Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Fast Single Photon Detector Supply

Active
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the supply of a high-sensitivity, low-noise Fast Single Photon Detector specifically designed for quantum optics experiments that demand precise timing detection of individual photons. This equipment is critical for experiments requiring high temporal resolution and minimal detection noise, ensuring accurate data acquisition in advanced quantum research applications. The requirement is issued as a subcontract under a Small Business Set Aside, fully reserved for small businesses, with the NAICS code 334516 indicating classification under other electronic component manufacturing. The place of performance is designated as the USAF Academy with a zip code of 80840, indicating the primary location where the detector will be deployed and utilized. The solicitation was posted on August 9, 2026, with a strict response deadline of August 14, 2026, at 8:00 PM, allowing a limited window for qualified small businesses to submit proposals. The contracting agency is the Department of Defense under the office FA7000 10 Cons Lgc, signifying a defense-related research and development initiative focused on next-generation photon detection technologies.

General Info

Small business subcontract for high-sensitivity photon detector at USAF Academy, due August 14, 2026.

Agency

Department Of Defense → FA7000 10 Cons LgcView Agency

NAICS

334516 - Analytical Laboratory Instrument ManufacturingView NAICS

Place of Performance

USAF Academy, CO, 80840, USA

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

Posted

subcontract

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → FA7000 10 Cons Lgc
ContactsNo contacts available
OfficeN/A
Organization / Agency
Department Of Defense → FA7000 10 Cons Lgc
View Agency Profile
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Supply of a high-sensitivity, low-noise Fast Single Photon Detector for quantum optics experiments requiring precise photon timing detection.

Similar Contracts

Same NAICS industry code

NAICS: 334516
New
DIBBS
Supply of Current Sensor (NSN: 6625016518787)The contract entails the procurement and delivery of 13 military-grade current sensors identified by NSN 6625016518787, with strict adherence to MIL-STD-2073-1E packaging standards and DLA RP001 palletization requirements to ensure compatibility with Department of Defense logistics and handling protocols. The equipment is intended for operational use within the maritime supply chain and must meet rigorous performance and durability specifications typical of military-grade components. The solicitation was posted on August 9, 2026, with responses due by August 20, 2026, and is structured as a subcontract under NAICS code 334516, which classifies the manufacturing of electromagnetic and other electrical equipment. Performance of this contract is designated to occur in New Cumberland, Pennsylvania, with a zip code of 17070-5002, indicating the primary location for fulfillment or delivery. The contract is managed by the Department of Defense through its Maritime Supply Chain organization, though no specific point of contact or set-aside status is provided, implying it may be open to general industry participation. The associated DIBBS RFQ link serves as the official portal for submission and further details, and all deliverables must comply with federal defense standards to ensure seamless integration into existing military systems and supply chains.
MARITIME SUPPLY CHAIN

POSTED

about 20 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334516
New
DIBBS
DETECTOR, GAS
Solicitation # SPE7M1-26-T-268E
This contract specifies the procurement of a gas detector, identified by NSN 6665-01-609-1302, with a quantity of two units to be delivered within 20 days under solicitation SPE7M1-26-T-268E. The item is designated as a critical application item with a non-extendable shelf life of 12 months, classified as Type II, and must comply with all applicable DLA packaging and technical requirements, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Mercury and mercury-containing compounds are strictly prohibited except in functional applications such as batteries, fluorescent lamps, and specified instruments, with portable devices requiring shock-proof construction and secondary containment per NAVSEA 5100-003D. The detector must be delivered FOB origin with zero variance in quantity and inspected and accepted at the destination. Packaging must adhere to DLA’s procurement standards, including palletization and special marking code 33 for shelf-life compliance. Hazardous material shipping requirements are governed by IP025 and DLAD procedural notes C19 and C20. The delivery address is Misawa Air Base, Japan, and the original required delivery date is August 10, 2026. The contract follows DoD unit of issue standards and incorporates technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements.
MARITIME SUPPLY CHAIN

POSTED

about 20 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334516
New
DIBBS
MEASURING TUBE, GAS ANA
Solicitation # SPE2DH-26-T-5878
The measuring tube for gas analyzer, designated NSN 6630-12-189-3126, is a glass tube with melted tips designed to measure carbon dioxide content in compressed gases within a range of 100 to 3000 parts per million for one liter of air. It is supplied in packages of ten units per PG and is intended for medical use under strict packaging and handling standards. The item must be commercially packaged in sealed unit containers that protect against damage and breakage, and shipped in exterior containers suitable for safe delivery at the lowest freight rate to the specified point of delivery. All packaging and labeling must adhere to Medical Marking Standard No. 1, replacing all references to MIL-STD-129, with labels clearly indicating the date of manufacture, expiration date, contract number, and lot number in compliance with MMS1C. This item has a non-extendable shelf life of 24 months, with no more than three months allowed to have elapsed from the date of manufacture to the date of government delivery. The procurement is governed by technical and quality requirements specified in the DLA Master List of Technical and Quality Requirements under solicitation number SPE2DH-26-T-5878, and covers defense information as per RD003. Packaging must comply with DLA packaging requirements, and government identification must be removed from non-accepted supplies. The solicitation was posted on August 9, 2026, with a response deadline of August 17, 2026, and includes a requirement for delivery within 20 days of award. The contract is managed by the Department of Defense under the Medical Supply Chain FSH, with Tina Vu as the primary point of contact.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 20 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334516
New
Federal
USAFA: Quantum Demonstration/Experiment System
Solicitation # FA700026Q0057
The United States Air Force Academy, through the Department of Defense, is soliciting proposals for the procurement of a Quantum Demonstration/Experiment System designed for use by the Physics Department and the Laser and Optics Research Center. The system must include a Time Correlation / Time Tagging (TCSPC) system and a Fast Single Photon Detector, both of which must fully comply with the technical specifications outlined in Attachment 1. This solicitation is issued as a combined synopsis and request for proposals under the small business set-aside program, exclusively available to small businesses, and is classified under NAICS code 334516. The opportunity is open for responses until August 14, 2026, with proposals due by 8:00 PM Eastern Time, and all work is to be performed at the USAFA campus in Colorado Springs, Colorado. The contracting office is located at USAFA, Colorado, 80840-2303, and can be reached through primary point of contact Dawson Hopkinson via email at dawson.hopkinson@us.af.mil, with secondary contact Kenneth Helgeson available at 719-338-5503 or kenneth.helgeson.3@us.af.mil for additional inquiries. The solicitation number is FA700026Q0057, and all details, including technical requirements and submission procedures, are contained within the attached documents. The full solicitation is accessible via the SAM.gov public portal for interested vendors to review the complete scope and conditions governing the procurement.
FA7000 10 Cons Lgc

POSTED

1 day ago

DEADLINE

in 4 days
View Details
NAICS: 334516
New
Federal
Precision Ion Mill Design and ManufacturingThe contract specifies the full design, engineering, and manufacturing of a precision ion mill system tailored for transmission electron microscopy specimen preparation using focused ion beam sputtering. The system must meet stringent technical requirements to enable high-resolution, low-damage sample preparation essential for advanced materials characterization. This is a subcontract under the Department of Commerce, National Institute of Standards and Technology, with performance expected to take place in Boulder, Colorado, and all work must comply with the applicable standards for precision instrument fabrication. The solicitation was posted on August 8, 2026, and responses are due by August 20, 2026, with the NAICS code 334516 indicating classification under semiconductor and other electronic component manufacturing. The contractor is expected to deliver a fully integrated, turnkey system capable of precise ion beam control, uniform material removal, and minimal specimen contamination. The project requires demonstrated expertise in ion beam technology, vacuum system engineering, and alignment of sensitive electron microscopy components. All designs must accommodate future upgrades and include comprehensive documentation for operation, maintenance, and calibration. While specific financial terms and performance milestones are not detailed in the provided data, the nature of the work suggests a high-value, technically rigorous engagement requiring a qualified vendor with prior experience in similar scientific instrumentation development.
Department Of Commerce Nist

POSTED

2 days ago

DEADLINE

in 10 days
View Details

More opportunities from Department Of Defense → FA7000 10 Cons Lgc

Same awarding agency

NAICS: 333992
New
Federal
Cryogenic Integration and Thermal ManagementThe contract requires the engineering and supply of specialized cryogenic interface components designed to maintain thermal stability and minimize drift in the ENDOR resonator under low-temperature operating conditions. These components are critical to ensuring precise performance of the resonator in environments where temperature fluctuations could compromise experimental accuracy and system reliability. The work involves advanced thermal management solutions tailored for cryogenic applications, with an emphasis on materials and designs that sustain structural integrity and thermal consistency under extreme cold. This subcontract is for performance at the US Air Force Academy in Colorado, with a response deadline of August 14, 2026. The North American Industry Classification System code 333992 indicates the work falls under other commercial and industrial machinery and equipment manufacturing. The contracting entity is the Department of Defense under the FA7000 10 Cons Lgc office, and the nature of the procurement is specifically targeted toward subcontracting opportunities without a designated set-aside classification. All deliverables must meet stringent technical requirements for thermal performance, and successful bidders will be expected to demonstrate expertise in cryogenic engineering and component integration for defense-related scientific instrumentation.
Welding and Soldering Equipment Manufacturing

POSTED

3 days ago

DEADLINE

in 4 days
View Details