Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

FAIRING, AIRCRAFT

Active
SPE4A5-26-T-286WFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the procurement of five aircraft fairings identified by NSN 1560-01-147-8383 under solicitation SPE4A5-26-T-286W, issued by the Department of Defense’s ASC Supplier Oper OEM Division through the Defense Logistics Agency. Deliveries are required 171 days after order date to Tinker AFB, Oklahoma, with inspection and acceptance taking place at destination per FAR 52.246-2. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the revision in effect on the award date controlling, and are referenced via RA001. The item is to be manufactured in compliance with SAE AS9003 or ISO 9001 tailored to AS9003, and higher-level quality requirements for both manufacturers and non-manufacturers align with ISO 9001:2015. Sampling and acceptance follow MIL-STD-1916, ASQ H1331 Table 1, or a comparable zero-based plan, with critical, major, and minor attributes assigned AQLs of 0.1, 1.0, and 4.0 respectively, and zero non-conformances required for acceptance under MIL-STD-105/ASQ 21.4. Packaging and marking must adhere to RP001 DLA Packaging Requirements and MIL-STD-129, with no special marking required. Technical data associated with the item is subject to export controls under ITAR or EAR, and access is restricted to contractors with approved JCP certification, completed training, and DLA authorization under DFARS 252.225-7048. The contractor must safeguard covered defense information per FAR 252.204-7012, comply with Cybersecurity Maturity Model Certification Level 2 self-assessment, and prohibit unauthorized disclosure of information. The item is not required to carry unique identification per DFARS 252.211-7003(c)(1)(i) and must be marked per RQ017 for physical identification. Hazardous materials must be labeled under 29 CFR 1910.1200 with accompanying MSDS, and radioactive materials exceeding specified activity levels must be clearly identified per MIL-STD-129. The contractor must be

General Info

Procure five aircraft fairings under ITAR/EAR controls, deliver to Tinker AFB within 171 days, comply with DLA standards and CMMC Level 2.

Agency

Department Of Defense → ASC SUPPLIER OPER OEM DIVISIONView Agency

NAICS

336413 - Other Aircraft Parts and Auxiliary Equipment ManufacturingView NAICS

Place of Performance

3301 F AVE CEN REC BLDG 506 DR 22, TINKER AFB, OK, 73145-8000, US

Set-Aside

NONE

Documents

(1)

RFQ SPE4A5-26-T-286W DLA Aviation Jul 15 2026

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER OEM DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC SUPPLIER OPER OEM DIVISION
View Agency Profile
Office AddressUS
Contacts
SIOBHAN WALKER
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
FAIRING,AIRCRAFT
FAIRING,AIRCRAFT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD002, COVERED DEFENSE INFORMATION APPLIES
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 1560-01-147-8383 Quantity: 5 EA Purchase Request: 7017487191QTY: 5 Delivery: 171 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 336413
New
DIBBS
SEAL ASSEMBLY, TURBIThe contract pertains to the procurement of seven Seal Assemblies, Turbi, each with an outside diameter of 6.23 inches and an inside diameter of 1.75 inches, constructed from 17-4PH CRES material, designed to seal the turbine end of NHA 1660010631213 on F15 aircraft. The item carries the NSN 1660002885452 and is identified by Honeywell International part number 571575-1. Delivery is required FOB Origin by September 12, 2027, with a lead time of 414 days after delivery order issuance, and the destination is DLA Distribution Depot Oklahoma at Tinker Air Force Base. The contract mandates compliance with MIL-STD-2073-1E for packaging using Preservation Method 33 (Clean/Dry), with no preservation material, wrap material as EA, and non-standard unit containers marked for mail delivery under packaging code U. All items must be marked per MIL-STD-129 with special marking code 17 indicating a reusable container and palletized according to DLA RP001 packaging requirements. Each unit must be uniquely identified with an IUID compliant with MIL-STD-130 and DFARS 252.211-7003, and government identification must be removed from non-accepted supplies per RQ011. The supply must meet tailored higher-level contract quality requirements and adhere to CMMC Level 2 self-assessment and NIST SP 800-171 cybersecurity standards. Inspection and acceptance occur at the destination under MIL-STD-1916 or equivalent zero-based sampling plans requiring zero non-conformances unless otherwise specified, with critical, major, and minor attributes assigned verification levels VII, IV, and II respectively. The contract is a fixed-price type per FAR 52.216-1 Alternate I and includes clauses for safeguarding covered contractor information systems, combating human trafficking, employment eligibility verification, sustainable products, hazardous material safety, and accelerated payments to small business subcontractors. Invoicing is mandatory through Wide Area WorkFlow using the Invoice and Receiving Report format, and the solicitation requires the offeror's UEI and CAGE code with representation of small business status, socioeconomic designations, and disclosure of covered defense telecommunications equipment or services. The
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 14 hours ago

DEADLINE

in 4 days
View Details
NAICS: 336413
New
DIBBS
PANEL, STRUCTURAL, AIThe contract pertains to the procurement of two structural aircraft panels identified by NSN 1560-01-196-4395, with a delivery schedule of 292 days after contract award. The solicitation, issued under number SPE4A7-26-Q-0874, requires strict compliance with multiple Department of Defense and Defense Logistics Agency requirements including Cybersecurity Maturity Model Certification Level 2 for third-party assessors, adherence to DLA packaging standards, and the handling of Covered Defense Information. Technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date or award date depending on the acquisition size. Inspection and acceptance are to occur at the origin, and any non-accepted items must have all government identification removed. Physical marking of the bare item is required, though Item Unique Identification is explicitly waived per the service customer’s direction. Technical data associated with this item is subject to export control under ITAR or EAR, restricting unauthorized disclosures to foreign persons or entities; access is limited to contractors with approved US/Canada Joint Certification Program status, completed DOD export training, and DLA authorization. The contract is administered by the Department of Defense’s ASC Supplier Operations AE and AF Division, with Brian Kurtz as the primary point of contact, and responses are due by August 7, 2026.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 14 hours ago

DEADLINE

in 13 days
View Details
NAICS: 336413
New
DIBBS
GEAR ASSEMBLYThe contract covers the procurement of a gear assembly identified by NSN 1680007833788 under an indefinite-delivery contract with an estimated annual quantity of three units and a maximum contract value of $350,000. Deliveries are to be made FOB origin with zero tolerance for quantity variance, and both inspection and acceptance occur at the supplier’s location. Packaging must comply with ASTM D3951 and MIL-STD-129 for marking, labeling, and palletization in accordance with DLA’s RP001 requirements, with the DLA Master List of Technical and Quality Requirements taking precedence over all other standards. The item must be free from intentional addition of mercury or mercury compounds, except for approved applications such as batteries, fluorescent lights, sensors, weapon systems, or NAVSEA-specified reagents, and any mercury-containing portable devices must be shockproof with a secondary containment per NAVSEA 5100-003D. Inspection and acceptance are governed by MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and attributes are assigned AQLs of 0.1 for critical, 1.0 for major, and 4.0 for minor characteristics. The contractor must implement CMMC Level 2 cybersecurity self-assessment and comply with Safeguarding Covered Defense Information controls as prescribed in DFARS 252.204-7012 and associated clauses. All technical, quality, and procedural requirements are governed by the most current revisions in effect on the solicitation issue date, and any form, fit, or function changes must be reported to the government. The contract is a fixed-price, indefinite-delivery vehicle awarded through a competitive solicitation process with no binding obligation until delivery orders are issued, and invoicing must be submitted via Wide Area WorkFlow. The contractor is required to represent its small business status and socioeconomic classifications, and all materials and processes must align with federal regulations regarding hazardous substances, workforce equal opportunity, trafficking prevention, and payment obligations to small business subcontractors.
MARITIME SUPPLY CHAIN

POSTED

about 14 hours ago

DEADLINE

in 4 days
View Details
NAICS: 336413
New
DIBBS
PLATE, STRUCTURAL, AIThe contract solicitation SPE4A7-26-T-579T calls for the procurement of three structural plates, NSN 1560-01-650-5406, to be delivered to Tinker Air Force Base, Oklahoma, with a 113-day delivery timeline from the solicitation issuance date. The item is governed by a comprehensive set of technical, quality, packaging, and cybersecurity requirements incorporated by reference from the DLA Master List of Technical and Quality Requirements, including specifications for inspection at origin, configuration change management, export control of technical data, and minimum labeling and marking standards per MIL-STD-129. The contract mandates compliance with CMMC Level 2 Self-Assessment and requires safeguarding of Covered Defense Information under DFARS 252.204-7012, with strict limitations on access to export-controlled data restricted to contractors approved under the US/Canada Joint Certification Program and who have completed mandatory DLA training. Packaging must adhere to RP001 DLA Packaging Requirements and ASTM D3951 for non-hazardous materials, with hazardous materials subject to FED-STD-313 and TQ IP025. All shipments must be barcoded and labeled per MIL-STD-129, with FOB origin terms applying, and invoicing must be conducted exclusively through the Wide Area WorkFlow system. The solicitation applies a fixed-price contract structure with inspection and acceptance performed at the manufacturer’s facility, requiring the contractor to maintain a quality management system compliant with ISO 9001:2015 and to ensure zero non-conformances during inspections. Export control obligations under ITAR and EAR are binding, prohibiting unauthorized disclosure to foreign persons, and the contractor must comply with DFARS 252.225-7048 for controlled technical data. Additionally, the contractor must affirm representations regarding employment eligibility, trafficking in persons, hazardous materials, cybersecurity, and compliance with regulations prohibiting procurement from Communist Chinese Military Companies. The contract includes numerous FAR and DFARS clauses covering contractual changes, payment instructions, subcontracting, whistleblower rights, and prohibitions on hexavalent chromium and toxic material handling. The solicitation closes on July 29, 2026, and submissions must be made electronically via DIBBS only, with no physical proposals accepted.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 14 hours ago

DEADLINE

in 4 days
View Details
NAICS: 336413
New
DIBBS
SPOOL, AIR INLET, TESThe contract is for the procurement of nine units of a spool, air inlet, TES, identified by NSN 4920-00-063-3518 and part number 16578, supplied by HASKEL INTERNATIONAL, LLC and AIRLINE HYDRAULICS CORP. The item is classified as a critical application item requiring strict adherence to quality and technical standards referenced in the DLA Master List of Technical and Quality Requirements. Delivery is due within 64 days with no variance in quantity allowed, and the product must be delivered FOB origin to the designated receiving location in Tracy, California. Inspection and acceptance occur at the destination, and packaging must comply fully with MIL-STD-2073-1E, including preservation methods, containment, and marking per MIL-STD-129. Mercury and mercury compounds are strictly prohibited in any part of the product, preservation, packaging, or marking, except for specific authorized functional uses such as batteries or sensors, which must meet additional containment requirements per NAVSEA 5100-003D. The supplier must maintain Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment compliance and follow zero-based sampling standards under MIL-STD-1916 or ASQ H1331, with non-conformances not permitted unless explicitly allowed. All packaging and palletization must align with DLA’s procurement standards, and transportation references are governed by DLAD procedural notes C19 and C20. The contract was issued under solicitation SPE4A5-26-T-292C with a response deadline in July 2026 and a required ship date of March 22, 2026.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 14 hours ago

DEADLINE

in 4 days
View Details
NAICS: 336413
New
DIBBS
RIB, STIFFENER, AIRCRAFTThe contract is for the procurement of one RIB, STIFFENER, AIRCRAFT with NSN 1560-01-579-8147, under solicitation SPE4A7-26-T-576Y, with a response deadline of July 24, 2026, and a required delivery within five days after order award. The item is subject to multiple technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, including packaging standards, physical identification marking, and inspection procedures at origin. Although Item Unique Identification is not mandated by the service customer, DFARS 252.211-7003(c)(1)(i) governs this exclusion. The technical data associated with the component is controlled under ITAR or EAR regulations, prohibiting export or disclosure to foreign persons without prior authorization from the Department of State or Commerce, and applies indiscriminately to foreign nationals within the U.S. and foreign subsidiaries. Access to this controlled data is restricted to contractors approved by DLA, who must hold a valid US/Canada Joint Certification Program certification, complete mandatory export control training, and submit the DLA Export-Controlled Technical Data Questionnaire. The place of performance is Tinker AFB, Oklahoma, and the contracting activity falls under the Department of Defense, specifically the ASC Supplier Oper AE and AF Division, with Sara Duran Campos as the primary point of contact. The NAICS code confirms the industrial classification as aircraft manufacturing, and the solicitation is issued as a federal procurement with no set-aside designation.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 14 hours ago

DEADLINE

in 4 days
View Details
NAICS: 336413
New
DIBBS
SKIN, AIRCRAFTThe contract pertains to the supply of one aircraft skin identified by NSN 1560-01-608-5849, with a delivery deadline of 792 days from award. It mandates strict adherence to current engineering drawings, ensuring that any dimensional discrepancies between the tooling and the drawing are immediately reported to the contracting officer for engineering resolution. The contractor must comply with ISO 9001:2015 quality requirements regardless of manufacturing status and maintain CMMC Level 2 certification as a certified third-party assessment organization, demonstrating robust cybersecurity practices. Physical identification and bare item marking requirements must be fully satisfied, and any contractor-controlled tooling used must produce parts that precisely align with approved specifications. The solicitation, issued by the Department of Defense’s ASC Supplier Oper AE and AF Division, was posted on July 24, 2026, with responses due by August 7, 2026, and is managed by Michael Kershaw, the primary point of contact reachable via phone and email.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 14 hours ago

DEADLINE

in 13 days
View Details
NAICS: 336413
New
DIBBS
CONVERTER, SIGNAL DAThe contract solicitation SPE4A7-26-T-578S is for the procurement of two units of a Converter, Signal Data, identified by NSN 5895124060286 and part number 125773 from GOLDHOFER AIRPORT TECHNOLOGY GMBH, with a delivery schedule of 184 days after contract award, targeting a need ship date of January 25, 2027. The items are to be delivered FOB Origin to the DLA Distribution facility in New Cumberland, Pennsylvania, with zero variance allowed in quantity. Inspection and acceptance occur at the destination, governed by MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, including a special shelf-life marking code 32 indicating a Type I (CODE Z) non-extendable shelf life of 240 months. Packaging must adhere to DLA’s RP001 requirements for palletization, with unit packaging coded as U, controlled drying preservation method 41, and intermediate and unit containers specified as E5. All items must be properly labeled, barcoded, and declared for hazardous materials in compliance with 29 CFR 1910.1200 and DFARS 252.223-7001, alongside submission of required MSDS documents. The contract incorporates numerous FAR and DFARS clauses, including equal opportunity, combating human trafficking, employment eligibility verification, cybersecurity safeguards, data protection, and subcontractor payment acceleration, with the primary inspection and acceptance clause being FAR 52.246-2. Payment must be processed electronically via Wide Area WorkFlow (WAWF) using required documentation such as invoices and receiving reports. The solicitation mandates compliance with the DLA Master List of Technical and Quality Requirements referenced by R or I numbers, and all offerors must provide valid Unique Entity Identifiers and CAGE codes, with representations regarding small business status, socioeconomic programs, and prohibited telecommunications equipment. The contract type is not explicitly stated but is presumed to be firm-fixed-price based on the structure and clauses cited. No pricing data is populated in the CLIN, and final payment terms, accounting codes, and contract administration contacts are to be determined upon award.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 14 hours ago

DEADLINE

in 4 days
View Details
NAICS: 336413
New
DIBBS
HOUSING, CAPACITORThe contract is for the procurement of 18 units of Housing, Capacitor with NSN 1680004947181 under solicitation SPE4A7-26-T-576N, issued by the Air Force Sustainment Center under the Department of Defense. The total contract value is $324.00 at a unit price of $18.000 per unit, with delivery required within 257 days from award date, targeting July 11, 2027. Deliveries are FOB Origin and must be shipped to DLA Distribution San Diego, where inspection and acceptance will occur. Packaging must conform to ASTM D3951 and MIL-STD-129 for marking and labeling, with adherence to DLA Master List of Technical and Quality Requirements taking precedence over all other standards. Bare item marking per RQ017 and palletization per RP001 are mandatory, and all packaging must include proper barcoding with 2D Data Matrix symbols. Sampling for quality assurance follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required for acceptance unless otherwise specified, and attributes are assigned verification levels or AQLs based on criticality. The contractor must comply with cybersecurity requirements including safeguarding covered defense information under DFARS 252.204-7012 and NIST SP 800-171 assessment mandates, with CMMC Level 2 self-assessment required. The contract incorporates numerous FAR and DFARS clauses addressing equal opportunity, trafficking in persons, employment verification, sustainable products, hazard communication, electronic invoicing via WAWF, accelerated payments to small businesses, prohibition of covered defense telecommunications equipment, cybersecurity incident reporting, and whistleblower protections. Offerors must provide a UEI and CAGE code, declare size status and socioeconomic certifications, and affirm compliance with all applicable representations. No attachments are required, and all technical and quality specifications are incorporated by reference from the DLA Master List. The solicitation is electronically submitted via DIBBS with a deadline of July 29, 2026, and award will be based on technically acceptable offerings meeting all requirements, though the specific source selection methodology is not stated.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 14 hours ago

DEADLINE

in 4 days
View Details
NAICS: 336413
New
DIBBS
BRACKET AND SUPPORTThis contract mandates the procurement of a bracket and support item with National Stock Number 1610008870386, manufactured to the technical specifications outlined in TDP Rev C Gen 3 in accordance with Basic Drawing Nr 1X4F3 AMSCBDOC dated 03/07/2007, and must conform to the standard SPE4A6-26-T-05VX. The item is source-controlled and requires that only vendors with access to the limited rights data or direct traceability to approved sources submit quotes, with a Source Approval Request mandatory for any new suppliers. Quality and technical requirements are governed by the DLA Master List of Technical and Quality Requirements, superseding all other standards, and include Cybersecurity Maturity Model Certification Level 2 self-assessment, removal of government identification from non-accepted supplies, physical identification and bare item marking, and compliance with measuring and test equipment standards. The item is classified as a critical application with a non-extendable shelf life of 60 months per RS001 for Type I CODE S items. Sampling must follow MIL-STD-1916, ASQ H1331 Table 1, or a comparable zero-based plan, with verification levels set at VII for critical attributes (AQL 0.1), IV for major (AQL 1.0), and II for minor (AQL 4.0); unspecified attributes are deemed major. Zero non-conformances are required in sample lots if MIL-STD-105/ASQ Z1.4 is used. The manufacturer’s quality system must meet SAE AS9003 or ISO 9001 tailored to AS9003. Packaging must comply with ASTM D3951, but DLA requirements take precedence, and all items must be marked and labeled per MIL-STD-129 with palletization following RP001. The unit of issue is EA, quantity is 12, and the unit price is $12.00, with delivery required FOB Origin to DLA Distribution Jacksonville at Bldg 175 Swan Road, Jacksonville, FL 32212-0103 within 171 days after order award, with a need ship date of January 10, 2027. Inspection and acceptance occur at destination under FAR 52.246-2, and
ASC COMMODITIES DIVISION

POSTED

about 14 hours ago

DEADLINE

in 4 days
View Details
NAICS: 336413
New
DIBBS
HOUSING, LINEAR DIREThe contract pertains to the procurement of a Housing, Linear Directional Valve with part number 5729 and NSN 1650-01-215-2685, for a quantity of three units, to be delivered within 168 days to Hill AFB, Utah. The item is classified as a critical application and must comply with stringent technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, identified by R or I numbers. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances required unless otherwise specified, and verification levels are assigned as VII for critical, IV for major, and II for minor attributes. The contractor, Circor Aerospace, Inc. with CAGE code 50601, is required to adhere to configuration change management procedures and may not remove government identification from non-accepted supplies. Cybersecurity compliance is mandated through a CMMC Level 2 self-assessment. Packaging must meet MIL-STD-2073-1E and marking must comply with MIL-STD-129, with no special marking applied. The product is to be shipped FOB origin with no variance allowed in quantity, and delivery is inspected and accepted at destination. Transportation and shipping instructions reference DLAD Proc Notes C19 and C20, with the delivery address designated for DLA Distribution Depot Hill. The contract was solicited under SPE4A6-26-T-93C8, issued on July 24, 2026, with responses due by July 29, 2026, and the original required delivery date is set for September 29, 2027, with a need ship date of December 9, 2026.
ASC COMMODITIES DIVISION

POSTED

about 14 hours ago

DEADLINE

in 4 days
View Details
NAICS: 336413
New
DIBBS
DOOR, ACCESS, AIRCRAFTThe contract is for the procurement of three aircraft access doors identified by NSN 1560-01-161-4084, issued under solicitation SPE4A7-26-T-577P by the Defense Logistics Agency. The requirement is for delivery within 507 days after award, with responses due by July 24, 2026. Technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date. The item is subject to export control regulations under ITAR or EAR, prohibiting unauthorized disclosure or transfer of technical data to foreign persons, including those within the United States. Contractors must hold US/Canada Joint Certification Program approval, complete mandatory DOD export control training, and receive specific authorization from DLA to handle controlled data. Physical identification of the item is required per RQ017, but Item Unique Identification is not mandated as per the Service customer’s request. Packaging must comply with DLA standards, and government identification must be removed from non-accepted supplies. The place of performance is New Cumberland, Pennsylvania, and inquiries should be directed to Mel Astatike at the provided contact information.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 14 hours ago

DEADLINE

in 4 days
View Details

More opportunities from Department Of Defense → ASC SUPPLIER OPER OEM DIVISION

Same awarding agency

NAICS: 334519
New
DIBBS
GAGE, PRESSURE, DIAL INDThe contract is for the procurement of 13 units of a pressure dial indicating gage, identified by NSN 6685012372558 and manufacturer part number EA24-3PPP-EWB0, under solicitation SPE4A5-26-T-292Y, with a total contract value of $169.000 at $13.000 per unit. Delivery is scheduled for 158 days after the order date, with a required ship date of December 30, 2026, and FOB origin terms. The item must be delivered to the DLA Distribution facility at New Cumberland, Pennsylvania, with inspection and acceptance occurring at the destination. Packaging must strictly comply with MIL-STD-2073-1E and RP001 DLA Packaging Requirements, including preservation method 10 (clng/dry:1), unit container E5, outer protective item M, and pack code U. All items must be marked in accordance with MIL-STD-129, including a special marking code of 05 for delicate instruments and a temporary tag affixed to each unit that displays the contract number, NSN, manufacturer’s part number, and rated accuracy, if available. Mercury and mercury-containing compounds are strictly prohibited in the product, packaging, preservation, and marking, except for functional uses in batteries, fluorescent lamps, instruments, sensors, controls, weapon systems, or chemical analysis reagents specified by NAVSEA; in such cases, portable devices must include a second boundary of containment as per NAVSEA 5100-003D. Sampling and quality acceptance follow MIL-STD-1916 or ASQ H1331 Table 1, using zero non-conformances unless otherwise specified, with critical, major, and minor attributes assigned AQLs of 0.1, 1.0, and 4.0 respectively. Technical and quality requirements referenced by R or I numbers are drawn from the DLA Master List of Technical and Quality Requirements. The contractor must comply with cybersecurity and safeguarding provisions including 252.204-7012 and 252.240-7997, and must use Wide Area WorkFlow (WAWF) for invoicing. Contract clauses cover payment, changes, inspection, default, safeguarding of information, and prohibition of unauthorized obligations, with
Other Measuring and Controlling Device Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 4 days
View Details
NAICS: 334519
New
DIBBS
TRANSDUCER, MOTIONALThe contract pertains to the procurement of three transducers, motional, identified by the NSN part number 6695-01-673-0458, under purchase request 7017409651. The solicitation is issued by the Defense Logistics Agency, a component of the Department of Defense, and is formally referenced by the solicitation number SPE4A5-26-T-277G. The solicitation was posted on July 7, 2026, with a response deadline of July 15, 2026, indicating a narrow window for vendors to submit proposals. The transaction type is classified as a federal solicitation with no specific set-aside provisions designated. Performance location details are not specified, and no point of contact information is provided within the data. The solicitation is accessible through the DIBBS portal, indicating it is part of the Defense Logistics Agency’s official procurement system for sourcing Defense-related equipment.
Other Measuring and Controlling Device Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 4 days
View Details
NAICS: 336413
New
DIBBS
LEVER ASSEMBLY, VARIThe contract pertains to the procurement of a Lever Assembly, Variable Fuel Unit, identified by NSN 1680-00-245-4156 and part number CH618A1076, with a quantity of 28 units to be delivered FOB origin. The item is classified as a critical application item and must comply with stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation issue date or amendment date. Packaging must conform to MIL-STD-2073-1E and MIL-STD-129, with specific packaging codes and methods outlined, including use of BD unit containers and no special marking. Inspection and acceptance occur at the destination, with zero tolerance for non-conformances per sampling requirements under MIL-STD-1916 or equivalent zero-based plans, assigning verification levels VII, IV, and II for critical, major, and minor attributes respectively. Cybersecurity compliance under CMMC Level 2 is required via self-assessment. The item does not require Unique Item Identification per customer request. Delivery is due in 256 days from contract award, with the original required delivery date set for April 8, 2025, and the need ship date of June 7, 2024. The contract is issued under solicitation SPE4A5-26-T-292D, with a unit price of $28.00 and total price of $784.00, and must be shipped to DLA Distribution Depot Hill, Hill AFB, UT 84056-5734, adhering to all DLA packaging and freight procedures.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 4 days
View Details
NAICS: 336411
New
DIBBS
DISK, VALVEThe contract is for the procurement of 14 units of a DISK, VALVE with NSN 1660-01-212-3079 and part number 3171032-1 from Honeywell International Inc., classified as a critical application item. Delivery is required within 182 days after receipt of order, with a need ship date of January 23, 2027, and an original required delivery date of October 14, 2026. The item is to be delivered FOB Origin to the DLA Distribution Depot in Oklahoma City, with no variance allowed in quantity. Inspection and acceptance occur at the manufacturer’s origin site, governed by FAR 52.246-2. The product is not subject to shelf life requirements, and item unique identification is not required per DFARS 252.211-7003(c)(1)(i). Technical and quality requirements are dictated by the DLA Master List of Technical and Quality Requirements referenced by R or I numbers, which supersede all other standards including ASTM D3951. Packaging and labeling must conform strictly to MIL-STD-129 and palletization must follow RP001 DLA Packaging Requirements, with the unit of issue set at EA and quantity per unit pack as specified in the contract. Sampling must adhere to MIL-STD-1916, ASQ H1331 Table 1, or a comparable zero-based sampling plan; manufacturers may optionally use attribute or variable inspection methods under MIL-STD-1916. Acceptance criteria require zero non-conformances in sampled lots even if MIL-STD-105/ASQ Z1.4 is used for lot sizing. Critical, major, and minor attributes must be verified at levels VII, IV, and II respectively, or with AQLs of 0.1, 1.0, and 4.0; unspecified attributes are considered major. The contractor’s quality system must comply with SAE AS9003 or ISO 9001 tailored to AS9003. Cybersecurity requirements include CMMC Level 2 self-assessment and compliance with NIST SP 800-171 DOD assessment requirements, alongside safeguarding covered defense information as per FAR 252.204-7012. The contract mandates electronic submission of payment requests
Aircraft Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 4 days
View Details
NAICS: 334513
New
DIBBS
TRANSDUCER, MOTIONALThe contract is for the procurement of four units of a Transducer, Motional Pickup, identified by NSN 6695016156250, issued as a Fixed Price solicitation under SPE4A5-26-T-293T for a Total Small Business Set-Aside. All deliveries are required FOB Origin and must be completed within 212 days after receipt of order, with a firm delivery date set for February 22, 2027. The item must be delivered to DLA District San Joaquin at 25600 S Chrisman Road, Rec Whse 57, Tracy CA 95304-5000, with inspection and acceptance occurring at the destination. Packaging shall strictly adhere to MIL-STD-2073-1E with specific preservation, wrapping, and container specifications, and marking must comply with MIL-STD-129 including the special marking code "05" designating the item as a delicate instrument. Palletization must follow DLA Packaging Requirements for Procurement, and mercury or mercury compounds are prohibited in all preservation, packaging, and marking processes unless explicitly exempted for functional applications such as batteries, fluorescent lights, or NAVSEA-specified instruments, which must include a secondary containment barrier. Technical and quality requirements are incorporated by reference from the DLA Master List of Technical and Quality Requirements, and sampling for quality verification must follow MIL-STD-1916, ASQ H1331 Table 1, or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II, respectively, or corresponding AQLs of 0.1, 1.0, and 4.0; unspecified attributes are deemed major. Acceptance requires zero non-conformances if MIL-STD-105/ASQ Z1.4 is applied. The contractor is required to submit payment requests electronically through WAWF, using the appropriate documentation based on the fixed-price nature of the line item. The solicitation enforces a broad range of Federal Acquisition Regulation clauses addressing cybersecurity, cyber incident reporting, prohibition of hazardous substances like mercury and hexavalent chromium, export control, trafficking in persons, employment eligibility verification, and compliance with NIST SP 800-171. The contractor must also validate all representations in the System for Award Management and comply with requirements to inform employees of
Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables

POSTED

about 14 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332510
New
DIBBS
SPACER, SLEEVEThe contract pertains to the procurement of 23 units of a spacer sleeve with part number 713384-14 and NSN 5365-00-480-7308, issued under solicitation SPE4A5-26-T-307X by the Department of Defense’s ASC SUPPLIER OPER OEM DIVISION. Delivery is required within 20 days FOB origin with no tolerance for quantity variance, and both inspection and acceptance occur at the origin point. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, accessible online, with applicable revisions determined by the solicitation or award date depending on acquisition size. Cybersecurity compliance requires a CMMC Level 2 Self-Assessment, and all packaging must adhere to MIL-STD-2073-1E and MIL-STD-129 marking standards with no special marking codes. Packaging must also comply with DLA’s packaging requirements, including palletization and unit configuration, with the item packaged in a blister pack using preservative methods designated as 10, dry, and no cushioning or desiccant. Sampling protocols follow MIL-STD-1916 or ASQ H1331 with zero nonconformances required unless otherwise specified, and attributes are assigned verification levels VII, IV, and II for critical, major, and minor characteristics respectively. Item Unique Identification is not mandated per service customer direction, and government identification must be removed from non-accepted supplies. Measuring and test equipment must be calibrated and traceable. The unit of issue is each, and the NAICS code is 332510. Contract performance is overseen by Rasulbek Kilichev, with response deadlines set for July 31, 2026.
Hardware Manufacturing

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 336412
New
DIBBS
VANE, COMPRESSOR, AIROfferors submitting quotes for solicitation SPE4A5-26-T-307K must adhere to strict compliance requirements including prohibitions on providing covered telecommunications equipment or services as defined under FAR 52.204-24 and DFARS 252.204-7016. Domestic content restrictions under the Berry Amendment and Buy American Act apply, with the Berry Amendment threshold now set at $150,000, requiring vendors to disclose any non-domestic materials and reference specific clauses DFARS 252.225-7006, 252.225-7012, and 252.225-7015. Small business joint ventures must provide certifications for designated categories including small business, service-disabled veteran-owned, women-owned, economically disadvantaged women-owned, and historically underutilized business zone status. Quotes must not include items produced via additive manufacturing unless prior approval is granted by the contracting officer. Offerors are strongly encouraged to submit quantity ranges due to fluctuating demand on open purchase requests, allowing buyers flexibility in combining or adjusting requirements without resolicitation. Fast Pay is not available for this solicitation. All vendors must register via DLA’s Account Management & Provisioning System to access the Vendor Shipment Module, and those using VSM WebServices must update their internal schema by the required deadline to maintain shipping capability. Offerors unable to quote by the closing date must submit a “No Bid” on DIBBS with an anticipated quote date or reason for non-submission to avoid assumptions of non-responsiveness. The item under solicitation is a VANE, COMPRESSOR, AIR with NSN 2840-01-655-1420, quantity of two units, due for delivery within five days of award, with primary point of contact Brandy Coward at brandy.coward@dla.mil. APEX Accelerators offer free assistance to businesses seeking to compete for government contracts.
Aircraft Engine and Engine Parts Manufacturing

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 334511
New
DIBBS
INCLINOMETER, AIRCRAThe contract specifies the procurement of six aircraft inclinometers, identified by NSN 6610014932401 and part number 8528177-901, supplied by Honeywell International Inc. and Aero International LLC under solicitation SPE4A5-26-T-307A. The requirement is for delivery within 169 days to Robins Air Force Base, Georgia, with FOB origin terms and no tolerance for quantity variance. Inspection and acceptance occur at destination, and packaging must comply with MIL-STD-2073-1E and DLA packaging standards, including MIL-STD-129 marking with the fragile designation. Unit of issue is each, priced at $6.00 per unit, totaling $36.00. The inclinometers are subject to technical and quality requirements referenced from the DLA Master List, tailored higher-level quality provisions, and measuring and test equipment standards. Sampling follows MIL-STD-1916 or comparable zero-based plans, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Cybersecurity maturity model certification level 2 self-assessment is required, and physical identification markings must be applied per RQ017. Item unique identification is waived per customer request. The contract enforces removal of government identification from non-accepted supplies and includes provisions for covered defense information. Delivery is due by January 17, 2027, with the original required delivery date set for July 11, 2027. All transportation logistics are governed by specific DLA procedural notes.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 336413
New
DIBBS
LCD ASSY, AIRCRAFT, MThe contract pertains to the procurement of seven LCD assemblies for aircraft (NSN 1680015514353, P/N 8531136-901) under solicitation SPE4A5-26-T-291G, awarded to Honeywell International Inc., with a total value of $49.00 and a delivery schedule of 235 days after order placement, with a need ship date of March 16, 2027 and original delivery date of April 14, 2027. Deliveries are to be made FOB origin to the DLA Distribution facility in New Cumberland, Pennsylvania, with inspection and acceptance occurring at the destination. Packaging must comply with MIL-STD-2073-1E and DLA-specific packaging requirements, including preservation method 41 under cold/dry conditions, and marking must adhere to MIL-STD-129 with no special markings required; physical bare item marking is mandatory per RQ017, but Item Unique Identification is not required under DFARS 252.211-7003(c)(1)(i). Quality assurance requires sampling in accordance with MIL-STD-1916 or ASQ H1331, Table 1, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively, and zero non-conformances expected in the sample lot unless otherwise specified. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, and configuration changes must be managed through formal Engineering Change Proposal and variance request processes. The contract includes cybersecurity requirements mandating a CMMC Level 2 self-assessment and safeguarding of covered contractor information systems under FAR 52.240-93 with deviation 2026-00038. Hazardous materials must be labeled per OSHA HazCom 29 CFR 1910.1200, and maritime transportation, if used, must comply with DFARS 252.247-7023, requiring notification and documentation for any use of foreign-flag vessels. Invoicing must be conducted via WAWF, and administrative provisions include Small Business Program Representation, accelerated payments to small business subcontractors, and prohibitions
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

1 day ago

DEADLINE

in 3 days
View Details
NAICS: 339991
New
DIBBS
GASKETThis contract is for the procurement of a gasket identified by NSN 5330-01-342-7302 and part number 46-1444-1 from Grimes Aerospace Company, with a quantity of 16 units to be delivered FOB origin within 169 days, with no variance allowed in quantity. The item is classified as a commercial item, and item unique identification is not required per the Service customer’s request. The gasket must be packaged and sealed in a medium-duty, waterproof, greaseproof, opaque bag conforming to MIL-DTL-117, Type II, Class C, Style 1, specifically to protect against ultraviolet degradation, a requirement applicable to direct vendor delivery, foreign military sales, and stock shipments. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129 without special markings, and palletization must comply with DLA packaging requirements. Inspection and acceptance occur at the destination, and sampling follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, with critical, major, and minor attributes assigned verification levels VII, IV, and II respectively. The contract incorporates technical and quality requirements referenced by R or I numbers from the DLA Master List, and all commercial and logistical details align with DoD standards including the use of authorized unit of issue and federal supply classifications. The delivery address is the DLA Distribution New Cumberland Facility, and the contract was issued via solicitation SPE4A5-26-T-306K with a response deadline of July 31, 2026, and a required ship date of January 17, 2027.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

1 day ago

DEADLINE

in 6 days
View Details