Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

First Article Testing and Validation Services

Active

Federal

Response Deadline09/21/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for First Article Testing and Validation Services involves the initial production and testing of sample units for prime contractors on DLA Aviation projects. The scope of work requires the production of three units of NSN 2915-00-939-1538, which will undergo government testing at the Tinker AFB DDOO-SOP. To ensure compliance with the technical data package per FAR 52.209-4, precision measurement equipment will be used to verify all specifications. The final deliverables consist of three validated sample units and their corresponding test reports, which are necessary for production lot approval. This effort is managed under NAICS code 336412 for the Department of Defense, specifically the ASC Supplier Oper OEM Division, with performance taking place at Tinker AFB.

General Info

Subcontract for producing and validating three sample units for DLA Aviation at Tinker AFB.

Agency

Department Of Defense → ASC SUPPLIER OPER OEM DIVISIONView Agency

NAICS

336412 - Aircraft Engine and Engine Parts ManufacturingView NAICS

Place of Performance

TINKER AFB, OK, 73145-8000, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A5-26-T-421Q.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

ROD, THROTTLE VALVE, FUE

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedSep 13

subcontract

Response DeadlineSep 21

Submission deadline

Response Deadline

09/21/2026, 05:00:00 PM UTCin 8 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → ASC SUPPLIER OPER OEM DIVISION

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → ASC SUPPLIER OPER OEM DIVISION

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs initial production run and testing of sample units for prime contractors on DLA Aviation projects. Produces 3 units of NSN 2915-00-939-1538 for government testing at Tinker AFB DDOO-SOP. Uses precision measurement equipment to verify specifications against the technical data package per FAR 52.209-4. Delivers 3 validated sample units and associated test reports for production lot approval.

Similar Contracts

Same NAICS industry code

Manufacture of Throttle Valve Fuel Control RodsThis subcontract with the Department of Defense involves the manufacture of 16 precision-machined throttle valve fuel control rods under NSN 2915-00-939-1538. The project requires the use of CNC and grinding equipment to meet strict aerospace specifications and Air Force Critical Safety Item tolerances. Performance will take place at Tinker AFB, with final products packaged according to MIL-STD-2073-1E. The provider must maintain an SAE AS9100 Quality Management System and ensure full compliance with DFARS 252.204-7012 cybersecurity standards and the Buy American program. This opportunity falls under NAICS code 336412 and is managed by the ASC Supplier Oper OEM Division.

ASC SUPPLIER OPER OEM DIVISION

POSTED

about 5 hours ago

DEADLINE

Supply of Critical Application Item (NSN 1620-01-048-8488)This subcontract, issued by the Department of Defense ASC Supplier Oper AE and AF Div, involves the manufacture or sourcing of nine units of the critical application hardware component NSN 1620-01-048-8488. The project requires the use of specialized tooling for aircraft-related components and mandates the delivery of one unit for First Article Testing within 30 calendar days. The contract is designated as a Total Small Business Set-Aside under NAICS code 336412 and will be performed in New Cumberland, Pennsylvania. Responses to the solicitation are due by September 21, 2026, to support prime contractors delivering DLA supply contracts.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 5 hours ago

DEADLINE

PARTS KIT, FUEL FLOW PR

Solicitation # SPE7M4-26-T-407K

DLA Land And Maritime is soliciting quotes for the procurement of 50 fuel flow parts kits under solicitation number SPE7M426T407K. The approved source for this requirement is 86090 81503-1, and the items are to be delivered to the DLA Distribution Depot in Oklahoma within 366 days after the order is placed. This is a combined solicitation under NAICS code 336412, with quotes due by September 24, 2026. All submissions must be made electronically via the provided link, as hard copies of the solicitation and related technical drawings or specifications are not available. All responsible sources are invited to submit timely quotes for consideration.

FLUID HANDLING DIVISION

POSTED

about 5 hours ago

DEADLINE

JET ASSEMBLY, COMPRESSO

Solicitation # SPE4A5-26-T-422P

ASC SUPPLIER OPER OEM DIVISION

POSTED

about 5 hours ago

DEADLINE

SCREW, ASSEMBLED WASHER

Solicitation # SPE4A6-26-T-29CZ

ASC COMMODITIES DIVISION

POSTED

about 5 hours ago

DEADLINE

CONTROL ASSEMBLY

Solicitation # SPE4A7-26-T-733Z

DLA Aviation is soliciting quotes for the procurement of 109 units of Control Assembly NSN 2915011701224 under solicitation number SPE4A726T733Z. The items are to be delivered to DLA Distribution Red River within 154 days after the order is placed. This request for quote is open to all responsible sources, though specific approved sources have been identified. The solicitation was posted on September 13, 2026, with a response deadline of September 21, 2026. All quotes must be submitted electronically via the provided link, as hard copies of the solicitation and associated technical drawings or specifications are not available. The procurement falls under NAICS code 336412 and is managed by the Department of Defense office located in Richmond, Virginia.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 5 hours ago

DEADLINE

SCREW, CAP, HEXAGON H

Solicitation # SPE4A6-26-T-29BJ

ASC COMMODITIES DIVISION

POSTED

about 5 hours ago

DEADLINE

ROD, THROTTLE VALVE, FUE

Solicitation # SPE4A5-26-T-421Q

DLA Aviation is seeking quotes for the procurement of throttle valve fuel rods under solicitation SPE4A526T421Q. The requirement consists of two line items: 16 units to be delivered within 577 days after order and one unit to be delivered within 30 days after order, both shipping to the DLA Distribution Depot in Oklahoma. This opportunity is categorized under NAICS code 336412 and is open to all responsible sources. Interested parties must submit their quotes electronically by the deadline of September 21, 2026. Inquiries regarding this procurement should be directed to the buyer via the DLA Dibbs portal.

ASC SUPPLIER OPER OEM DIVISION

POSTED

about 5 hours ago

DEADLINE

WIRE, RETAINING

Solicitation # SPE4A5-26-T-422V

Solicitation SPE4A5-26-T-422V is a request for quotations issued by the DLA Aviation ASC Supplier Oper OEM Division for the procurement of three retaining wires, identified by NSN 2995-01-204-6234 and Parker-Hannifin part number 2198039-1. This item is classified as a commercial critical application item with no shelf life requirement. The delivery is required within five days of award, with an original required delivery date of September 4, 2026. Shipping is FOB Origin, and the destination for both inspection and acceptance is the DD Depot at Tinker AFB, Oklahoma. The contract mandates strict adherence to the DLA Master List of Technical and Quality Requirements, including specific standards for packaging (ASTM D3951 and RP001), marking (MIL-STD-129), and measuring and test equipment (RT001). Quality assurance involves sampling methods per MIL-STD-1916 or ASQ H1331, with a requirement for zero non-conformances in the sample lot. Administrative requirements include the use of the Wide Area Workflow system for invoicing and compliance with DFARS 252.204-7012 for safeguarding covered defense information. The solicitation also incorporates various FAR and DFARS clauses regarding the Buy American Act, sustainable products, and the prohibition of trafficking in persons.

ASC SUPPLIER OPER OEM DIVISION

POSTED

about 5 hours ago

DEADLINE

Solicitation # SPE4A0-26-T-4802

AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 5 hours ago

DEADLINE

Solicitation # SPE4A7-26-T-736Y

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 5 hours ago

DEADLINE

2027-SG-0010 - B300 and Cessna 206 Simulator PurchaseThe Drug Enforcement Administration, under the Department of Justice, is forecasting the purchase of a new Beechcraft B300 Garmin G1000 and Cessna 206H/T206H flight simulator intended for pilot training. This procurement falls under NAICS code 336412 and was posted on September 13, 2026. The place of performance for this contract is located in Fort Worth, Texas. Interested parties can coordinate through the DEA Vendor Engagement office or the DEA Small Business Program for further information regarding this opportunity.

Drug Enforcement Administration

POSTED

about 16 hours ago

DEADLINE

More opportunities from Department Of Defense → ASC SUPPLIER OPER OEM DIVISION

Same awarding agency

Supply of Plain Encased Seals (NSN 5330014394740)This subcontract involves the manufacture or procurement of plain encased seals under NSN 5330014394740 for the Department of Defense, specifically the ASC Supplier Oper OEM Division. The contractor is responsible for delivering one unit of the specified seal to a designated DLA shipping point in FPO 09578, ensuring all items meet the DLA Master List of Technical and Quality Requirements. Strict adherence to packaging and marking standards is required, specifically following RP001 and RQ017 guidelines. This opportunity falls under NAICS code 332999 and has a response deadline of September 21, 2026.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 5 hours ago

DEADLINE

Aircraft Thermal Insulation Blanket SupplyThis subcontract with the Department of Defense ASC Supplier Oper OEM Division involves the supply of seven aircraft thermal insulation blankets, identified by NSN 1660016680127 and Sikorsky Aircraft Corporation part number 06208-02827-110. The contractor is responsible for manufacturing or sourcing these items to meet Critical Application Item quality standards, with performance taking place in New Cumberland, Pennsylvania. Compliance requirements include packaging according to ASTM D3951 and marking packaging in accordance with MIL-STD-129. The procurement falls under NAICS code 336413 and is intended for prime contractors working on DLA Aviation projects.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 5 hours ago

DEADLINE

Supplier of Angle Brackets (P/N 2718M79G01)This subcontract through the Department of Defense ASC Supplier Oper OEM Division involves the supply of a specific angle bracket, part number 2718M79G01, for prime contractors. The supplier must ensure the component adheres to General Electric Company 07482 standards, RP001 DLA Packaging Requirements, and DLA Master List technical and quality specifications. The contract requires the delivery of one packaged angle bracket meeting all OEM specifications, shipped via the fastest traceable means. Performance is centered in Springfield, Illinois, with a response deadline of September 21, 2026.

Hardware Manufacturing

POSTED

about 5 hours ago

DEADLINE

Supply of Flanged Bearings (NSN 1650016651287)This subcontract through the Department of Defense ASC Supplier Oper OEM Division requires the manufacture or sourcing of 2,000 flanged bearings adhering to NSN 1650016651287 specifications. The selected provider must ensure all items are palletized according to RP001 DLA Packaging Requirements for Procurement and delivered to the designated location in Cherry Point. Eligible candidates must possess a valid CAGE code and an active SAM registration to participate. The opportunity is listed under NAICS code 332991, with a response deadline of September 21, 2026.

Ball and Roller Bearing Manufacturing

POSTED

about 5 hours ago

DEADLINE

Aerospace Component Packaging and Marking Services

Freight Transportation Arrangement

POSTED

about 5 hours ago

DEADLINE

Manufacturing of Pump Housing Filler Caps

POSTED

about 5 hours ago

DEADLINE

Supply of Ring, Grab Fasteners

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 5 hours ago

DEADLINE

Supply of Knob Assembly, Pedal AdjusterThis subcontract involves the manufacture or sourcing of one Knob Assembly, Pedal Adjuster, identified by NSN 1560-00-403-5304, for prime contractors under DLA Aviation supply contracts. The Department of Defense, through the ASC Supplier OEM Division, requires the item to be marked and labeled according to MIL-STD-129 and hazardous materials to be labeled per 29 CFR 1910.1200. The contract falls under NAICS code 336413 and specifies Minot AFB in ZIP code 58705-5001 as the place of performance. The solicitation was posted on September 13, 2026, with a response deadline of September 21, 2026.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 5 hours ago

DEADLINE

Wire Rope Assembly (NSN 4010-01-324-0180) SupplierThis subcontract involves the manufacture and supply of a single-leg wire rope assembly conforming to NSN 4010-01-324-0180 for prime contractors under DLA Aviation supply contracts. The supplier is responsible for ensuring all wire rope materials and assembly hardware meet strict technical standards, with the final product being packaged and shipped to Fort Eustis, Virginia, in accordance with DLA shipping and labeling requirements. The opportunity is managed by the Department of Defense under the ASC Supplier Oper OEM Division, falling under NAICS code 332618. Interested parties must respond by September 21, 2026, to provide the physical wire rope assemblies as specified in the procurement documentation.

Other Fabricated Wire Product Manufacturing

POSTED

about 5 hours ago

DEADLINE

Supply of Check Valves (NSN 4820010777729)This subcontract involves the supply of two check valves, identified by NSN 4820010777729 and Honeywell part numbers 3056643-6 or 331173, for prime contractors supporting DLA Aviation. The items are to be delivered to DLA Distribution San Joaquin in Tracy, California. The contractor must ensure all products meet strict quality and regulatory standards, including sampling per MIL-STD-1916 or ASQ H1331 and packaging and marking compliance with MIL-STD-2073-1E and MIL-STD-129. Additionally, the agreement requires full adherence to the Buy American Act as specified in DFARS 252.225-7001.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

about 5 hours ago

DEADLINE

Supply of Barrel Nuts (NSN 5310017026942)This subcontract involves the supply of four plain barrel nuts, identified by NSN 5310017026942, for prime contractors working on ASC Supplier Oper OEM Division projects under the Department of Defense. The contractor is responsible for manufacturing or sourcing the parts to ensure they conform to the specific NSN requirements. Strict adherence to military standards is required, including packaging per MIL-STD-2073-1E, marking per MIL-STD-129, and palletization according to RP001. The place of performance is located in Tracy, California, and the solicitation is categorized under NAICS code 332722.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 5 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 650+ contractors already using CLEATUS