Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

Feasibility Study, Dallas District, Districtwide

Active
601CT0000006533State & Local

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Texas Department of Transportation is seeking proposals for a feasibility study focused on the US 75 corridor between IH-635 and the Sam Rayburn Tollway within the Dallas District. The study aims to evaluate transportation needs, potential improvements, and infrastructure options to enhance mobility and safety along this critical route. The solicitation was posted on July 22, 2026, with a firm response deadline of August 12, 2026, at 6:00 PM. All proposals must be submitted through the designated online portal, and no set-aside provisions are in place for this opportunity. Performance of the work is expected to occur within the state of Texas, specifically in the designated Dallas District area. Primary point of contact for inquiries is Christopher Franco, reachable via phone or email at 214-320-4405. The procurement is open to qualified contractors with the expertise to conduct comprehensive transportation feasibility analyses under state and federal guidelines.

General Info

Texas DOT seeks feasibility study for US 75 corridor between IH-635 and Sam Rayburn Tollway, deadline August 12, 2026.

Agency

Texas Department Of TransportationView Agency

NAICS

541715 - Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)View NAICS

Place of Performance

TX, USA

Set-Aside

NONE

Documents

(7)

Scope of Services-State Attachment B

PDF•sow

Solicitation 601CT0000006533 Subprovider Contact Information

XLSX•subprovider-contact-info

VetHUB Subcontracting Plan Compliance Checklist

PDF•checklist

Scope of Services for Engineering - US 75 Corridor Project

PDF•sow

Texas DOT Engineering Services Contract Template

PDF•contract-document

Subcontracting Plan Instructions for Solicitation 601CT0000006533

PDF•subcontracting-plan

TxDOT RFP 601CT0000006533 Feasibility Study US 75 Corridor

PDF•rfp

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyTexas Department Of Transportation
Contacts1 person available
OfficeTX, USA
Organization / Agency
Texas Department Of Transportation
View Agency Profile
Office AddressTX, USA
Contacts
Christopher Franco
+1 (555) 000-0000

Full Description

Show more
Feasibility Study for the US 75 Corridor from IH635 to the Sam Rayburn Tollway in the Dallas District

Similar Contracts

Same NAICS industry code

NAICS: 541715
New
International
Digital Feasibility Study of a solid-state hydrogen-powered Light Armoured Vehicle (LAV)The Department of National Defence is seeking a contractor to conduct a digital feasibility study for a solid-state hydrogen-powered Light Armoured Vehicle (LAV) with a maximum weight of 45,000 lbs, under solicitation W8486-270848/A. The contract is intended to be awarded for an initial two-year term with final delivery required no later than March 20, 2028, and has a total ceiling value of $1,200,000, allocated across fiscal years 2026/27 ($500,000) and 2027/28 ($700,000), with applicable taxes excluded. The scope of work includes performing a SWaP analysis, determining vehicle configurations for 4x4, 6x6, 8x8, and tracked platforms, delivering 3-D CAD models, and producing a suite of technical deliverables including a project schedule in GANTT format, a mission profile, draft and final reports, and a project presentation. The study is strictly focused on the powertrain configuration and excludes analysis of armor, weapons, communications, or other ancillary systems. The contract is structured as cost-reimbursable, with payments tied to milestone completions and subject to the Limitation of Expenditure specified in the schedule. Invoicing must be submitted per delivery, detailing expenditures, labor rates, subcontractors, and taxes separately, with undisputed invoices payable within 30 days of acceptance. Proposals must be submitted in three sections—technical, financial, and administrative—and must include mandatory forms such as the Offer Submission Form and Offeror Declaration Form, along with a valid Business Number. Offers are evaluated using a weighted point system totaling up to 220 points, with a minimum of 130 points required to be considered responsive. Technical evaluation prioritizes project management certification (15 points), demonstrated experience on at least three relevant projects (30 points), and experience with 4x4, 6x6, 8x8, or tracked vehicle platforms. Mandatory requirements, identified by the terms “must” or “mandatory,” are pass/fail criteria, and failure to meet them results in non-compliance. The contractor is responsible for maintaining detailed financial and operational records, including source data in machine-readable formats, and must comply with Treasury Board policies on contracts involving former public servants, as well as all applicable laws,
Department of National Defence

POSTED

about 14 hours ago

DEADLINE

in 13 days
View Details
NAICS: 541715
New
DIBBS
Supply of Export-Controlled Components or Data ManagementThe contract pertains to the secure handling and management of ITAR- and EAR-controlled components or technical data for use in defense manufacturing, requiring strict compliance with U.S. export control regulations. It is issued as a subcontract under a Total Small Business Set-Aside, exclusively available to small businesses as defined by the SBA, and falls under NAICS code 541715 for research and development in the physical, engineering, and life sciences. The performance location is specified as Texarkana, TX, with a zip code of 75507-5000, and the awarding agency is the ASC Commodities Division within the Department of Defense. The solicitation was posted on July 22, 2026, and responses must be submitted by July 30, 2026, with all work expected to meet rigorous security and export compliance standards throughout the supply chain.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 541715
New
DIBBS
Technical Data Package (TDP) Development & Compliance
MARITIME SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 14 days
View Details
NAICS: 541715
New
Federal
On-Site Installation and Training ServicesThe contract entails on-site installation, commissioning, and user training at the NIST facility in Gaithersburg, Maryland, with the objective of achieving full system operation within two to four weeks. The work includes seamless integration with an existing spectrometer and comprehensive performance verification to ensure the system meets all required operational standards. The services are critical to enabling end-users to effectively operate the equipment, with training designed to impart both technical understanding and practical proficiency. All activities must be completed at the specified location in Gaithersburg, and the contractor is expected to deliver a fully functional, verified system within the outlined timeframe. This subcontract, classified under NAICS code 541715 for scientific research and development services, is issued by the Department of Commerce through NIST. The solicitation was posted on July 22, 2026, with responses due by August 5, 2026. The contract is not subject to a specific set-aside designation and is open to eligible subcontractors seeking to provide specialized technical services. The performance location is firmly established at NIST’s Gaithersburg campus, with no alternative performance sites permitted. Interested parties must submit proposals by the deadline to be considered for award.
Department Of Commerce Nist

POSTED

1 day ago

DEADLINE

in 13 days
View Details
NAICS: 541715
New
Federal
Installation and Technical Integration Support for QX700 E SystemThe contract entails the on-site or remote installation, calibration, and seamless integration of the QX700 E system with the QX200 AutoDG platform, ensuring full operational compatibility and functionality. This work includes comprehensive staff training to enable proficient use of the integrated system and performance verification to confirm that all technical specifications and operational benchmarks are met. The scope is focused on delivering end-to-end technical support to ensure the systems function as intended in real-world environments, with an emphasis on reliability and user competency. This subcontract is issued under the NAICS code 541715, categorized under research and development in the physical, engineering, and life sciences, and is managed by the National Institutes of Health via the Department of Health and Human Services. The solicitation was posted on July 22, 2026, with a response deadline of July 30, 2026, at 6:00 PM. The place of performance is not specified, allowing for either on-site or remote execution as deemed appropriate by the contractor. All deliverables must align with the technical requirements of the integrated system, and successful performance is contingent on meeting verified operational standards.
National Institutes Of Health Olao

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 541715
New
Federal
Export-Controlled Technical SupportThis contract requires on-site technical support services involving access to ITAR and EAR-controlled technical data related to the CMM system, indicating that all work must comply with strict U.S. export control regulations. The performance location is in Hampton, Virginia, with a zip code of 23681, and the work is classified as a subcontract under the NAICS code 541715, which corresponds to research and development in the physical, engineering, and life sciences. The contract was posted on July 22, 2026, with a response deadline of July 24, 2026, suggesting a short turnaround for submissions. The contracting entity is the NASA Shared Services Center, part of the National Aeronautics and Space Administration, signifying that the support services are critical to a federally funded aerospace program. Access to controlled technical data means that personnel must be cleared to handle sensitive information, and strict compliance with export control laws is mandatory throughout the duration of the engagement.
NASA Shared Services Center

POSTED

1 day ago

DEADLINE

in 1 day
View Details
NAICS: 541715
New
Federal
Long-Term Pavement Performance (LTPP) Program Engineering Services Contract (LPES)The Federal Highway Administration is seeking qualified contractors for the Long-Term Pavement Performance (LTPP) Program Engineering Services Contract to support the collection, storage, analysis, and presentation of pavement performance data, both historical and newly acquired. Contractors must provide all necessary facilities, trained personnel, and subject matter experts to execute tasks under an indefinite delivery, indefinite quantity contract structure, with task orders awarded competitively. The scope includes managing LTPP dataset development, conducting specialized data analysis, and translating research findings into practical engineering tools, guidelines, and program deliverables. Contractors may use their own equipment or procure third-party services to carry out data collection, ensuring full delivery of services and data as required. The contract is categorized under NAICS code 541715 and is not subject to any set-aside provisions. Proposals are due by August 5, 2026, with the solicitation posted on July 22, 2026. Primary responsibilities fall into three core areas: pavement performance data collection and processing, LTPP dataset development and special studies, and overall engineering support and program activities. The point of contact for inquiries is Tamiko Aikens, with Bob Brown as the secondary contact, and the contract will be managed by the Department of Transportation’s 693JJ3 Acquisition and Grants Management office located in Washington, DC. Performance locations are not fully specified but will align with national pavement research needs.
693JJ3 Acquisition And Grants Mgt

POSTED

1 day ago

DEADLINE

in 13 days
View Details
NAICS: 541715
New
Federal
Army Contracting Command – Red River Army Depot (ACC-RRAD) Organic Industrial Base (OIB) Modernization Commercial Solutions Opening (CSO)The U.S. Army, through the Army Contracting Command – Red River Army Depot (ACC-RRAD), is executing a Commercial Solutions Opening (CSO) under solicitation W911RQ-26-S-C001 to modernize its Organic Industrial Base (OIB) by leveraging innovative commercial technologies aligned with Convergent Manufacturing principles. This initiative focuses on enhancing agile facilities, digital enterprise integration, automation, cybersecurity, and advanced manufacturing capabilities, particularly in support of military vehicle sustainment and modernization efforts. The CSO, authorized under DFARS Subpart 212.70 and executed under FAR Part 12 Commercial Item Procedures, enables the Department of Defense to competitively acquire non-traditional and traditional commercial solutions without pre-defined contract vehicles. A series of targeted Areas of Interest (AoIs) have been issued to address specific modernization needs, including the replacement of a damaged camera monitoring system around a one-mile vehicle test track, restoration of automated media recycling in a blast booth, development of Power Pack Interface & Test Sets for military vehicle testing, certification support for AS9100 quality systems, and the design and manufacture of tracked vehicle track pins and bushings, as well as improved fixture removal methods for Bradley Fighting Vehicle hulls. Each AoI seeks technically feasible, scalable, and innovative commercial solutions that reduce reliance on single-source suppliers and enhance domestic manufacturing resilience. Proposals must be submitted electronically by specified deadlines ranging from late 2025 through mid-2026, with submission formats limited to a five-page technical brief or fifteen-slide presentation in Phase 1, followed by more detailed proposals if selected. Only entities registered in SAM.gov with a valid Unique Entity ID are eligible for award, and while socioeconomic status or small business classification is not mandatory to disclose, nontraditional contractors and small businesses are encouraged to respond. Evaluation is based on a trade-off process focusing first on technical merit and feasibility—including innovation and manufacturability—followed by industrial base impact, speed and scalability of implementation, price reasonableness, private investment leverage, and a credible transition plan to sustained production. Performance is expected to occur at Red River Army Depot inTEXARKANA, Texas, with inspection and acceptance governed by established military standards such as MIL-DTL-11891, MIL-STD-105, and ASTM specifications for materials and workmanship. Final awards are contingent upon funding availability and contractual negotiations, with no obligation implied by submission or selection. Invoicing must
W6QK Acc Rrad

POSTED

1 day ago

DEADLINE

in 2 months
View Details
NAICS: 541715
New
Federal
Evaluations, Assessments and Support Services (EASS)NASA Langley Research Center is conducting market research through a Request for Information and Sources Sought notice to inform the upcoming procurement of the Evaluations, Assessments, and Support Services (EASS) contract, aiming to identify industry capabilities and foster competition, especially among small businesses, Historically Black Colleges and Universities, and Minority Institutions. The procurement, classified under NAICS code 541715 with a size standard of 1,000 employees, will support the Science Office for Mission Assessments by providing evaluations of proposal and Phase A reports in accordance with NASA guidelines, independent assessments of missions and programs using established NASA policies, and comprehensive support services including technical, managerial, cost, and schedule analyses. The government anticipates a single-award, indefinite-delivery, indefinite-quantity contract with both cost-plus-fixed-fee and firm-fixed-price task orders, and is actively seeking industry feedback on contract structure, commerciality, incentive alignment, and ways to streamline procurement processes. Respondents are required to submit capability statements not exceeding ten pages, detailing their organizational structure, size designation, past performance, technical expertise in evaluation and assessment functions, and their approach to managing organizational and personal conflicts of interest, with particular attention to the draft Data Requirements Document on OCI Plans. Firms must also confirm their ability to support work requiring access to Top Secret/Sensitive Compartmented Information, either through existing facility clearance or the capacity to obtain one with NASA sponsorship. Responses are due by August 5, 2026, and must be submitted electronically without export-controlled information; while submissions are voluntary and not compensated, they will inform NASA’s acquisition strategy, with proprietary information marked as confidential protected under the Freedom of Information Act.
NASA Langley Research Center

POSTED

1 day ago

DEADLINE

in 13 days
View Details
NAICS: 541715
New
Federal
MXO Office-wide Innovative Solutions OpeningThe Defense Advanced Research Projects Agency’s Multi X Office is seeking revolutionary research concepts through an open, rolling-call solicitation under DARPA-PS-26-115, targeting high-risk, high-reward innovations that exceed evolutionary improvements to current technologies. This solicitation, issued under the authority of 10 U.S.C. §§ 4021, 4022, and 4023, enables the use of Other Transactions for Research and Prototype agreements, allowing flexibility in contract structure and intellectual property arrangements. Proposals must align with one of three technical thrusts: developing novel materials and components beyond traditional CMOS foundations to ensure resilient and secure systems; establishing indigenous supply chains and tools for domestic design and production of critical technologies; or advancing new sensing, orienting, computing, and communicating modalities that redefine mission effects. The solicitation explicitly excludes research that merely refines existing capabilities and emphasizes transformative breakthroughs in science, components, or systems. All submissions must be made electronically via DARPA’s Broad Agency Announcement Tool, with an initial abstract required prior to any full proposal invitation, and abstracts must be submitted by April 23, 2027, with full proposals due by June 4, 2027, on a rolling basis following review. Abstracts must not exceed six pages, be unclassified or Controlled Unclassified Information, include a Rough Order of Magnitude cost estimate, and follow strict formatting guidelines. Full proposals must include two volumes—Technical and Management, and Price—along with additional supporting documents like the Proposal Summary Slide and Price Summary Spreadsheet, and require mandatory disclosure of any AI tools used in preparation. Proposers must be registered entities with a Unique Entity ID, CAGE code, and Taxpayer Identification Number, and must comply with NIST SP 800-171 rev 2 cybersecurity requirements unless the work qualifies as fundamental research, in which case safeguards apply only if the project scope changes. Government entities, FFRDCs, and UARCs face additional eligibility constraints, including demonstrating that the proposed work is not otherwise available through the private sector and providing legal authority documentation, with 15 U.S.C. § 3710a deemed insufficient. Foreign nationals and U.S. permanent residents participating in presentations must be covered by an eForm 60, and prime contractors are responsible for ensuring compliance across all subawardees. Evaluations prioritize overall scientific and technical merit, including innovation, feasibility, team expertise,
Defense Advanced Research Projects Agcy

POSTED

1 day ago

DEADLINE

in 11 months
View Details
NAICS: 541715
New
Federal
Fabrication and Flow Field Quantification of Transparent Micronozzle Flow ModelsThe contract calls for the fabrication of optically transparent flow models mimicking 22-Gauge and 25-Gauge micronozzle tips and extensions to study fluid dynamics relevant to medical device evaluation. These models will be used to conduct particle velocimetry and pressure measurements, enabling detailed characterization of blood flow behavior under controlled conditions. The research aims to support the FDA’s assessment of hemodynamic performance in medical devices, particularly focusing on flow patterns and shear forces in microscale geometries. The solicitation, numbered 75F40126Q00294, was posted on July 22, 2026, with a response deadline of July 31, 2026, and is designated as a Total Small Business Set-Aside under NAICS code 541715. It is administered by the FDA Negotiated Contracts Branch within the Department of Health and Human Services, with performance based in Silver Spring, Maryland, and the office located in Rockville. Primary point of contact is Sheila Brown, with Ian Weiss as secondary contact, both reachable via FDA email addresses. The contract is available for review through the SAM.gov platform.
FDA Negotiated Contracts Branch

POSTED

1 day ago

DEADLINE

in 8 days
View Details
NAICS: 541715
New
Federal
Metalex Cobalt and Copper Production ExpansionThe U.S. Trade and Development Agency is supporting a feasibility study for the Metalex Cobalt and Copper Production Expansion project in Zambia, funded under Activity No. 2025-11011A. This initiative aims to assess the technical and economic viability of expanding cobalt and copper production capabilities, with the goal of fostering sustainable development and economic growth in Zambia through U.S. private sector expertise. Interested American companies must submit proposals by the deadline of August 21, 2026, at 8:59 p.m. Eastern Time, following the solicitation issued by the agency. All relevant details and application instructions are available on the USTDA’s official website. The solicitation is classified as a special notice and is administered by the United States Trade and Development Agency, headquartered in Arlington, Virginia. There is no set-aside designation for small businesses or other categories, and the North American Industry Classification System code is not specified. Proposals must address the scope of the feasibility study for the Zambian expansion, and while the exact place of performance is not detailed, the work will primarily relate to the project site in Zambia. U.S. firms seeking to participate can access the full Request for Proposal through the provided SAM.gov link and are encouraged to engage directly with the agency for clarification on requirements.
US Trade And Development Agency

POSTED

1 day ago

DEADLINE

in 29 days
View Details

More opportunities from Texas Department Of Transportation

Same awarding agency

New
SLED
Traffic Signal Poles for the TxDOT Corpus Christi District (CRP)

POSTED

1 day ago

DEADLINE

in 13 days
View Details
NAICS: 237310
New
SLED
HUB Subcontracting ParticipationHUB-certified businesses are invited to participate in subcontracting opportunities under the Texas Department of Transportation’s HUB subcontracting plan, targeting work within the NAICS code 237310 for heavy and civil engineering construction. This opportunity allows certified firms to engage across various trade disciplines on projects managed by prime contractors bound by HUB compliance requirements. The solicitation is open for responses until September 1, 2026, with no formal solicitation number provided, indicating a streamlined process for HUB vendors to connect with prime contractors actively fulfilling their minority business participation obligations. All performance will occur across Texas, consistent with the agency’s state-level infrastructure initiatives. There is no specific set-aside designation, but participation is structured to support the agency’s broader goals for HUB economic inclusion. Interest should be expressed through the designated online portal prior to the stated deadline.
Highway, Street, and Bridge Construction

POSTED

2 days ago

DEADLINE

in about 1 month
View Details
NAICS: 541370
New
SLED
Environmental and Material Testing ServicesThe contract titled Environmental and Material Testing Services is a subcontract issued by the Texas Department of Transportation for comprehensive field and laboratory testing of concrete, soil, and asphalt materials to verify adherence to project specifications and industry standards. The solicitation was posted on July 21, 2026, with a response deadline of September 1, 2026, and is classified under NAICS code 541370, which pertains to architectural, engineering, and related services. Testing activities are expected to support infrastructure projects across Texas, with performance location details not specified in the public data. The contract aims to ensure material integrity and regulatory compliance throughout the construction lifecycle, requiring qualified vendors to deliver accurate, timely, and certified test results. All submissions must meet technical and procedural requirements set by the Texas Department of Transportation, though specific performance metrics or reporting formats are not detailed in the publicly available information.
Surveying and Mapping (except Geophysical) Services

POSTED

2 days ago

DEADLINE

in about 1 month
View Details
NAICS: 327320
New
SLED
Concrete Materials Supply (Ready-Mix)The contract involves the supply of ready-mix concrete for use in drilled shafts, footings, and other structural elements, with all materials required to meet ASTM C31 standards for concrete sampling and testing. This subcontract is issued by the Texas Department of Transportation and is intended for projects within the state of Texas, with performance expected to support critical infrastructure construction activities. The solicitation was posted on July 21, 2026, and responses must be submitted no later than September 1, 2026, at 5:00 PM local time. The NAICS code 327320 identifies this as a business pertaining to concrete product manufacturing, underscoring the need for suppliers to possess the technical capability and quality control systems to deliver consistent, compliant concrete batches. All deliveries must align with project specifications for strength, slump, air content, and durability, and suppliers are expected to provide documentation verifying adherence to ASTM C31 procedures throughout the contract term.
Ready-Mix Concrete Manufacturing

POSTED

2 days ago

DEADLINE

in about 1 month
View Details
NAICS: 212324
New
SLED
Crushed Limestone and Aggregate SupplyThe contract is for the supply of crushed limestone and aggregates designated for use in base and sub-base layers in road construction and structural applications. It is designated as a subcontract with a NAICS code of 212324, indicating a focus on quarrying and related activities for nonmetallic minerals. The Texas Department of Transportation is the issuing agency, and the work is expected to support transportation infrastructure projects across the state. Bidders must submit responses by the deadline of September 1, 2026, at 5:00 PM, following the posting date of July 21, 2026. The place of performance and specific location details are not provided, but delivery and service will be required within Texas. There is no set-aside designation indicated, meaning the opportunity is open to all qualified suppliers regardless of business size or ownership category. Interested parties must access the opportunity through the provided online portal for submission and further details.
Kaolin and Ball Clay Mining

POSTED

2 days ago

DEADLINE

in about 1 month
View Details
NAICS: 237310
New
SLED
Asphalt Pavement Supply and PlacementThe contract pertains to the supply and installation of asphalt pavement, encompassing all necessary grading, compaction, and quality testing procedures to meet transportation industry specifications. The work is to be performed under a subcontract arrangement with the Texas Department of Transportation, aligned with NAICS code 237310 for highway and street construction. All activities must comply with state transportation standards, ensuring durability, safety, and regulatory adherence throughout the project lifecycle. The solicitation was posted on July 21, 2026, with a response deadline of September 1, 2026, providing bidders a specified window to submit proposals. The place of performance is within Texas, though specific locations are not detailed, and all work must fulfill the technical and procedural requirements set forth by the agency.
Highway, Street, and Bridge Construction

POSTED

2 days ago

DEADLINE

in about 1 month
View Details
NAICS: 238910
New
SLED
Drilled Shaft Construction (Deep Foundation Work)The contract is for the installation of drilled shafts as part of deep foundation work, encompassing all necessary steps including excavation, placement of reinforcement cages, and tremie concrete placement to provide structural support. This subcontract opportunity is issued by the Texas Department of Transportation under NAICS code 238910 and is open for responses until September 1, 2026, with a posted date of July 21, 2026. The work is intended for infrastructure projects in Texas, though specific location details are not provided. Bidders must be prepared to meet all technical and safety requirements for deep foundation construction and must submit proposals through the designated online portal prior to the deadline.
Site Preparation Contractors

POSTED

2 days ago

DEADLINE

in about 1 month
View Details
NAICS: 237130
New
SLED
RADIO TOWER AND BUILDING, MULTIPLE LOCATIONS CORPUS CHRISTI AND PHARR DISTRICTSThe Texas Department of Transportation is inviting bids for the construction of radio towers and associated buildings across multiple locations within the Corpus Christi and Pharr districts, with a primary focus on the IH-37 and Loop 459 area in Mathis, Texas. The solicitation, identified as 16-470426754 and posted on July 21, 2026, requires all proposals to be submitted by September 1, 2026, at 12:00 PM Central Time. The agency has elected not to disclose the estimated project cost, directing bidders to rely on their own market research and independent assessments of the requirements detailed in the official solicitation documents. Potential respondents must register on the TxDOT Euna procurement portal to access and submit bids, with registration instructions available through the vendor support site. All inquiries should be directed to SSD_ContractLettings@TxDOT.gov or via the TxDOT Facilities Project Letting webpage. The project involves infrastructure development critical to communication systems, and participation is restricted to vendors who properly register and comply with all submission protocols outlined by the department.
Power and Communication Line and Related Structures Construction

POSTED

2 days ago

DEADLINE

in about 1 month
View Details
NAICS: 493110
New
SLED
Off-Site Materials Storage and LogisticsThe contract requires a provider to offer bonded and insured off-site storage for construction materials used in Texas Department of Transportation projects, with full responsibility for inventory management, material handling, and coordination of deliveries to project sites. The vendor must ensure secure, organized storage that supports timely access and efficient logistics, maintaining accurate records and facilitating seamless movement of materials as needed. Compliance with TxDOT inspection standards is mandatory, including allowing unrestricted access for state inspectors at all times to verify conditions and documentation. The storage facility and operations must meet all regulatory and safety requirements for the handling and protection of construction supplies, with insurance and bonding in place to mitigate risk and ensure accountability. The opportunity is structured as a subcontract with a response deadline of September 1, 2026, and falls under NAICS code 493110 for warehousing and storage. Performance is expected to support TxDOT infrastructure initiatives across the state, though specific locations for delivery are not outlined. Contractors must be prepared to demonstrate operational readiness, compliance protocols, and the ability to scale services in alignment with dynamic project demands.
General Warehousing and Storage

POSTED

2 days ago

DEADLINE

in about 1 month
View Details
NAICS: 541380
New
SLED
HUB Subcontracting ParticipationCertified HUB, MBE, WBE, and DBE firms are invited to participate in testing, logistics, or support services under the Texas Department of Transportation’s mandatory HUB Subcontracting Plan. This opportunity is structured to ensure meaningful involvement of qualifying small and minority-owned businesses in critical operational roles supporting state transportation initiatives. Participants must be prepared to comply with ongoing reporting requirements, including monthly submissions of performance and compliance documentation to demonstrate adherence to subcontracting goals and affirmative outreach efforts. The solicitation is open through September 1, 2026, and the NAICS code 541380 indicates involvement in other scientific and technical consulting services. All work is expected to align with the broader objectives of the agency’s commitment to equitable contracting and diverse supplier engagement, with performance tied directly to compliance monitoring and recordkeeping obligations.
Testing Laboratories and Services

POSTED

2 days ago

DEADLINE

in about 1 month
View Details
NAICS: 541380
New
SLED
Base and Aggregate Materials InspectionThe contract requires comprehensive inspection and testing of granular base, subbase, and aggregate materials to ensure compliance with specified gradation, abrasion, and compaction standards. Field verification of layer thickness and proper placement is also mandatory to confirm adherence to engineering specifications. All work must be conducted in accordance with accepted industry practices and state transportation requirements. The contract is designated as a subcontract under NAICS code 541380 and is managed by the Texas Department of Transportation. Interested parties must submit responses by September 1, 2026, with the opportunity posted on July 21, 2026, and performance expected within Texas.
Testing Laboratories and Services

POSTED

2 days ago

DEADLINE

in about 1 month
View Details
NAICS: 541380
New
SLED
Asphalt and Pavement Materials TestingThe contract involves comprehensive field and laboratory testing of hot-mix asphalt to verify gradation, asphalt content, density, and mix design compliance. Testing procedures include both nuclear and non-nuclear methods for assessing the density of compacted pavement lifts, ensuring adherence to engineering standards and performance requirements. All work must be conducted in accordance with accepted industry protocols to support the integrity and longevity of roadway construction projects under the Texas Department of Transportation's oversight. The solicitation is structured as a subcontract and falls under NAICS code 541380 for architectural, engineering, and related services. Responses are due by September 1, 2026, and the opportunity was posted on July 21, 2026. The performance location is situated within Texas, though specific city or zip details are not provided. The contract does not designate a specific set-aside classification or indicate the type of organization targeted, but it is exclusively accessible through the Texas Department of Transportation’s BonfireHub portal for submissions and further information.
Testing Laboratories and Services

POSTED

2 days ago

DEADLINE

in about 1 month
View Details