Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

FEEDER, CHEMICAL SOLUTI

Active
SPE8E8-26-T-5432Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

Solicitation SPE8E8-26-T-5432 is a fixed-price request for quotations issued by DLA Troop Support Construction and Equipment for the procurement of two chemical solution feeders for water purification, identified by NSN 4610-01-229-9014. The required hardware features a stainless steel body, brass fittings, dual feed, and two brominating cartridges. This is a total small business set-aside under NAICS 333310, with quotations due by September 14, 2026. The delivery period is specified as 167 days after order, with shipping terms set as FOB Origin and inspection and acceptance occurring at the destination, specifically the DSP New Cumberland Facility in Pennsylvania. The contract incorporates stringent technical and quality standards, including DLA packaging requirements RP001 and marking standards MIL-STD-129. It mandates compliance with the Buy American Act and the Berry Amendment, requiring disclosure for any non-domestic materials used. Security and safety requirements include the safeguarding of covered defense information per DFARS 252.204-7012 and strict prohibitions against the intentional addition of mercury or mercury-containing compounds. Payment must be processed electronically through the Wide Area WorkFlow system. All quotes must be submitted via the DLA Internet Bid Board System.

General Info

DoD procurement of two chemical solution feeders for DDSP New Cumberland facility.

Agency

Department Of Defense → DDSP NEW CUMBERLAND FACILITYView Agency

NAICS

333310 - Commercial and Service Industry Machinery ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

SBA

Documents

(1)

SPE8E8-26-T-5432 Request for Quotations

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DDSP NEW CUMBERLAND FACILITY
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → DDSP NEW CUMBERLAND FACILITY
View Agency Profile
Office AddressUSA
Contacts
Alexis Selby
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
FEEDER,CHEMICAL SOLUTION,WATER PURIFICAT
FEEDER, CHEMICAL SOLUTION, WATER PURIFICATION
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
STAINLESS STEEL BODY, BRASS FITTINGS,
TWO BROMINATING CARTRIDGES, DUAL FEED.
ADEQUATE DATA FOR NSN/Part Number: 4610-01-229-9014 Quantity: 2 EA Purchase Request: 7018161061QTY: 2 Delivery: 167 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 333310
New
DIBBS
CAMERA SUBASSEMBLY
Solicitation # SPE8EN-26-T-3109
This contract is for the procurement of 70 units of a camera subassembly, identified by NSN 6710-01-690-4503 and Thales Defense and Security part number V14563-17-01. Classified as a Commercial Off The Shelf item, the procurement is managed under solicitation SPE8EN-26-T-3109 and is designated as a Total Small Business Set-Aside. Delivery is required within 153 days, with a need ship date of February 15, 2027, and a final required delivery date of July 9, 2027. The agreement specifies delivery FOB Origin with inspection and acceptance occurring at the destination, specifically DLA Distribution San Joaquin in Tracy, California. Compliance with several DLA technical and quality requirements is mandatory, including packaging standards per ASTM D3951 and MIL-STD-129, CMMC Level 2 self-assessment for cybersecurity, and specific guidelines for covered defense information. The contract explicitly notes that no approved technical data package is available from DLA Troop Support for this item.
CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

about 13 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333310
New
DIBBS
EYESHIELD, OPTICAL INST
Solicitation # SPE7M1-26-T-326M
This contract is for the procurement of 10 optical instrument eyeshields under solicitation number SPE7M1-26-T-326M for the Department of Defense Maritime Supply Chain. The items are identified by NSN 1240-01-696-3637 and part number LBT-2828Z. Delivery is required by April 14, 2027, with a delivery timeframe of 211 days after order. The agreement specifies that shipping is FOB Origin with inspection and acceptance occurring at the destination, specifically DLA Distribution San Joaquin in Tracy, California. Packaging must adhere to ASTM D3951 and MIL-STD-129, while palletization must follow DLA packaging requirements. Technical and quality standards are governed by the DLA Master List, and the contract mandates the removal of government identification from any non-accepted supplies.
MARITIME SUPPLY CHAIN

POSTED

about 13 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333310
New
DIBBS
PAD, CUSHIONING
Solicitation # SPE7L1-26-T-06V2
This contract is for the procurement of one cushioning pad, identified by NSN 2590016900931 and part number 0322873-016 from Gemstar Manufacturing Inc. The order is managed by the Department of Defense Land Supply Chain under solicitation SPE7L1-26-T-06V2, with a required delivery date of September 1, 2026, and a delivery window of 10 days after the order. The item is to be delivered FOB Origin to the 115 BSB SSA at Fort Hood, Texas. The agreement mandates strict adherence to DLA technical and quality requirements, including RP001 for packaging and MIL-STD-129 for marking and labeling. Packaging must comply with ASTM D3951, and the use of Class I ozone-depleting chemicals is strictly prohibited. Inspection and acceptance will take place at the destination, and shipments must be sent via the fastest traceable means, excluding parcel post.
LAND SUPPLY CHAIN

POSTED

about 13 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333310
New
DIBBS
PRODUCTION LOT TESTING
Solicitation # SPE7M4-26-Q-0977
This solicitation, issued by the Department of Defense Fluid Handling Division under solicitation number SPE7M4-26-Q-0977, is for the procurement of 17 units of the DOLLY MK21-0 (NSN/Part Number 0001S00000061). The contract focuses on production lot testing with a delivery requirement of 408 days after the order is placed. Performance is designated for Bremerton, Washington, under NAICS code 333310. The contract mandates strict adherence to cybersecurity and export control regulations. Specifically, it requires CMMC Level 2 certification via a Third-Party Assessment Organization and compliance with ITAR and EAR regulations regarding the handling of technical data. Access to export-controlled information is limited to contractors with approved US/Canada Joint Certification Program certification and completed DLA export training. Additionally, the agreement incorporates technical and quality requirements as specified in the DLA Master List.
FLUID HANDLING DIVISION

POSTED

about 13 hours ago

DEADLINE

in 13 days
View Details
NAICS: 333310
New
DIBBS
BRACKET, VEHICULAR C
Solicitation # SPE7L3-26-T-224S
This solicitation, issued by the Department of Defense Land Supplier Operations Vehicle Support, is for the procurement of one Vehicular C Bracket under National Stock Number 2590-01-677-4684. The contract requires delivery within five days after the order is placed and is associated with solicitation number SPE7L3-26-T-224S. Performance is designated for Camp Pendleton, California. The agreement is subject to strict technical and quality requirements as defined by the DLA Master List, including specific packaging standards and the removal of government identification from non-accepted supplies. It prohibits the use of Class I ozone-depleting chemicals and mandates strict adherence to ITAR and EAR export controls. Access to technical data is limited to approved contractors with US/Canada Joint Certification Program certification and completed Department of Defense export-control training.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 13 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333310
New
DIBBS
WEAR PAD, BOOM
Solicitation # SPE7L3-26-T-223W
This contract is for the procurement of three boom wear pads, identified by NSN 2590-01-697-4861 and Caterpillar part number 46-2186. The order is managed under solicitation number SPE7L3-26-T-223W for the Department of Defense, specifically the Land Supplier Operations Vehicle Support agency. Delivery is required within 20 days, with a required delivery date of August 17, 2026, shipping FOB Origin to the Naval Expeditionary Logistics Support Group in Williamsburg, Virginia. The agreement mandates strict adherence to DLA packaging requirements and MIL-STD-129 marking standards. It explicitly prohibits the use of Class I ozone-depleting chemicals in the manufacture or delivery of the items. Inspection and acceptance will take place at the destination. The contract specifies that shipping must be conducted via the fastest traceable means and prohibits the use of parcel post.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 13 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333310
New
Federal
Floor Scrubber
Solicitation # W911S226U4386
The Department of Defense, specifically the W6QM Micc-Ft Drum office located in Fort Drum, New York, is soliciting bids for a floor scrubber under solicitation number W911S226U4386. This combined contract opportunity is designated as a total set-aside for small businesses and falls under NAICS code 333310. The solicitation was posted on September 3, 2026, with a response deadline of September 10, 2026. Interested parties should contact Joseph Indomenico for further details regarding the performance of this contract, which is associated with zip code 18466.
W6QM Micc-Ft Drum

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 333310
New
Federal
48 LRS - Gooseneck Trailer
Solicitation # FA558726Q0061
The Department of Defense, specifically the 48th Logistics Readiness Squadron Ground Transportation Element, is soliciting bids for the procurement of one HGV Low Loader Trailer to support mission critical transportation requirements. This solicitation, identified by number FA558726Q0061, falls under NAICS code 333310 and is open to all qualified bidders as there is no specific set aside for this requirement. The response deadline for this opportunity is September 23, 2026, at 2:00 PM. The place of performance is located in Lakenheath, Suffolk. Interested parties can coordinate with the primary point of contact, TSgt Christian Cuevas, or the secondary contact, SSgt Jennifer Lopez, for further inquiries regarding this acquisition.
FA5587 48 Cons (admin Only No Req)

POSTED

about 18 hours ago

DEADLINE

in 19 days
View Details
NAICS: 333310
New
Federal
48 OG - F35 Locker Room Refurbish
Solicitation # FA558726Q0060
The Department of Defense is soliciting bids for the refurbishment of the F35 Pilot locker rooms located within building 1355 at RAF Lakenheath in Suffolk. This project, identified by solicitation number FA558726Q0060, falls under NAICS code 333310 and is managed by the 48 Cons administrative office. The solicitation was posted on September 3, 2026, with a response deadline of September 21, 2026, at 2:00 PM. There are no specific set-asides applied to this contract. Primary coordination for this effort is handled by TSgt Christian Cuevas, with SSgt Jennifer Lopez serving as the secondary point of contact.
FA5587 48 Cons (admin Only No Req)

POSTED

about 18 hours ago

DEADLINE

in 17 days
View Details
NAICS: 333310
New
Federal
Flight-type Dishwasher for Kansas City in Kansas City, MO; Hobart FT1000E Base (Brand name or equal)
Solicitation # 36C25526Q0651
The Department of Veterans Affairs Heartland Network 15 Contracting Office is conducting market research for a high-capacity commercial warewashing system at the Kansas City VA Medical Center in Missouri. The requirement specifies a system equivalent to a Hobart FT1000E with base, designed to wash and sanitize large pots, pans, utensils, and mixing bowls within a healthcare food service environment. The anticipated scope of work includes the furnishing, delivery, and installation of the equipment, as well as the removal of existing machinery, commissioning, and operator training. The selected contractor must provide a minimum one-year parts-and-labor warranty and ensure all personnel comply with VA information security and privacy requirements. This is currently a sources sought notice and not a formal solicitation for proposals.
255-NETWORK Contract Office 15 (36C255)

POSTED

about 18 hours ago

DEADLINE

in 6 days
View Details
NAICS: 333310
New
Federal
Industrial Dryer Equipment - ADG 410
Solicitation # FA500026Q0051
Solicitation FA500026Q0051 is a small business set-aside, specifically targeting women-owned small businesses, for the procurement and installation of one industrial gas dryer at Joint Base Elmendorf-Richardson, Alaska. The project involves replacing an existing American Dryer Corporation model ADG410DD with a functionally equivalent or superior 410lb gas dryer. The contractor is responsible for the full installation, including connecting the unit to gas, air, electrical, water, and ventilation exhaust utilities, as well as the removal and relocation of the old dryer to a designated staging area using a forklift with a capacity between 5,000 and 15,000 lbs. Technical specifications require a heat input of 1,400,000 btu/hr, a maximum load of 400-475 lbs, a tumbler volume of at least 140 cubic feet, airflow of 9,200 cfm, and a minimum of six programmable cycles. The contract is governed by NAICS code 333310 and requires compliance with MIL-STD-130 for unique item identification of equipment valued at $5,000 or more, and MIL-STD-129 for shipment labeling. Delivery is requested by July 23, 2026, with terms set as FOB Destination. Payment and invoicing must be processed electronically through the Wide Area WorkFlow system. Award will be granted to the responsible offeror whose proposal is most advantageous to the government, considering both price and other specified factors.
FA5000 673 Cons Pkb

POSTED

about 18 hours ago

DEADLINE

in 6 days
View Details
NAICS: 333310
New
Federal
48 LRS – 50 Ton Trailer
Solicitation # FA558726Q0053
The Department of Defense, specifically the 48th Logistics Readiness Squadron Ground Transportation Element, is seeking one HGV Flatbed Trailer to support mission-critical transportation requirements. This solicitation, identified by number FA558726Q0053, falls under NAICS code 333310 and is open to all qualified bidders as there is no specific set-aside designated for this procurement. The response deadline for this requirement is September 17, 2026, at 2:00 PM. The place of performance is located in Lakenheath, Suffolk. Interested parties may contact TSgt Christian Cuevas or SSgt Jennifer Lopez for further information regarding this acquisition.
FA5587 48 Cons (admin Only No Req)

POSTED

about 18 hours ago

DEADLINE

in 13 days
View Details

More opportunities from Department Of Defense → DDSP NEW CUMBERLAND FACILITY

Same awarding agency

NAICS: 332111
New
DIBBS
BAR, METAL
Solicitation # SPE8E4-26-T-2197
This contract is for the procurement of 15 feet of round hot rolled steel bar, specifically Steel Comp 410 with an intermediate temper and a 4.000 inch diameter. The material must be descaled overall and supplied in whole foot lengths between 10 and 12 feet. Delivery is set for 167 days after the order, with a required delivery date of November 11, 2026, and a need ship date of March 1, 2027. The items are to be delivered FOB Origin to the DLA Distribution New Cumberland facility in Pennsylvania. Compliance requires strict adherence to technical and quality standards, including the provision of a Certificate of Quality Compliance and Metal Certification for every shipment. Suppliers must be listed on the Qualified Suppliers List for Distributors (QSLD) to be eligible for award. Detailed marking requirements are mandatory, including the contract delivery order number, NSN, and manufacturer details, using stamping or stenciling methods. Packaging and preservation must follow MIL-STD-129 and ASTM A700 standards.
Iron and Steel Forging

POSTED

about 13 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333515
New
DIBBS
ROUND SOAPSTONE
Solicitation # SPE8E5-26-T-4267
This solicitation, identified as SPE8E5-26-T-4267, is for the procurement of 1,194 units of round soapstone under NSN 3460-01-646-9233. The contract is issued by the Department of Defense through the DDSP New Cumberland Facility, with a required delivery timeline of 167 days after receipt of order. Strict compliance with DLA packaging requirements and export control regulations is mandatory. Because the item contains technical data subject to ITAR or EAR regulations, access is limited to contractors with an approved US/Canada Joint Certification Program certification and completed DOD export-control training. All technical data must be handled according to DFARS 252.225-7048 to prevent unauthorized disclosure to foreign persons.
Cutting Tool and Machine Tool Accessory Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 10 days
View Details
NAICS: 331491
New
DIBBS
SHEET, METAL
Solicitation # SPE8E4-26-T-2196
This contract is for the procurement of 283 aluminum alloy metal sheets, each measuring 0.100 inches thick, 48.00 inches wide, and 96.00 inches long. The material must adhere to specific technical standards, including SAE AMS-QQ-A-250/8C and ASTM B660, and must be supplied as strain hardened ALY 5052, H-32. This is designated as a critical application item, requiring strict adherence to exact dimensions with no test coupons allowed. Eligible awardees must be listed on the Qualified Suppliers List for Distributors (QSLD) or Manufacturers (QSLM). Key requirements include the provision of a Certificate of Quality Compliance with every shipment and detailed continuous identification markings on each unit, such as the contract delivery order number, NSN, and manufacturer details. Delivery is set for the DLA Distribution New Cumberland facility, with packaging and preservation requirements following MIL-STD-129 and ASTM B660.
Nonferrous Metal (except Copper and Aluminum) Rolling, Drawing, and Extruding

POSTED

about 13 hours ago

DEADLINE

in 10 days
View Details
NAICS: 424950
New
DIBBS
BRUSH, ARTIST'S
Solicitation # SPE8E7-26-T-3814
This contract, identified by solicitation number SPE8E7-26-T-3814, is for the procurement of 36 artist brushes for the Department of Defense. The specific requirements call for Type II oil and water color brushes, Class 2 pure red sable hair, Style A round with a single taper point and a size of 13/128 inch, conforming to basic CID A-A-3191A. The items are identified by NSN 8020-00-257-0378 and must be delivered to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The agreement specifies a delivery timeframe of 32 days after order, with a required delivery date of August 11, 2026. Packaging must adhere to ASTM D3951 and MIL-STD-129, while following DLA packaging requirements for procurement. The contract is FOB Origin, with inspection and acceptance occurring at the destination. Technical and quality requirements are governed by the DLA Master List, including provisions for the removal of government identification from non-accepted supplies and the handling of covered defense information.
Paint, Varnish, and Supplies Merchant Wholesalers

POSTED

about 13 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333415
New
DIBBS
COOLER UNIT, AIR
Solicitation # SPE8E8-26-T-5528
This contract is for the procurement of two air cooler units, identified by NSN 4130-01-372-2898 and part number H-4 LVR-4.0KW from Engineered Coil Company. The agreement specifies a delivery timeframe of 153 days, with a required delivery date of April 25, 2027, and a need ship date of February 15, 2027. Shipping is designated as FOB Origin, with the destination being the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The contract mandates strict adherence to DLA packaging and marking requirements, including MIL-STD-2073-1E and MIL-STD-129. It explicitly prohibits the intentional addition of mercury or mercury-containing compounds, except for specific functional components like batteries or sensors as specified by NAVSEA. Technical and quality requirements are governed by the DLA Master List, and the contract includes provisions for the removal of government identification from non-accepted supplies and the handling of covered defense information.
Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 10 days
View Details
NAICS: 325510
New
DIBBS
EPOXY COATING KIT
Solicitation # SPE8ES-26-T-2726
This contract is for the procurement of 41 epoxy coating kits, identified by NSN 8010-01-727-1881 and part number RK-BAE-001-S. The items must be manufactured according to specific technical drawings and delivered to the DLA Distribution New Cumberland facility in Pennsylvania. Delivery is required within 67 days, with a need ship date of November 25, 2025, and an original required delivery date of January 28, 2027. The supplier must adhere to strict hazardous material standards, including the submission of Safety Data Sheets and compliant labeling per OSHA and 29 C.F.R. 1910.1200. The product has a non-extendable shelf life of 60 months, and it must be delivered with at least 85% of that shelf life remaining. Packaging and marking must comply with MIL-STD-129 and DLA packaging requirements for hazardous materials.
Paint and Coating Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 5 days
View Details
NAICS: 332919
New
DIBBS
CONTRACTOR FIRST ARTIC
Solicitation # SPE7MC-26-Q-0428
This solicitation, issued by the Department of Defense under the DDSP New Cumberland Facility, is for the procurement of 46 cover plates for valves, identified by part number 0001S00000053. The contract requires delivery within 149 days after the order is placed. Bidders must adhere to a response deadline of September 16, 2026, for solicitation number SPE7MC-26-Q-0428. Compliance requirements are stringent, requiring CMMC Level 2 certification from a C3PAO and adherence to SAE AS9100 quality standards. Because the item involves technical data subject to ITAR or EAR export controls, contractors must have an approved US/Canada Joint Certification Program certification and have completed specific DLA export-control training and questionnaires to access the necessary technical data.
Other Metal Valve and Pipe Fitting Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332313
New
DIBBS
ARMOR PLATE
Solicitation # SPE8E4-26-T-2037
The contract solicitation SPE8E4-26-T-2037, issued by the Department of Defense through the DDSP New Cumberland Facility, seeks the procurement of 10 units of armor plate identified by NSN 9535-01-737-6312 under a FOB Origin delivery term. Delivery is required within 164 days after order placement, with an original delivery date of February 5, 2027 and a need ship date of February 1, 2027. The items must be packaged in strict compliance with MIL-STD-2073-1E, palletized according to DLA Packaging Requirements RP001, and marked per MIL-STD-129 with no special marking required. Preservation is to be achieved through cling/dry methods using bulk cushioning, and the unit container must be designated as EC with an open/sealed indicator of M. Inspection and acceptance occur at the destination facility located at 2083 Normandy Drive, Door 113 to 134, New Cumberland, PA 17070-5002, with no variance permitted in quantity. The contract mandates electronic invoicing through Wide Area WorkFlow (WAWF), and all hazardous materials must be accompanied by Safety Data Sheets and labeled in accordance with 29 CFR 1910.1200, while radioactively contaminated items must comply with MIL-STD-129 thresholds. Cybersecurity compliance is mandated through NIST SP 800-171 assessment requirements and CMMC Level 2 self-assessment for covered defense information, with the contractor required to adhere to DFARS 252.204-7012 for cyber incident reporting. The contract includes clauses on equal opportunity, trafficking in persons, employment verification, sustainable procurement, and subcontractor management, with no cost data provided in the solicitation, leaving pricing as an open item for offeror submission. Offerors must hold an active Unique Entity ID and CAGE code, and any small business or socioeconomic status claims must be validated in SAM. Proposals are to be submitted exclusively via the DLA Internet Bid Board System by August 20, 2026, with no physical submissions permitted. The type of contract, though referenced in FAR 52.216-1 Alternate I, remains undefined pending award.
Plate Work Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332911
New
DIBBS
VALVE, SAFETY RELIEF
Solicitation # SPE7MC-26-T-192U
This contract is for the procurement of two safety relief valves, identified by NSN 4820012839425 and manufactured by Emerson Automation Solutions. The valves feature a steel body with stainless steel trim and 1/2 inch flanged end connections. They are designed for a set pressure of 156 PSI, an adjustable range of 156 to 186 PSI, and a pressure rating of 180 PSI at 400 degrees Fahrenheit, adhering to ANSI B16.5 standards. This is designated as a critical application item. The agreement specifies strict compliance with DLA packaging and marking requirements, including MIL-STD-2073-1E and MIL-STD-129. A key environmental restriction prohibits the intentional addition of mercury or mercury-containing compounds in the hardware, preservation, or packaging. Delivery is set for the DLA Distribution New Cumberland facility in Pennsylvania, with a required delivery date of September 1, 2027, and a delivery window of 372 days.
Industrial Valve Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332911
New
DIBBS
VALVE, RESTRICTOR CH
Solicitation # SPE7MC-26-T-248Y
This contract is for the procurement of four restrictor check valves, identified by NSN 4820006178346 and part number 1R30613-041R from SAF Industries LLC. The items are designated as critical application items and must adhere to Class 3 thread standards. Delivery is required within 104 days, with a required delivery date of August 12, 2026, shipped FOB Origin to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The agreement mandates strict compliance with DLA Master List technical and quality requirements, including CMMC Level 2 self-assessment and the protection of covered defense information. Packaging must follow ASTM D3951 and MIL-STD-129 standards, with specific palletization requirements outlined in RP001. Inspection and acceptance will take place at the destination, and the contract specifies a zero percent quantity variance.
Industrial Valve Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333414
New
DIBBS
GUARD, FAN IMPELLER
Solicitation # SPE8E7-26-T-3812
This contract is for the procurement of 23 units of fan impeller guards, identified by NSN 4140015905141 and part number 13024786. The order is governed by solicitation number SPE8E7-26-T-3812 and requires adherence to technical and quality requirements set forth in the DLA Master List, including specific packaging standards under ASTM D3951 and MIL-STD-129. The items must be delivered FOB Origin to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania, with a required delivery date of September 17, 2026. Quality assurance will be managed through sampling methods consistent with MIL-STD-1916 or ASQ H1331, with inspection and acceptance occurring at the destination. The contract specifies a zero percent quantity variance and mandates the removal of government identification from any non-accepted supplies. Technical specifications are based on TDP Rev A Gen 1 drawing 19200 13024786, and the delivery timeline is set at 79 days after order.
Heating Equipment (except Warm Air Furnaces) Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 10 days
View Details
NAICS: 321114
New
DIBBS
ANTISEIZE COMPOUND
Solicitation # SPE8ES-26-T-2725
This contract is a solicitation for the procurement of seven units of antiseize compound, identified by NSN 8030-01-653-2475. The agreement is managed by the Department of Defense under the DDSP New Cumberland Facility, with a delivery requirement of 172 days after the order is received. Compliance with DLA master lists for technical and quality requirements is mandatory, and specific attention is given to packaging, physical item marking, and the removal of government identification from non-accepted supplies. A significant portion of the contract focuses on hazardous material compliance. Suppliers must adhere to the Hazard Communication Standard and Federal Standard 313-E, which requires the submission of Safety Data Sheets and compliant labels to the contracting officer for approval prior to the award. Additionally, the supplier is responsible for training employees on these safety standards and ensuring that all MIL-STD-129 labels include the appropriate lot or batch numbers.
Wood Preservation

POSTED

about 13 hours ago

DEADLINE

in 5 days
View Details