This Government Contract opportunity from Department Of Defense was posted on September 4, 2020. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Fiber Reinforced Polymer (FRP) Composite Laminates and Sandwich Panels

Awarded

W9132T20Q0071Federal

Submission Closed08/28/2020, 12:00:00 AM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 326130

New

DIBBS

Supply of Nonmetallic Special Shaped Rubber SectionsThis subcontract, managed by Construction & Equipment MRO SVC I for the Department of Defense, involves the supply of 142 nonmetallic special shaped rubber sections to support DLA Troop Support contracts. The required components must meet NSN 9390-00-554-9674 and technical standard ASTM D 2000 M 3 BE 610 A14 E014 F19 Z32Z. Performance will take place at Tinker AFB, with all deliverables adhering to NAICS code 326130. The contractor is responsible for manufacturing or sourcing the rubber sections and ensuring all packaging and marking comply with MIL-STD-2073-1E and MIL-STD-129. Additionally, the provider must supply Material Safety Data Sheets for any hazardous compounds in accordance with 29 CFR 1910.1200. The response deadline for this requirement is October 30, 2026.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

Rubber Rod Separator FabricationThis subcontract involves the molding and fabrication of 47,000 rubber rod separators for the Department of Defense, specifically supporting the DLA Weapons Support Fluid Handling Division. The components must be manufactured from Buna-N Nitrile rubber in accordance with material specification MIL-R-6855 Class 1, Grade 60. The project requires the use of industrial rubber molding equipment to produce finished units under NSN 2040010595673. The contract mandates strict compliance with the Berry Amendment and the Buy American Act. Performance will take place in New Cumberland, Pennsylvania. Interested parties must adhere to the timeline established by the October 15, 2026, posting date and the October 26, 2026, response deadline.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Closed-Cell Foam Insulation Sleeving SupplierThis subcontract involves the supply of closed-cell foam insulation sleeving for prime contractors working on DLA Weapons Support ASC projects. The selected supplier is responsible for manufacturing or sourcing 51 sheets of sleeving that strictly adhere to NSN 5970-01-569-8822 specifications. All materials must be delivered to DLA Distribution San Diego and must comply with MIL-STD-129 and RP001 packaging and palletization standards. Critical regulatory requirements for this contract include full compliance with the Berry Amendment and adherence to DFARS cybersecurity standards. The project falls under NAICS code 326130 and is managed by the Department of Defense through the DLA Weapons Support ASC Commodities Division.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of High-Performance Rubber O-Rings (NSN 5331-01-478-9901)This subcontract involves the manufacture or procurement of 507 high-performance rubber O-rings for the DLA Weapons Support Land Supply Chain. The required parts must match NSN 5331-01-478-9901, Apple Rubber P/N AS-568A-248, or Oshkosh Corp P/N 3018994. All supplied materials must be certified as asbestos-free and adhere to strict military standards, specifically MIL-DTL-117 Type II Class C Style 1 for packaging and MIL-STD-129 for marking. The completed and certified units are to be delivered to DLA Distribution San Joaquin in Tracy, California. This requirement falls under NAICS code 326130 and is intended for prime contractors fulfilling Department of Defense supply contracts.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Manufacture and Supply of Preformed Packing (NSN 5330-01-521-6934)This subcontract involves the manufacture and supply of three preformed packing units, identified by NSN 5330-01-521-6934, for prime contractors supporting the DLA Weapons Support Land Supplier. The selected provider must fabricate the units according to specific technical drawings and ensure all products undergo quality assurance testing in accordance with MIL-STD-1916 or ASQ H1331 standards. The project is managed under the Department of Defense and requires strict adherence to ITAR and EAR compliance regulations. Additionally, the contractor must hold CMMC Level 2 certification to be eligible. The response deadline for this requirement is October 26, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Nashville Electric Service is soliciting bids for the procurement of five units of compressed fibrous electrical insulating sheets, specifically board panels measuring 1/4 inch by 4 feet by 8 feet. The required material must be in either black or brown and is specified as Mason-Arboron, Mason-Phenelx, or an approved equal. If an alternate brand is proposed, vendors must specify the brand in the comments field and provide supporting descriptive literature. Bids must be submitted through the Bid Center by 2:00 pm local time on October 21, 2026. A critical component of the evaluation process is the delivery timeline, as bidders are required to state their earliest delivery in calendar days, which may influence the final award decision. The primary procurement contact for this solicitation is Shanna Faulk.

Nashville Electric Service

POSTED

DEADLINE

ANG A5 BPA - Purchase of Poly Plates (FY27)The Federal Acquisition Service, under the General Services Administration, has issued a forecast for the ANG A5 BPA regarding the purchase of Poly Plates for fiscal year 2027. This procurement action is intended to establish a Blanket Purchase Agreement to streamline the acquisition of these specific materials. Interested parties may seek further information by contacting Harvelle Fuller, the primary point of contact, or Alex Stutzman, the Small Business Specialist. Additional details regarding the requirement can be accessed through the Acquisition Gateway portal.

Federal Acquisition Service

POSTED

DEADLINE

Manufacturing of Protective Dust and Moisture Seal CapsThis subcontract involves the manufacturing of 272 protective dust and moisture seal caps for the DLA Weapons Support Land Supply Chain under the Department of Defense. The contractor is responsible for fabricating the caps according to NSN 5340-01-611-4725 and the DLA Master List of Technical and Quality Requirements. Production must utilize industrial molding or casting equipment and moisture-resistant polymers or rubber compounds, with strict adherence to the Buy American Act and the Berry Amendment. The project falls under NAICS code 326130 and will be performed in New Cumberland, Pennsylvania. Interested parties must respond by October 23, 2026, to support prime contractors delivering these essential components for DLA supply contracts.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Closed Cell Foam Gasket FabricationThis subcontract involves the fabrication of 170 closed cell foam rubber gaskets for the Department of Defense, specifically supporting DLA Weapons Support Land Supplier Operations. The gaskets must be manufactured from Class CR chloroprene rubber with adhesive on one side, adhering to nominal dimensions of 0.1875 inches in thickness and 0.500 inches in width. Finished items are required to be marked and packaged in MIL-DTL-117 Type II Class C Style 1 waterproof bags. Compliance with the Buy American Act and CMMC Level 2 certification is mandatory for this engagement. The work will be performed in New Cumberland, Pennsylvania, under NAICS code 326130. Interested parties must respond by October 23, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Plain Seal Extrusion SupplierThis subcontract involves the manufacture and supply of 72 units of specialized plain seal extrusions for the Department of Defense, specifically supporting DLA Weapons Support Land Supplier Ops. The extrusions must be produced in 120-inch lengths and adhere strictly to Boeing P/N 10-60754-15 or Kirkhill Inc P/N 5673-15A specifications. All delivered materials must be free of Class I ozone-depleting chemicals and intentionally added mercury, while remaining in full compliance with the Buy American Act. The project falls under NAICS code 326130 and is designated for performance at Tinker AFB. Interested parties should note the response deadline of October 23, 2026, for this requirement concerning NSN 5330013047759.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Manufacturing of Dust and Moisture Seal BootsThis subcontract involves the precision molding of rubber or synthetic polymer dust and moisture seal boots for the Department of Defense, specifically supporting the DLA Weapons Support Electrical Devices Division. The contractor is responsible for fabricating nine finished seal boots, identified by part number N5040RED and NSN 5930-01-517-7656, utilizing industrial molding presses at a performance location in New Cumberland. The project requires strict adherence to several regulatory and technical standards, including the DLA Master List of Technical and Quality Requirements (RA001), DFARS 252.204-7012, and the Buy American Act. The procurement falls under NAICS code 326130, with a response deadline set for October 23, 2026.

DLA WEAPONS SUPPORT ELECTRICAL DEVICES DIV

POSTED

DEADLINE

Rubber/Polymer Gasket Fabrication (NSN 5330-01-289-6585)This subcontract involves the fabrication of 76,000 rubber or polymer gaskets for prime contractors supporting the Department of Defense DLA Weapons Support Land Supplier Opns Vehicle Spt. The manufacturer must produce the gaskets according to TDP Rev A Gen 2 and Basic Drawing NR 19207 11629471 Revision K using precision cutting or molding equipment. All finished products must strictly adhere to technical drawing specifications and be delivered to New Cumberland. Critical compliance requirements include the use of asbestos-free materials and full adherence to the Buy American Act and the Berry Amendment. Additionally, the performing contractor must hold CMMC Level 2 certification. The solicitation was posted on October 12, 2026, with a response deadline of October 23, 2026, under NAICS code 326130.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

9 days ago

DEADLINE

in 2 days

AI Contract Overview

The U.S. Army Engineer Research and Development Center, Construction Engineering Research Laboratory, is requesting quotes for the procurement of custom fiber reinforced polymer composite laminates and sandwich panels. The requirement includes ten 13 x 25 laminates, ten 25 x 25 laminates, and twenty-five sandwich panels, all of which must be manufactured using a vacuum infusion process for use in navigation structures. This acquisition is designated as a small business set-aside under solicitation number W9132T20Q0071. To be considered technically acceptable, all offers must include the specific information detailed in the Section L instructions. Eligible vendors must be actively registered in the System for Award Management with no active exclusions and completed representations and certifications. Responses must be submitted electronically to the designated email address by the specified deadline, as telephone responses will not be accepted.

General Info

Agency

Department Of Defense → W2R2 Construction Engrg Labor

Contract Value

$58,378.3

NAICS

326130 - Laminated Plastics Plate, Sheet (except Packaging), and Shape Manufacturing

Place of Performance

IL, USA

Set-Aside

NONE

Awardee

NEXGEN COMPOSITES LLC

Award Issued Date

08/28/2020, 12:00:00 AM UTC

Documents

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

5 updates

PhaseAwarded

PostedJul 9

Combined Synopsis

Notice updatedJul 20

Response deadline changed from Jul 20, 2020 to Jul 31, 2020. The notice description changed.

Notice updatedJul 20

The notice description changed.

Notice updatedJul 21

The notice description changed.

Notice updatedJul 28

The notice description changed.

Notice updatedSep 4

Notice details unchanged. Attachments may have changed.

AwardedAug 28

Contract was awarded

Submission Closed

08/28/2020, 12:00:00 AM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → W2R2 Construction Engrg Labor

Contacts1 person available

OfficeCHAMPAIGN, IL, 61822-1072, USA

Organization / AgencyDepartment Of Defense → W2R2 Construction Engrg Labor

Office AddressCHAMPAIGN, IL, 61822-1072, USA

Contacts

Deyonna R Poke

contact@example.gov

+1 (555) 000-0000

Full Description

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation: quotes are being requested and a written solicitation will not be issued. The solicitation number is W9132T20Q0071 and is being issued as a request for quotation (RFQ). *** Note: All offers submitted must include the information detailed in the Section L instructions of the attached solicitation in order to be determined technically acceptable.*** The U.S. Army Engineer Research and Development Center (ERDC), Construction Engineering Research Laboratory (CERL) has a requirement for the procurement of ten (10) 13 x 25 fiber reinforced polymer (FRP) composite laminates, ten (10) 25 x 25 FRP composite laminates, and twenty-five (25) FRP composite sandwich panels for the implementation of FRP composites in Navigation structures. The laminates and panels will be custom built to the government specified dimensions using a vacuum infusion process. THIS ACQUISITION IS A SMALL BUSINESS SET-ASIDE. Please reference the attached RFQ for all applicable provisions and clauses. Please provide responses to this notice no later than July 20, 2020 at 11:59 AM, Central Standard Time (CST), to: CERL-CT-QUOTES@usace.army.mil Telephone responses will not be accepted. In order to be eligible for award of a Government contract, vendors must be actively registered in the System for Award Management (SAM), have no active exclusions, and complete representations and certifications. This system combines data that was formerly contained in the Central Contractors Registration (CCR), Online Representation and Certifications (ORCA), and the Excluded Parties List System (EPLS). For more information, review the SAM website at https://www.sam.gov.