Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 14 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

Fire Ambulance Maintenance and Medical Equipment Calibration

Active
State & Local

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for Fire Ambulance Maintenance and Medical Equipment Calibration involves providing specialized maintenance and inspections for prime contractors operating within California Department of Corrections and Rehabilitation facility projects. The scope of work includes performing routine mechanical maintenance on ambulance chassis as well as conducting critical safety inspections and calibrations for onboard medical equipment. To successfully execute these tasks, the contractor must utilize ambulance-specific diagnostic tools and ensure all personnel are cleared for entry onto state property. The primary objective of the contract is the delivery of certified operational ambulances accompanied by signed Service Reports. Interested parties should note that the response deadline is December 1, 2026, and the work falls under NAICS code 811112. This engagement requires a high level of technical expertise to maintain the safety and functionality of emergency medical vehicles within a secure state environment.

General Info

Subcontract for ambulance maintenance and medical equipment calibration for California state prison projects.

Agency

California Department of Corrections & Rehabilitation

NAICS

811112 - Automotive Exhaust System Repair

Place of Performance

CA, USA

Set-Aside

NONE

Documents

This scope was carved out of C5613691-D.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

C5613691-D - Fire House Fleet Maintenance and Repair Services

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

Posted

subcontract

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyCalifornia Department of Corrections & Rehabilitation
ContactsNo contacts available
OfficeN/A
Organization / AgencyCalifornia Department of Corrections & Rehabilitation
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Performs specialized maintenance and inspections for prime contractors on California Department of Corrections & Rehabilitation (CDCR) facility projects. Executes routine mechanical maintenance on ambulance chassis and conducts safety inspections and calibrations specific to ambulance medical equipment. Requires ambulance-specific diagnostic tools. Personnel must be cleared for state property entry. Delivers certified operational ambulances and signed Service Reports.

Similar Contracts

Same NAICS industry code

NAICS: 811112
New
SLED
Heavy Fire Apparatus (Type 1, 3, 6) Mechanical ServicesThis subcontract for Heavy Fire Apparatus Mechanical Services involves providing comprehensive maintenance and repair for Type 1, 3, and 6 vehicles at California Department of Corrections and Rehabilitation facility projects. The scope of work includes performing monthly, quarterly, semi-annual, and annual preventative maintenance, as well as calibrations and emergency mechanical repairs. To execute these services, the contractor must utilize heavy-duty vehicle lifts and specialized fire-specific diagnostic tools to ensure all apparatus remain fully operational. Key requirements include the delivery of detailed service reports and the assurance that all personnel have the necessary security clearances to enter state property. The project falls under NAICS code 811112, with a response deadline set for December 1, 2026. The primary objective is to maintain the safety and reliability of critical fire apparatus through rigorous inspection and repair standards.
California Department of Corrections & Rehabilitation

POSTED

about 18 hours ago

DEADLINE

in about 2 months
View Details
NAICS: 811112
New
SLED
Heavy-Duty Mechanical and Powertrain ServicesThe Heavy-Duty Mechanical and Powertrain Services subcontract involves performing critical mechanical repairs on major vehicle systems for prime contractors supporting Washington Suburban Sanitary Commission fleet projects. The scope of work includes engine overhauls, transmission services, brake system repairs, and steering and drivetrain servicing for a range of construction equipment and light to heavy-duty trucks. The primary objective is to deliver fully operational mechanical systems to ensure fleet reliability. Managed under the Maryland General Services Department, this opportunity requires the use of ASE certified technicians to meet quality and safety standards. Interested parties must submit their responses by November 4, 2026, in accordance with the solicitation posted on October 10, 2026. The contract is categorized under NAICS code 811112.
General Services Department

POSTED

4 days ago

DEADLINE

in 22 days
View Details
NAICS: 811112
New
Federal
Fire Apparatus Maintenance and Specialized RepairThis subcontract for Fire Apparatus Maintenance and Specialized Repair supports prime contractors on Department of Veterans Affairs projects at the VAMC Minneapolis location. The scope of work involves performing preventative maintenance and emergency repairs on heavy-duty fire pumper apparatus, specifically focusing on the upkeep of pumps, hoses, and chassis. The primary objective is to ensure all equipment maintains a 1200 gpm pumping capacity and remains in full compliance with NFPA 1901 standards. The selected provider must possess NFPA 1901 compliance certification and utilize specialized heavy-duty vehicle lifts and pump testing equipment to deliver mission-ready fire apparatus. Key deliverables include the provision of detailed maintenance logs to document all services performed. This opportunity is categorized under NAICS code 811112, with a response deadline of October 18, 2026.
Department Of Veterans Affairs

POSTED

5 days ago

DEADLINE

in 5 days
View Details
NAICS: 811112
New
Encoding Altimeter Repair and Modification ServicesThis subcontract for the Department of the Navy's NAVSUP Weapon Systems Support involves the teardown, evaluation, repair, and modification of Encoding Altimeters, specifically part number 7RH 6610 01 259 0251. The selected contractor will be responsible for replacing components and modifying units according to approved manuals using SAE-AS22759 series wire to ensure all altimeters are delivered in Ready For Issue condition. The project requires strict adherence to quality and calibration standards, specifically ISO 9001 or SAE AS9100 quality systems and ANSI/NCSL Z540.3 calibration. Performance of the contract will take place in Philadelphia, with a response deadline set for November 6, 2026.
Navsup Weapon Systems Support

POSTED

6 days ago

DEADLINE

in 24 days
View Details
NAICS: 811112
SLED
ADA-Compliant Vehicle Maintenance and InspectionThis subcontract for ADA-Compliant Vehicle Maintenance and Inspection involves performing preventive maintenance and safety inspections on specialized school buses and wheelchair lifts for prime contractors working on Stockton Unified School District projects. The scope of work includes the inspection and certification of wheelchair securement systems and restraint installations utilizing specialized diagnostic tools to ensure a safety-compliant fleet. The project requires the use of certified automotive technicians who hold ADA compliance certification. The primary deliverables are certified vehicle inspection reports. Interested parties must respond by October 30, 2026, for this opportunity managed by Transportation Services in California under NAICS code 811112.
Transportation Services

POSTED

8 days ago

DEADLINE

in 17 days
View Details
NAICS: 811112
SLED
Pierce Fire Apparatus Service and MaintenanceThe Pierce Fire Apparatus Service and Maintenance subcontract involves providing specialized maintenance and repair services for prime contractors working on City of Springfield fire department projects. The scope of work focuses on technical diagnostics and repairs for Pierce fire equipment, necessitating the use of specialized tools and diagnostic software. To ensure quality and operational readiness, the contractor must employ certified Pierce technicians or possess authorized service center capabilities. This opportunity is managed by the Massachusetts Procurement agency and is centered in Springfield, Massachusetts. Interested parties must submit their responses by October 23, 2026. The contract falls under NAICS code 811112 and requires the delivery of fully operational equipment and completed maintenance services to support critical emergency response infrastructure.
PUR02 - Procurement

POSTED

8 days ago

DEADLINE

in 10 days
View Details
NAICS: 811112
SLED
Authorized Dealer Service ProviderThis subcontract for an Authorized Dealer Service Provider involves performing maintenance and warranty repairs for prime contractors associated with Marshall County Board of Supervisors vehicle procurements. The scope of work specifically includes executing warranty coverage for Cummins ISB6.7 engines and after-treatment systems, utilizing specialized diagnostic tools and providing services through either a selling dealer service facility or a mobile service unit. To qualify for this engagement, the provider must hold authorized dealer certification for the specific truck brand involved. The contract, managed under agency MPTAP in Mississippi, focuses on the delivery of professional maintenance services and the fulfillment of warranty obligations under NAICS code 811112.
MPTAP

POSTED

12 days ago

DEADLINE

in 6 days
View Details
NAICS: 811112
SLED
Refuse Vehicle Electrical & Control Systems TechnicianThis subcontract opportunity is for a Refuse Vehicle Electrical and Control Systems Technician to support prime contractors on projects for the City of Pasadena Public Works Department. The selected provider will be responsible for performing advanced electronic troubleshooting and diagnostic services on refuse collection vehicles, specifically addressing fault codes, communication errors, electrical failures, and sensor malfunctions. Key tasks include repairing wiring and hydraulic control electronic interfaces to restore full functionality. The contractor must possess advanced diagnostic scanners capable of interfacing with refuse-body control systems and is required to deliver detailed diagnostic reports. This procurement is categorized under NAICS code 811112 and is managed by the Public Works Department, BSFMD in California. Interested parties must submit their responses by the deadline of October 13, 2026.
Public Works Department, BSFMD

POSTED

14 days ago

DEADLINE

in about 8 hours
View Details
NAICS: 811112
SLED
Refuse Vehicle Hydraulic System SpecialistThis subcontract opportunity is for a Refuse Vehicle Hydraulic System Specialist to support prime contractors on City of Pasadena Public Works Department projects. The selected provider will be responsible for the inspection, diagnosis, and repair of specialized hydraulic systems on refuse collection vehicles, including the identification of leaks and contamination and the replacement of pumps, valves, cylinders, hoses, and seals. To ensure operational success, the contractor must utilize a fully equipped service vehicle featuring hydraulic diagnostic equipment and lifting tools. All repairs must be completed using new OEM or City-approved parts that contain at least 30% recycled content to deliver fully operational systems. This project falls under NAICS code 811112 and is managed by the Public Works Department, BSFMD in California. Interested parties should note the response deadline of October 13, 2026.
Public Works Department, BSFMD

POSTED

14 days ago

DEADLINE

in about 8 hours
View Details
NAICS: 811112
SLED
Bus Fleet Maintenance and ManagementThe Bus Fleet Maintenance and Management subcontract involves providing comprehensive maintenance, repair, and management services for transit fleets supporting prime contractors on International Community School transportation projects in Georgia. The scope of work includes performing routine vehicle inspections, preventative maintenance, and mechanical repairs utilizing heavy-duty diagnostic tools and professional garage facilities to ensure a road-worthy fleet. To qualify for this engagement, service providers must employ ASE certified mechanics and maintain strict compliance with DOT safety regulations. Interested parties should note that the response deadline for this opportunity is November 2, 2026.
International Community School in Decatur

POSTED

14 days ago

DEADLINE

in 20 days
View Details
NAICS: 811112
International
Heavy-Duty Diesel Mechanic (Installation Services)This subcontract for the City of Grande Prairie involves the removal of existing engines and the installation of new Cummins ISL9 280 engines and air compressor assemblies for transit bus projects. The scope of work includes engine extraction, system integration, comprehensive testing, and pre-delivery inspections utilizing diagnostic tools and heavy-duty hoists to ensure a fully operational system. The project requires a Certified Heavy-Duty Diesel Technician to execute the services. Interested parties must respond by October 20, 2026, regarding this opportunity which falls under NAICS code 811112.
City of Grande Prairie

POSTED

14 days ago

DEADLINE

in 7 days
View Details
NAICS: 811112
International
Fleet Maintenance SubcontractorThe Fleet Maintenance Subcontractor contract involves providing comprehensive mechanical repair and maintenance services for the waste collection fleet utilized by prime contractors on Buckinghamshire Council projects. The scope of work includes routine servicing, emergency repairs, and preventative maintenance specifically for refuse collection vehicles and street sweepers. To ensure operational standards, the provider must utilize heavy-duty lifts and diagnostic tools while employing certified automotive technicians who adhere to strict HSE workshop safety standards. This subcontract is managed under NAICS code 811112 and was posted on September 25, 2026. The primary objective is to deliver a fully maintained fleet that meets all necessary operational requirements for the council's waste management initiatives.
Buckinghamshire Council

POSTED

18 days ago

DEADLINE

N/A
View Details

More opportunities from California Department of Corrections & Rehabilitation

Same awarding agency

New
SLED
IFB SD26-00013
Solicitation # 0000040625

POSTED

about 15 hours ago

DEADLINE

in 15 days
View Details
NAICS: 541380
New
SLED
Specialty Arc Welding Testing (Puddle and Side Seam)This subcontract involves providing specialty arc welding testing and evaluation services for prime contractors working on California Department of Corrections and Rehabilitation facility projects in Imperial. The scope of work requires the testing of 36 welders for puddle welding on metal pan decking using SMAW 7010-1/8 per AWS D1.3 standards, as well as the testing of 36 welders for sheet-to-sheet arc side seam welds to verify fusion and inner leg engagement. The selected provider is responsible for delivering formal welder qualification record forms and certification cards upon completion of the evaluations. This opportunity falls under NAICS code 541380, with a response deadline set for November 3, 2026.
Testing Laboratories and Services

POSTED

about 17 hours ago

DEADLINE

in 21 days
View Details
NAICS: 541380
New
SLED
ASME Boiler and Pressure Vessel Pipe Welding CertificationThis subcontract involves providing guided bend testing and performance evaluations for welder qualification test pipes on California Department of Corrections and Rehabilitation facility projects in Imperial. The scope of work requires testing 24 welders in the 6G position using NR-232 self-shielded electrodes on ASTM A-36 steel, strictly adhering to the ASME Boiler and Pressure Vessel Code, Section IX, Figure QW-4614d. The selected contractor is responsible for delivering all necessary welder qualification record forms and certification cards upon completion of the evaluations. This opportunity is categorized under NAICS code 541380, with a response deadline set for November 3, 2026.
Testing Laboratories and Services

POSTED

about 17 hours ago

DEADLINE

in 21 days
View Details
NAICS: 541380
New
SLED
Structural Steel Welder Qualification and Guided Bend TestingThis subcontract involves providing guided bend testing and performance evaluation for 36 welders working on California Department of Corrections & Rehabilitation facility projects in Imperial. The scope of work requires testing welders in vertical and overhead positions using SMAW 7018-1/8 inch or FCAW NR-232 on ASTM A-36 steel, strictly adhering to the ANSI/AWS D1.100 Structural Welding Code-Steel. The selected contractor is responsible for delivering official welder qualification record forms and certification cards upon completion of the tests. This opportunity was posted on October 12, 2026, with a response deadline of November 3, 2026, falling under NAICS code 541380.
Testing Laboratories and Services

POSTED

about 17 hours ago

DEADLINE

in 21 days
View Details
NAICS: 541380
New
SLED
C5613483-D, Welding Testing and Certification Services
Solicitation # C5613483-D
Solicitation C5613483-D is an Invitation for Bid issued by the California Department of Corrections and Rehabilitation for welding testing and certification services in Imperial, California. The contractor is required to provide a Certified Welding Inspector or Certified Associate Welding Inspector to witness welds and perform guided bend testing and evaluation. Key deliverables include testing for 36 welders in vertical and overhead positions, 24 welders in the 6G position, and various other procedures including puddle, side seam, and light gauge metal stud welds. All work must adhere to ANSI/AWS D1.100, ASME Boiler and Pressure Vessel Code Section IX, and AWS D1.3 standards. The contractor is responsible for providing welder qualification record forms and certification cards, as well as the disposal of all specimens. The contract is anticipated to commence on January 1, 2027, with services performed Monday through Friday between 6:30 a.m. and 3:00 p.m. Compensation is based on a rate sheet covering all labor, travel, materials, and equipment, with payments made monthly in arrears. Award will be granted to the lowest responsible bidder, with specific incentives available for certified Disabled Veteran Business Enterprises and Small/Micro Businesses. Bidders must maintain Commercial General Liability insurance of at least 1,000,000 dollars per occurrence, along with valid automobile and workers compensation coverage. Submissions are due by November 3, 2026, and must include mandatory certifications regarding non-discrimination, drug-free workplace requirements, and California civil rights laws.
Testing Laboratories and Services

POSTED

about 17 hours ago

DEADLINE

in 21 days
View Details
NAICS: 423410
New
SLED
OEM Automotive Parts SupplierThis subcontract agreement establishes a partnership for the supply of new, Original Equipment Manufacturer grade automotive parts to support prime contractors working on California Department of Corrections and Rehabilitation facility projects. The scope of work specifically covers parts for ambulances, support vehicles, and various types of fire apparatus, including Types 1, 3, and 6. The supplier is responsible for managing all shipping and freight delivery to designated agency or prime contractor sites, ensuring that all parts are accompanied by the necessary invoices and warranty documentation. A critical requirement of the contract is the provision of a minimum 90-day warranty on all supplied components. Operating under NAICS code 423410, the contract is managed through the California Department of Corrections and Rehabilitation. Interested parties must adhere to the established timeline, with the response deadline set for December 1, 2026.
Photographic Equipment and Supplies Merchant Wholesalers

POSTED

about 18 hours ago

DEADLINE

in about 2 months
View Details
NAICS: 811111
New
SLED
Light-Duty Support and Chief Officer Vehicle ServicesThis subcontract for Light-Duty Support and Chief Officer Vehicle Services involves providing preventative maintenance and mechanical repairs for vehicles used in California Department of Corrections & Rehabilitation facility projects. The scope of work includes performing oil changes, fluid checks, and safety inspections for general support vehicles and Chief Officer platforms, specifically including Ford F150s. The contractor is responsible for utilizing standard automotive diagnostic and repair tools to ensure all vehicles are road-worthy and providing signed Service Reports upon completion. To execute this contract, all personnel must obtain the necessary security clearances for entry onto state property. The project falls under NAICS code 811111 and is managed through the California Department of Corrections & Rehabilitation. Interested parties must submit their responses by the deadline of December 1, 2026.
General Automotive Repair

POSTED

about 18 hours ago

DEADLINE

in about 2 months
View Details
New
SLED
C5613691-D - Fire House Fleet Maintenance and Repair Services
Solicitation # C5613691-D
The California Department of Corrections and Rehabilitation (CDCR) is seeking a contractor under Master Agreement C5613691-D to provide statewide maintenance, inspection, and repair services, including emergency response, for its Fire House Fleet. The scope of work covers various vehicles, including Fire Apparatus Types 1, 3, and 6, fire ambulances, chief officer vehicles, and support vehicles. Services include monthly, quarterly, semi-annual, and annual maintenance, as well as safety inspections and calibrations. Performance is required at participating CDCR locations during normal business hours, typically Monday through Friday from 7:00 a.m. to 3:00 p.m. Compensation is based on a rate sheet for labor and services, with parts reimbursed via published price lists or invoices at a markup not exceeding 10 percent. The contract award is based on the lowest net bid price, with specific incentives available for certified Disabled Veteran Business Enterprises (DVBE) and Small/Micro Business enterprises. To qualify, technicians must hold an Emergency Vehicle Technician (EVT) Level I certification from the California Office of the State Fire Marshal, and the contractor must maintain a valid DMV Motor Carrier Permit and comprehensive insurance, including Commercial General Liability of at least 1 million dollars per occurrence. All work must be documented through detailed service reports and approved by the CDCR Contract Manager prior to commencement.

POSTED

about 18 hours ago

DEADLINE

in about 2 months
View Details
NAICS: 238990
New
SLED
Rigging Equipment and Rigging LaborThis subcontract for Rigging Equipment and Rigging Labor supports prime contractors on projects for the California Department of Corrections & Rehabilitation. The scope of work involves providing essential industrial rigging gear, such as chains, shackles, and slings, alongside the professional labor required to secure loads for crane lifting. The provider is responsible for coordinating with operators to maintain load stability and ensuring all activities strictly adhere to federal, state, and local safety codes. The opportunity is categorized under NAICS code 238990 and was posted on October 12, 2026. Interested parties must submit their responses by the deadline of November 3, 2026. This contract focuses on the delivery of both specialized hardware and the technical expertise necessary to execute safe rigging operations across CDCR facility projects.
All Other Specialty Trade Contractors

POSTED

about 21 hours ago

DEADLINE

in 21 days
View Details
NAICS: 532412
New
SLED
Crane Rental with Certified OperatorsThis subcontract for the California Department of Corrections and Rehabilitation involves providing crane lifting operations for prime contractors across various facility projects. The scope of work includes the provision of certified boom operators and hydraulic boom cranes with capacities ranging from 14.5 to 120 tons. The contractor is responsible for executing lifts, managing all mobilization and demobilization efforts, and submitting required Exhibit A-1 Service Reports to document completed activities. To ensure safety and regulatory compliance, all equipment must hold DIR-accredited certification, and operators must be certified in accordance with CCR Title 8. This opportunity is categorized under NAICS code 532412, with a response deadline set for November 3, 2026. The primary objective is the successful delivery of professional lifting services to support ongoing infrastructure projects within the agency.
Construction, Mining, and Forestry Machinery and Equipment Rental and Leasing

POSTED

about 21 hours ago

DEADLINE

in 21 days
View Details
NAICS: 532412
New
SLED
C5613296-D, Rebid 1 Crane Rental and Operator Services
Solicitation # C5613296-D
Solicitation C5613296-D, Rebid 1 is a Master Agreement for the California Department of Corrections and Rehabilitation to secure crane rental and operator services across various participating locations. The contractor is responsible for providing cranes ranging from 14.5 to 120 tons, certified boom operators, and all necessary rigging equipment. Services must be delivered within 48 hours of a request, with a minimum call-out of four hours for weekday assignments. All equipment must be certified by a licensed agency accredited by the California Department of Industrial Relations in compliance with Title 8 Division 1, and operators must meet specific California Code of Regulations certification standards. The agreement is projected to run from the date of approval through September 30, 2029. Compensation is based on rates specified in the Rate Sheet, which must meet minimum prevailing wage determinations. The total basis of award for each location includes the service rates plus a 25 percent allowance for unforeseeable services, with overtime billed at 150 percent of the normal hourly rate. Bids are evaluated primarily on price, with tie-breaking determined by the highest discount offered for payments made within 30 days. To ensure operational readiness, specific distance requirements apply to certain sites, such as Calipatria State Prison and Centinela State Prison. Payment is contingent upon the submission of electronic invoices accompanied by a service report signed by a CDCR Contract Liaison.
Construction, Mining, and Forestry Machinery and Equipment Rental and Leasing

POSTED

about 21 hours ago

DEADLINE

in 21 days
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS