Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

First Article and Production Lot Testing Services

Open

Federal

Response Deadline11/16/2026, 12:00:00 PM EST

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for First Article and Production Lot Testing Services supports the Department of Defense through the DLA Weapons Support Fluid Handling Division. The selected provider will perform independent quality assurance and technical testing for prime contractors to ensure DLA supply contracts meet all required standards. Primary responsibilities include conducting First Article Tests to verify technical specifications and Production Lot Tests to maintain production consistency, with a specific focus on utilizing leak detection and pressure testing systems to validate self-sealing capabilities. The contractor is required to deliver certified test reports and certifications of compliance to verify all technical requirements are met. Performance for this contract will take place in Jacksonville, Florida, under NAICS code 541380. Interested parties must respond by November 16, 2026.

General Info

Testing services for DoD fluid handling in Jacksonville, Florida, due November 16, 2026.

Agency

Department Of Defense → DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

NAICS

541380 - Testing Laboratories and Services

Place of Performance

JACKSONVILLE, FL, 32212-0103, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7M3-27-T-1030.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

COUPLING HALF, SELF-SEA

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 5

subcontract

Response DeadlineNov 16

Submission deadline

Response Deadline

11/16/2026, 12:00:00 PM ESTin 10 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs independent quality assurance and technical testing for prime contractors delivering DLA supply contracts. Conducts First Article Tests (FAT) to verify technical specifications and Production Lot Tests (PLT) to ensure production consistency. Utilizes pressure testing and leak detection systems to verify self-sealing capabilities. Delivers certified test reports and certifications of compliance.

Similar Contracts

Same NAICS industry code

RFQ#9783 Respirable Crystalline Silica Exposure Assessment

Solicitation # RFQ#9783

Management & Training Corporation (MTC) is soliciting bids under RFQ#9783 for a subcontracting opportunity to conduct a Respirable Crystalline Silica Exposure Assessment at the Edison Job Corps Center in Edison, New Jersey. The project requires a qualified industrial hygiene consultant to evaluate the Brick Trade training program, specifically focusing on 27 potentially exposed students and instructors involved in activities such as fire clay mixing and brick cutting. The scope of work includes performing site assessments, implementing a personal breathing-zone air sampling plan, and comparing results against OSHA permissible exposure limits and action levels. Deliverables consist of a written report, laboratory results, exposure calculations, and a prioritized corrective action plan for reducing exposures. This is a fee-for-service contract awarded on a best-value basis. Interested offerors must submit a lump sum bid, a completed supplier packet including Form W-9 and self-certification, proof of insurance, and three professional references by November 6, 2026. The solicitation is open to various small business set-asides, including VOSB, SDVOSB, WOSB, and HUBZone. Awardees must comply with Service Contract Labor Standards for Middlesex County, New Jersey, and adhere to strict federal guidelines regarding the protection of sensitive information and the Buy American Act. First-tier subcontractors with contracts exceeding 45,000 dollars must also provide disclosures regarding government debarment or suspension.

Edison Job Corps

POSTED

about 8 hours ago

DEADLINE

in about 13 hours

Emergency Final Cost Air Qual Test Z0320 Rochelle

Solicitation # B-54783

Solicitation B-54783 is an emergency procurement issued by the State of Illinois under the Property Management agency, specifically the BOPM41640 office. The contract is titled Emergency Final Cost Air Qual Test Z0320 Rochelle, indicating a requirement for air quality testing services located in Rochelle, Illinois. The solicitation was posted on November 5, 2026, with a response deadline set for November 24, 2026. The procurement process is managed by Scott Eldridge and Gina Jacaway, who serve as the Purchaser and State Purchasing Officer, respectively. While the solicitation is active, specific details regarding the statement of work, pricing, evaluation factors, and contract clauses are not currently detailed in the provided documentation. Interested parties can access further information through the Illinois BidBuy portal.

BOPM41640 - Property Management

POSTED

about 9 hours ago

DEADLINE

Geotechnical Laboratory TestingThis subcontract for Geotechnical Laboratory Testing involves providing specialized analysis of soil and rock samples for prime contractors working on University of Connecticut facility projects. The scope of work focuses on evaluating physical and mechanical properties, specifically shear strength, plasticity, and consolidation, ensuring all procedures adhere to ASTM International standards. The selected provider will be responsible for delivering comprehensive laboratory test results and detailed data sheets. Managed by DAS Procurement for the state of Connecticut, this opportunity falls under NAICS code 541380. The solicitation was posted on November 5, 2026, with a response deadline set for December 8, 2026. Interested parties can find further information through the CTSource Bid Board.

DAS Procurement

POSTED

about 10 hours ago

DEADLINE

in about 1 month

Construction Inspection and Quality AssuranceThis subcontract for Construction Inspection and Quality Assurance involves providing site inspection and material testing services for prime contractors working on South Dakota Department of Game, Fish and Parks projects. The primary focus is conducting quality assurance for soil, steel, and concrete during the construction of a fish barrier. To ensure technical accuracy and safety, the contract requires that all work be performed by certified construction inspectors under the oversight of a Professional Engineer. The selected provider is responsible for delivering detailed inspection reports and formal certifications confirming that the construction complies with all design plans. This opportunity is issued by the South Dakota State Government under NAICS code 541380. Interested parties must submit their responses by the deadline of December 17, 2026.

South Dakota State Government

POSTED

about 11 hours ago

DEADLINE

in about 1 month

Geotechnical and Subsurface Investigation ServicesThis subcontract for Geotechnical and Subsurface Investigation Services supports the Telfair Wheeler Airport Authority in Georgia. The scope of work involves performing subsurface explorations and detailed soil analysis to assist prime contractors with critical infrastructure projects, specifically focusing on runway rehabilitation and the construction of new hangars. The selected provider will be responsible for conducting soil borings and delivering comprehensive geotechnical engineering reports. These deliverables must include professional soil stability recommendations to ensure the structural integrity of the airport improvements. The solicitation was posted on November 5, 2026, with a response deadline of December 7, 2026, falling under NAICS code 541380.

Telfair Wheeler Airport Authority

POSTED

about 13 hours ago

DEADLINE

in about 1 month

Accredited Environmental Testing LaboratoryThis subcontract opportunity, managed by DAS Procurement for the State of Connecticut, seeks an accredited environmental testing laboratory to provide analytical services for prime contractors working on Colchester Housing Authority residential projects. The selected provider will be responsible for performing laboratory analysis on samples for mold, lead, radon, asbestos, and PCBs, ensuring all results are delivered as certified reports. To qualify, the laboratory must maintain specific accreditations required by federal guidelines and the State of Connecticut for chemical and biological analysis. Interested parties should note the response deadline of November 19, 2026, and refer to NAICS code 541380 for the scope of work.

DAS Procurement

POSTED

about 14 hours ago

DEADLINE

Third-Party Source Inspection and Quality CertificationThis subcontract for Third-Party Source Inspection and Quality Certification supports prime contractors on DLA Weapons Support ASC projects. The selected provider will perform source inspections and quality verification at manufacturer facilities, utilizing precision measurement tools to ensure strict compliance with MS35764H and MIL-DTL-45912C standards. Additionally, the contractor is responsible for validating SAE AS9003/ISO 9001 systems and ensuring packaging meets MIL-STD-2073-1E, MIL-STD-129, and MIL-STD-130N requirements, culminating in the delivery of signed inspection reports and quality certifications. Managed by the Department of Defense under NAICS code 541380, the performance of this contract is centered in Tracy, California. The solicitation was posted on November 5, 2026, with a response deadline of November 13, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 14 hours ago

DEADLINE

First Article Testing (FAT) and Quality ValidationThis subcontract for the DLA Weapons Support Active Devices Division involves performing First Article Testing and quality validation for prime contractors. The scope of work requires validating manufactured units against TDP Rev A Gen 1 and verifying zero-based sampling results in accordance with MIL-STD-1916 or ASQ H1331. To ensure full compliance with QAP 16236, the provider must utilize precision metrology and electrical testing equipment, ultimately delivering a certified First Article Test Report. The project is categorized under NAICS code 541380 and will be performed in New Cumberland. Interested parties should note the response deadline of November 16, 2026, for this Department of Defense requirement.

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 14 hours ago

DEADLINE

First Article Testing and Validation ServicesThis subcontract for First Article Testing and Validation Services supports the Department of Defense through the DLA Weapons Support LSO Combat Vehicles and Armament. The project involves performing and documenting First Article Testing for prime contractors on aircraft component projects, specifically focusing on the validation of duct assemblies. The selected provider will use precision testing equipment to verify that the first production unit meets all technical drawings and government specifications, ensuring overall manufacturing process capability. The contract is designated as a Total Small Business Set-Aside under NAICS code 541380, with performance taking place in New Cumberland. The primary deliverables include a certified First Article Test report and the validated first production unit. Interested parties must respond by November 16, 2026.

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 14 hours ago

DEADLINE

First Article Test (FAT) Validation ServicesThis subcontract for First Article Test Validation Services supports prime contractors delivering for the DLA Weapons Support Land Supply Chain. The selected provider is responsible for producing and delivering three FAT units of lot/item 3040/7196982 to Tinker AFB within a 120-day timeframe. The scope of work involves verifying material integrity and dimensional accuracy against the technical data package using CMM inspection equipment and metrology. The final deliverables include the three FAT units and a comprehensive validation report. To qualify for this effort, the contractor must meet strict cybersecurity standards, specifically CMMC Level 2 and NIST SP 800-171 compliance. Performance will take place at Hill AFB under NAICS code 541380.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 14 hours ago

DEADLINE

Precision Component Inspection ServicesThe Precision Component Inspection Services subcontract involves providing destination-level quality assurance for prime contractors supporting the DLA Weapons Support Fluid Handling Division. Based at Tinker AFB, the selected provider will be responsible for conducting blow-through air tests to clear internal passages of obstructions and performing rigorous visual inspections of all internal and external passages using high-magnification tools. The primary objective is to verify that all components comply with the technical and quality requirements specified in the DLA Master List. To complete the scope of work, the contractor must deliver a formal inspection report and certification for the processed items. This requirement falls under NAICS code 541380 and is managed by the Department of Defense.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 14 hours ago

DEADLINE

Dimensional Inspection and Certification ServicesThis subcontract for Dimensional Inspection and Certification Services supports prime contractors delivering DLA supply contracts through the Department of Defense. The scope of work involves performing dimensional conformance testing on 3,729 units, specifically inspecting Class 3A and 3B threads according to FED-STD-H28/20 and verifying identification markings per MIL-STD-130N. All work must be performed using precision gauging and thread measurement tools calibrated to federal standards. The service provider is required to maintain a quality management system certified under ISO 9001 or SAE AS9003. Key deliverables include detailed inspection reports and certifications of conformance. Performance will take place at Hill AFB, and the solicitation is categorized under NAICS code 541380.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 14 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

Same awarding agency

Aerospace Surface Treatment and CoatingThis subcontract for Aerospace Surface Treatment and Coating involves providing specialized surface treatments and coatings for Pump Cover P/N DS-922542. Working under the DLA Weapons Support Fluid Handling Division of the Department of Defense, the contractor is responsible for applying protective coatings, plating, or finishes that adhere to the DLA Master List of Technical and Quality Requirements. The work requires the use of industrial plating or anodizing equipment to ensure all components meet strict corrosion and wear specifications before final delivery. The project is categorized under NAICS code 332813 and will be performed at Hill AFB. Interested parties should note the response deadline of November 16, 2026, following the posting date of November 5, 2026.

Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

about 14 hours ago

DEADLINE

Supply of Certified Aerospace Raw MaterialsThis subcontract involves the supply of certified aerospace raw materials, including raw billets, castings, or forgings, to prime contractors supporting the DLA Weapons Support Fluid Handling Division. The materials are specifically required for the manufacture of Pump Cover P/N DS-922542 and must strictly adhere to established aerospace specifications. The selected provider is responsible for delivering essential documentation with the materials, including Material Test Reports, Certificates of Conformance, and Safety Data Sheets in compliance with 29 CFR 1910.1200(g). Performance for this contract is centered at Hill AFB, with a response deadline set for November 16, 2026.

Iron and Steel Pipe and Tube Manufacturing from Purchased Steel

POSTED

about 14 hours ago

DEADLINE

Precision Machining and Assembly of Pump CoversThis subcontract involves the precision machining and assembly of five Pump Cover Assemblies, specifically part number DS-922542 under NSN 1650-00-790-9720, for the Department of Defense DLA Weapons Support Fluid Handling Division. The work must be performed at Hill AFB and requires strict adherence to the DLA Master List of Technical and Quality Requirements, utilizing CNC machining and specialized inspection equipment for Critical Application Items. Quality assurance is a primary requirement, with mandatory sampling conducted according to MIL-STD-1916 or ASQ H1331 standards. The project falls under NAICS code 336413, with a response deadline set for November 16, 2026.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 14 hours ago

DEADLINE

O-Ring Supply (NSN 5331-01-013-9653)This subcontract involves the manufacture and supply of 138 asbestos-free O-rings for prime contractors supporting the DLA Weapons Support Fluid Handling Division. The items must be produced according to NSN 5331-01-013-9653 specifications and delivered FOB Origin to Tracy, California. The contractor is required to adhere to strict quality assurance and packaging standards, including MIL-STD-1916 or ASQ H1331 for quality, and MIL-STD-2073-1E and MIL-STD-129 for marking. All items must be sealed in MIL-DTL-117 waterproof, greaseproof, and opaque bags. Additionally, the supplier must maintain full compliance with the Buy American Act and the Berry Amendment.

All Other Plastics Product Manufacturing

POSTED

about 14 hours ago

DEADLINE

Precision Casting and Forging for Fuel Pump ComponentsThis subcontract involves the precision casting and forging of raw structural components for fuel pump parts, specifically identified by NSN 2910003557669, to support prime contractors under DLA supply contracts. The selected provider will utilize industrial casting furnaces or forging presses to produce high-grade alloy blanks according to strict technical specifications, which are then delivered to the prime manufacturer for final machining. Managed by the Department of Defense under the DLA Weapons Support Fluid Handling Division, the project is categorized under NAICS code 332997 and requires full compliance with Buy American regulations. Performance will take place in Albany, and the solicitation period runs from November 5, 2026, through November 16, 2026.

Industrial Pattern Manufacturing

POSTED

about 14 hours ago

DEADLINE

Engine Fuel Pump Kit Fabrication and SupplyThis subcontract, managed by the Department of Defense under the DLA Weapons Support Fluid Handling Division, involves the fabrication and supply of 18 complete parts kits for engine fuel pumps, identified by NSN 2910003557669. The scope of work requires precision fabrication of components and kit assembly utilizing specialized tooling, casting, and forging processes to support prime contractors on DLA supply contracts. The contractor must ensure strict adherence to MIL-STD-2073-1 Appendix D and MIL-STD-129 for all packaging and marking requirements. Additionally, a CMMC Level 2 self-assessment is mandatory for compliance. Performance of the contract will take place in Albany, Georgia, under NAICS code 333611.

Turbine and Turbine Generator Set Units Manufacturing

POSTED

about 14 hours ago

DEADLINE

Cadmium Plating Services for Steel FittingsThis subcontract involves providing specialized cadmium plating services for the DLA Weapons Support Fluid Handling Division. The scope of work requires the surface preparation and application of cadmium plating on 128 steel street elbows to ensure they meet strict corrosion resistance specifications. All work must be performed in compliance with hazardous materials labeling standards per 29 CFR 1910.1200 and requires the necessary environmental permits for cadmium processing. The project is categorized under NAICS code 332813 and will be performed in New Cumberland. Interested parties must respond by November 16, 2026, to provide the finished cadmium-plated steel elbows as required by the Department of Defense.

Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

about 14 hours ago

DEADLINE

Manufacturer of Steel Street Elbows (NSN 4730-01-059-4126)This subcontract involves the manufacture and delivery of 128 steel street elbows for the Department of Defense, specifically supporting the DLA Weapons Support Fluid Handling Division. The required components must feature a 90-degree flow angle, a 1-1/4 inch nominal pipe size, and female NPTF to male NPTF threads capable of withstanding a 3000 PSI pressure rating. The use of additive manufacturing is strictly prohibited for the production of these fittings. To be eligible, the provider must maintain US/Canada Joint Certification Program certification and ensure full compliance with ITAR and EAR regulations. The project is categorized under NAICS code 332710, with performance taking place in New Cumberland. Interested parties must respond by November 16, 2026.

POSTED

about 14 hours ago

DEADLINE

MIL-SPEC Packaging and Palletization ServicesThis subcontract involves providing specialized military-grade packaging, marking, and palletization services for the Department of Defense, specifically under the DLA Weapons Support Fluid Handling Division. The scope of work requires the processing of 1,863 tube caps to be delivered via FOB Origin shipment. All activities must strictly adhere to military standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization, utilizing specific unit and intermediate container configurations. The project is categorized under NAICS code 333613 and will be performed in New Cumberland, Pennsylvania. Interested parties should note the response deadline of November 16, 2026, for this specialized logistics requirement supporting prime contractors on DLA projects.

Mechanical Power Transmission Equipment Manufacturing

POSTED

about 14 hours ago

DEADLINE

Manufacturer of Steel Tube Caps (NSN 4730013592430)This subcontract involves the manufacture and delivery of 1,863 steel tube caps for the Department of Defense, specifically supporting the DLA Weapons Support Fluid Handling Division. The contractor is responsible for fabricating the components using precision machining or forming equipment to ensure full compliance with technical standards SAE J1453-3 and SAE J1453-1-2012. The agreement mandates strict adherence to the Buy American Act and prohibits the use of Class I ozone depleting chemicals during production. Performance of the contract will take place in New Cumberland, Pennsylvania, under NAICS code 332710.

POSTED

about 14 hours ago

DEADLINE

Supply of Butt Hinges (NSN 5340-00-664-8138)This subcontract involves the manufacture and supply of 37 specialized butt hinges, identified by part number MS20001P12-7200 and NSN 5340-00-664-8138, for prime contractors supporting the DLA Weapons Support Fluid Handling Division. The items must be produced in strict accordance with Basic Specification MS20001P, Revision P, and Technical Data Package Rev A Gen 1, with packaging and compliance for critical application items meeting MIL-STD-129 standards. The contract falls under NAICS code 332510 and is associated with the Department of Defense. Performance for this requirement is located in Cherry Point, with a response deadline set for November 16, 2026.

Hardware Manufacturing

POSTED

about 14 hours ago

DEADLINE

Specialized Packaging and Palletization ServicesThis subcontract for Specialized Packaging and Palletization Services supports prime contractors on DLA supply contracts under the Department of Defense, specifically the DLA Weapons Support Fluid Handling Division. The scope of work involves the packaging, labeling, and palletization of materials, including the handling of hazardous and radioactive materials using specialized industrial containment equipment. All deliverables must be ready for transport and strictly adhere to RP001 DLA Packaging Requirements, MIL-STD 129 labeling standards, and ASTM D3951 packaging specifications. The performance of these services will take place in New Cumberland, Pennsylvania, under NAICS code 493110. The opportunity was posted on November 5, 2026, with a response deadline of November 16, 2026.

General Warehousing and Storage

POSTED

about 14 hours ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Third-Party Quality Inspection and Sampling

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 14 hours ago

DEADLINE

First Article Testing (FAT) for Electron Tubes

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 14 hours ago

DEADLINE

First Article Testing and Validation Services

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 14 hours ago

DEADLINE

Critical Application Quality Inspection

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 14 hours ago

DEADLINE

First Article Testing and Quality Conformance

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 14 hours ago

DEADLINE

Aerospace Quality Assurance and Dimensional Inspection

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 14 hours ago

DEADLINE

First Article Testing and Quality Certification

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 14 hours ago

DEADLINE

Third-Party Source Inspection and Quality Certification

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 14 hours ago

DEADLINE

Production Lot Testing and Quality Validation

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 14 hours ago

DEADLINE

Contractor First Article Testing (FAT)

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 14 hours ago

DEADLINE

Zero-Based Sampling Inspection Services

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 14 hours ago

DEADLINE

First Article Testing (FAT) Services

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 14 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS