This Solicitation opportunity from Department Of Homeland Security was posted on January 9, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

FILTER REPLACEMENT KIT

Closed

70Z08526Q30022B00Federal

Submission Closed01/26/2026, 06:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 339991

New

DIBBS

SEAL ASSEMBLY, SHAFT, SP

Solicitation # SPE7M1-27-T-1778

This solicitation, issued by the DLA Weapons Support Maritime Supply Chain, is a small business set-aside for the procurement of 25 spring-loaded shaft seal assemblies under NSN 4320-01-140-4084. The requirement is categorized under NAICS code 339991, with a delivery timeframe of 116 days after order and a designated delivery location in Jacksonville, Florida. The government specifies that items must be delivered FOB Destination and prohibits the use of additive manufacturing for the production of these components. The contract mandates strict adherence to DLA packaging and quality standards, specifically referencing RP001 for palletization, ASTM D3951 for general packaging, and MIL-STD-129 for marking and labeling. Technical data associated with this item is subject to export control under ITAR or EAR regulations, requiring contractors to have approved US/Canada Joint Certification Program certification. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and compliance with various DFARS clauses regarding cybersecurity, the Buy American Act, and the prohibition of hexavalent chromium. Inspection and acceptance will occur at the destination.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Solicitation # SPE7L3-27-T-1579

Solicitation SPE7L3-27-T-1579 is a request for quotations issued by the DLA Weapons Support Land Supplier Operations Vehicle Support for the procurement of seven plain encased seals, identified by NSN 5330-00-821-2374 and part number CB124-23. This is designated as a critical application item, and the materials must be free of asbestos as defined in FED-STD-313. The delivery requirement is 20 days after receipt of order, with a required delivery date of November 2, 2026. Shipping is FOB Origin, and the items are to be delivered to the German Armed Forces Command USA in Dulles, Virginia. The contract mandates strict adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Due to the risk of ultraviolet deterioration, the seals must be sealed in medium duty, waterproof, greaseproof, opaque bags per MIL-DTL-117. Technical and quality requirements are further governed by DLA master list items RP001 and RQ011. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with various FAR and DFARS clauses, including the Buy American and Balance of Payments Program, NIST SP 800-171 assessment requirements, and basic safeguarding of covered contractor information systems. Quotations are due by November 9, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Solicitation # SPE7L3-27-T-1591

Solicitation SPE7L3-27-T-1591 is a request for quotations issued by the DLA Weapons Support Land Supplier Opns Vehicle Spt for the procurement of 12 gaskets under National Stock Number 5330-01-687-9713. The contract is managed by Susan Diamond and utilizes the First Destination Transportation program to minimize costs through Government-Arranged Transportation. Delivery is required within 10 days after receipt of order, with an original required delivery date of July 23, 2026, and an FOB origin shipping term to a destination in Jordan. The contractual end items must be free of asbestos and require specific packaging to prevent deterioration from ultraviolet rays, necessitating the use of medium duty, waterproof, greaseproof, opaque bags per MIL-DTL-117, Type II, Class C, Style 1. All packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, with special marking code 33 applied for shelf life. The procurement is subject to the Buy American Act and Berry Amendment, and it prohibits the use of additive manufacturing for the items unless authorized. Payment and invoicing are processed electronically through the Wide Area WorkFlow system. Inspection and acceptance will occur at the destination.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Solicitation # SPE7M2-27-T-0547

Solicitation SPE7M2-27-T-0547 is a small business set-aside request for quotations issued by the DLA Weapons Support Nuclear Reactor Program for the procurement of 941 units of a packing assembly, identified by NSN 5330-00-202-2602. The items are composed of nylon and synthetic rubber and must comply with technical specifications MIL-S-19622F SUP 1 and MIL-S-19622/20H. Delivery is required within 184 days after order, with a need ship date of May 13, 2027, and a final delivery date of June 25, 2027, to DLA Distribution San Diego, California. The contract is established as FOB Origin, with inspection and acceptance occurring at the destination. The procurement includes stringent quality and safety requirements, including a total prohibition of asbestos per FED-STD-313 and strict controls on mercury containment according to NAVSEA 5100-003D. Packaging must adhere to MIL-STD-2073-1E and RP001, while marking must comply with MIL-STD-129 and MIL-STD-130N, specifically utilizing special marking code 32 for shelf life. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and compliance with various FAR and DFARS clauses regarding cybersecurity, the Buy American Act, and the Berry Amendment. Quotations must be submitted via DIBBS by November 9, 2026.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

SEAL, SPLIT, INFLATAB

Solicitation # SPE7L3-27-T-1592

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Solicitation # SPE7L3-27-T-1587

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Solicitation # SPE7M2-27-T-0554

Solicitation SPE7M2-27-T-0554 is issued by the DLA Weapons Support Nuclear Reactor Program for the procurement of 27 units of O-rings, identified by NSN 5331013888627 and Parker-Hannifin Corp part number 2-220N525-60. The items must be provided in accordance with TDP Rev A Gen 1 and are classified as Type I (Code Y) with a non-extendable shelf life of 180 months. Delivery is required within 167 days after receipt of order, with inspection and acceptance occurring at the destination. The contract specifies that mercury or mercury-containing compounds shall not be intentionally added to the hardware, with limited exceptions for functional requirements. The procurement is governed by NAICS code 339991 and requires compliance with the Buy American and Balance of Payments Program, as well as the Berry Amendment. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, with specific palletization requirements under RP001. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and payment. Evaluation factors include a price preference for HUBZone concerns, and the use of additive manufacturing is strictly prohibited unless specifically authorized. The contract also incorporates standard FAR and DFARS clauses regarding equal opportunity, cybersecurity reporting, and the safeguarding of covered defense information.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

Solicitation # SPE7M2-27-T-0559

Solicitation SPE7M2-27-T-0559 is a request for quotations issued by the DLA Weapons Support Nuclear Reactor Program for the procurement of 1,053 square feet of solid synthetic rubber sheeting, identified as NSN 9320-00-395-3529. This critical application item must adhere to MIL-R-83248 Type 2 Class 1 and SAE AMS3216J Revision J standards. The material specifications require a width between 35.000 and 37.000 inches, a thickness between 0.050 and 0.070 inches, and a maximum length of 901.000 inches. Performance requirements include a Shore Durometer A hardness rating between 70.0 and 80.0, a minimum tensile strength of 1,600 pounds per square inch, and resistance to compression, high temperatures, and fluids. The product must be free of asbestos and intentionally added mercury. The contract mandates a delivery lead time of 105 days after the order, with shipping terms set as FOB Origin and delivery to Tracy, California. Quality assurance is stringent, requiring a Certificate of Quality Compliance and sampling conducted per MIL-STD-1916 or ASQ H1331. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-190. Administratively, the procurement is a total small business set-aside under FAR 19.5, though some sections of the document contain conflicting notes regarding set-aside status. Key regulatory requirements include compliance with the Buy American Act, DFARS cybersecurity reporting standards, and the use of the Wide Area WorkFlow system for electronic invoicing. Quotations are due by November 9, 2026.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

Solicitation # SPE7L1-27-U-0159

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Solicitation # SPE7L3-27-T-1594

This solicitation, issued by the Department of Defense through the Defense Logistics Agency (DLA) Weapons Support Land Supplier Operations Vehicle Support, is a request for quotations for eight hatch seals, identified by NSN 5330-00-553-0148. The procurement is categorized under NAICS code 339991 and requires delivery within five days after receipt of order. The contract specifies that items must be packaged in medium duty, waterproof, greaseproof, opaque bags per MIL-DTL-117 and marked according to MIL-STD-129, including a do not bend warning. Inspection and acceptance are both set at the point of origin, with quality conformance governed by RQ006 and specific zero-based sampling plans. Compliance requirements are extensive, including CMMC Level 2 certification via a C3PAO and adherence to DFARS 252.204-7012 for safeguarding covered defense information. The technical data is subject to export control under ITAR or EAR, requiring contractors to have an approved US/Canada Joint Certification Program certification. Evaluation for award will consider price, with a specific preference for certified HUBZone Small Business Concerns, while any offers utilizing additive manufacturing are ineligible. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and strict adherence to domestic material restrictions, such as the Buy American Act and the Berry Amendment.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

SEAL, NONMETALLIC SPECI

Solicitation # SPE7L3-27-T-1585

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Solicitation # SPE4A5-27-T-2082

Solicitation SPE4A5-27-T-2082 is a request for quotations for the procurement of plain seals, identified by NSN 5330-01-340-2724 and part number 70205-83002-133. The requirement consists of two line items totaling 38 units, with 13 units destined for DLA Distribution San Diego and 25 units for DLA Distribution Jacksonville. The items are designated as critical application items with a shelf life of 180 months. Delivery is required within 171 days after the order, with a need ship date of April 27, 2027, and an original required delivery date of July 3, 2027. Shipping terms are FOB Origin, and both inspection and acceptance will occur at the destination. The contract mandates strict adherence to technical and quality requirements, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Due to the risk of deterioration from ultraviolet rays, the seals must be sealed in medium duty, waterproof, greaseproof, opaque bags per MIL-DTL-117. While item unique identification is not required, the contractor must follow specific DLA packaging and palletization requirements. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and compliance with various FAR and DFARS clauses regarding cybersecurity, domestic sourcing under the Buy American Act, and the prohibition of covered telecommunications equipment. The procurement is managed by the DLA Weapons Support ASC Supplier Oper OEM Division.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days

AI Contract Overview

This contract solicitation, issued by the Department of Homeland Security through the SFLC Procurement Branch 2 in Alameda, California, seeks the procurement of specific replacement parts for use on U.S. Coast Guard vessels, specifically 418-foot WMSL cutters. The primary items requested are 100 units of a filter replacement kit (NSN 4940-01-632-1375, Part Number 1001860) and 60 units of a gasket (NSN 5330-01-493-9780, Part Number 40-1023). The filter replacement kit is designed as a direct form, fit, and function replacement for the oil mist filters used on crankcase breathers equipped with CCE AirSep systems, including accompanying O-rings, and individually packaged to meet stringent military packaging standards (MIL-STD-2073-I and MIL-STD-129R), ensuring durability and protection against environmental factors. The gasket is described as an air separator lid gasket for a 16-inch can, similarly packaged to meet military shipping and marking standards with barcoding according to ISO/IEC symbology. The contract follows established Federal Acquisition Regulation clauses to ensure compliance with relevant commercial acquisition laws, certifications, and requirements, providing a structured legal and administrative framework. All shipping and freight charges are to be incorporated into the total price. The solicitation references precise packaging and labeling standards to uphold the logistics and handling conditions required by military protocols. The place of performance is Curtis Bay, Maryland, and responses to the solicitation are due by January 26, 2026. Primary and secondary points of contact are designated for communication and clarification, emphasizing a structured procurement process to support the vessel maintenance and lifecycle needs of the Coast Guard’s cutter fleet.

General Info

Procurement of 100 filter kits and 60 gaskets for Coast Guard vessels, packaging meets military standards.

Agency

Department Of Homeland Security → Sflc Procurement Branch 2(00085)

NAICS

339991 - Gasket, Packing, and Sealing Device Manufacturing

Place of Performance

Curtis Bay, MD, 21226, USA

Set-Aside

NONE

Documents

FAR Clauses Incorporated by Reference (Sep 2021)

12 pages · contract-clauses

High

Solicitation 70Z08525Q30022B00 - Filter Replacement Kit and Gasket

rfq

High

AI Contract Breakdown

Uniform Contract Format

Timeline

PhaseClosed

PostedJan 9

Solicitation

Response DeadlineJan 26

Deadline has passed

Submission Closed

01/26/2026, 06:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Homeland Security → Sflc Procurement Branch 2(00085)

Contacts2 people available

OfficeALAMEDA, CA, 94501, USA

Organization / AgencyDepartment Of Homeland Security → Sflc Procurement Branch 2(00085)

Office AddressALAMEDA, CA, 94501, USA

Contacts

Carlos Diaz Garcia

Daniel J. Nieves

Full Description

NOMENCLATURE: KIT, FILTER REPLACEMENT

NSN: 4940-01-632-1375

PART #:1001860

U/I: KT

QTY: 100

SPEC/ DESCRIPTIVE DATA: FILTER REPLACEMENT KIT, WALKER PART NUMBER: 1001860
OIL MIST FILTER,
W/ O-RINGS (SINGLE PACK).
DIRECT REPLACEMENT - SAME FORM, FIT, FUNCTION, TO SERVICE USCG WIMSL MDE'S EQUIPPED
WITH CCE AIRSEP. SERVICE AIRSEP KIT NUMBER, KWCCEMTU20V1163-2R AND AIRSEP PART
NUMBER, 1001750. FIELD SERVICE KIT USED TO REPLACE THE FILTER ELEMENTS ON THE
CRANKCASE BREATHER. END USE IS 418' WMSL CUTTERS
INDIVIDUALLY PACKAGED IN ACCORDANCE WITH MIL-STD-2073-I E METHOD 10, USING WEATHERRESISTANT
PAPERBOARD FOLDING WITH WATERPROOF BARRIER MATERIALS AND CUSHIONED, AS
NEEDED IN BUBBLE-WRAP, BAGGED AND PACKED IN AN APPROPRIATELY SIZED ASTM-D5118
DOUBLE-WALL FIBERBOARD BOX. BAG CLOSURE SHALL BE EFFECTED BY HEAT-SEALING,
ADHESIVES, OR TAPING. OTHER TYPE BAG CLOSURES SUCH AS PRESSURE-FIT, ZIPPER, AND
OTHERS, ARE ACCEPTABLE. PLACED INSIDE OF BAG SHALL BE DESICCANT IN ACCORDANCE WITH
TYPE II OR III OF MIL-D-3464. MARKING IAW MIL-STD-129R

NOMENCLATURE: GASKET

NSN:5330-01-493-9780

PART #: 40-1023

U/I: EA

QTY: 60

SPEC/ DESCRIPTIVE DATA:GASKET
AIR SEP LID, GASKET, 16INCH CAN
INDIVIDUALLY PACKAGED IN
ACCORDANCE WITH MIL-STD-2073-LE METHOD 10,
PACKED IN AN
APPROPRIATELY SIZED ASTM-DS 118 DOUBLE-WALL
FIBERBOARD BOX.
MARKING IAW MIL-STD-129R EXCEPT BAR CODED IAW
ISO/IEC-16388-2007, CODE 39 SYMBOLOGY.
PACKAGE LABEL:
ITEM NAME:
PART NUMBER:
NSN:
QNTY: (EXAMPLE 1 EA)
COND-A
CONTRACT NUMBER / ORDER NUMBER

PLEASE READ ATTACHMENTS

INCLUDE ALL SHIPPING AND FREIGHT CHARGES IN TOTAL PRICE

More opportunities from Department Of Homeland Security → Sflc Procurement Branch 2(00085)

Same awarding agency

FILTER REPLACEMENT KIT

Contract Overview

Active Opportunities Like This One

AI Contract Overview

General Info

Documents

AI Contract Breakdown

Timeline

Find active opportunities like this

Organization & Contact Information

Full Description

More opportunities from Department Of Homeland Security → Sflc Procurement Branch 2(00085)

Earlier notices in this NAICS code

Get AI-powered intelligence on the opportunities still open