified subcontractor capable of meeting the technical and delivery requirements.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

Manufacturing of Tool Set Floorboard ComponentsThe contract solicits the fabrication and assembly of floorboard tool sets requiring metal forming, machining, and rigorous quality inspection compliant with military standards. It is a small business set-aside under the SBA’s Total Small Business Set-Aside program, exclusively open to small businesses as defined by the NAICS code 332322, which pertains to fabricated metal product manufacturing. The work involves precision manufacturing processes to ensure all components meet stringent defense specifications, with performance expected to align with the requirements of the Department of Defense. The opportunity was posted on August 9, 2026, and responses are due by August 17, 2026, through the DLA Dibbs platform under solicitation number SPE4A726T635T. The contracting activity is managed by the ASC Supplier Oper AE and AF Division, though specific performance location and point of contact details are not provided.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Precision Metal Fabrication & AssemblyThe contract requires the precision manufacture and assembly of a metal tube component in strict compliance with military drawings, encompassing all critical fabrication processes including cutting, bending, welding, and thorough inspection to meet Department of Defense standards set by the Fluid Handling Division. The work must adhere to DLA specifications to ensure the component’s structural integrity and performance for military applications, with all work performed at the designated place of performance in New Cumberland, Pennsylvania, under the NAICS code 332322 for fabricated metal product manufacturing. This is a subcontract opportunity with a response deadline of August 20, 2026, and was posted on August 9, 2026, indicating a competitive solicitation process for qualified suppliers capable of delivering defense-grade metal assemblies. The absence of a set-aside designation suggests the contract is open to all eligible small and large businesses, and all submissions must align with the technical requirements outlined in the military specifications to qualify for award. Completion and delivery must satisfy rigorous quality control protocols to ensure full compliance with federal defense procurement standards.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Precision Metal Bracket Manufacturing (Angle Bracket)The contract requires the manufacture and delivery of 71 precision-engineered angle brackets identified by NSN 5340-01-531-6810, with strict compliance to military specifications governing design, performance, and quality standards. Each unit must be accompanied by full material certification and traceability documentation to ensure adherence to defense-grade requirements, including origin of raw materials and all processing steps. The work is designated as a subcontract under NAICS code 332322, and the place of performance is specified as New Cumberland, Pennsylvania with ZIP code 17070-5002. The solicitation was posted on August 9, 2026, and responses are due by August 20, 2026, with no set-aside classification indicated. The procuring entity is the Department of Defense through the Land Supply Chain organization.

POSTED

DEADLINE

Supply of Quick-Acting Access Covers (12x12)The contract calls for the manufacture and delivery of 52 quick-acting access covers, each measuring 12x12 inches, designed specifically for ventilation applications and fully compliant with military specifications. These covers must be produced and shipped FOB origin with a strict delivery deadline of 74 days from contract award. The requirement is structured as a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified by the SBA are eligible to compete, ensuring procurement goals for small business participation are met. The NAICS code 332322 designates this as a manufacturing assignment within the sheet metal work category. The solicitation was posted on August 9, 2026, with responses due by August 20, 2026, and is managed by the Land Supply Chain under the Department of Defense. The designated place of performance is Tracy, California, with a ZIP code of 95304-5000, indicating where the products will ultimately be utilized or inspected. The contract is accessible through the DIBBS platform, and while no point of contact is listed, bidders must adhere to all military standards for construction, performance, and documentation. The set-aside status and tight delivery window emphasize the urgency and the importance of domestic small business capability in meeting this defense-related need.

POSTED

DEADLINE

Small Business Joint Venture or Teaming Support (Socioeconomic Participation)This contract opportunity is reserved exclusively for SBA-certified small businesses, including SDVOSBs, WOSBs, and HUBZones, which may participate through joint ventures or by serving as subcontractors under a prime contractor's small business set-aside representation. The solicitation falls under a Total Small Business Set-Aside classification as defined by FAR 19.5, ensuring that all performance obligations are fulfilled by qualified small business concerns. The NAICS code 332322 indicates the work involves Armament and Ordnance Manufacturing, and the contracting activity is managed by the Department of Defense under LSO Combat Vehicles and Armament. Interested parties must respond by the deadline of August 24, 2026, with submissions guided by the DIBBS platform to ensure compliance with federal procurement requirements. Participation is contingent on proper representation of small business status and adherence to joint venture or subcontracting rules established by the SBA and federal contracting regulations.

LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

Precision Metal Fabrication of BRACKET, ANGLE (NSN 5340014818190)The contract involves the precision manufacturing of an angle bracket to military specifications under National Stock Number 5340014818190, with required operations including cutting, bending, drilling, and finishing to meet exact dimensional tolerances and material standards. The work must adhere to stringent military quality criteria, ensuring structural integrity and compatibility with defense systems. This is a subcontract opportunity set aside exclusively for small businesses under the SBA’s Total Small Business Set-Aside program, classified under NAICS code 332322 for metal fabrication services. The solicitation was posted on August 9, 2026, with responses due by August 24, 2026, and the performance is tied to the Department of Defense’s Combat Vehicles and Armament division, though no specific location is indicated for delivery or execution.

LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

Hollow Metal and Fire Door Framing SupplyThe contract seeks the supply of UL-listed hollow metal frames and fire-rated door leaves intended for seamless integration with access control and fire safety systems, ensuring compliance with stringent safety and security standards. All components must meet recognized certification requirements and be suitable for installation in facilities under the jurisdiction of the City of Rapid City, South Dakota, with performance obligations tied to the specified technical and regulatory benchmarks for fire resistance and operational reliability. Bids must be submitted by September 1, 2026, and the opportunity is structured as a subcontract under NAICS code 332322, which classifies it within the manufacturing segment for metal doors and frames. While no set-aside designation is specified, interested parties should ensure full alignment with the technical specifications for fire ratings and compatibility with electronic access systems. The solicitation is publicly accessible through the provided link, and all submissions must adhere to the established deadline to be considered.

POSTED

DEADLINE

More opportunities from California → Finance/Purchasing Department of City of Pomona

Same awarding agency

NAICS: 484220

SLED

Transportation and Delivery Services

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Supply of Miscellaneous Fabricated Steel Products

Ornamental and Architectural Metal Work Manufacturing

POSTED

DEADLINE

Powder Coating Application Services

Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

DEADLINE

Sandblasting and Surface Preparation Services

Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

DEADLINE

Small and Minority-Owned Business Participation (Supplier Outreach Opportunity)The City of Pomona’s Finance/Purchasing Department is offering an opportunity for certified Minority Business Enterprise, Women Business Enterprise, and Disadvantaged Business Enterprise suppliers to engage in city-related contracting through supplier outreach initiatives. This is not a formal subcontracting opportunity with mandatory requirements, but rather a voluntary inclusion effort aimed at increasing the participation of diverse suppliers in city projects. Prime contractors are encouraged to work with certified MBE, WBE, or DBE firms to support local economic development and meet the city’s broader outreach goals, though no formal subcontracting plan is required. The initiative is designed to foster relationships and create visibility for certified businesses without imposing binding obligations on prime vendors. This opportunity is open to eligible suppliers who respond by the deadline of August 13, 2026, at 10:00 PM Pacific Time, with the solicitation posted on July 20, 2026. While no NAICS code, set-aside classification, or specific contracting details are provided, the initiative is structured as a subcontract outreach program under the auspices of the City of Pomona in California. Interested suppliers are encouraged to visit the provided portal link for additional information, submission guidelines, and potential alignment with upcoming project needs. There is no formal bid or proposal submission required, but engagement through this platform enhances a supplier’s chances of being considered by prime contractors pursuing city projects.

Business Associations

POSTED

DEADLINE

Transportation and Material Handling ServicesThe contract is for transportation and material handling services related to fabricated metal components, requiring the movement of items to and from a vendor's facility for coating operations. The City of Pomona’s Finance/Purchasing Department will deliver the components to the vendor prior to surface treatment and retrieve them after the coating process is complete. Responsibility for managing the inbound and outbound logistics flow may fall to a prime contractor, who may need to engage a third-party logistics partner to ensure consistent, reliable, and timely transportation. The work is classified under NAICS code 484220, which covers specialized freight trucking, indicating the need for equipment and expertise suited for handling industrial metal parts. Responses must be submitted by August 13, 2026, at 10:00 p.m. Pacific Time, and the opportunity is structured as a subcontract under the City of Pomona’s procurement process.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Sandblasting and Powder Coating – Miscellaneous Fabricated Metal ProductsThe contract encompasses sandblasting and powder coating services for a variety of small-to-medium fabricated metal components such as square tubing, pipe racks, flat stock, corrugated steel, and other structural or architectural metal elements, with work performed on an as-needed basis. The scope is focused on surface preparation and protective finishing to ensure durability and aesthetic quality for metal parts used in municipal or infrastructure applications. All work must meet industry standards for surface cleanliness and coating adherence, with quantities and schedules dictated by operational demands. This subcontract is issued by the Finance/Purchasing Department of the City of Pomona in California under NAICS code 332812, which classifies it as a metal coating service. The solicitation was posted on July 20, 2026, with a response deadline of August 13, 2026, at 10:00 PM Pacific Time. The place of performance and specific office details are not provided, indicating that work may be conducted at the vendor’s facility or as directed by the city. Interested parties must submit proposals through the designated online portal before the deadline to be considered for award.

Metal Coating, Engraving (except Jewelry and Silverware), and Allied Services to Manufacturers

POSTED

DEADLINE

Sandblasting and Powder Coating – Wrought Iron Panels & GatesThe contract calls for surface preparation through sandblasting and the application of protective powder coating on large wrought iron panels and gates ranging from 8 feet high by 4 feet wide to 8 feet high by 20 feet wide, with an estimated volume of 200 units over a three-year term. Work must be performed to ensure thorough removal of rust, old coatings, and contaminants prior to coating, and the powder coating must provide durable, long-lasting corrosion resistance suitable for outdoor exposure. The contract is structured as a subcontract under NAICS code 332812, which pertains to metal coating services, and is issued by the Finance/Purchasing Department of the City of Pomona in California. Responses are due by August 13, 2026, and performance is expected to meet specified quality standards without detailing exact location requirements beyond the broader jurisdictional scope of the issuing agency.

Metal Coating, Engraving (except Jewelry and Silverware), and Allied Services to Manufacturers

POSTED

DEADLINE

Sandblasting and Powder Coating Services

Solicitation # 206-1016

The City of Pomona is soliciting bids for a three-year contract to provide annual sandblasting and powder coating services through a competitive procurement process under solicitation number 206-1016. All work must be performed at the vendor’s facility, with the City responsible for transporting items to the vendor and retrieving them upon completion; the contract is strictly a service agreement and does not include material supply. Vendors must meet all specified technical and operational requirements outlined in the Scope of Services and must demonstrate the capability to deliver consistent, high-quality results in accordance with City standards. The solicitation is open to qualified local companies and is managed by the Finance/Purchasing Department, with responses due by August 13, 2026 at 10:00 PM Pacific Time. The primary point of contact for inquiries is Sonia Gil, who can be reached via email or phone provided in the solicitation. The contract will be awarded under a state and local government procurement framework, and all performance is expected to occur within California.

Other Building Finishing Contractors

POSTED

DEADLINE

Sandblasting and Powder Coating Services

Solicitation # 2026-1016

The City of Pomona is soliciting bids for a three-year contract to provide annual sandblasting and powder coating services exclusively at the vendor’s facility, with all materials transported to and from the vendor by City personnel. This is a service contract under Invitation for Bid No. 2026-1016, with proposals due by August 13, 2026, and must be submitted exclusively through the PlanetBids vendor portal, with no exceptions for hardcopy, email, or fax submissions. The scope includes blasting and powder coating wrought iron panels and gates measuring between 8 feet tall by 4 feet wide and 8 feet tall by 20 feet wide, as well as miscellaneous fabricated products such as square tubing, pipe racks, flat stock, and corrugated steel, with an estimated quantity of 200 units for the primary item. All work must comply with the City’s specifications and code, and vendors must hold all necessary licenses and certifications. The City retains the right to inspect and accept completed work at its designated delivery location, with payment occurring only upon successful delivery, acceptance, and receipt of a properly formatted invoice. Contracts exceeding $5,000 require a City purchase order, and invoices must be sent directly to the City for payment by check; no electronic invoicing systems are used. Bidders must submit a signed Statement of Non-Collusion, Executive Order N-6-22 Certification confirming no business ties to sanctioned Russian entities, and complete the Minority Business Questionnaire if claiming minority or women-owned status. Insurance requirements include Professional Liability, General Liability, Workers’ Compensation, and Automobile Liability, with certificates and endorsements submitted as Exhibit A. No formal clause numbers from the FAR are applied, but the procurement follows local policies emphasizing responsibility and responsiveness. Awards will be made to the lowest responsive and responsible bidder under LPTA principles, evaluating quality, capacity, financial stability, past performance, and technical capability without numerical weighting. Strict conflict-of-interest rules prohibit vendors with current or recent City employees or relatives of City officials from bidding unless a City Council waiver is obtained, and any violation of ethical conduct, including offering gratuities or engaging in bid collusion, will result in immediate disqualification or contract voidance. All packaging must clearly display the City’s purchase order number, and shipments are F.O.B. Destination with freight costs included in the bid price. The City reserves the right to reject any bid, and no estimated contract value is provided since pricing fields remain blank for vendor proposal

POSTED

DEADLINE

Minority- and Female-Owned Business (MBE/WBE) Program Support

Sports and Recreation Instruction

POSTED

DEADLINE

Insurance and Risk Management Compliance

Insurance Agencies and Brokerages

POSTED

25 days ago

DEADLINE

in about 1 month

View Details