Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

FACILITY INDUSTRIAL FAN

Active

405-26R0024196State & Local

Response Deadline08/10/2026, 11:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Department of Public Safety in Texas is seeking bids for industrial fans to be installed at its Equine Facility under solicitation number 405-26R0024196. The solicitation was posted on July 27, 2026, with a firm deadline for responses set for August 10, 2026, at 11:00 PM Central Time. The contract is classified as a state, local, or educational government procurement, with no specific set-aside designation. The equipment is required for use at the agency’s facility located within Texas, and performance is expected to take place at this designated location. Interested vendors must submit their proposals through the Texas SmartBuy portal and should direct all inquiries to the primary point of contact, Ricardo Cama, via email at Ricardo.Cama@dps.texas.gov or by phone at 512-424-2004. The solicitation does not specify a NAICS code, and no additional details regarding size standards or eligibility requirements are provided beyond the general agency and location information.

General Info

Texas DPS seeks industrial fans for Equine Facility by August 10, 2026, via Texas SmartBuy.

Agency

Texas → Department of Public Safety

NAICS

333413 - Industrial and Commercial Fan and Blower and Air Purification Equipment ManufacturingView NAICS

Place of Performance

TX, US

Set-Aside

NONE

Documents

(7)

ESBD_543089_1785180264207_SOL_EXH_F.6_DPS Online Bid Room Vendor Exhibit (16).pdf

PDF

ESBD_543089_1785180206949_SOL_EXH_F.2_Information and Certifications Form (30).pdf

PDF

ESBD_543089_1785180248907_SOL_EXH_F.5_Request for Taxpayer Identification Number and Certification W-9 (29).pdf

PDF

ESBD_543089_1785180219148_SOL_EXH_F.3_Form AP-152 Application for Texas Identification Number - AP-152 - Version 7-25.19 (3).pdf

PDF

ESBD_543089_1785180234317_SOL_EXH_F.4_Direct Deposit Authorization Form (31).pdf

PDF

ESBD_543089_1785180172804_SOL_PST_IFB_26R0024196.pdf

PDF

ESBD_543089_1785180193470_SOL_EXH_F.1_DPS Standard Terms and Conditions (12).pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation

PostedJul 27

Solicitation

Response DeadlineAug 10

Submission deadline

Response Deadline

08/10/2026, 11:00:00 PM UTCin 13 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyTexas → Department of Public Safety

Contacts1 person available

OfficeTX, US

Organization / Agency

Texas → Department of Public Safety

Office AddressTX, US

Contacts

Ricardo Cama

contact@example.gov

+1 (555) 000-0000

Full Description

Show more

The Department of Public Safety is requesting bids for industrial fans for our Equine Facility.

Similar Contracts

Same NAICS industry code

FAN, TUBEAXIALThe contract pertains to the procurement of one axial fan, part number 041325, with NSN 4140-01-534-3657, supplied by Rotron Incorporated, CAGE code 82877, under solicitation SPE8E7-26-T-3360. The item is to be delivered FOB origin within five days of order receipt, with the original required delivery date set for November 6, 2024, to the Sasebo Repair and Supply Facility in Japan. The contract mandates strict compliance with MIL-STD-2073-1E for packaging and MIL-STD-129 for marking and barcoding, requiring clean and dry preservation with no preservation materials, plastic bag unit containment, and intermediate packing level. No special marking is needed beyond standard requirements. Mercury and mercury-containing compounds are prohibited unless used in functional components such as batteries, fluorescent lights, sensors, or weapons systems specified by NAVSEA, and any portable mercury-containing devices must feature shockproof construction and a secondary containment boundary per NAVSEA 5100-003D. The contract incorporates DLA’s Master List of Technical and Quality Requirements as referenced by R and I numbers and applies DLA packaging directives under RP001. Cybersecurity and information safeguarding are governed by DFARS 252.204-7012, requiring compliance with NIST SP 800-171 for safeguarding covered defense information and reporting cyber incidents. Additional compliance obligations include hazardous materials labeling per 29 CFR 1910.1200, whistleblower rights notification, restrictions on compensation for former DoD officials, and strict controls over the disclosure of government work products and third-party cyber incident data. Transportation by sea is subject to specific notice and reporting requirements under DFARS 252.247-7023, including advance notification for foreign-flag vessel use and submission of ocean bills of lading. Payment is facilitated exclusively through the Wide Area WorkFlow system, and the contractor must maintain current SAM registration. The contract includes clauses addressing trafficking in persons, employment eligibility verification, sustainable products, and small business representation, with deviations from standard FAR language authorized under deviation 2026-O0038. The contract type is undetermined at this stage, and the unit price is $1.000 per unit, though final pricing

Defense Logistics Agency

POSTED

about 19 hours ago

DEADLINE

IMPELLER, FAN, AXIALThe contract pertains to the procurement of one axial fan impeller with part number R1-5580 IT 1 and NSN 4140-01-483-3913, furnished by Howden Buffalo Inc. and FM AF, LLC under solicitation SPE8E7-26-T-3406. Delivery is required within 20 days of contract award to the destination FPO AP 96694-2900 aboard the USS TRIPOLI LHA 7, with no tolerance for quantity variance. All items must comply with MIL-STD-2073-1E packaging standards and MIL-STD-129 marking requirements, and must be palletized in accordance with DLA packaging guidelines. The supply is subject to strict restrictions prohibiting the intentional addition of mercury or mercury compounds, except in permitted exceptions such as batteries, fluorescent lights, sensors, controls, weapon systems, and specified chemical reagents, with portable mercury-containing devices requiring shockproof construction and secondary containment per NAVSEA 5100-003D. The contract incorporates all applicable technical and quality requirements from the DLA Master List of Technical and Quality Requirements, referenced via R and I numbers, and adherence to these is mandatory. The item must be delivered FOB destination, inspected and accepted upon arrival, with transportation and shipment procedures governed by DLAD Procurement Notes C19 and C20. The solicitation was issued on July 27, 2026, with responses due by August 7, 2026, and the final delivery is required by May 8, 2026, though the original required delivery date precedes the solicitation date indicating a potential scheduling adjustment or correction.

Defense Logistics Agency

POSTED

about 19 hours ago

DEADLINE

FAN, VENTILATINGThe contract pertains to the procurement of one fan ventilating unit identified by NSN 4140-01-669-9560 and part number 135-695-004 from NEXGEN COMPOSITES LLC, with a required delivery within five days of award. The item must be delivered FOB origin, with no tolerance for quantity variance, and is subject to inspection and acceptance at the destination. Packaging must comply with MIL-STD-2073-1E and marking must follow MIL-STD-129, including palletization per DLA packaging standards. The shipment is designated as a vessel shipment requiring the fastest traceable transport method, explicitly prohibiting parcel post, and is to be delivered to the Marine Corps Base Camp Pendleton, California, with a specified point of contact and freight address. The contract references mandatory technical and quality requirements from the DLA Master List and includes specific packaging, storage, and handling codes. The solicitation number is SPE8E7-26-T-3248, with a response deadline of July 30, 2026, and an original required delivery date of July 2, 2026, under a federal procurement issued by the Defense Logistics Agency under NAICS code 333413.

Defense Logistics Agency

POSTED

about 19 hours ago

DEADLINE

IMPELLER, FAN, AXIALThe contract specifies the procurement of one axial fan impeller with part number 064-48703D000 and NSN 4140014933547, supplied by JOHNSON CONTROLS NAVY SYSTEMS, LLC under solicitation SPE8E7-26-T-3228. Delivery is required within five days of contract award, fob origin, with no tolerance for quantity variance. Inspection and acceptance occur at the destination, and packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, including marking per MIL-STD-129 and palletization per RP001. The item is to be shipped to the Norfolk Naval Air Terminal in Virginia, with a specified parcel post address and freight shipping location, and transport instructions reference DLAD PROC NOTES C19 and C20. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, with revisions controlled by the solicitation issue date. The contract includes specific unit of issue, pricing, and government use codes, and the required delivery date is July 1, 2026, despite the solicitation being posted in 2026 with a response deadline of three days later. All documentation must align with DLA standardized formats and procedures, and no bidset is available for this acquisition.

Defense Logistics Agency

POSTED

about 19 hours ago

DEADLINE

26-58018 Laboratory Wind Wall System, Amendment #5The National Research Council of Canada’s Aerospace Research Centre is seeking a turnkey Laboratory Wind Wall System for free-flight testing of mid-size unmanned aircraft in complex aerodynamic environments such as ship airwakes and urban wind fields. The system is designed as a vertically stacked fan array with a nominal 5 m × 5 m exit face, positioned 3 m above ground level, and must deliver a controlled, repeatable, and configurable airflow across a test plane located 5–6 m downstream, with a minimum 4 m × 4 m uniform flow region. The system must achieve peak axial wind speeds of 21–22 m/s with turbulence intensity ranging from 7% to 25%, and maintain minimum speeds of 1 m/s, while supporting ramp-up acceleration of 10 m/s² and ramp-down deceleration of -5 m/s², with a swirl number of 0.5 at the test plane. Each fan must be independently controllable with incremental speed adjustments of 0.2 m/s and gradients of up to 2 m/s per meter, with integral length scales between 2 and 50 m. The wind wall must operate reliably across Canadian climates—from -20°C to +30°C for normal operation, with a minimum of 800 cold starts, and be stored safely between -20°C and +60°C. All electrical components must meet Canadian Electrical Code (CSA C22.1) and IP65 standards for high-voltage enclosures, and the system must comply with IP34 for operation in rain or snow. A 20,000-hour operational lifespan is required, and the entire system must be delivered as a fully commissioned, self-supporting unit with an engineered foundation anchored to meet National Building Code of Canada wind load standards, sealed by a licensed professional engineer. The system’s control software must be compatible with Windows 10/11 and major Linux distributions, support GPS-timestamped data output, external triggers for synchronized logging, and automation of repeatable wind profiles. Redundancy must be built into the system to maintain airflow stability in the event of a single fan failure, and a physical emergency stop must be installed for immediate shutdown. An optional expansion to a 7 m × 7 m configuration must be designed into the base system with equivalent fan modules, compatible structural and control systems, and must remain functional with the same performance standards. The proposal must include separate pricing for the optional upgrade, which

National Research Council of Canada

POSTED

DEADLINE

Axial Fan Impeller SupplyThe contract is for the supply of a single axial fan impeller with National Stock Number 4140013488857, manufactured by HARTZELL FAN INC, to be delivered to Fort Eustis, VA with a zip code of 23604-5577. The work includes all necessary packaging, labeling, and transportation to ensure the component meets required specifications and arrives at the designated military location. The solicitation was posted on July 26, 2026, with responses due by August 6, 2026, and it is classified as a subcontract under NAICS code 333413 for other industrial machinery manufacturing. The awarding agency is the Defense Logistics Agency under the Department of Defense, and the effort supports military operations at the specified installation. All deliverables must comply with federal procurement standards and be fully ready for operational use upon receipt.

Defense Logistics Agency

POSTED

DEADLINE

FAN, CENTRIFUGALThis contract specifies the procurement of 15 centrifugal fans under solicitation SPE4A5-26-T-309P, with a delivery requirement of 320 days and a final delivery date of June 20, 2027. The item is identified by NSN 4140016989589 and part number N149460-3, supplied by Lockheed Martin Corporation, and is designated as a critical application item. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with compliance mandatory. Sampling must adhere to MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and attributes are classified with defined verification levels or AQLs. The fan must be free of intentional mercury or mercury compounds in any component or contact surface, except for approved functional uses such as batteries or instruments, with portable mercury-containing devices requiring dual containment per NAVSEA 5100-003D. Packaging and preservation must comply with MIL-STD-2073-1E and RP001, prohibiting mercury in all packaging materials and marking per MIL-STD-129. Delivery is FOB origin to the DLA Distribution facility in New Cumberland, Pennsylvania, with no quantity variance allowed. Inspection and acceptance occur at destination, and all documentation, configuration control, and source approval must follow specified DLA procedures including SAR, ECP, and deviation requests.

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

IMPELLER, FAN, AXIALThe contract is for a single axial fan impeller, part number 44-28-DL3, with NSN 4140-01-348-8857, supplied by Hartzell Fan Inc. under solicitation SPE8E7-26-T-3401, with a required delivery within ten days of award and delivery terms set at FOB origin. The item must comply with technical and quality standards referenced from the DLA Master List, packaging requirements per MIL-STD-2073-1E and MIL-STD-129, and must be marked without special identification beyond standard military labeling. The supply is subject to strict prohibitions on intentional use of mercury or mercury-containing compounds, except for designated functional applications like batteries, instruments, or sensors as specified by NAVSEA, with portable devices requiring shockproof design and secondary containment. Packaging must follow DLA guidelines including palletization, containment methods, and unique coding, with shipments tracked via RDD 555 and delivered to Fort Eustis, Virginia, using traceable freight methods—parcel post is prohibited. Quantity is fixed at one unit with no variance permitted, and inspection and acceptance occur at the destination. The contract specifies a required delivery date of July 9, 2026, with procurement managed by the Defense Logistics Agency under NAICS code 333413, and all documentation must adhere to source approval and supply chain traceability protocols.

Defense Logistics Agency

POSTED

DEADLINE

FAN, CENTRIFUGALThe contract is for the procurement of nine centrifugal fans, identified by NSN 4140-01-678-6881 and part number 269408 from VANAIR MANUFACTURING INC, under solicitation SPE8E7-26-T-0169. The unit price is $9.00 per unit, with a total contract value of $81.00, and delivery is required FOB origin within 167 days from the original required delivery date of February 21, 2026, with a need ship date of April 13, 2026. The quantity is strictly fixed with no variance allowed, and inspection and acceptance both occur at the destination. All packaging must comply with DLA packaging requirements, specifically MIL-STD-129 for marking and labeling, and ASTM D3951 for general packaging, with precedence given to the DLA Master List of Technical and Quality Requirements when conflicts arise. The items must be palletized according to RP001 guidelines and are to be delivered to the DDSP New Cumberland facility in Pennsylvania, with parcel post and freight shipping instructions directing to the same address. Covered defense information may apply, and removal of government identification from non-accepted supplies is mandated. The contract is governed by DLA procedures for transportation, and the unit of issue is each (EA), consistent with the DoD authorized standard.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

IMPELLER, FAN, AXIALThe contract specifies the procurement of one axial fan impeller with NSN 4140-01-260-3488 under solicitation SPE8E9-26-Q-0623, issued by the Department of Defense through DLA. The item is subject to a firm fixed price with no variance in quantity, requiring delivery within 60 days after award at origin FOB terms, with inspection and acceptance occurring at the destination. Packaging must comply with MIL-STD-2073-1E, using prescribed methods including drying, moisture barrier wrapping, and designated cushioning materials, while avoiding plastics where possible. Marking follows MIL-STD-129 with no special codes. The supplier must strictly prohibit intentional addition or direct contact of mercury or mercury-containing compounds with the supplied hardware, except for exempted functional uses such as batteries, instruments, sensors, weapon systems, or chemical reagents as defined by NAVSEA, and portable mercury-containing devices must include shockproof design and secondary containment per NAVSEA 5100-003D. All technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, with the applicable revision determined by acquisition type and solicitation timelines. The delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania, and transportation procedures adhere to DLAD Proc Notes C19 and C20. The material need date is December 8, 2026, and the solicitation response deadline was July 31, 2026, with a posted date of July 24, 2026.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

FAN, CENTRIFUGALThe contract is for the procurement of nine centrifugal fans with NSN 4140-01-678-6881 and manufacturer part number 269408 from VANAIR MANUFACTURING INC, issued under solicitation SPE8E7-26-T-3000. The unit price is $9.00 per unit, totaling $81.00, with delivery required FOB origin within 167 days of contract award, and the original required delivery date is set for September 22, 2026, with a need ship date of December 7, 2026. No quantity variance is permitted, and inspection and acceptance both occur at the destination. Packaging must comply with ASTM D3951, but all technical and quality requirements from the DLA Master List of Technical and Quality Requirements take precedence. Marking and labeling of packaging must adhere to MIL-STD-129, and palletization must follow DLA Packaging Requirements for Procurement. All supplies must be delivered to the specified DLA Distribution facility in New Cumberland, Pennsylvania, and transportation instructions reference DLAD PROC NOTES C19 and C20. The contract incorporates provisions for the removal of government identification from non-accepted supplies and may involve covered defense information. The unit of issue is each, and all details align with the DoD authorized unit of issue standards.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

FAN, TUBEAXIALThe contract is for the supply of six tube axial fans identified by NSN 4140-01-676-6052 and part number 77A126678P7, sourced from Lockheed Martin Corporation and Mercury Systems, Inc. The item is procured under solicitation SPE8E9-26-Q-0624 with a firm fixed price and zero variance in quantity, requiring exact delivery of six units. Delivery must be completed within 60 days after order placement, with shipment originating from the supplier and accepting delivery at the destination point. The product must comply with MIL-STD-2073-1E packaging standards, including specific preservation methods, wrapping materials, and unit packaging requirements, and all marking must adhere to MIL-STD-129 without special coding. Packaging and palletization must meet DLA’s RP001 requirements. Cybersecurity compliance is mandated at CMMC Level 2 through a self-assessment, and the contract incorporates covered defense information under RD002, requiring adherence to applicable DLA technical and quality requirements referenced by R or I numbers from the DLA Master List. The item is designated for delivery to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania, with transportation governed by DLAD procedural notes C19 and C20. The government’s material need date is August 4, 2026, and the solicitation closed on July 31, 2026, with the contract issued under the Department of Defense’s Construction & Equipment MRO SVC I organization. Unit of issue and purchasing details align with ANSI X12 standards as defined by official DLA guidance.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE