Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

This Solicitation opportunity from Department Of Energy was posted on September 27, 2024. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Fermilab - Daycare Center Crawl Space Supports

Closed
ISD-357300-RYKFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 238120
New
SLED
Corpyard Phase II Connex Structural Anchoring & Welding: (Rebid)
Solicitation # 26-091-ITB
The City of West Sacramento is soliciting bids under solicitation 26-091-ITB for the Corpyard Phase II project, which involves the structural anchoring and welding of fourteen existing shipping containers to a cement-treated asphalt surface. The scope of work includes container pre-checks, anchor installation, drilling and cleaning of holes using Bolthold, welded angle connections, and rust protection, all performed according to PSE stamped drawings and structural calculations. The project requires a final inspection by the City's Building department and special inspections during installation. The anticipated project value is 35,000 dollars, and the contract will be awarded to the lowest responsive and responsible bidder. Bidders must submit their proposals through the City's e-Procurement Portal by November 10, 2026, including a bid security of at least 10 percent of the total bid price. Requirements for the contractor include registration with the California State Department of Industrial Relations, compliance with prevailing wage rates, and adherence to various federal and state labor laws, including the Davis-Bacon Act, the Copeland Anti-Kickback Act, and Executive Order 11246. Additionally, contractors must provide a Workers' Compensation certification and comply with ISO standards for shipping container certification. The project is managed by Project Manager II Mubusi Muhapi and overseen by the Director of Capital Projects, Jaipal Chahal.
Capital Projects - Construction

POSTED

about 3 hours ago

DEADLINE

in 13 days

AI Contract Overview

Show more

This contract involves the removal and replacement of deteriorated crawl space jack posts and the demolition of existing concrete footings at the Fermilab Daycare Center in Batavia, Illinois. The project requires installing new, properly sized footings to ensure structural stability. The scope of work includes detailed tasks outlined in the project drawings and specifications, with the subcontractor responsible for providing all necessary supervision, labor, materials, tools, safety measures, and quality control to complete the construction in accordance with the provided technical documents. The work also encompasses transportation, overhead costs, bonding, and safety oversight, emphasizing comprehensive project management and adherence to quality standards. Fermilab has designated a Construction Coordinator to oversee the project, and the subcontractor must ensure all activities meet the specified requirements, including confined space training for work within crawl spaces. The project timeline is set with a response deadline of October 11, 2024, and the work must be performed in compliance with applicable safety, environmental, and quality standards. The contract falls under NAICS code 238120, indicating specialized construction services related to structural supports, and is managed by the Department of Energy through Fermilab. Interested parties can find further details and submit proposals via the provided link.

General Info

NAICS

238120 - Structural Steel and Precast Concrete Contractors

Place of Performance

Batavia, IL, 60510, USA

Set-Aside

NONE

Documents

11

Daycare Center Crawl Space Supports RFP

PDF, High priority: read this firstrfp
High

General Decision Number IL20240008 - Wage Determinations

PDF, High priority: read this firstwage-determination
High

ISD-354053-RK Proposal Form

PDF, High priority: read this firstrfp
High

Project 10-2-153 Daycare Center Crawl Space Supports Drawings

PDF, High priority: read this firstspecifications
High

Project ISD 10-2-153: Daycare Center Crawl Space Supports - General Requirements

PDF, High priority: read this firstspecifications
High

Project ISD-357300-RK: Daycare Center Crawl Space Supports Subcontract

PDF, High priority: read this firstcontract-document
High

Section 013100 - Environment, Safety, and Health Requirements

PDF, High priority: read this firstspecifications
High

Section 013300 - Submittals

PDF, High priority: read this firstspecifications
High

Section 014100 - Quality Requirements (March 2024)

PDF, High priority: read this firstspecifications
High

SOW - Daycare Center Crawl Space Supports (Rev 1)

PDF, High priority: read this firstsow
High

FRA Form FL-42 Payment Bond

PDF, Low priorityother
Low

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseClosed
Posted

Solicitation

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Energy → Fermilab - DOE Contractor
Contacts1 person available
OfficeBatavia, IL, 60510, USA
Office AddressBatavia, IL, 60510, USA

Full Description

Show more
1.0 INTRODUCTION AND BACKGROUND Fermilab is requesting a proposal for removal and replacement of crawl space jack posts, demolition of existing concrete footings, and installation of new footings at the Daycare Center building. The existing jack posts are in various stages of deterioration and require replacement. Additionally, the existing footings are undersized and new footings are required. 2.0 SCOPE Provide all work as shown on : ? Drawing set for ISD Project 10-2-153 ? Specification Sections: o 010010 GENERAL REQUIREMENTS o 013100 ENVIRONMENT, SAFETY, AND HEALTH REQUIREMENTS o 013300 SUBMITTALS o 014100 QUALITY REQUIREMENTS The Subcontractor shall furnish all required supervision, labor, materials, tools, plant and appurtenances necessary to perform diligently and fully all work as described in the drawings and technical specifications. All work includes transportation, overhead, bonding costs, safety oversight, quality control oversight, and supervision as required to construct the project described in the drawings and technical specifications. The Subcontractor's scope of work is not limited to the general work outline described herein. The Subcontractor shall perform all work required to complete the construction work in accordance with the drawings and/or specifications. The description and quantities listed are general in nature and are only intended to describe the range and complexity of this scope of work. The description and quantities provided below are not to be used as the basis for establishing a cost proposal. Specific quantities and definitions of the scope of work for providing a proposal shall be based solely on estimates developed by the Offer from the drawings, specifications, and the information obtained from examining of the project site. Confined space training is required for work in the crawl spaces. 3.0 DELIVERABLES The Subcontractor shall perform all work required to complete the construction work in accordance with the drawings and specifications. 4.0 QUALITY ASSURANCE A Fermilab Construction Coordinator will be assigned to this project. See Specification Section 010010, GENERAL REQUIREMENTS. The Subcontractor is responsible for all activities necessary to manage, control, and document that work complies with the Subcontract documents. The Subcontractor's responsibility includes ensuring adequate Quality Control services are provided for work accomplished on- and off-site by his/her organization,

More opportunities from Department Of Energy → Fermilab - DOE Contractor

Same awarding agency

NAICS: 332323
New
Federal
Bar Grating and Saddle Clips
Solicitation # 388000kmb
Fermi Forward Discovery Group, LLC is soliciting firm-fixed price proposals under RFP 388000kmb for the fabrication and delivery of hot-dipped galvanized carbon steel bar grating and associated saddle clips. These materials are required for the VD Cryostat Roof Decking as part of the LBNF/DUNE project. The scope includes various sizes of bar grating with bearing bars measuring 1.5 inches tall by 3/16 inches thick and 19-W-4 spacing, along with Type W44 and W10 saddle clips. Technical requirements specify a minimum live load of 100 PSF, a minimum concentrated load of 1000 LB, and a maximum deflection of 0.25 inches. Proposals must be submitted via email to Karen Berger by 5:00 PM CT on November 6, 2026. A complete submission package requires a proposal including lead times, a completed first page of the RFP, the Subcontractor Annual Representations and Certifications (SARC), and the PROC-FRM-466 Proposal Certifications. Award will be based on the Lowest Price Technically Acceptable (LPTA) selection process, with a strong emphasis on strict adherence to technical specifications and FFDG terms and conditions to avoid disqualification. Delivery is required FOB Destination to the Dakota Warehouse in Rapid City, South Dakota. All items must be bundled and packaged to comply with the Ross Shaft Load Envelopes and Shipping Expectation guidelines to ensure compatibility with warehouse handling capabilities. Post-award deliverables include a detailed logistics and shipping plan and all applicable operator manuals. The contract is subject to various federal regulations, including Buy American requirements and FAR anti-discrimination laws.
Ornamental and Architectural Metal Work Manufacturing

POSTED

5 days ago

DEADLINE

in 9 days
View Details
NAICS: 332911
New
Federal
PIP-II CM 2K Pressure Safety Device - Rupture Disks
Solicitation # 387878-DSF
Fermi Forward Discovery Group, LLC, operating the Fermi National Accelerator Laboratory (Fermilab), is soliciting firm-fixed price proposals under solicitation 387878-DSF for the procurement of thirty-three cryogenic non-reclosable rupture disk cartridges. These components are required for the Proton Improvement Plan II (PIP-II) Cryomodule relief system and must be designed for sub-atmospheric cryogenic conditions of approximately 2 K and 30 mbar absolute pressure. The requirement includes disks with set pressures of 3.1 barg and 1.75 barg, constructed from Inconel, and equipped with normally closed burst alert sensors on the outlet. All disks must be ASME Section VIII Code NB/UD stamped and meet a helium leak rate specification of 10^-8 atm-cc/sec. Proposals must be submitted via email to Seth Fryar by October 30, 2026, at 2:00 PM Central Time. Submissions must include a technical proposal demonstrating merit and five years of relevant experience, a delivery schedule, and a price proposal using the provided Exhibit F pricing sheet. Award will be granted to the lowest evaluated proposal that meets all technical and past performance acceptability standards. The contract requires strict adherence to various federal regulations, including the Buy American Act, FAR anti-discrimination laws, and DOE site access and safety requirements. Delivery is FOB Destination to Batavia, Illinois, where Fermilab will conduct visual, mechanical, and certification inspections within two weeks of receipt.
Industrial Valve Manufacturing

POSTED

5 days ago

DEADLINE

in 2 days
View Details
NAICS: 331491
Federal
PIP-II Niobium Sheets, Rings, and Disks
Solicitation # 385634-DSF
Fermi National Accelerator Laboratory (FNAL), through the Fermi Forward Discovery Group, LLC, is soliciting firm-fixed price proposals for the manufacturing, testing, certification, and delivery of high-purity Niobium and Niobium-Alloy components. These materials, which include RRR300 Niobium sheets, Nb55Ti rings and disks, and forged Niobium rings, are critical for superconducting radio-frequency cavities used in the Proton Improvement Plan II (PIP-II) project. All deliverables must adhere to strict technical specifications, including a Residual Resistivity Ratio (RRR) value greater than 300 and compliance with ASTM B-391, B-393, and E-8/E-384 standards. Materials must be delivered FOB Destination to Batavia, Illinois, with specific requirements for non-abrasive packaging and permanent product inscription for traceability. Proposals are due by November 10, 2026, and must be submitted in two separate volumes: a technical proposal and a business/price proposal. Evaluation is based on a best-value trade-off where technical merit, quality assurance plans, and past experience are significantly more important than price. Offerors must provide a minimum of three relevant examples of similar work from the past five years and a detailed project schedule. Mandatory submissions include the SARC (PROC-FRM-100) and Proposal Certifications (PROC-FRM-466) forms. The contract incorporates various Federal Acquisition Regulation (FAR) and Department of Energy Acquisition Regulation (DEAR) clauses, including strict prohibitions against racially discriminatory DEI activities under FAR 52.222-90 and compliance with the Buy American Act.
Nonferrous Metal (except Copper and Aluminum) Rolling, Drawing, and Extruding

POSTED

9 days ago

DEADLINE

in 13 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS