This Government Contract opportunity from Department Of Defense was posted on October 1, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

First Article Test (FAT) Laboratory Services

Closed

Federal

Submission Closed10/13/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 541380

New

RFQ#9783 Respirable Crystalline Silica Exposure Assessment

Solicitation # RFQ#9783

Management & Training Corporation (MTC) is soliciting bids under RFQ#9783 for a qualified industrial hygiene consultant to conduct a respirable crystalline silica exposure assessment at the Edison Job Corps Center in Edison, New Jersey. The project focuses on the Brick Trade training program, specifically evaluating potential silica dust exposure for 27 students and instructors during activities such as sand handling and brick cutting. The selected consultant will be responsible for performing site assessments, implementing a personal breathing-zone air sampling plan, and comparing results against OSHA permissible exposure limits and action levels. Key deliverables include a written report, laboratory results, and a prioritized corrective action plan for dust control. This is a fee-for-service subcontracting opportunity open to various small business categories, including VOSB, SDVOSB, WOSB, and HUBZone firms. Bids must be submitted by November 6, 2026, and must include a bid sheet, completed supplier packet, proof of insurance, and three references for similar projects. Award decisions will be based on best value, evaluating the consultant's qualifications in occupational exposure assessment and their proposed technical approach. The contract requires compliance with Service Contract Labor Standards, FAR regulations regarding small business utilization and debarment disclosure, and strict government confidentiality and security protocols.

POSTED

DEADLINE

Metallurgical Testing and Certification ServicesThis subcontract for Metallurgical Testing and Certification Services supports prime contractors on Army Contracting Command projects at the Watervliet Arsenal. The scope of work involves performing comprehensive chemical and mechanical testing on aluminum bronze samples, specifically focusing on yield strength, tensile strength, elongation, and Rockwell Hardness with a minimum requirement of B-95. Chemical analysis must be conducted using spectrometers to verify the precise alloy composition. To ensure quality and compliance, the service provider must maintain ISO/IEC 17025 accreditation and deliver all results via Certified Test Reports in accordance with DD Form 1423. This opportunity is designated as a Total Small Business Set Aside under NAICS code 541380 for the Department of Defense. Responses are due by November 13, 2026.

POSTED

DEADLINE

Ultrasonic Testing (UT) SpecialistThis subcontract opportunity is for an Ultrasonic Testing Specialist to support prime contractors on USCG Surface Force Logistics Center vessel projects located in Panama City, Florida. The selected provider will be responsible for conducting ultrasonic testing as specified in work item D-002 to evaluate the structural integrity of hulls and various components. Key deliverables include the submission of detailed UT inspection reports and comprehensive thickness measurement data. The contract is designated as a total Small Business Set Aside under NAICS code 541380 and is managed by the Department of Homeland Security. Qualified candidates must hold an NDT Level II or III certification to perform the required technical evaluations. The response deadline for this opportunity is November 12, 2026.

POSTED

DEADLINE

Medium and Low Voltage Electrical System Testing

246-NETWORK Contracting Office 6 (36C246)

POSTED

DEADLINE

Groundwater Monitoring in Wabasha County, MN

Solicitation # W912ES27QA013

The U.S. Army Corps of Engineers St. Paul District is soliciting a firm fixed price contract for groundwater monitoring services to support the Grand Encampment Dredge Material Placement Site Unload project near Kellogg, Minnesota. This procurement is a total small business set-aside under NAICS 541380. The selected contractor will be responsible for collecting and analyzing water samples from three monitoring wells, up to four residential wells, the Zumbro River, and the active placement pit. The project is divided into three phases: Pre-Placement baseline sampling, Active Placement monitoring during the Spring 2027 unload, and Post-Placement monitoring. All analytical testing must be performed by a laboratory accredited under the Minnesota Environmental Laboratory Accreditation Program, and field protocols must align with MPCA 2026 standards. The period of performance spans from January 2027 through December 2027, with deliverables including interim technical memoranda, an electronic data deliverable, and a final sampling and analysis report due within 50 days of testing completion. Award will be based on an evaluation of price, technical rating, and past performance. The contractor must adhere to strict confidentiality requirements regarding private residential well owners and maintain secure data transmission. Inspection and acceptance will occur at the destination in Alma, Wisconsin. Offers must be submitted via the PIEE module, including the offeror's Unique Entity Identifier and CAGE code, by the specified deadline.

POSTED

DEADLINE

Aquatic Feed Quality Control & Lab Analysis

Inland Fisheries & Wildlife

POSTED

DEADLINE

Materials Testing ServicesThis subcontract for Materials Testing Services supports prime contractors working on operations projects for the Savannah-Chatham County Public School System in Georgia. The selected provider will be responsible for performing critical construction material evaluations, including concrete slump tests, cylinder compression testing, asphalt testing, and soil compaction testing utilizing nuclear gauges. To ensure quality and compliance, the contractor must maintain laboratory accreditation according to AASHTO or ASTM standards. Key deliverables include the submission of detailed material test reports and current laboratory certification data. The solicitation was posted on November 3, 2026, with a response deadline of December 8, 2026.

Savannah/chatham County Public School System

POSTED

DEADLINE

Special InspectionsThis subcontract opportunity is for the provision of specialized inspections for construction materials and installations on operations projects for the Savannah-Chatham County Public School System in Georgia. The selected contractor will be responsible for verifying the integrity of reinforcement steel, concrete placement, and structural steel bolting and welding. These tasks must be performed using calipers and non-destructive testing equipment to ensure all work meets project specifications. Qualified candidates must hold certifications from the International Code Council to perform these services. The scope of work includes the delivery of detailed inspection reports and formal certifications of compliance. Interested parties must submit their responses by the deadline of December 8, 2026.

Savannah/chatham County Public School System

POSTED

DEADLINE

RFQ #26-007 - Smartmatic VSR1 2.1 Voting System

Solicitation # 26-007

The California Secretary of State is soliciting a state approved testing agency to provide voting system test support services for the evaluation of the Smartmatic VSR1 2.1 voting system. The primary objective is to determine the system's suitability for use in California by conducting functional, hardware, and volume testing, as well as usability, accessibility, and privacy evaluations. All testing must adhere to the California Voting Systems Standards and relevant sections of the California Elections Code. The contractor will also be responsible for providing support and presentations for public hearings. The anticipated period of performance is from January 2, 2027, through January 1, 2029. This is a low-cost award based on a pass/fail evaluation of administrative and technical requirements. Mandatory qualifications for the contractor include extensive experience in voting technology system design, security analysis, source code review, and government-level testing, with specific requirements ranging from three to six years of experience in these areas. Additionally, the contractor must demonstrate proficiency with Microsoft server and workstation operating systems and SQL server. The contract includes strict confidentiality requirements via non-disclosure agreements and requires compliance with California civil rights laws and non-discrimination programs. Payment is contingent upon satisfactory performance and the submission of itemized invoices.

POSTED

DEADLINE

Chemical and Biological Water/Wastewater TestingThis subcontract involves providing comprehensive laboratory analysis for drinking water and wastewater samples on projects managed by the California Department of State Hospitals. The scope of work includes biological testing for E-Coli, chemical testing for BOD, and nutrient and mineral analysis for TKN, Nitrate, and Ammonia. All testing must be performed in strict accordance with USEPA, ASTM, and Title 22 CCR standards, and the contractor is required to maintain ELAP certification from the State Department of Health Services. The selected provider will be responsible for delivering detailed analytical reports and Quality Control Reports to prime contractors. This opportunity falls under NAICS code 541380, with a response deadline set for December 1, 2026.

California Department of State Hospitals

POSTED

DEADLINE

26-64013 Drinking and Wastewater Testing

Solicitation # 26-64013

The California Department of State Hospitals (DSH) is soliciting bids for a contractor to provide comprehensive chemical, biological, and miscellaneous laboratory testing services for drinking water and wastewater at the DSH-Coalinga facility. The selected contractor will be responsible for providing all labor, equipment, and transportation, including the supply of sterilized collection containers and preservation materials adhering to USEPA and California Department of Health Services standards. Services include routine sample pick-ups between 7:00 am and 3:00 pm, Monday through Friday, as well as additional testing as directed by DSH. The anticipated start date for these services is March 1, 2027. The contract will be awarded to the lowest responsive and responsible bidder. To be considered responsive, bidders must submit a physical, sealed bid package containing Attachments 1 through 12 by the December 1, 2026, deadline. Key requirements include certification by the State Department of Health Services Environmental Laboratory Accreditation Program (ELAP) and the provision of both performance and payment bonds not less than the contract price. While the mandatory DVBE participation requirement has been waived, preference adjustments are available for certified Small Businesses, Microbusinesses, and Disabled Veteran Business Enterprises. The agreement is based on the State of California Department of General Services Standard Agreement and is subject to the availability of funds under the Budget Act.

California Department of State Hospitals

POSTED

DEADLINE

Respirable Crystalline Silica Exposure Assessment ConsultantThis subcontract opportunity is for a qualified Industrial Hygiene Consultant to perform a respirable crystalline silica exposure assessment at the Edison Job Corps Center. The selected consultant will conduct air sampling during specific activities, including sand handling, fire clay mixing, and brick or tile cutting, to evaluate the adequacy of dust controls and determine the level of exposure for students and instructors. The scope of work requires the use of professional industrial hygiene sampling equipment and analytical laboratory services to produce a final exposure assessment report containing detailed findings and recommendations. The project is designated as a small business set-aside, welcoming applications from SBA certified Veteran Owned, Service-Disabled Veteran Owned, Women-Owned, and HUBZone small businesses. Falling under NAICS code 541380, the contract was posted on November 2, 2026, with a response deadline of November 6, 2026.

Edison Job Corps

POSTED

about 18 hours ago

DEADLINE

in 2 days

AI Contract Overview

This subcontract for First Article Test Laboratory Services supports the Department of Defense Active Devices Division. The selected provider will perform First Article Testing on a single sample unit for NSN 5945-00-931-0422 to verify that performance and specifications align with technical data and material standards. Work involves utilizing electronic testing and measurement equipment to ensure compliance, with final deliverables consisting of a FAT Test Report and a certification of compliance. The project is categorized under NAICS code 541380 and will be performed at Hill AFB. Interested parties must respond by October 13, 2026, following the posting date of October 1, 2026.

General Info

First Article Testing for NSN 5945-00-931-0422 at Hill AFB, due October 13, 2026.

Agency

Department Of Defense → ACTIVE DEVICES DIVISION

NAICS

541380 - Testing Laboratories and Services

Place of Performance

HILL AFB, UT, 84056-5734, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7M5-27-T-0033.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

RELAY, ELECTROMAGNETIC

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedOct 1

subcontract

Response DeadlineOct 13

Deadline has passed

Submission Closed

10/13/2026, 05:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → ACTIVE DEVICES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → ACTIVE DEVICES DIVISION

Office AddressN/A

ContactsNo contact information available

Full Description

Performs First Article Testing (FAT) for prime contractors on Active Devices Division projects. Conducts testing on one sample unit to verify performance and specifications against technical data for NSN 5945-00-931-0422 using electronic testing and measurement equipment. Testing must be performed to NSN/Material standards. Delivers a FAT Test Report and certification of compliance.

More opportunities from Department Of Defense → ACTIVE DEVICES DIVISION

Same awarding agency

First Article Test (FAT) Laboratory Services

Contract Overview

Active Opportunities Like This One

AI Contract Overview

General Info

Documents

AI Contract Breakdown

No documents to break down

Timeline

Find active opportunities like this

Organization & Contact Information

Full Description

More opportunities from Department Of Defense → ACTIVE DEVICES DIVISION

Earlier notices in this NAICS code

Get AI-powered intelligence on the opportunities still open