Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 2 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

FAIRLEAD, TUBULAR

Active
SPE8EE-26-T-2405Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This solicitation, issued by the Department of Defense under solicitation number SPE8EE-26-T-2405, is for the procurement of 26 tubular fairleads identified by NSN 5342-01-603-0160. The contract requires delivery within 66 days after the order is placed and falls under NAICS code 333923. Performance is designated for New Cumberland, Pennsylvania, with Philip Ferrara serving as the primary point of contact. The agreement incorporates several critical technical and quality requirements from the DLA Master List, including specific packaging standards and documentation for source approval requests. It also mandates the removal of government identification from any non-accepted supplies and notes that regulations regarding covered defense information may apply. Responses to this solicitation are due by September 8, 2026.

General Info

DoD solicitation SPE8EE-26-T-2405 for 26 tubular fairleads due September 8, 2026.

Agency

Department Of Defense → CONSTRUCTION & EQUIPMENT MANU & CONView Agency

NAICS

333923 - Overhead Traveling Crane, Hoist, and Monorail System ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

(1)

SPE8EE-26-T-2405.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → CONSTRUCTION & EQUIPMENT MANU & CON
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → CONSTRUCTION & EQUIPMENT MANU & CON
View Agency Profile
Office AddressUSA
Contacts
Philip Ferrara
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
FAIRLEAD,TUBULAR
FAIRLEAD, TUBULAR
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
ADEQUATE DATA FOR NSN/Part Number: 5342-01-603-0160 Quantity: 26 EA Purchase Request: 7018047030QTY: 26 Delivery: 66 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 333923
New
DIBBS
HOIST, CHAIN
Solicitation # SPE8EE-26-T-2318
This contract is for the procurement of two chain hoists with a 4,000 lb capacity and a 20 ft lift. The only acceptable part is Columbus McKinnon Corp P/N 2233, which is a 2 ton hoist with a 20 ft lift. The items are identified by NSN 3950-01-440-9557 and must be delivered within 20 days after the order is received. The agreement mandates strict adherence to DLA packaging requirements, specifically ASTM D3951 and MIL-STD-129, with palletization following RP001. It prohibits the intentional addition of mercury or mercury-containing compounds except in specific functional cases approved by NAVSEA. Delivery is FOB destination to the USNS Supply T AOE 6, and shipments must be made via traceable means rather than parcel post.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 4 hours ago

DEADLINE

in 2 days
View Details
NAICS: 333923
New
DIBBS
SLING AND WIRE ROPE
Solicitation # SPE8EE-26-T-2408
This contract, solicitation number SPE8EE-26-T-2408, is for the procurement of 14 units of sling and wire rope under NSN 3940-01-599-9516. The delivery requirement is set for 117 days after the order is placed. The procurement is managed by the Department of Defense through the Defense Logistics Agency and is subject to specific technical and quality requirements found in the DLA master list. Compliance requirements include adherence to DLA packaging standards, CMMC Level 2 self-assessment, and the protection of covered defense information. Quality assurance must follow MIL-STD-1916 or ASQ H1331 sampling methods, with a focus on zero non-conformance for acceptance. Additionally, the contract contains technical data subject to ITAR or EAR export controls, requiring contractors to have approved JCP certification and completed specific DOD export-control training to access restricted data.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 333923
New
DIBBS
CRANE, OVERHEAD TRAV
Solicitation # SPE8EE-26-T-2407
This contract is for the procurement of one overhead traveling crane, identified by NSN 3950016852395 and part number H90-3-12/24 from The Caldwell Group, Inc. The agreement is managed by the Department of Defense under solicitation number SPE8EE-26-T-2407, with a required delivery date of August 21, 2024, and a delivery window of 20 days after the order. The shipment is designated as FOB Origin with inspection and acceptance occurring at the destination in Tucson, Arizona. Compliance is required for several technical and quality standards, including DLA packaging requirements, MIL-STD-129 for marking and labeling, and ASTM D3951 for packaging. The contract specifically mandates that shipping be conducted via traceable means rather than parcel post.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details
NAICS: 333923
New
DIBBS
SPREADER, SLING
Solicitation # SPE8EE-26-T-2323
This solicitation, identified as SPE8EE-26-T-2323, is issued by the Department of Defense for the procurement of 260 units of sling spreaders under NSN 3940-01-643-8661. The contract requires delivery within 124 days after receipt of order and is categorized under NAICS code 333923. Performance is slated for New Cumberland, Pennsylvania, with a response deadline of August 24, 2026. The agreement mandates strict adherence to several regulatory and technical standards. Key requirements include CMMC Level 2 certification for third-party assessment and compliance with DLA packaging and government identification removal protocols. Furthermore, the contract is subject to rigorous export controls under ITAR and EAR regulations, requiring contractors to have an approved US/Canada Joint Certification Program certification and completed Department of Defense export-controlled technical data training to access sensitive information.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 4 hours ago

DEADLINE

in 2 days
View Details
NAICS: 333923
New
Federal
ALUMINUM DAVIT
Solicitation # N5005426Q0177
The Mid-Atlantic Regional Maintenance Center under the Department of Defense is seeking responses from qualified sources for the procurement of new aluminum davits under solicitation number N5005426Q0177. This combined synopsis and solicitation is conducted using Simplified Acquisition Procedures in accordance with FAR Part 13 and FAR 12.6, incorporating provisions through FAC 2026-01 and DFARS Change notice 20260507. All provided parts must be new, as refurbished or used components will not be accepted. The opportunity is categorized under NAICS code 333923 and is managed by the office located in Norfolk, Virginia. Interested parties must submit their responses by the deadline of September 2, 2026, at 2:00 PM. The procurement process involves compliance with military critical technical data agreements and may require registration through the DLA Joint Certification Program portal to ensure adherence to export control laws and security certifications.
Mid Atlantic Reg Maintenance Ctr

POSTED

about 9 hours ago

DEADLINE

in 7 days
View Details
NAICS: 333923
New
Federal
Fall Restraint
Solicitation # W50S7G26QA024
The 139th Airlift Wing in St. Joseph, Missouri, is seeking quotes for the installation and inspection of two overhead rigid rail fall arrest systems in the R11 Bay and Fire Truck Bay. The scope of work also includes a comprehensive annual inspection and an Engineering Design Review for existing systems located in the Fuel Cell and Newlon hangars. This opportunity is a 100 percent small business set-aside under NAICS code 333923. A pre-quotation conference and site visit are scheduled for September 3, 2026, at 0900 local time. Interested parties must register and complete a police records check by August 28, 2026, and provide REAL-ID compliant identification for base access. All quotes must be submitted by 1300 on September 11, 2026.
W7NJ Uspfo Activity Moang 139

POSTED

1 day ago

DEADLINE

in 16 days
View Details
NAICS: 333923
New
Federal
Mobile Marine Crane Manufacturing & SupplyThis subcontract opportunity, issued by the Department of Defense through the W076 Endist Middle East office, involves the manufacturing and supply of a mobile marine crane. The equipment must feature a minimum lift capacity of 150 metric tons and the specific ability to hoist 40 metric tons at a 12-meter radius. The provider is required to supply all necessary technical documentation and ensure the crane complies with international maritime standards. The solicitation is categorized under NAICS code 333923. Interested parties must submit their responses by the deadline of September 22, 2026, at 14:00 UTC.
W076 Endist Middle Eas(provis)

POSTED

2 days ago

DEADLINE

in 27 days
View Details
NAICS: 333923
New
Federal
15-Ton Bridge Crane
Solicitation # N4523A26Q0202
The Puget Sound Naval Shipyard and Intermediate Maintenance Facility is conducting market research to identify capable vendors for the procurement, design, shop testing, and installation of a new 15-ton bridge crane at the TRF-Bangor location, along with the complete breakdown, removal, and scrapping of the existing crane. The requirement must comply with NAVFAC P-307 standards, and detailed specifications are outlined in the attached Statement of Work. The government anticipates all work to be completed by the third quarter of fiscal year 2028 and is considering whether to set aside the contract for small businesses or pursue full and open competition, with a single award anticipated. The NAICS code is 333923 with a small business size standard of 1,250 employees, and the product service code is 3950. Businesses of all sizes are encouraged to respond, though no formal solicitation has been issued and this notice does not constitute a commitment or guarantee of future procurement. Responses must include the organization’s name, CAGE code, and Unique Entity ID number, and may include supporting capability materials. Submissions are to be sent via email with the subject line “Sources Sought Response for N4523A26Q0202” to the designated government contacts before the deadline of August 11, 2026. All information submitted will be treated as voluntary and proprietary, protected from external release, and will not be returned. No funding is available for response preparation, and failure to respond does not preclude future participation in an official solicitation, which will be posted on the Government-Wide Point of Entry if issued. The government will not provide evaluations or feedback on responses, which will be used solely for planning and procurement strategy development.
Puget Sound Naval Shipyard IMF

POSTED

2 days ago

DEADLINE

in 14 days
View Details
NAICS: 333923
New
Federal
Marine Crane Procurement and Installation, Port of Aqaba, Jordan
Solicitation # A049239
The U.S. Army Corps of Engineers has issued a Sources Sought notice for the procurement and installation of marine cranes at the Port of Aqaba, Jordan. This information-gathering effort is designed to assess industry interest, capabilities, and qualifications to ensure adequate competition for future requirements. The government is seeking detailed capabilities statements that demonstrate existing expertise or developed plans related to the specified project scope. While companies may include commercial brochures or marketing materials, this notice is for planning purposes only and does not constitute a formal request for proposal or a commitment to any specific acquisition approach. Interested firms must submit their responses via email to the designated points of contact no later than 1000 hours Eastern Daylight Time on September 22, 2026. Hard copies will not be accepted. Participation in this process is not a prerequisite for future bidding, but it provides the government with the opportunity to tailor requirements to align with current industry capabilities. Respondents should note that the government will not provide notification regarding the results of the evaluation and will not provide compensation for information submitted.
W076 Endist Middle Eas(provis)

POSTED

2 days ago

DEADLINE

in 27 days
View Details
NAICS: 333923
New
SLED
This specification describes a hydraulically actuated packer body with a mechanical lifting device capable of handling 30 to 100 gallon refuse containers. The body shall be capable of compacting and transporting refuse to a landfill or transfer station
Solicitation # 1479-20260812132606 Belmont
This solicitation, issued by the Mississippi agency MPTAP under solicitation number 1479-20260812132606 Belmont, calls for the procurement of a hydraulically actuated packer body equipped with a mechanical lifting device. The equipment is specifically designed to manage refuse containers ranging from 30 to 100 gallons and must be capable of both compacting and transporting waste to landfills or transfer stations. The procurement process is managed by the state of Mississippi, with the performance of the contract taking place within the state. Interested parties must submit their responses by the deadline of September 4, 2026, at 6:00 PM UTC. This solicitation was officially posted on August 20, 2026, and serves as a formal request for specialized waste management machinery.
MPTAP

POSTED

6 days ago

DEADLINE

in 9 days
View Details
NAICS: 333923
New
Federal
5 Ton Bridge Crane
Solicitation # W911KF26QA049
The Army Contracting Command-Detroit, Anniston Army Depot, has issued solicitation W911KF26QA049 for the procurement and installation of one 5-ton top-running, single-girder bridge crane in Building 129 at the Anniston Army Depot in Alabama. This fixed-price requirement is a Small Business Set-Aside under NAICS code 333923 and is intended to replace an existing unit used to support the 850-transmission test stand. The contractor is responsible for the design, construction, and installation of a safety yellow crane that meets CMAA moderate service requirements and complies with OSHA, ANSI, NFPA, NEC, and AWS standards. Key deliverables include the physical crane system and comprehensive documentation, consisting of four printed and one electronic copy of all operator manuals, maintenance manuals, and spare parts lists. The government will utilize a Lowest Price Technically Acceptable (LPTA) source selection process, evaluating proposals on a met/not met basis regarding technical requirements and the lowest evaluated price. Bidders must submit technical literature demonstrating compliance with all specifications; failure to provide this documentation will result in a determination of unacceptable. The installation must be completed and the equipment operational within 60 calendar days of the work commencement. Contractors must be registered in the System for Award Management (SAM), submit proposals electronically via the Procurement Integrated Enterprise Environment (PIEE), and adhere to strict safety and security protocols, including Anti-Terrorism Level I training and the provision of site-specific safety plans. All items must meet specific marking and identification standards, including Unique Item Identification (UID) and manufacturer nameplates.
W6QK Acc Anad

POSTED

6 days ago

DEADLINE

in 8 days
View Details
NAICS: 333923
New
Federal
N6449826Q00380002
Solicitation # N6449826Q00380002
This amendment to solicitation N6449826Q00380002, issued by the Naval Surface Warfare Center Philadelphia Division, serves to correct the Lowest Price Technically Acceptable (LPTA) capacity for CLIN 0007 within Section A and the Statement of Work. As a direct consequence of this correction, the response deadline has been officially extended to August 27, 2026. All other existing terms and conditions of the original solicitation remain in full effect. The procurement is designated as a total Small Business Set-Aside under NAICS code 333923, with the place of performance located in Philadelphia, Pennsylvania. Interested parties can access the full solicitation and all supporting documentation through the PIEE solicitation module. Primary points of contact for this requirement include David Torres and Anthony Diplacido.
Nswc Philadelphia Division

POSTED

6 days ago

DEADLINE

in about 24 hours
View Details

More opportunities from Department Of Defense → CONSTRUCTION & EQUIPMENT MANU & CON

Same awarding agency

NAICS: 333914
New
DIBBS
REEL ASSEMBLY, STATI
Solicitation # SPE8EE-26-T-2320
This contract, identified as SPE8EE-26-T-2320, is for the procurement of one static reel assembly, part number 122081-319 from Hydraulics International, Inc. The item is identified by NSN 4930-01-630-5795 and is subject to a delivery timeline of 10 days after order. The shipment is destined for the US Army at Fort Bliss, Texas, with a required delivery date of August 6, 2026. The agreement mandates strict adherence to DLA technical and quality requirements, including RP001 for packaging and MIL-STD-129 for marking and labeling. Packaging must comply with ASTM D3951, though DLA master list requirements take precedence. Inspection and acceptance will occur at the destination, and the shipment must be sent via the fastest traceable means, specifically excluding parcel post.
Measuring, Dispensing, and Other Pumping Equipment Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332312
New
DIBBS
NON-NSN ITEM
Solicitation # SPE8EE-26-T-2406
This contract, identified as SPE8EE-26-T-2406, is a procurement agreement between the Department of Defense and TW Metals, Inc. (dba Oneal Flat Rolled Metals LLC) for the supply of five units of commercial hardware, specifically part number 9515-1.25TK4X846100CL1ARMOR. The order is managed under purchase request 7018024957 and requires delivery to the Anniston Army Depot in Alabama. The terms specify a delivery timeframe of five days after receipt of order, with an original required delivery date of August 24, 2026. Shipping must be handled via the fastest traceable means, excluding parcel post, with FOB destination for both inspection and acceptance. Packaging must comply with ASTM D3951 and MIL-STD-129, while palletization must adhere to DLA packaging requirements for procurement.
Fabricated Structural Metal Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 6 days
View Details
NAICS: 336413
New
DIBBS
PAD, BEARING
Solicitation # SPE8EF-26-T-1615
This contract, identified as SPE8EF-26-T-1615, is a solicitation for the procurement of one bearing pad, part number 259C327-13, with NSN 1730-01-245-9996. The order is issued by the Department of Defense and requires delivery to JBSA Lackland, Texas, with a required delivery date of August 12, 2026, and a delivery window of five days after the order is placed. The agreement mandates strict adherence to several regulatory and technical standards, including CMMC Level 2 self-assessment and the protection of covered defense information. Packaging must comply with ASTM D3951, MIL-STD-129, and DLA packaging requirements. The contract specifies that inspection and acceptance will occur at the destination, and shipments must be sent via the fastest traceable means rather than parcel post.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 2 days
View Details
NAICS: 336413
New
DIBBS
SPINDLE, WHEEL
Solicitation # SPE8EF-26-T-1627
This solicitation, issued by the Department of Defense under the Defense Logistics Agency, is for the procurement of 19 rear wheel spindles identified by NSN 1730-00-568-0653. The contract requires delivery within 63 days after the order is placed and is managed under solicitation number SPE8EF-26-T-1627. Performance is located in Tracy, California, and the procurement falls under NAICS code 336413. The contract is subject to stringent technical and quality requirements, including DLA packaging standards, physical item marking, and the removal of government identification from non-accepted supplies. Notably, the item contains technical data governed by ITAR and EAR export controls, requiring contractors to have an approved US/Canada Joint Certification Program certification and completed export-control training. Additionally, the contract mandates compliance with Covered Defense Information and CMMC Level 2 certification standards.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 2 days
View Details
NAICS: 336413
New
DIBBS
PAD, HOIST ADAPTER, G
Solicitation # SPE8EF-26-T-1623
This solicitation, issued by the Department of Defense under the Defense Logistics Agency, is for the procurement of three hoist adapter pads, identified by NSN 1730-01-129-3576. The contract requires a rapid delivery turnaround of five days after the order is received. Technical and quality standards are governed by the DLA Master List, and the procurement falls under NAICS code 336413. The contract includes strict security and compliance mandates, including CMMC Level 2 certification and adherence to covered defense information protocols. Because the item involves technical data subject to ITAR or EAR export controls, contractors must have an approved US/Canada Joint Certification Program certification and complete specific DLA export-controlled training to access the necessary data. Additional requirements include specific DLA packaging standards and the removal of government identification from any non-accepted supplies.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 2 days
View Details
NAICS: 336413
New
DIBBS
HEAD, TOWBAR
Solicitation # SPE8EF-26-T-1637
This solicitation, issued by the Department of Defense under solicitation number SPE8EF-26-T-1637, is for the procurement of one towbar head, identified by NSN 1730-00-401-7143. The contract requires delivery within 20 days after receipt of order, with the place of performance located at Whiteman Air Force Base. A critical component of this contract is the strict adherence to export control regulations. The technical data associated with this item is subject to ITAR or EAR restrictions, meaning it cannot be exported or disclosed to foreign nationals without prior authorization from the Department of State or Department of Commerce. To access this data, contractors must hold an approved US/Canada Joint Certification Program certification and complete specific DLA training and questionnaires.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 2 days
View Details
NAICS: 336413
New
DIBBS
LOCK, AIRCRAFT GROUN
Solicitation # SPE8EF-26-T-1630
This solicitation, issued by the Department of Defense under the Defense Logistics Agency, is for the procurement of 207 aircraft ground safety locks, identified by NSN 1730-00-927-5079. The contract requires delivery within 124 days after the order is placed, with the place of performance located at Robins Air Force Base. The solicitation number is SPE8EF-26-T-1630, and the response deadline is August 24, 2026. The contract is subject to strict technical and quality requirements, including specific DLA packaging and marking standards. It involves covered defense information and requires CMMC Level 2 certification. Furthermore, the technical data is subject to export controls under ITAR or EAR regulations, meaning contractors must have an approved US/Canada Joint Certification Program certification and complete mandatory training to access the data.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 2 days
View Details
NAICS: 314994
New
DIBBS
FIBER ROPE ASSEMBLY
Solicitation # SPE8EE-26-T-2409
This solicitation, issued by the Department of Defense under the Defense Logistics Agency, is for the procurement of 55 units of Fiber Rope Assembly, identified by NSN 4020-01-676-8789. The contract requires delivery within 117 days after the order is placed and specifies performance in New Cumberland, Pennsylvania. Technical and quality requirements are governed by the DLA Master List, with specific mandates for packaging and the removal of government identification from non-accepted supplies. The procurement is subject to strict export controls under ITAR and EAR regulations, meaning technical data cannot be exported or disclosed to foreign nationals without prior authorization from the Department of State or Commerce. Access to this data is limited to contractors with an approved US/Canada Joint Certification Program certification and completed training. Interested parties must respond by September 8, 2026, and can coordinate with the primary point of contact, Philip Ferrara.
Rope, Cordage, Twine, Tire Cord, and Tire Fabric Mills

POSTED

about 4 hours ago

DEADLINE

in 13 days
View Details