Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

First Article Test (FAT) & Validation Laboratory

Active

Federal

Response Deadline11/05/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves providing First Article Testing and technical validation services for prime contractors supporting the Department of Defense, specifically the DLA Weapons Support ASC Supplier Oper OEM Division. The scope of work requires conducting testing on three probes and generating detailed test reports in strict accordance with MIL-HDBK 831, with a particular focus on monitoring sensor resistance. To achieve this, the contractor must utilize high-precision resistance measurement instrumentation and environmental testing chambers. The primary deliverables for this engagement are the final FAT Report and the validated test samples. Performance will take place at Robins Air Force Base, and the project falls under NAICS code 541380. Interested parties should note the response deadline of November 5, 2026.

General Info

First Article Testing and validation for DoD probes at Robins Air Force Base.

Agency

Department Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

NAICS

541380 - Testing Laboratories and Services

Place of Performance

ROBINS A F B, GA, 31098-1887, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A5-27-T-2035.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

PROBE, HUMIDITY-TEMPERA

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 28

subcontract

Response DeadlineNov 5

Submission deadline

Response Deadline

11/05/2026, 05:00:00 PM UTCin 8 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs First Article Testing (FAT) and technical validation for prime contractors on DLA Weapons Support ASC projects. Conducts testing on three probes and generates test reports in accordance with MIL-HDBK 831, including specific monitoring of sensor resistance. Utilizes environmental testing chambers and high-precision resistance measurement instrumentation. Delivers FAT Report and validated test samples.

Similar Contracts

Same NAICS industry code

NDT Inspection for Cam AssemblyThis subcontract involves providing Non-Destructive Testing services for prime contractors supporting DLA Weapons Support ASC aerospace projects. The scope of work focuses on conducting structural integrity inspections of forged and machined cam assemblies utilizing ultrasonic, radiographic, or penetrant methods. All work must be performed in accordance with RQ040 NDT Accreditation Requirements, and the contractor is responsible for delivering certified inspection reports. The project is managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div, with performance taking place at Tinker AFB. Interested parties should note the response deadline of November 5, 2026, and the classification of the work under NAICS code 541380.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 6 hours ago

DEADLINE

Third-Party Inspection and CertificationThis subcontract for Third-Party Inspection and Certification supports the Department of Defense at the Jacksonville Building. The selected provider will perform final inspections and quality validation for prime contractors delivering aviation lighting for the DLA. Responsibilities include conducting functional testing and dimensional inspections using CMM and electrical test equipment to ensure compliance with TDP Rev A Gen 1, culminating in the delivery of certificates of conformance and detailed inspection reports. Critical requirements for this engagement include maintaining CMMC Level 2 certification and coordinating directly with the DCMA for source inspections. The project falls under NAICS code 541380 and is based in Jacksonville, Florida. Interested parties must respond by November 9, 2026.

JACKSONVILLE BLDG

POSTED

about 6 hours ago

DEADLINE

Specialized Testing Laboratory (First Article Test)This subcontract opportunity is for a Specialized Testing Laboratory to perform First Article Testing for prime contractors supporting DLA Weapons Support Land Supplier Operations. The selected provider will be responsible for testing two units using specialized shock and impact testing rigs to verify that performance metrics align with the provided technical data package. The final deliverable for this engagement is a certified FAT Test Report. The project is managed under NAICS code 541380 and will be performed in New Cumberland. Due to the nature of the work, the contractor must have access to ITAR and EAR export-controlled data, and ISO/IEC 17025 certification is preferred. Interested parties must respond by November 9, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 6 hours ago

DEADLINE

First Article Test (FAT) Laboratory ServicesThis subcontract for First Article Test Laboratory Services supports the DLA Weapons Support Nuclear Reactor Program. The selected provider will perform First Article Testing on a single unit of electrical insulation to ensure full compliance with MIL-I-24768/1(1) standards. This process involves utilizing specialized thermal resistance and dielectric testing equipment to validate the component, culminating in the delivery of one validated test unit and a certified First Article Test report. Eligible contractors must hold ISO 9001:2015 or ISO/IEC 17025 certification to qualify for the work. The performance of these services is located at Hill AFB. Interested parties should note the response deadline of November 9, 2026, for this Department of Defense requirement categorized under NAICS code 541380.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 6 hours ago

DEADLINE

Material Testing and Certification LaboratoryThis subcontract for the DLA Weapons Support Land Supply Chain involves providing Material Testing and Certification Laboratory services to perform Production Lot Testing for prime contractors. The primary objective is to validate the quality conformance of O-rings by reviewing material certifications, process operation sheets, and inspection method sheets. Specific technical requirements include verifying asbestos-free composition and ensuring surface imperfections adhere to ISO 3601-3 standards, culminating in the delivery of a comprehensive Test Report. The project is based in Keyport, Washington, and falls under NAICS code 541380. Due to the nature of the technical data handled during the certification process, the contractor must maintain CMMC Level 2 compliance. Interested parties should note the response deadline of November 9, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 6 hours ago

DEADLINE

First Article Testing (FAT) ServicesThis subcontract for First Article Testing services is issued by the Department of Defense through the DDSP New Cumberland Facility. The selected contractor will perform quality conformance inspection and testing for prime contractors delivering DLA supply contracts, specifically focusing on one prototype unit. Using laboratory equipment, the contractor must verify material specifications, durability, and pressure in strict accordance with MIL-H-24580. The scope of work requires the delivery of a comprehensive test report and one validated First Article unit, with all test results provided to the Engineering Support Activity. This opportunity is designated as a Total Small Business Set-Aside under NAICS code 541380. Performance will take place in New Cumberland, Pennsylvania, with responses due by November 9, 2026.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 6 hours ago

DEADLINE

First Article Testing and Inspection ServicesThis subcontract for First Article Testing and Inspection Services involves providing specialized validation for prime contractors supporting Defense Logistics Agency supply contracts. The selected provider will use high-precision metrology equipment, such as optical comparators or CMM, to verify that the dimensions and tolerances of a first-article sample for NSN 5305-01-470-6044 align with required technical data. To qualify, the contractor must maintain an inspection system compliant with ISO 9001 or SAE AS9003 standards. The final deliverables for this engagement include the tested first article unit and a completed FAT certification report. The solicitation was posted on October 28, 2026, with a response deadline of November 5, 2026, under NAICS code 541380.

Defense Logistics Agency

POSTED

about 6 hours ago

DEADLINE

Electrical Testing and Certification LaboratoryThis subcontract opportunity is for an Electrical Testing and Certification Laboratory to provide independent verification and testing of cable assemblies for prime contractors supporting DLA Weapons Support ASC projects. The scope of work involves conducting Product Verification Testing, which includes electrical continuity, voltage withstand, and physical dimension checks. All sampling and inspections must be performed using calibrated measurement tools in accordance with MIL-STD-1916 or ASQ H1331 standards, culminating in the delivery of formal test reports and certifications of compliance. Managed by the Department of Defense under the DLA Weapons Support ASC Commodities Division, this requirement is designated as a Total Small Business Set-Aside under NAICS code 541380. The solicitation was posted on October 28, 2026, with a response deadline of November 12, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 6 hours ago

DEADLINE

Non-Destructive Testing (NDT) ServicesThis subcontract for Non-Destructive Testing services supports prime contractors on DLA Weapons Support ASC aerospace projects located at Hill AFB. The scope of work involves performing X-ray, ultrasonic, dye penetrant, or magnetic particle inspections on Air Director Ducts in strict accordance with the provided technical data package. The selected provider is responsible for delivering comprehensive NDT inspection reports and formal certification of part integrity. To qualify for this engagement, the contractor must possess RQ040 NDT Accreditation and have access to the necessary NDT-specific equipment. This opportunity falls under NAICS code 541380 and is managed by the Department of Defense. Interested parties must submit their responses by November 5, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 6 hours ago

DEADLINE

Third-Party Quality Conformance InspectionThis subcontract for the DLA Weapons Support Nuclear Reactor Program involves providing third-party quality conformance and critical source inspections for prime contractors. The selected provider will conduct inspections at the point of origin, utilizing precision measurement tools and sampling plans in accordance with MIL-STD-1916 or ASQ H1331 to ensure all technical requirements of the DLA Master List RA001 are met. Key deliverables include the submission of detailed inspection reports and formal quality certification documents. The project is managed by the Department of Defense under NAICS code 541380, with the place of performance located in Jacksonville, Florida. Interested parties must respond by November 9, 2026, regarding this requirement for specialized quality assurance services.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 6 hours ago

DEADLINE

Materials Testing Laboratory (First Article Test)This subcontract involves providing First Article Testing services for the Department of Defense DLA Weapons Support Fluid Handling Division. The selected laboratory will perform testing on three units of nonmetallic tubing to ensure full compliance with MIL-PRF-6855F and MIL-PRF-6855/5A standards. Using certified equipment, the contractor must verify the materials' resistance to chemical exposure as well as their performance under specific pressure and temperature conditions. The project is categorized under NAICS code 541380 and will be performed in New Cumberland. A critical requirement of the agreement is the delivery of a formal FAT test report, which must be submitted within 60 calendar days of the contract date. Interested parties should note the response deadline of November 9, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 6 hours ago

DEADLINE

Production Lot Testing and Quality ReportingThis subcontract for Production Lot Testing and Quality Reporting supports the DLA Weapons Support Fluid Handling Division. The selected provider will perform specialized production lot testing and inspections for prime contractors, utilizing pressure testing and leak detection systems. All work must adhere to zero-based sampling plans, specifically MIL-STD-1916, and culminate in the delivery of certified test results and detailed Production Lot Test reports. The project is based in San Diego, California, and falls under NAICS code 541380. Due to the nature of the sensitive data involved, the contractor is required to maintain CMMC Level 2 certification. Interested parties must submit their responses by November 9, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 6 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

Same awarding agency

Supplier of Special Bands (P/N 3023697)This subcontract involves the sourcing and delivery of four specialized aircraft bands, specifically part number 3023697 from Pratt & Whitney Canada Corp, under NSN 2840010295271. The supplier is responsible for providing these units to prime contractors supporting procurement projects for the Department of Defense, specifically the DLA Weapons Support ASC Supplier OEM Division. All deliverables must strictly adhere to the DLA Master List of Technical and Quality Requirements and be packaged according to RP001 DLA Packaging Requirements for Procurement. The opportunity is categorized under NAICS code 423840, with a response deadline set for November 5, 2026.

Industrial Supplies Merchant Wholesalers

POSTED

about 6 hours ago

DEADLINE

Supply of Round Plain Nuts (NSN 5310-00-839-1524)This subcontract, issued by the Department of Defense under the DLA Weapons Support ASC Supplier OEM Division, requires the supply of 84 round plain nuts identified by NSN 5310008391524. The hardware must strictly adhere to the DLA Master List of Technical and Quality Requirements and be delivered via FOB Origin to Cherry Point by April 3, 2028. To be eligible, contractors must provide a valid CAGE code and UEI, and they must certify that no covered defense telecommunications equipment is used in accordance with FAR 52.204-24. The opportunity falls under NAICS code 332722, with a response deadline of November 5, 2026.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 6 hours ago

DEADLINE

Fabrication and Supply of Pump Housing Stand (P/N HS9612)This subcontract involves the fabrication and supply of one Pump Housing Stand, part number HS9612, manufactured to Hamilton Sundstrand specifications. The project supports prime contractors fulfilling DLA supply contracts for NOAA and is managed by the Department of Defense under the DLA Weapons Support ASC Supplier OEM Division. Performance of the work will take place in Lakeland, Florida. The contractor must adhere to strict quality assurance standards per MIL-STD-1916 or ASQ H1331 and follow MIL-STD-2073-1E and MIL-STD-129 for packaging. Additionally, the agreement mandates full compliance with the Buy American Act and DFARS 252.204-7012 cybersecurity requirements. The final deliverable is one completed and inspected stand.

All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 6 hours ago

DEADLINE

Supplier of Certified Raw Materials for Critical DiaphragmsThis subcontract involves the supply of certified raw materials for prime contractors supporting DLA Weapons Support ASC projects. The scope of work requires the provision of aerospace-grade alloys or elastomers that strictly adhere to the technical data requirements of NSN 1660009428088. To maintain full traceability for Navy Critical Safety Items, the supplier must provide comprehensive Mill Test Reports and Certificates of Conformance. The contract is managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper OEM Division, with the place of performance located in Cherry Point. Interested parties must respond by November 5, 2026, regarding this requirement categorized under NAICS code 326199.

All Other Plastics Product Manufacturing

POSTED

about 6 hours ago

DEADLINE

Manufacturer of Critical Safety Regulator DiaphragmsThis subcontract involves the manufacture of ten regulator diaphragms for prime contractors supporting DLA Weapons Support ASC projects. The components must be fabricated according to NSN 1660009428088 specifications and produced under a quality management system that complies with either SAE AS9100 or ISO 9001 standards. Because these are classified as Navy Identified Critical Safety Items, the contractor is required to perform zero-based sampling inspections in accordance with MIL-STD-1916 or ASQ H1331. The project is managed by the Department of Defense under the DLA Weapons Support ASC Supplier OEM Division, with the place of performance located in Cherry Point. Interested parties must adhere to the response deadline of November 5, 2026. The contract falls under NAICS code 339999 and focuses on the delivery of fully completed and inspected critical safety hardware.

All Other Miscellaneous Manufacturing

POSTED

about 6 hours ago

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services involves providing military-grade packaging and marking for prime contractors supporting the DLA Weapons Support ASC Supplier Oper OEM Division. The scope of work requires the execution of packaging according to MIL-STD-2073-1E and marking per MIL-STD-129, specifically utilizing preservation method 20, material 49, and wrap material GB. All activities must adhere to RP001 DLA packaging requirements for procurement. The specific deliverable consists of two manifolds that must be packed and palletized for FOB Origin shipment to DLA Distribution San Joaquin. Performance will take place in Tracy, California, under NAICS code 488510. The response deadline for this opportunity is November 5, 2026.

Freight Transportation Arrangement

POSTED

about 6 hours ago

DEADLINE

Fueling Manifold Manufacturing and SupplyThis subcontract involves the manufacture and supply of two fueling manifolds for prime contractors supporting DLA Weapons Support ASC projects. The contractor is responsible for producing or procuring General Electric part number L21783G01, which is classified as a critical application item. All deliverables must strictly adhere to GE and DLA technical specifications, with a specific prohibition on the use of mercury-containing compounds and unauthorized additive manufacturing. The project is managed under the Department of Defense and requires the contractor to complete a CMMC Level 2 self-assessment. Performance will take place in Tracy, California, under NAICS code 332996. Interested parties must respond by November 5, 2026.

Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 6 hours ago

DEADLINE

Supply of Specialized Gaskets (P/N 370119 / 370119-001)This subcontract involves the procurement of 20 specialized gasket units under NSN 5330015027465, specifically matching Hamilton Sundstrand Corporation part numbers 370119 and 370119-001. The contractor is responsible for sourcing and delivering these components to a designated Department of Defense location in Tracy, California, to support prime contractors working with the DLA Weapons Support ASC Supplier Oper OEM Division. All shipments must be packaged and marked in strict accordance with MIL-STD-129 standards. The opportunity is categorized under NAICS code 423830, with a response deadline set for November 5, 2026.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

about 6 hours ago

DEADLINE

Aerospace Surface Treatment and FinishingThis subcontract for Aerospace Surface Treatment and Finishing involves providing specialized surface treatments, plating, and anti-corrosion coatings for prime contractors supporting the DLA Weapons Support ASC Supplier OEM Division. The scope of work specifically requires the application of aerospace-grade plating or passivation to Drag Brace Nuts in accordance with technical drawings for part number 204-011-144-003. The contractor must ensure strict compliance with FED-STD-313 standards and adhere to IP025 guidelines for the packaging of hazardous materials. Final deliverables include finished nuts with verified coating thickness, with performance taking place in New Cumberland. The response deadline for this opportunity is November 5, 2026.

Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

about 6 hours ago

DEADLINE

Aerospace Casting and Forging for Drag Brace NutThis subcontract involves the production and supply of 44 certified raw forged or cast blanks for Drag Brace Nuts, supporting prime contractors on projects for the DLA Weapons Support ASC Supplier Oper OEM Division. The scope of work requires the use of aerospace-grade alloys to perform near-net shape casting or forging specifically for part number 204-011-144-003. The selected provider must ensure strict adherence to quality standards by providing comprehensive material certification, full traceability, and Source Approval Request documentation. Performance for this Department of Defense contract will take place in New Cumberland, Pennsylvania, under NAICS code 332111.

Iron and Steel Forging

POSTED

about 6 hours ago

DEADLINE

Precision Machining of Drag Brace NutsThis subcontract involves the precision machining, threading, and finishing of 44 Drag Brace Nuts for the Department of Defense under the DLA Weapons Support ASC. The contractor is responsible for machining nut bodies to P/N 204-011-144-003 specifications, performing bare item marking according to RQ017, and executing zero-based sampling in compliance with MIL-STD-1916 or ASQ H1331. To qualify, the provider must utilize high-precision CNC lathes and maintain CMMC Level 2 and NIST SP 800-171 compliance. The work is categorized under NAICS code 332710 and will be performed in New Cumberland. The response deadline for this requirement is November 5, 2026.

POSTED

about 6 hours ago

DEADLINE

Military-Grade Packaging and Shipping ServicesThis subcontract for Military-Grade Packaging and Shipping Services involves providing specialized packaging and marking for prime contractors delivering hardware to the DLA Weapons Support ASC. The scope of work requires the application of protective wraps or sleeves to shanks and threads using military-specification materials in strict accordance with MIL-STD-2073-1E and RP001. Additionally, all marking must be executed per MIL-STD-129 to ensure hardware is properly prepared for FOB Origin shipment. The project is managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper OEM Division and will be performed in Portsmouth, zip code 03801-5000. Interested parties should note the response deadline of November 5, 2026. The contract is categorized under NAICS code 488510, focusing on the delivery of fully compliant, ready-to-ship military hardware.

Freight Transportation Arrangement

POSTED

about 6 hours ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Production Lot Testing (PLT) Laboratory Services

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 6 hours ago

DEADLINE

First Article and Production Lot Testing (FAT/PLT)

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 6 hours ago

DEADLINE

PERFORM TCLP METALS ANALYSIS

Solicitation # SP450026F8024

Defense Logistics Agency

POSTED

about 6 hours ago

DEADLINE

Aerospace Battery Qualification Testing Laboratory

Ut DLA Aviation At Ogden

POSTED

about 11 hours ago

DEADLINE

Ultrasonic and Dye Penetrant Inspection Services

Navsup Weapon Systems Support Mech

POSTED

about 11 hours ago

DEADLINE

T/REE and Hf Isotopic Concentration Analysis

Usgs Contracting Activity

POSTED

about 11 hours ago

DEADLINE

U-Pb Geochronologic Analysis (Zircon)

Usgs Contracting Activity

POSTED

about 11 hours ago

DEADLINE

Compliance Certification and Testing Services

DLA Maritime - Puget Sound

POSTED

about 11 hours ago

DEADLINE

in about 22 hours

First Article Testing and Reporting for Inertial Navigation Units

DLA Land Warren

POSTED

about 11 hours ago

DEADLINE

First Article Testing (FAT) and Validation

POSTED

about 11 hours ago

DEADLINE

in about 1 month

Environmental Test Laboratory Services

POSTED

about 11 hours ago

DEADLINE

Antenna Pattern and Gain Testing Specialist

POSTED

about 11 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS