Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Antenna Pattern and Gain Testing Specialist

Active

Federal

Response Deadline11/04/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract opportunity is for an Antenna Pattern and Gain Testing Specialist to support prime contractors on NIWC Atlantic projects within the Department of Defense. The selected provider will perform instrumented antenna testing at the Radio Frequency Test Facility in Hanahan, specifically conducting 2D antenna pattern and gain testing. The scope of work includes documenting capabilities across a 360-degree azimuth and 0 degrees elevation for both standalone and vehicle-mounted antennas, ensuring all activities strictly adhere to IEEE 149 standard test procedures. The primary deliverables for this engagement are comprehensive Antenna Pattern and Gain Documentation and Reports. This requirement falls under NAICS code 541380. Interested parties should note the response deadline of November 4, 2026, to provide the necessary technical expertise for these specialized radio frequency measurements.

General Info

Antenna pattern and gain testing for NIWC Atlantic projects by November 4, 2026.

Agency

Department Of Defense → Niwc Atlantic

NAICS

541380 - Testing Laboratories and Services

Place of Performance

Hanahan, SC, USA

Set-Aside

NONE

Documents

This scope was carved out of N65236-26-RFPREQ-LSUBP00080-0002.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Market Survey for E3 Services Support of C6ISR Systems

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 28

subcontract

Response DeadlineNov 4

Submission deadline

Response Deadline

11/04/2026, 05:00:00 PM UTCin 7 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Niwc Atlantic

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → Niwc Atlantic

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs instrumented antenna testing for prime contractors on NIWC Atlantic projects. Conducts 2D antenna pattern and gain testing at the Radio Frequency Test Facility, documenting capabilities across 360-degree azimuth and 0 degrees elevation for standalone or vehicle-mounted antennas. Adheres to IEEE 149 standard test procedures. Delivers Antenna Pattern and Gain Documentation and Reports.

Similar Contracts

Same NAICS industry code

NDT Inspection for Cam AssemblyThis subcontract involves providing Non-Destructive Testing services for prime contractors supporting DLA Weapons Support ASC aerospace projects. The scope of work focuses on conducting structural integrity inspections of forged and machined cam assemblies utilizing ultrasonic, radiographic, or penetrant methods. All work must be performed in accordance with RQ040 NDT Accreditation Requirements, and the contractor is responsible for delivering certified inspection reports. The project is managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div, with performance taking place at Tinker AFB. Interested parties should note the response deadline of November 5, 2026, and the classification of the work under NAICS code 541380.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 6 hours ago

DEADLINE

Third-Party Inspection and CertificationThis subcontract for Third-Party Inspection and Certification supports the Department of Defense at the Jacksonville Building. The selected provider will perform final inspections and quality validation for prime contractors delivering aviation lighting for the DLA. Responsibilities include conducting functional testing and dimensional inspections using CMM and electrical test equipment to ensure compliance with TDP Rev A Gen 1, culminating in the delivery of certificates of conformance and detailed inspection reports. Critical requirements for this engagement include maintaining CMMC Level 2 certification and coordinating directly with the DCMA for source inspections. The project falls under NAICS code 541380 and is based in Jacksonville, Florida. Interested parties must respond by November 9, 2026.

JACKSONVILLE BLDG

POSTED

about 6 hours ago

DEADLINE

Specialized Testing Laboratory (First Article Test)This subcontract opportunity is for a Specialized Testing Laboratory to perform First Article Testing for prime contractors supporting DLA Weapons Support Land Supplier Operations. The selected provider will be responsible for testing two units using specialized shock and impact testing rigs to verify that performance metrics align with the provided technical data package. The final deliverable for this engagement is a certified FAT Test Report. The project is managed under NAICS code 541380 and will be performed in New Cumberland. Due to the nature of the work, the contractor must have access to ITAR and EAR export-controlled data, and ISO/IEC 17025 certification is preferred. Interested parties must respond by November 9, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 6 hours ago

DEADLINE

First Article Test (FAT) Laboratory ServicesThis subcontract for First Article Test Laboratory Services supports the DLA Weapons Support Nuclear Reactor Program. The selected provider will perform First Article Testing on a single unit of electrical insulation to ensure full compliance with MIL-I-24768/1(1) standards. This process involves utilizing specialized thermal resistance and dielectric testing equipment to validate the component, culminating in the delivery of one validated test unit and a certified First Article Test report. Eligible contractors must hold ISO 9001:2015 or ISO/IEC 17025 certification to qualify for the work. The performance of these services is located at Hill AFB. Interested parties should note the response deadline of November 9, 2026, for this Department of Defense requirement categorized under NAICS code 541380.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 6 hours ago

DEADLINE

Material Testing and Certification LaboratoryThis subcontract for the DLA Weapons Support Land Supply Chain involves providing Material Testing and Certification Laboratory services to perform Production Lot Testing for prime contractors. The primary objective is to validate the quality conformance of O-rings by reviewing material certifications, process operation sheets, and inspection method sheets. Specific technical requirements include verifying asbestos-free composition and ensuring surface imperfections adhere to ISO 3601-3 standards, culminating in the delivery of a comprehensive Test Report. The project is based in Keyport, Washington, and falls under NAICS code 541380. Due to the nature of the technical data handled during the certification process, the contractor must maintain CMMC Level 2 compliance. Interested parties should note the response deadline of November 9, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 6 hours ago

DEADLINE

First Article Testing (FAT) ServicesThis subcontract for First Article Testing services is issued by the Department of Defense through the DDSP New Cumberland Facility. The selected contractor will perform quality conformance inspection and testing for prime contractors delivering DLA supply contracts, specifically focusing on one prototype unit. Using laboratory equipment, the contractor must verify material specifications, durability, and pressure in strict accordance with MIL-H-24580. The scope of work requires the delivery of a comprehensive test report and one validated First Article unit, with all test results provided to the Engineering Support Activity. This opportunity is designated as a Total Small Business Set-Aside under NAICS code 541380. Performance will take place in New Cumberland, Pennsylvania, with responses due by November 9, 2026.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 6 hours ago

DEADLINE

First Article Testing and Inspection ServicesThis subcontract for First Article Testing and Inspection Services involves providing specialized validation for prime contractors supporting Defense Logistics Agency supply contracts. The selected provider will use high-precision metrology equipment, such as optical comparators or CMM, to verify that the dimensions and tolerances of a first-article sample for NSN 5305-01-470-6044 align with required technical data. To qualify, the contractor must maintain an inspection system compliant with ISO 9001 or SAE AS9003 standards. The final deliverables for this engagement include the tested first article unit and a completed FAT certification report. The solicitation was posted on October 28, 2026, with a response deadline of November 5, 2026, under NAICS code 541380.

Defense Logistics Agency

POSTED

about 6 hours ago

DEADLINE

Electrical Testing and Certification LaboratoryThis subcontract opportunity is for an Electrical Testing and Certification Laboratory to provide independent verification and testing of cable assemblies for prime contractors supporting DLA Weapons Support ASC projects. The scope of work involves conducting Product Verification Testing, which includes electrical continuity, voltage withstand, and physical dimension checks. All sampling and inspections must be performed using calibrated measurement tools in accordance with MIL-STD-1916 or ASQ H1331 standards, culminating in the delivery of formal test reports and certifications of compliance. Managed by the Department of Defense under the DLA Weapons Support ASC Commodities Division, this requirement is designated as a Total Small Business Set-Aside under NAICS code 541380. The solicitation was posted on October 28, 2026, with a response deadline of November 12, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 6 hours ago

DEADLINE

Non-Destructive Testing (NDT) ServicesThis subcontract for Non-Destructive Testing services supports prime contractors on DLA Weapons Support ASC aerospace projects located at Hill AFB. The scope of work involves performing X-ray, ultrasonic, dye penetrant, or magnetic particle inspections on Air Director Ducts in strict accordance with the provided technical data package. The selected provider is responsible for delivering comprehensive NDT inspection reports and formal certification of part integrity. To qualify for this engagement, the contractor must possess RQ040 NDT Accreditation and have access to the necessary NDT-specific equipment. This opportunity falls under NAICS code 541380 and is managed by the Department of Defense. Interested parties must submit their responses by November 5, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 6 hours ago

DEADLINE

Third-Party Quality Conformance InspectionThis subcontract for the DLA Weapons Support Nuclear Reactor Program involves providing third-party quality conformance and critical source inspections for prime contractors. The selected provider will conduct inspections at the point of origin, utilizing precision measurement tools and sampling plans in accordance with MIL-STD-1916 or ASQ H1331 to ensure all technical requirements of the DLA Master List RA001 are met. Key deliverables include the submission of detailed inspection reports and formal quality certification documents. The project is managed by the Department of Defense under NAICS code 541380, with the place of performance located in Jacksonville, Florida. Interested parties must respond by November 9, 2026, regarding this requirement for specialized quality assurance services.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 6 hours ago

DEADLINE

Materials Testing Laboratory (First Article Test)This subcontract involves providing First Article Testing services for the Department of Defense DLA Weapons Support Fluid Handling Division. The selected laboratory will perform testing on three units of nonmetallic tubing to ensure full compliance with MIL-PRF-6855F and MIL-PRF-6855/5A standards. Using certified equipment, the contractor must verify the materials' resistance to chemical exposure as well as their performance under specific pressure and temperature conditions. The project is categorized under NAICS code 541380 and will be performed in New Cumberland. A critical requirement of the agreement is the delivery of a formal FAT test report, which must be submitted within 60 calendar days of the contract date. Interested parties should note the response deadline of November 9, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 6 hours ago

DEADLINE

Production Lot Testing and Quality ReportingThis subcontract for Production Lot Testing and Quality Reporting supports the DLA Weapons Support Fluid Handling Division. The selected provider will perform specialized production lot testing and inspections for prime contractors, utilizing pressure testing and leak detection systems. All work must adhere to zero-based sampling plans, specifically MIL-STD-1916, and culminate in the delivery of certified test results and detailed Production Lot Test reports. The project is based in San Diego, California, and falls under NAICS code 541380. Due to the nature of the sensitive data involved, the contractor is required to maintain CMMC Level 2 certification. Interested parties must submit their responses by November 9, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 6 hours ago

DEADLINE

More opportunities from Department Of Defense → Niwc Atlantic

Same awarding agency

EMI/EMC Curriculum DeveloperThis subcontract opportunity with NIWC Atlantic under the Department of Defense seeks a curriculum developer to create and deliver technical training focused on Electromagnetic Interference (EMI) and Electromagnetic Compatibility (EMC). The selected provider will be responsible for developing instructional materials and training modules tailored for prime contractors on Department of the Navy projects, utilizing e-learning platforms and specialized training software. The project requires deep subject matter expertise in E3 to ensure the delivery of high-quality curriculum and course materials. Performance will take place in Hanahan, and interested parties must respond by November 4, 2026. The work falls under NAICS code 611430, focusing on professional and management development training.

Professional and Management Development Training

POSTED

about 11 hours ago

DEADLINE

Environmental Test Laboratory ServicesThis subcontract for Environmental Test Laboratory Services supports NIWC Atlantic projects by providing physical environmental stress testing for C6ISR hardware. The scope of work includes conducting specialized tests for shock, vibration, altitude, salt fog, temperature, and humidity utilizing vibration tables, salt spray chambers, and environmental chambers. The selected provider is required to maintain ISO/IEC 17025 lab certification and must deliver formal Environmental Test Reports upon completion of the testing. The project is categorized under NAICS code 541380 and will be performed in Hanahan. Interested parties should note the response deadline of November 4, 2026, for this Department of Defense requirement.

Testing Laboratories and Services

POSTED

about 11 hours ago

DEADLINE

TEMPEST and Protected Distribution Systems (PDS) AuditorThis subcontract opportunity with NIWC Atlantic involves providing specialized security testing and inspections for prime contractors to prevent electromagnetic emanations. The selected provider will be responsible for conducting TEMPEST testing, surveys, and Protected Distribution Systems (PDS) inspections and certifications. These tasks require the use of TEMPEST-specific measurement equipment and the delivery of formal PDS Certification Reports and TEMPEST Survey Results. Qualified candidates must possess a Secret or Top Secret security clearance and demonstrate technical proficiency with IA PUB-5239-22 and CNSSI 7003 standards. The work is located in Hanahan and falls under NAICS code 541690. Interested parties must respond by November 4, 2026.

Other Scientific and Technical Consulting Services

POSTED

about 11 hours ago

DEADLINE

RF Modeling and Simulation EngineerThis subcontract opportunity for an RF Modeling and Simulation Engineer supports NIWC Atlantic E3 projects within the Department of Defense. The role involves performing theoretical analysis and software-based modeling to determine RADHAZ effects and predict radio frequency interference in complex environments. Utilizing tools such as MATLAB and the ANSYS Electromagnetic Interference Toolkit, the engineer will evaluate co-site coexistence RFI effects and develop necessary mitigating solutions. Key deliverables for this position include RADHAZ analyses, RFI prediction reports, and formal mitigation recommendations. The work is based in Hanahan and requires the personnel to hold either a Secret or Top Secret security clearance. Interested parties should note the response deadline of November 4, 2026.

Engineering Services

POSTED

about 11 hours ago

DEADLINE

EMI/EMC Test and Evaluation SpecialistThis subcontract opportunity with NIWC Atlantic involves providing EMI and EMC testing and evaluation services for C6ISR systems projects. The selected specialist will be responsible for conducting instrumented surveys at USN and USMC activities, recording emitter output power and antenna correction factors, and performing certification testing for communication suites using specialized test and data reduction equipment. All final deliverables must be submitted as EMI/EMC Test Reports in accordance with DI-EMCS-80200C. The position is based in Hanahan and requires the personnel to hold a Common Access Card and a security clearance at the Confidential, Secret, or Top Secret level. Interested parties should note that the response deadline is November 4, 2026.

Testing Laboratories and Services

POSTED

about 11 hours ago

DEADLINE

Market Survey for E3 Services Support of C6ISR Systems

Solicitation # N65236-26-RFPREQ-LSUBP00080-0002

The Naval Information Warfare Center, Atlantic (NIWC Atlantic) is conducting a market survey for a contract to provide Electromagnetic Environmental Effects (E3) Test, Evaluation, Training, and Range Services in support of C6ISR Systems. The anticipated scope of work includes testing electromagnetic radiation and spectrum effects, supporting the TEMPEST Program and Protected Distribution Systems inspections, and performing environmental testing such as shock, vibration, altitude, and temperature/humidity. The effort is aligned with the Navy's Information Dominance Roadmap for Electromagnetic Spectrum Usage and the Secretary of Defense's Electromagnetic Spectrum Superiority Strategy. The primary place of performance is at NIWC Atlantic, with potential travel to various CONUS and OCONUS locations. The government anticipates a five-year ordering period with an estimated value between 10 million and 50 million dollars, utilizing approximately 15 full-time equivalents per year. The contract is expected to be a firm-fixed price type for labor and calibration, with cost-reimbursement for materials and travel. Key requirements include adherence to IEEE 149 antenna test procedures, strict cybersecurity compliance, and the use of the DoD Wide Area Work Flow for invoicing. Contractors must maintain appropriate facilities, possess PKI client-side authentication capabilities, and comply with DFARS regulations regarding counterfeit electronic parts and government property management. Responses to this market survey are due by November 4, 2026.

Testing Laboratories and Services

POSTED

about 11 hours ago

DEADLINE

Notice of Intent to Sole Source - Economic Impact Assessment

Solicitation # N65236-26-SIMACQ-LBUSP00030-0034

Other Scientific and Technical Consulting Services

POSTED

about 11 hours ago

DEADLINE

Solicitation # N6523618D1001

POSTED

DEADLINE

LIPTM00074, DHA/HSI IPT, 25-012 RUCKUS FOR JUST IN TIME FY25 LAN & MULTIPLE SITES- SEWP (C)This forecast involves the procurement of Ruckus equipment for Just In Time FY25 LAN requirements across multiple sites, managed by the Naval Information Warfare Systems Command Atlantic. The project, identified as LIPTM00074, is intended to support the Defense Health Agency and Health Service Integration Integrated Product Team. The performance of this contract is centered in North Charleston, and the acquisition process is being facilitated through the SEWP vehicle. Sean Johnson serves as the primary contracting officer and point of contact for this effort.

POSTED

DEADLINE

LIPTM00006_North American Aerospace Defense Command (NORAD) NORTHCOM_Audiovisual Material_SEWP (C)

POSTED

DEADLINE

LIPTM00468, NISE, MORT (TT-25-001), SEWP (C)This forecast involves the procurement of OPTIA COTS-rugged 556 Ammo Can Servers, manufactured by United Computer Products, Co., Inc. under part number A55399E83NN. These specialized servers are designed for rugged environments and are currently utilized by the U.S. Marine Corps. The acquisition is being managed by the Naval Information Warfare Systems through Niwc Atlantic, with the place of performance located in Charleston. The opportunity is categorized under NAICS code 334118 and is associated with the LIPTM00468, NISE, MORT, and SEWP programs. Bridgette Clayton serves as the primary Contracting Officer, supported by Kimberly Z. Young as the secondary point of contact. The forecast was posted on October 18, 2026, as part of a long range acquisition estimate.

Computer Terminal and Other Computer Peripheral Equipment Manufacturing

POSTED

DEADLINE

LIPTM00085 USMC Electronic Security Systems (ESS) InfraLink Software License/Support Renewal-SEWP (C)This forecast involves the renewal of software licenses and support for InfraLink, specifically supporting Electronic Security Systems for the United States Marine Corps. Managed by Naval Information Warfare Systems Command Atlantic, the contract aims to facilitate development activities and system upgrades for fielded systems at USMC installations globally. The requirement is categorized under NAICS code 513210 and is expected to be performed in North Charleston. Christopher M. Brown serves as the primary point of contact for this acquisition, which is intended to maintain critical security infrastructure through the SEWP vehicle.

Software Publishers

POSTED

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Aviation Component Inspection and Test Services

Ok DLA Aviation At Oklahoma City

POSTED

about 11 hours ago

DEADLINE

in about 1 month

Recreational Boat Testing and Retesting

POSTED

about 11 hours ago

DEADLINE

Recreational Boat Testing and Inspection Services

POSTED

about 11 hours ago

DEADLINE

Aerospace NDT Inspection and Quality Validation

Ok DLA Aviation At Oklahoma City

POSTED

about 11 hours ago

DEADLINE

Electronic Component Testing and Inspection Services

Navsup Weapon Systems Support

POSTED

about 11 hours ago

DEADLINE

Aviation Controller Inspection and Functional Testing

POSTED

about 11 hours ago

DEADLINE

Environmental Air Monitoring and Site Security Services

W07V Endist St Louis

POSTED

about 11 hours ago

DEADLINE

Groundwater Monitoring in Wabasha County, MN

Solicitation # W912ES27QA013

W07V Endist St Paul

POSTED

about 11 hours ago

DEADLINE

H966--MONTHLY VIABLE SURFACE SAMPLING

Solicitation # 36C26127Q0104

261-NETWORK Contract Office 21 (36C261)

POSTED

about 11 hours ago

DEADLINE

Stability Testing for ManNAc Drug Product produced in Campaigns 5 and 6. Stability testing will occur under regulatory compliance

Solicitation # 75N98027Q00040

National Institutes Of Health Olao

POSTED

about 11 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS