Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

This Sources Sought opportunity from Department Of Defense was posted on July 14, 2023. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Fire Department Annual Maintenance Service

Closed
FA520523N0006Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 811310
New
SLED
Bus Fire Suppression System Maintenance
Solicitation # WMATA-0000010906
The Washington Metropolitan Area Transit Authority is seeking proposals for the maintenance of bus fire suppression systems under solicitation number WMATA-0000010906. This procurement falls under NAICS code 811310 and is managed through the agency's Virginia operations. The solicitation was posted on October 29, 2026, and requires all responses to be submitted by the deadline of November 4, 2026. Interested parties can access further details and manage their bids through the official WMATA supplier portal.
Washington Metropolitan Area Transit Authority

POSTED

about 2 hours ago

DEADLINE

in 6 days
NAICS: 811310
New
Kubota M8200 Clutch Replacement
Solicitation # kubota-m8200-clutch-replacement
Management and Training Corporation is soliciting lump sum fee proposals for the clutch replacement of a Kubota M8200 tractor with front wheel assist, located at the Earle C. Clements Job Corps Center in Morganfield, Kentucky. The scope of work requires a qualified contractor to provide all transportation, labor, materials, and equipment to diagnose and repair the clutch assembly and power take-off system. Key technical requirements include replacing friction discs, bearings, oil seals, and O-rings, resurfacing the flywheel, and replacing hydraulic pipes and filters as needed. The contractor must perform all work according to manufacturer specifications and provide a final summary of diagnostic findings, an itemized list of replaced parts, and warranty documentation upon completion. This solicitation is set aside for small businesses, including VOSB, SDVOSB, WOSB, and HUBZone certified entities. Bids must be submitted via email to Angie Mahoney by 3:00 PM CST on November 3, 2026, and must include a bid sheet, proof of insurance, a completed supplier packet with a W-9, and applicable SBA certification letters. Award decisions will be based on best value, with a focus on administrative compliance and technical qualifications. The contract is subject to various Federal Acquisition Regulations, including standards for combating trafficking in persons, Buy American restrictions, and Service Contract Labor Standards per Wage Determination 2015-4687 Revision 31 for Kentucky.
Earle C. Clements Job Corps Center

POSTED

about 2 hours ago

DEADLINE

in 5 days
NAICS: 811310
New
SLED
ANNUAL ROTATING EQUIPMENT INSPECTION, TESTING, REPAIR, RECONDITIONING AND STORAGE SERVICES
Solicitation # 2026-RFP-130
Solicitation 2026-RFP-130, issued by the City of Lakeland, seeks qualified contractors to provide annual inspection, testing, repair, reconditioning, and storage services for critical rotating equipment at the McIntosh and Larsen Power Plants. The scope of work covers a wide range of industrial machinery, including low- and medium-voltage AC and DC electric motors, as well as circulating water and condensate pumps. Required services include clean inspect test (CIT) procedures, troubleshooting, motor rewinding, machining, welding, and dynamic field balancing. The contractor is also responsible for the pickup, transportation, and secure indoor storage of equipment, ensuring strict preservation measures such as periodic shaft rotation and moisture control to prevent corrosion and damage. The selection process is based on a points-based criteria to identify the vendor most responsive to the city's needs. Proposers must submit their responses via the OpenGov portal by October 30, 2026, and provide essential documentation including a signed W-9, Sunbiz registration, a notarized indemnification agreement, and a human trafficking affidavit. Contractors must adhere to strict safety standards, including OSHA compliance and specific certification for crane operations and critical lifts. Furthermore, vendors are required to maintain insurance policies with AM Best ratings of no less than A and must undergo a safety audit covering EMR and employee training records to ensure compliance with city risk management standards.
LE - Production - MPP

POSTED

about 5 hours ago

DEADLINE

in 8 days
NAICS: 811310
New
International
Fuel Dispenser Technical Installation & RepairThis subcontract for Fuel Dispenser Technical Installation and Repair involves the physical replacement and calibration of damaged parts within Tatsuno dispensing units for prime contractors working on Pakistan State Oil Company Ltd projects in Pakistan. The scope of work includes removing damaged components, installing new parts, testing for leaks, and utilizing specialized calibration equipment and fuel-safe tools to ensure accurate fuel measurement and fully operational units. To qualify for this engagement, providers must hold technical certification for Tatsuno equipment and adhere to ATEX/IECEx hazardous area safety standards. The opportunity was posted on October 29, 2026, with a response deadline of November 4, 2026, falling under NAICS code 811310.
Pakistan State Oil Company Ltd

POSTED

about 7 hours ago

DEADLINE

in 6 days
NAICS: 811310
New
International
RFP RF-32079-AS (Replacement of Damaged Parts of Tatsuno Dispensing Unit at NVRO, BWP Division)
Solicitation # RF-32079-AS
Solicitation RF-32079-AS is issued by the Pakistan State Oil Company Ltd for the replacement of damaged parts of a Tatsuno dispensing unit located at NVRO within the BWP Division. This procurement opportunity was posted on October 29, 2026, with a response deadline set for November 4, 2026, at 09:15. The place of performance for these services is located in Pakistan. The primary point of contact for this solicitation is Arslan Sajjad, who can be reached via email at [email hidden]. While the solicitation is hosted on the Ariba portal, specific details regarding pricing, evaluation factors, and the detailed statement of work were not provided in the available metadata.
Pakistan State Oil Company Ltd

POSTED

about 7 hours ago

DEADLINE

in 6 days
NAICS: 811310
New
SLED
Fisher Recirculation Valve and Actuator DCI and Overhaul
City of Redding

POSTED

about 8 hours ago

DEADLINE

in about 1 month
NAICS: 811310
New
SLED
WEG Industrial Motor DCI and Overhaul
City of Redding

POSTED

about 8 hours ago

DEADLINE

in about 1 month
NAICS: 811310
New
SLED
Sulzer Boiler Feedwater Pump DCI and Overhaul
City of Redding

POSTED

about 8 hours ago

DEADLINE

in about 1 month
NAICS: 811310
New
SLED
Overhaul Of Two (2) Boiler Feedwater Pumps, Motors & Valves
Solicitation # 5740
The City of Redding is soliciting proposals for the off-site shop inspection and overhaul of two Sulzer boiler feedwater pumps, two WEG motors, and two Fisher recirculation valves and their actuators. The scope of work includes the disassemble, clean, inspect, and overhaul (DCI) process, with the contractor managing all shipping, packaging, and handling of equipment to and from their facility. On-site services are limited to technical advisory supervision provided by Technical Field Advisors. A critical requirement is that the overhauled equipment must be returned to the power generation facility in Redding, California, within approximately 21 days of its initial removal and shipping. Award will be based on the best overall value, evaluated through a weighted system that prioritizes total project costs (30 points), contractor qualifications and experience (20 points), project approach and schedule conformance (20 points), understanding of project requirements (15 points), and proposal quality (5 points). The City is not required to award to the lowest cost proposer. Bidders must provide a bid security of 10%, along with payment and performance bonds of 100% and a maintenance bond of 50%. Proposals must be submitted by 3:00 p.m. PT on December 4, 2026, and must include a separate sealed envelope for the project costs and fee schedule. Because the services are off-site and professional in nature, prevailing wages under the California Labor Code are not required.
City of Redding

POSTED

about 8 hours ago

DEADLINE

in about 1 month
NAICS: 811310
New
SLED
Pump Refurbishment (Add-Alternate No. 3)This subcontract involves the refurbishment of two industrial pumps for prime contractors working on facility projects at Nassau Community College. The scope of work specifically covers one Marathon Electric and one Baldor Industrial Motor 10 HP pump, requiring a comprehensive process of inspections, the installation of replacement components, and final operational testing. The selected provider must ensure all work complies with OSHA standards and local building codes. Final deliverables include the fully refurbished pumps accompanied by detailed inspection reports and testing results. The project is categorized under NAICS code 811310, with a response deadline set for November 20, 2026.
Nassau Community College

POSTED

about 14 hours ago

DEADLINE

in 21 days
NAICS: 811310
New
WINDOW AY — 1680016170785 — N0038327QAA17
Solicitation # N0038327QAA17
Solicitation N0038327QAA17, issued by Navsup Weapon Systems Support for the Department of the Navy, seeks a contractor for the teardown, evaluation, repair, and modification of two window assemblies, identified by NSN 1680-01-617-0785. The requirement covers an induction period of one year from the date of the order, with a delivery timeframe of 90 days and shipping terms set as FOB Destination. Final inspection and acceptance will be conducted by the Contract Administration Office at the contractor's location. The government intends to make a single award based on the most advantageous offer, prioritizing past performance over price. Evaluation of past performance may include the use of the DoD Supplier Performance Risk System to assign color ratings. The contract mandates strict adherence to military packaging and marking standards, specifically MIL-STD-2073 and MIL-STD-129, with specialized labeling requirements for Depot Level Repairable items. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and compliance with various FAR and DFARS clauses, including the Buy American program and cybersecurity reporting standards.
Navsup Weapon Systems Support

POSTED

about 14 hours ago

DEADLINE

in about 1 month
NAICS: 811310
New
SLED
Annual And Periodic Inspections And Maintenance And Repair Services Of Port Authority Trans-Hudson Corporation (Path) Emergency Diesel And Natural Gas Generators -Three Year Contract
Solicitation # 2140379
The Port Authority of New York and New Jersey is soliciting bids for a three-year contract to provide annual and periodic inspections, maintenance, and repair services for emergency diesel and natural gas generators used by the Port Authority Trans-Hudson Corporation (PATH). This procurement, identified by solicitation number 6000003543 and NIGP code 28539, is focused on stationary generators. A pre-bid meeting will be conducted via Microsoft Teams on November 9, 2026, from 10:00 a.m. to 11:00 a.m. ET to review the requirements and solicitation documents. Bids must be submitted electronically through the Euna portal by the deadline of November 18, 2026. The Port Authority emphasizes a commitment to non-discrimination in accordance with Title VI of the Civil Rights Act of 1964, ensuring full and fair opportunity for all businesses regardless of race, color, national origin, age, or disability. Procurement operations are managed from 150 Greenwich Street, 21st Floor, New York, New York, and interested parties can contact the Procurement Operations Bid/RFP Custodian via email at [email hidden] or by phone at [phone hidden] for assistance.
The Port Authority of New York and New Jersey

POSTED

about 14 hours ago

DEADLINE

in 19 days

General Info

Agency

Department Of Defense → FA5205 35 Cons Pk

NAICS

811310 - Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

Place of Performance

Misawa, JP-02, 96319, JPN

Set-Aside

NONE

Documents

2

Annual Maintenance Equipment List

XLSX, High priority: read this firstsow
High

RFI for Aerial Maintenance and Equipment Testing - Misawa AFB

PDF, Low priorityrfi
Low

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseClosed
Posted

Sources Sought

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → FA5205 35 Cons Pk
Contacts2 people available
OfficeAPO, AP, 96319-5201, USA
Organization / AgencyDepartment Of Defense → FA5205 35 Cons Pk
Office AddressAPO, AP, 96319-5201, USA
Contacts
Aiyana Scott
contact@example.gov
+1 (555) 000-0000
Joshue Madilar
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
Request for Information (RFI) This RFI is for planning purposes only and shall not be considered an Invitation for Bid, Request for Quotation, or a Request for Proposal. Additionally, there is no obligation on the part of the Government to acquire any products or services described in this RFI. Your response to this RFI will be treated only as information for the Government to consider. You will not be entitled to payment for direct or indirect costs that you incur in responding to this RFI. This request does not constitute a solicitation for proposals or the authority to enter into negotiations to award a contract. Please respond to the below Questionnaire. All responses are due 1:00 p.m. JST by: JUL 21, 2023

More opportunities from Department Of Defense → FA5205 35 Cons Pk

Same awarding agency

NAICS: 336390
Federal
Presolicitation Notice _ Purchase of Fire Engine Parts, Misawa AB, Japan
Solicitation # FA520526QB136
This presolicitation notice issued by the Department of Defense under solicitation number FA520526QB136 is for the procurement of specific replacement parts for an Oshkosh Striker Fire Engine P23 located at Misawa Air Base, Japan. The requirement is anticipated to be a firm fixed price contract for various components, including a siren amplifier, light assemblies, a return spring, air hose, oil pressure switch, manifold assembly, and an elevation cylinder. All provided parts must be compatible with serial number 10TDKAK166X085717 and delivered directly to Misawa Air Base within 45 days of the award. Vendors are expected to include all shipping costs in their total quoted price. This posting serves as a notice only and does not require a response at this time.
Other Motor Vehicle Parts Manufacturing

POSTED

about 2 months ago

DEADLINE

N/A
View Details
NAICS: 561720
Federal
Award Notice - Jet/AGE Wash Service, Misawa AB, Japan
Solicitation # FA520526P0067
The contract awards Smith, Robert/Maintenance Innovative Solutions the task of performing anti-corrosion washing services for F-16s, F-35s, and associated aerospace ground equipment at Misawa Air Base, Japan. The work will be performed over a period of up to five years and six months, with the initial base year valued at a not-to-exceed amount of $209,716.07 and a total potential ceiling of $31,550,000 across the full performance period. The award was issued on July 8, 2026, by the 35th Contracting Squadron based at Misawa Air Base under solicitation number FA520526P0067, and is classified under NAICS code 561720 for environmental remediation services with no set-aside designation. The contract was posted on July 12, 2026, with primary point of contact Alexander Holliday and secondary contact Michiko Yoshizawa, both reachable through U.S. Air Force email and phone channels, and the work is to be executed at Misawa Air Base in Aomori Prefecture, Japan.
Janitorial Services

POSTED

4 months ago

DEADLINE

N/A
View Details
NAICS: 441330
Federal
Supply of Heavy Snow Vehicle Parts (Reg #18D00715)This subcontract involves the sourcing and procurement of vehicle parts for a Heavy Snow Vehicle, registration number 18D00715, supporting prime contractors on US Air Force facility projects. The contractor is responsible for managing all OCONUS logistics to ensure the delivery of components to Building 1310, Unit 5014 at Misawa Air Base in Japan. The project is managed under the Department of Defense and falls under NAICS code 441330. A critical requirement of the agreement is the capability to complete the shipment to the designated location in Misawa within 45 calendar days of the contract award.
Automotive Parts and Accessories Retailers

POSTED

6 months ago

DEADLINE

N/A
View Details
NAICS: 336390
Federal
Oral Solicitation Notice_Purchase and Delivery of 18D00715 Vehicle Parts
Solicitation # FA520526QB077
The U.S. Department of Defense, through the 35th Contracting Squadron at Misawa Air Base in Japan, is preparing to award a firm fixed price contract below the Simplified Acquisition Threshold for the purchase and delivery of vehicle parts designated as 18D00715 to support seasonal maintenance of mission-critical snow removal equipment. This pre-solicitation notice, identified by solicitation number FA520526QB077 and NAICS code 336390, is issued under RFO 12.201-1(c)(2) and serves as an informational notice only—no responses or quotes are required at this stage. The procurement is driven by the operational necessity to ensure full readiness of the snow removal fleet prior to the winter season, with all parts required to be delivered no later than 45 calendar days after contract award to meet the annual maintenance window from April through October as mandated by 35 LRSI-OP 24-2. Delivery and acceptance will occur at Building 1310, Unit 5014, Misawa Air Base, Japan, with inspection and acceptance responsibilities falling to designated government personnel, primarily TSgt Finley and MSgt Oberschlake. The contract will be executed under a firm fixed price structure, reflecting the low-risk, straightforward nature of the acquisition, and has been preceded by informal vendor quotes confirming affordability. There are no specified packaging, marking, barcoding, or MIL-STD requirements outlined, nor are there any listed evaluation factors, payment office details, accounting lines, invoicing methods, or special contract clauses such as security clearances, options, or OCI provisions. All performance obligations are tied directly to the seasonal maintenance cycle and the timely availability of parts to sustain uninterrupted airfield operations during heavy snowfall periods.
Other Motor Vehicle Parts Manufacturing

POSTED

6 months ago

DEADLINE

N/A
View Details
NAICS: 424690
Federal
Refrigerant Gas Supply and HandlingThis contract involves the supply of R-407c refrigerant gas along with copper tubing in specific sizes (1/2", 5/8", and 7/8") to support the recharge and repair of CRAC (Computer Room Air Conditioning) systems. The procurement is a subcontract under the NAICS code 424690, which pertains to chemical and allied products merchant wholesalers. The work is designated to be performed in Arboga and is managed by the Department of Defense office, specifically FA5205 35 Cons Pk. The contract focuses on ensuring the availability of essential refrigerant materials and components necessary for maintaining critical climate control infrastructure, emphasizing both supply and handling aspects. Although details such as solicitation number and point of contact are not provided, the contract was posted on March 20, 2026, and supports operations requiring specialized refrigerant products critical for system efficiency and reliability in government facilities.
Other Chemical and Allied Products Merchant Wholesalers

POSTED

7 months ago

DEADLINE

N/A
View Details
NAICS: 333618
Federal
CRAC Unit Condenser Components SupplyThis contract involves the supply of essential components for the heat rejection systems in CRAC (Computer Room Air Conditioning) units, specifically condenser fan blades, motors, and guards. These parts are critical for ensuring the proper functionality and efficiency of the cooling systems, which are vital for maintaining controlled environments in sensitive electronic and data processing facilities. The contract is classified under NAICS code 333618, which relates to the manufacturing of other engine equipment, indicating the technical and specialized nature of the goods provided. The contract is a subcontract awarded by the Department of Defense, specifically through the FA5205 35 Consolidated Pk office, with performance expected in Arboga. Posted on March 20, 2026, the contract underscores the military’s need to maintain reliable cooling infrastructure for its operational facilities. Although solicitation details and set-aside information are not provided, the contract’s focus on supplying high-quality condenser unit components highlights its role in sustaining critical climate control systems in defense environments.
Other Engine Equipment Manufacturing

POSTED

7 months ago

DEADLINE

N/A
View Details
NAICS: 334511
Federal
CRAC Unit Control Boards and Transformers SupplyThis contract involves the supply of DS control boards and 208V to 24V voltage transformers essential for system monitoring and power regulation within CRAC (Computer Room Air Conditioning) units. The subcontract is issued by the Department of Defense under the solicitation title "CRAC Unit Control Boards and Transformers Supply" and is linked to NAICS code 334511, which pertains to electronic component manufacturing. The equipment will support the reliable operation of CRAC units by ensuring precise control and voltage conversion critical to maintaining optimal conditions in sensitive environments. The place of performance for this contract is Arboga, and it is administered through the FA5205 35 Cons Pk agency. Although some specific details such as solicitation number, point of contact, and set-aside status are not provided, the contract focuses on delivering vital electronic components to enhance the monitoring and power management capabilities of CRAC systems, which are pivotal for maintaining proper temperature and environmental control in defense-related facilities.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

7 months ago

DEADLINE

N/A
View Details
NAICS: 333415
Federal
CRAC Unit Humidifier Modules SupplyThe contract involves the supply of four HU650 humidifier units designed to maintain precise environmental conditions in critical data center spaces. These humidifiers are crucial for ensuring optimal humidity levels, which help protect sensitive electronic equipment and maintain operational reliability within mission-critical environments. Issued by the Department of Defense under the office code FA5205 35 Cons Pk, the contract is categorized as a subcontract with NAICS code 333415, indicating manufacturing of HVAC equipment. The place of performance for this contract is listed as Arboga, and the contract was posted on March 20, 2026. This procurement supports vital infrastructure needs within defense-related data environments, emphasizing the importance of reliable climate control equipment.
Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

7 months ago

DEADLINE

N/A
View Details
NAICS: 332913
Federal
CRAC Unit Rotor Lock Valves SupplyThis contract involves the supply of specific rotor lock valves, model 998-0510, in sizes 1-1/4" and 1-3/4", along with gaskets, intended for compressor isolation and maintenance purposes. The procurement is managed as a subcontract under the NAICS code 332913, which relates to plumbing fixture fitting and trim manufacturing. The contracting agency is the Department of Defense, specifically the office identified as FA5205 35 Cons Pk. The performance location for the contract is in Arboga, and the contract was posted on March 20, 2026. Although certain details such as a solicitation number, agency office address, or point of contact were not specified, the contract ensures the availability of essential components needed to maintain and isolate compressors, which are crucial for operational reliability and safety in relevant systems where these valves are utilized. The contract emphasizes supplying well-defined valve models to meet precise equipment requirements.
Plumbing Fixture Fitting and Trim Manufacturing

POSTED

7 months ago

DEADLINE

N/A
View Details
NAICS: 332913
Federal
CRAC Unit Refrigerant System Components SupplyThe contract involves the supply of key components essential for maintaining the integrity of CRAC (Computer Room Air Conditioning) refrigerant systems, specifically filter dryers, liquid line solenoid valves, sight glasses, and expansion valves. These components are critical for ensuring the proper operation and reliability of the refrigerant loop in CRAC units, which are vital for cooling sensitive electronic equipment in data centers or similar environments. The subcontract is associated with the Department of Defense under the solicitation titled "CRAC Unit Refrigerant System Components Supply" and falls within the NAICS classification 332913, which covers industrial valve manufacturing. The performance location specified for the contract is Arboga, and the award is managed by the contracting office FA5205 35 Cons Pk. Although the solicitation number and set-aside status are not provided, the contract is focused on procuring these specialized refrigeration system parts to support the upkeep or installation of CRAC units ensuring operational efficiency and environmental control. The subcontract arrangement suggests it is part of a larger procurement effort within the Department of Defense’s facilities or operations.
Plumbing Fixture Fitting and Trim Manufacturing

POSTED

7 months ago

DEADLINE

N/A
View Details
NAICS: 335313
Federal
CRAC Unit Electrical Components SupplyThis contract involves the supply of two genuine Vertiv compressor contactors, model 23B0003N001, intended for use in CRAC (Computer Room Air Conditioning) units. The procurement is classified under NAICS code 335313, which relates to the manufacture of electrical equipment. The contract type is a subcontract issued by the Department of Defense through the office designated as "FA5205 35 Cons Pk." The performance of the contract is set to occur in Arboga, though specific state and zip code details are not provided. No set-aside type or organization type is specified, and the solicitation number remains unspecified. The contract was posted on March 20, 2026, indicating a forward-looking procurement timeline. The key focus is on ensuring the supplied components are authentic Vertiv parts to maintain the reliability and efficiency of CRAC units critical for maintaining environmental controls in sensitive facilities.
Switchgear and Switchboard Apparatus Manufacturing

POSTED

7 months ago

DEADLINE

N/A
View Details
NAICS: 333415
Federal
CRAC Unit Refrigeration Compressors SupplyThis contract involves the supply of two ZR190 refrigeration compressors that are specifically compatible with Liebert DS105ASJ1EI0575 CRAC (Computer Room Air Conditioning) units. The procurement is classified under NAICS code 333415, which pertains to the manufacturing of air-conditioning and warm air heating equipment and commercial and industrial refrigeration equipment. The contract is managed by the Department of Defense, specifically under the FA5205 35 Cons Pk agency, indicating its application in a military or government facility context. The compressors are intended for delivery to Arboga, suggesting the geographic location of the point of performance. Although detailed contract terms such as pricing, delivery schedule, or vendor information are not provided, the primary focus is on ensuring the supply of these critical refrigeration components to maintain the operational efficiency of the CRAC units. The contract supports the maintenance and reliability of climate control systems crucial for sensitive environments, likely data centers or similar installations requiring precise temperature management.
Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

7 months ago

DEADLINE

N/A
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

NAICS: 811310
Awarded
Federal
CONTROLLER MOTOR
Solicitation # 70z08023QAG162
Sflc Procurement Branch 1(00080)

POSTED

over 3 years ago

CLOSED

over 3 years ago
View Details
NAICS: 811310
Closed
Federal
J061--GENERATOR MAINTENANCE, INSPECTION, TESTING, AND REPAIR SERVICES - 554
Solicitation # 36C25923Q0685
Network Contract Office 19 (36C259)

POSTED

over 3 years ago

CLOSED

over 3 years ago
View Details
NAICS: 811310
Closed
Federal
Trouble Shooting a Generator/Breaker AND Testing Breaker Load Side Cables and Neutral
Solicitation # 12505B23Q0207
USDA Ars Mwa Aao Acq/per Prop

POSTED

over 3 years ago

CLOSED

over 3 years ago
View Details
NAICS: 811310
Closed
Federal
Core-Chillers Preventative Maintenance
Solicitation # 12505B23Q0198
USDA Ars Mwa Aao Acq/per Prop

POSTED

over 3 years ago

CLOSED

over 3 years ago
View Details
NAICS: 811310
Awarded
Federal
J044--Emergency Boiler Plant Gas Leak Detection Replacement Services
Solicitation # 36C26123Q0928
261-NETWORK Contract Office 21 (36C261)

POSTED

over 3 years ago

CLOSED

over 3 years ago
View Details
NAICS: 811310
Awarded
Federal
HVAC Maintenance Services at Fayetteville Arkansas VAMC
Solicitation # 36C25623Q0803
256-NETWORK Contract Office 16 (36C256)

POSTED

over 3 years ago

CLOSED

over 3 years ago
View Details
NAICS: 811310
Awarded
Federal
765 CMOP- Robot Arm Preventative Maintenance
Solicitation # 36C770-23-Q-0361
National Cmop Office (36C770)

POSTED

over 3 years ago

CLOSED

over 3 years ago
View Details
NAICS: 811310
Closed
Federal
Pharmacy A/V System-PMA
Solicitation # FA481423TF087
FA4814 6 Cons Pk

POSTED

over 3 years ago

CLOSED

over 3 years ago
View Details
NAICS: 811310
Awarded
Federal
66--VALVE,SEA,UNDERWATE, IN REPAIR/MODIFICATION OF
Solicitation # N0010423QUC73
Navsup Weapon Systems Support Mech

POSTED

over 3 years ago

CLOSED

over 3 years ago
View Details
NAICS: 811310
Awarded
Federal
48--VALVE,LINEAR,DIRECT, IN REPAIR/MODIFICATION OF
Solicitation # N0010423QFD89
Navsup Weapon Systems Support Mech

POSTED

over 3 years ago

CLOSED

over 3 years ago
View Details
NAICS: 811310
Awarded
Federal
J012--Fire Pump Replacement
Solicitation # 36C24223Q0585
242-NETWORK Contract Office 02 (36C242)

POSTED

over 3 years ago

CLOSED

over 3 years ago
View Details
NAICS: 811310
Closed
Federal
GENERATOR MAINTENANCE
Solicitation # NFFR75002302184S1C
Department Of Commerce Noaa

POSTED

over 3 years ago

CLOSED

over 3 years ago
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS