Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

First Article Testing (FAT) Services

Open

Federal

Response Deadline11/19/2026, 12:00:00 PM EST

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for the Department of Defense involves providing First Article Testing services for prime contractors to validate mortar plungers. The scope of work requires verifying that initial production units meet the specifications of MIL-DTL-16232 Rev G, specifically focusing on material strength and tolerances through the use of specialized testing facilities. The final deliverable for this engagement is a comprehensive FAT Certification report. The project is managed by the DDSP New Cumberland Facility and will be performed in New Cumberland, Pennsylvania. To be eligible, the provider must maintain ITAR compliance and obtain PCO approval for the testing facility used. Interested parties should note the response deadline of November 19, 2026, and the classification of the work under NAICS code 541380.

General Info

DoD subcontract for mortar plunger First Article Testing and certification in Pennsylvania.

Agency

Department Of Defense → DDSP NEW CUMBERLAND FACILITY

NAICS

541380 - Testing Laboratories and Services

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7L7-27-T-0578.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

PLUNGER, MORTAR

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 8

subcontract

Response DeadlineNov 19

Submission deadline

Response Deadline

11/19/2026, 12:00:00 PM ESTin 11 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DDSP NEW CUMBERLAND FACILITY

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DDSP NEW CUMBERLAND FACILITY

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs First Article Testing (FAT) for prime contractors on Department of Defense projects to validate mortar plungers. Verifies initial production units against MIL-DTL-16232 Rev G using specialized testing facilities for tolerances and material strength. Requires ITAR compliance and PCO approval of the testing facility. Delivers the FAT Certification report.

Similar Contracts

Same NAICS industry code

First Article Testing and ValidationThis subcontract for First Article Testing and Validation supports prime contractors on DLA Weapons Support Land Supply Chain projects. The selected provider will perform validation testing on five initial units to ensure the manufacturing process aligns with the Technical Data Package and established quality standards. Work involves using precision testing equipment and metrology to verify material properties and dimensions, and must be conducted within a certified testing facility located in New Cumberland. The primary deliverables for this engagement are five validated units and a formal First Article Test Report. This opportunity falls under NAICS code 541380 and is managed by the Department of Defense. Interested parties must adhere to the response deadline of November 19, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 2 hours ago

DEADLINE

First Article Test (FAT) Execution

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 2 hours ago

DEADLINE

First Article and Production Lot Testing (PLT)This subcontract, issued by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div, focuses on providing critical quality assurance testing for prime contractors fulfilling DLA supply contracts. The scope of work involves executing First Article Testing to validate initial production runs and Production Lot Testing to maintain batch consistency. All activities must align with the Technical Requirements Package and the DLA Master List of Technical and Quality Requirements, utilizing specialized facilities to verify material and structural integrity. The contractor is responsible for delivering formal test reports and CDRL Form DD 1423 to document compliance. This opportunity is categorized under NAICS code 541380, with the place of performance located in Phoenix, Arizona. Interested parties must adhere to the response deadline of November 16, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 2 hours ago

DEADLINE

Quality Assurance & Inspection ServicesThis subcontract for Quality Assurance and Inspection Services involves the independent verification and sampling of manufactured levers for prime contractors fulfilling DLA supply contracts. The scope of work requires the inspection of critical, major, and minor attributes utilizing coordinate measuring machines, calipers, and precision gauging. All activities must be performed in accordance with DLA Master List requirements and standards MIL-STD-1916 or ASQ H1331, culminating in the delivery of certification of conformance and detailed inspection reports. The project is managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div, with the place of performance located at Hill AFB. Classified under NAICS code 541380, the solicitation was posted on November 8, 2026, with a response deadline of November 16, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 2 hours ago

DEADLINE

First Article and Production Lot Testing (FAT/PLT)This subcontract involves providing technical testing services for prime contractors supporting DLA Weapons Support Land projects. The scope of work focuses on conducting First Article Testing on two units followed by Production Lot Testing to ensure quality conformance with the Technical Data Package. The successful contractor is responsible for delivering a First Article Test Report and validated results from the production lot testing. The project is managed under the Department of Defense and requires strict adherence to ITAR and EAR compliance, as well as JCP certification for necessary data access. Performance will take place in New Cumberland, Pennsylvania. Interested parties must respond by November 19, 2026, under NAICS code 541380.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 2 hours ago

DEADLINE

First Article Test (FAT) ExecutionThis subcontract involves the execution of First Article Testing for prime contractors supporting DLA Weapons Support Maritime Hardware projects. The primary objective is to validate the design and manufacturing processes for 1.5 inch stainless steel valves in accordance with FAR 52.209-3 or 52.209-4. The successful contractor will be responsible for delivering a validated test unit and a formal FAT report to the Department of Defense at the New Cumberland facility. To be eligible for this engagement, providers must hold JCP certification to access export-controlled technical data and maintain CMMC Level 2 compliance. The opportunity was posted on November 8, 2026, with a response deadline of November 19, 2026. The work falls under NAICS code 541380 and is managed through the DDSP New Cumberland Facility.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 2 hours ago

DEADLINE

First Article Test (FAT) Evaluation and CertificationThis subcontract, titled First Article Test (FAT) Evaluation and Certification, involves performing critical testing for prime contractors on Defense Logistics Agency projects. The primary objective is to validate the design and manufacturing processes of frequency converters using specialized electronic testing and measurement equipment to ensure conversion accuracy. The selected provider will coordinate directly with the Engineering Support Activity for acceptability evaluations and is required to deliver a comprehensive FAT Report along with a certified first article sample. Managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div, the work is designated under NAICS code 541380. Performance of the contract will take place at Robins Air Force Base. Interested parties should note the response deadline of November 16, 2026, for this specific procurement effort.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 2 hours ago

DEADLINE

First Article Test (FAT) and Validation ServicesThis subcontract for First Article Test (FAT) and Validation Services supports the DLA Weapons Support Fluid Handling Division at Tinker AFB. The selected provider will perform critical testing for prime contractors to validate manufacturing processes, specifically executing protocols for dimensional inspection, material verification, and Class 3 thread compliance. These tasks must be completed using high-precision gauging or CMM equipment within a facility that maintains ISO 9001 or SAE AS9003 compliance. The primary deliverables for this engagement include a comprehensive FAT Certification report and one validated first-article unit. This opportunity is designated as a Women-Owned Small Business set-aside under NAICS code 541380. Interested parties must adhere to the response deadline of November 19, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 2 hours ago

DEADLINE

Third-Party Quality Inspection and CertificationThis subcontract for Third-Party Quality Inspection and Certification supports the DLA Weapons Support ASC Commodities Division. The selected provider will perform independent inspection and point-of-origin sampling for prime contractors to verify that dimensions and materials comply with NAS1149 Revision 8. All work must be conducted using calibrated precision measurement tools and follow MIL-STD-1916 or ASQ H1331 sampling plans, with final deliverables consisting of detailed inspection reports and Certificates of Conformance. To be eligible, the contractor must hold ISO 9001 or AS9100 accreditation. The performance of these services is located in New Cumberland, Pennsylvania. Interested parties must respond by November 16, 2026, under NAICS code 541380.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

Quality Assurance and Technical Certification for Safety ValvesThis subcontract, issued by the Department of Defense through DLA DIST SAN JOAQUIN, focuses on providing quality assurance and technical certification for safety valves. The selected contractor will perform technical inspections and quality certifications for prime contractors to ensure that valve specifications align with NSN 4820-01-673-7805. Key responsibilities include conducting pressure testing using calibrated rigs in accordance with the DLA Master List of Technical and Quality Requirements and delivering final quality inspection reports and Certificates of Conformance. The work is designated under NAICS code 541380 and will be performed in Tracy, California. Interested parties should note the posting date of November 8, 2026, with a response deadline set for November 19, 2026.

DLA DIST SAN JOAQUIN

POSTED

about 2 hours ago

DEADLINE

First Article Test (FAT) Laboratory ServicesThis subcontract for First Article Test Laboratory Services supports prime contractors on DLA Weapons Support ASC projects. The selected provider will perform destructive and non-destructive testing on three sample washers to ensure dimensions and material properties align with DLA Master List requirements. All work must be conducted using laboratory-grade measurement and test equipment in New Cumberland. To qualify, the provider must maintain ISO/IEC 17025 accreditation or demonstrate compliance with ISO 9001/AS9003 standards. The primary deliverables for this engagement include a comprehensive FAT Test Report and a formal certification of compliance. The solicitation was posted on November 8, 2026, with a response deadline of November 16, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

Production Lot Testing (PLT) SupportThis subcontract opportunity is for Production Lot Testing support benefiting the Department of Defense under the DLA Weapons Support Electrical Devices Division. The selected contractor will be responsible for coordinating production lot testing for prime contractors, which includes selecting random samples for Government Quality Assurance Representative review, preparing comprehensive test data packages with material certifications and inspection sheets, and managing traceable shipping to the Redstone Technical Test Center. The final deliverable consists of five validated test samples along with all necessary supporting documentation. The project is designated as a Total Small Business Set-Aside under NAICS code 541380, with the place of performance located in New Cumberland, Pennsylvania. Interested parties must respond by November 19, 2026, to be considered for this specialized quality assurance and logistics coordination role.

DLA WEAPONS SUPPORT ELECTRICAL DEVICES DIV

POSTED

about 2 hours ago

DEADLINE

More opportunities from Department Of Defense → DDSP NEW CUMBERLAND FACILITY

Same awarding agency

Gate Valve Manufacturing and Supply

Industrial Valve Manufacturing

POSTED

about 2 hours ago

DEADLINE

Supply of Thales Battery Chargers (NSN 6130-01-487-1154)This subcontract involves the procurement of 14 Thales Defense and Security Inc battery chargers, part number MA6751 and NSN 6130-01-487-1154, to support prime contractors on DLA Weapons Support projects. The contract is designated as a Total Small Business Set-Aside under NAICS code 335910 and requires strict adherence to the Buy American Act. All hardware must be delivered to the DDSP New Cumberland Facility in New Cumberland, Pennsylvania. The supplier is required to follow MIL-STD-2073-1E and MIL-STD-129 for packaging and marking, while utilizing MIL-STD-1916 or ASQ H1331 sampling plans for inspection and quality assurance.

Battery Manufacturing

POSTED

about 2 hours ago

DEADLINE

Supply of Temperature Regulating ValvesThis subcontract involves the manufacture or sourcing of five temperature regulating valves for prime contractors supporting the Defense Logistics Agency. The valves must strictly adhere to technical data specifications for NSN 011420257 and FSC 4820. All deliverables must be packaged and marked according to MIL-STD-2073-1E and MIL-STD-129 standards, respectively. The contractor is required to maintain full compliance with the Buy American Act and adhere to all restrictions regarding mercury and ozone-depleting chemicals. Final delivery of the units is to be made to the DLA Distribution DDSP New Cumberland Facility in New Cumberland, Pennsylvania.

Industrial Valve Manufacturing

POSTED

about 2 hours ago

DEADLINE

Critical Grade Stainless Steel SupplyThis subcontract, titled Critical Grade Stainless Steel Supply, involves the provision of certified high-grade stainless steel raw materials for prime contractors working on DLA Weapons Support Maritime Hardware projects. The scope of work specifically focuses on sourcing materials for critical-application socket weld valve bodies, ensuring all supplies comply with the Buy American and Balance of Payments Program. To maintain quality and safety standards, the provider must deliver certified stainless steel stock accompanied by Mill Test Reports and Safety Data Sheets. Managed by the Department of Defense through the DDSP New Cumberland Facility, the contract falls under NAICS code 331210. The place of performance is located in New Cumberland, Pennsylvania. Interested parties should note that the solicitation was posted on November 8, 2026, with a response deadline of November 19, 2026.

Iron and Steel Pipe and Tube Manufacturing from Purchased Steel

POSTED

about 2 hours ago

DEADLINE

Stainless Steel Stop-Check Valve FabricationThis subcontract involves the fabrication of high-precision, critical-application in-line stop-check valves for prime contractors supporting DLA Weapons Support Maritime Hardware projects. The scope of work requires the production of 1.500 inch stainless steel valves featuring backseats and socket weld ends, with the final delivery of completed and warranted products. The project is managed by the Department of Defense through the DDSP New Cumberland Facility. To be eligible, manufacturers must hold SAE AS9003 or ISO 9001 certification and maintain US/Canada Joint Certification Program approval to handle ITAR/EAR data. The response deadline for this opportunity is November 19, 2026.

Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 2 hours ago

DEADLINE

Supply of Eyepiece Assembly, OThis subcontract involves the manufacture or procurement of five Eyepiece Assembly, O units, identified by NSN 6650015828617, for prime contractors delivering to DLA Weapons Support. The selected provider must ensure all assemblies meet strict technical data specifications and coordinate the shipment of goods through the First Destination Transportation program. Managed by the Department of Defense via the DDSP New Cumberland Facility, the contract requires the provider to possess a valid CAGE code and UEI. The performance of the contract will take place in New Cumberland, Pennsylvania, under NAICS code 332510. Responses to the solicitation are due by November 19, 2026.

Hardware Manufacturing

POSTED

about 2 hours ago

DEADLINE

FOB Destination Freight TransportThis subcontract involves the physical transport of four palletized storage racks for prime contractors supporting DLA supply contracts. The selected carrier will haul the units from the point of origin to the DLA Distribution DDSP New Cumberland Facility in New Cumberland, Pennsylvania, utilizing either flatbed or dry van trucks equipped with lift-gates. All operations must be conducted in strict compliance with First Destination Transportation program guidelines and meet all standard commercial carrier insurance requirements. The project falls under NAICS code 484220 and is managed through the Department of Defense for the DDSP New Cumberland Facility.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 2 hours ago

DEADLINE

Military-Grade Packaging and Palletization ServicesThis subcontract for Military-Grade Packaging and Palletization Services supports prime contractors on DLA supply contracts through the Department of Defense at the New Cumberland facility. The scope of work involves providing specialized packaging, crating, and labeling for four packaged and palletized racks. All services must strictly adhere to military and industry standards, specifically utilizing ASTM D3951 compliant materials and applying shipping labels in accordance with MIL-STD-129. Shipments must be palletized following the RP001 DLA Packaging Requirements for Procurement guidelines. The opportunity is categorized under NAICS code 488510, with a response deadline set for November 19, 2026. Performance of these services will take place in New Cumberland, Pennsylvania.

Freight Transportation Arrangement

POSTED

about 2 hours ago

DEADLINE

Small Arms Storage Rack Fabrication and SupplyThis subcontract involves the fabrication and supply of four small arms storage racks for prime contractors supporting the Department of Defense at the DDSP New Cumberland Facility. The manufacturer is required to produce the racks in strict accordance with NSN 1095-01-550-8020 and the DLA Master List of Technical and Quality Requirements RA001, utilizing industrial metal fabrication, welding, and powder coating processes. The contract mandates strict adherence to the Buy American Act, the Berry Amendment, and Category I munitions list demilitarization protocols. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 337215, with a response deadline set for November 19, 2026.

Showcase, Partition, Shelving, and Locker Manufacturing

POSTED

about 2 hours ago

DEADLINE

Thermal Insulation Block SupplierThis subcontract involves the manufacture or sourcing of 13 thermal insulation blocks meeting NSN 5640013684621 for prime contractors supporting DLA Troop Support supply contracts. The supplier is responsible for providing a Certificate of Quality Compliance and completing necessary Contract Data Requirements Lists, specifically DD Form 1423s, while adhering to First Destination Transportation program requirements. Managed by the Department of Defense through the DDSP New Cumberland Facility, the contract falls under NAICS code 326130. Performance will take place in New Cumberland, Pennsylvania, with a response deadline set for November 19, 2026.

Laminated Plastics Plate, Sheet (except Packaging), and Shape Manufacturing

POSTED

about 2 hours ago

DEADLINE

Supply of Check Valves (NSN 4820-01-0157476)This subcontract involves the manufacture or distribution of 46 check valves under NSN 4820-01-0157476 for prime contractors supporting the Department of Defense at the DDSP New Cumberland Facility. All supplied units must be of domestic origin and delivered FOB Origin. The contractor is required to adhere to strict military standards for preparation, including packaging per MIL-STD-2073-1E, marking per MIL-STD-129, and palletization according to RP001 DLA Packaging Requirements. The performance of this contract is centered in New Cumberland, Pennsylvania.

Hardware Manufacturing

POSTED

about 2 hours ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Independent Material Verification and Quality Assurance

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

First Article Testing and Certification Services

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 2 hours ago

DEADLINE

First Article Testing (FAT) and Certification Services

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

Ballistic Quality Assurance and Lot Testing

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 2 hours ago

DEADLINE

First Article Testing (FAT) for Weapon Components

Defense Logistics Agency

POSTED

about 2 hours ago

DEADLINE

Critical Safety Item (CSI) Inspection and Certification

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 2 hours ago

DEADLINE

First Article Testing (FAT) for Indicating Thermometers

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

Ballistic Testing and Validation (PLT)

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 2 hours ago

DEADLINE

First Article Testing (FAT) and Quality Validation

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

Dimensional Inspection and Quality Certification for Critical Fasteners

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

Critical Application Testing and Inspection Services

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

First Article Testing (FAT) and Quality Validation Services

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 2 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS