Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

First Article Testing (FAT) Services

Active

Federal

Response Deadline07/27/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the performance of First Article Testing for nonmetallic hose assemblies, encompassing dimensional verification, material characterization, and performance evaluation to ensure compliance with government specifications. The testing must result in formal documentation that supports formal acceptance by the Department of Defense at Hill Air Force Base, Utah, though the physical work is to be conducted at Tracy, California, with a zip code of 95304-5000. The scope is strictly focused on validating the initial production units to confirm that all requirements are met before full-scale manufacturing proceeds. This is classified as a subcontract under NAICS code 541380, indicating specialized scientific and technical services, and is managed by the Fluid Handling Division under the broader Department of Defense. The solicitation was posted on July 16, 2026, with a deadline for responses set for July 27, 2026, and no set-aside provisions are specified, meaning all eligible contractors may compete.

General Info

First Article Testing for nonmetallic hose assemblies to meet DoD specs at Tracy, CA, for Hill AFB acceptance.

Agency

Department Of Defense → FLUID HANDLING DIVISIONView Agency

NAICS

541380 - Testing Laboratories and ServicesView NAICS

Place of Performance

TRACY, CA, 95304-5000, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 16

subcontract

Response DeadlineJul 27

Submission deadline

Response Deadline

07/27/2026, 05:00:00 PM UTCin 9 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → FLUID HANDLING DIVISION

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → FLUID HANDLING DIVISION

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Perform First Article Testing for nonmetallic hose assembly including dimensional, material, and performance testing with formal reporting to support government acceptance at Hill AFB, UT.

Similar Contracts

Same NAICS industry code

Retro-Commissioning, TAB, Controls, and Regulatory Support IDIQThis five-year contract supports the Port of Seattle’s Aviation Facilities and Infrastructure division through retro-commissioning, Test/Adjust/Balance, and controls assistance to optimize the performance of critical building systems including HVAC, plumbing, and lighting. The goal is to identify and correct operational inefficiencies, improve occupant comfort, extend equipment lifespan, and ensure compliance with safety and regulatory standards. Work will be executed via service directives and requires close collaboration with AV/F&I to deliver measurable improvements in system functionality and energy efficiency. The consultant will provide ongoing technical support to maintain and enhance system performance across the airport’s infrastructure. The contract is classified under NAICS code 541380 and is managed by the Port of Seattle, with primary point of contact Jason Gates and project manager Jim Farris available for coordination. All work will be conducted at the airport facilities, though specific locations are not detailed. This is a forecasted contract with no solicitation number yet issued, suggesting it is in the planning stage for future competitive acquisition. The scope emphasizes continuous improvement, system reliability, and regulatory adherence through proactive commissioning and controls integration.

Aviation Facilities & Infrastructure

POSTED

DEADLINE

NOTICE OF PUBLIC SOLICITATION ANNOUNCEMENTAustin Community College District is seeking qualified firms to provide geotechnical and construction materials testing engineering services through a public solicitation, identified as RFQ No. 925-26-281-00-S-AB-RFQ. Responses must be submitted electronically by Friday, August 7, 2026, at 12:00 p.m. Central Standard Time, with no paper submissions accepted unless explicitly permitted. Solicitation documents are accessible via the ACC Procure to Pay website or the designated procurement portal, and interested parties who encounter access issues are directed to contact the sole point of contact, Anthony Barron, at anthony.barron@austincc.edu or (512) 223-1039. An optional solicitation conference will be held on July 28, 2026, at 10:30 a.m. CST via Zoom to provide clarification and answer questions. The contract is under the jurisdiction of the Texas-based college district, with all performance expected to occur within the state. Key administrative contacts include Anthony Barron as the primary buyer, Janet Nicholson as the Manager of Procurement and Small Business Development, and Angela Hodge as the Vice Chancellor of Business Services, with additional support available through the general P2P email channel. Note that ACC offices will be closed on September 7, 2026, in observance of Labor Day.

AUSTIN COMMUNITY COLLEGE ACC

POSTED

about 9 hours ago

DEADLINE

Product Verification Testing ServicesThe contract seeks a small business to provide product verification testing services for military-grade products when requested by the contracting officer, focusing on sample testing and comprehensive reporting that aligns with established military standards. This subcontract is part of a total small business set-aside under SBA guidelines, specifically reserved for small businesses as defined by the FAR, with the NAICS code 541380 indicating it falls under other scientific and technical consulting services. Performance is expected to occur at Hill Air Force Base, Utah, with a zip code of 84056-5734, while the contract was posted on July 17, 2026, and requires responses by July 22, 2026. The work is governed by the Department of Defense through the Maritime Supply Chain office, indicating its importance to defense logistics and procurement integrity. The scope centers entirely on verification testing activities, requiring strict adherence to military protocols for sample selection, execution, documentation, and delivery of test results. There are no specific point of contact details listed, and the solicitation is accessible through the DIBBS platform, suggesting the process is fully digital and compliant with federal acquisition standards for subcontracting opportunities.

MARITIME SUPPLY CHAIN

POSTED

about 15 hours ago

DEADLINE

First Article Testing (FAT) ServicesThe contract seeks specialized First Article Testing services for a military duct assembly, requiring full compliance with Department of Defense standards, including the proper execution of tests and submission of documentation such as DD Form 250. The work must be performed by a qualified small business as this is a Total Small Business Set-Aside under FAR 19.5, classified under NAICS code 541380 for other scientific and technical consulting services. All testing activities must align with military specifications and deliverables to ensure the duct assembly meets required performance, safety, and quality benchmarks before production. The solicitation, issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV, has a response deadline of July 29, 2026, and is accessible via the DIBBS platform. The place of performance and physical address details are unspecified, indicating flexibility in location, but the work must be completed in accordance with federal contract requirements. The contract structure is a subcontract, meaning the selected vendor will likely work under a prime contractor to supply certified test results and documentation critical to the military supply chain.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 15 hours ago

DEADLINE

Quality Certification and Mill Testing ServicesThe contract requires independent metallurgical testing and certification of brass sheets to confirm compliance with Alloy 464 and MIL-C-3993C specifications, ensuring material integrity and adherence to military standards. Each shipment must be accompanied by a Certificate of Quality Compliance, issued upon successful verification of chemical composition, mechanical properties, and dimensional conformity. The work is to be performed as a subcontract under the NAICS code 541380, with performance location specified at NEW CUMBERLAND, PA, 17070-5002. The solicitation was posted on July 17, 2026, and responses are due by July 24, 2026. The contracting entity is the DDSP NEW CUMBERLAND FACILITY under the Department of Defense, indicating this effort supports defense-related manufacturing and supply chain requirements.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 15 hours ago

DEADLINE

First Article Testing and Certification ServicesThe contract solicits independent testing and certification services for the first article unit, requiring comprehensive dimensional inspection, material verification, and nondestructive testing in compliance with ASTM-E1417 standards. The work must be performed to.validate conformance to technical specifications prior to formal acceptance, with all findings and documentation submitted to Hill Air Force Base. This subcontract is categorized under NAICS code 541380, indicating it falls within the scientific and technical consulting services sector, and is issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. The solicitation was posted on July 17, 2026, with a response deadline of July 24, 2026, requiring proposers to submit their offerings within this seven-day window. Performance is expected to be conducted in accordance with federal contracting requirements, though the specific place of performance and point of contact details are not provided.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 15 hours ago

DEADLINE

First Article Testing (FAT) ServicesThe contract requires independent environmental, performance, and durability testing of five electric lantern units to meet the exacting standards outlined in Table II of MIL-F-16377/53C, with an absolute requirement of zero non-conformances across all test parameters. This first article testing (FAT) is a critical quality assurance step to validate that the lantern units fully comply with military specifications before any production or procurement proceeds. Testing must be conducted by a qualified third party and result in formal, detailed reporting that documents all procedures, conditions, measurements, and outcomes to demonstrate adherence to the standard. The solicitation is issued under the NAICS code 541380 for other scientific and technical consulting services and is structured as a subcontract within the Department of Defense’s Construction & Equipment MRO Svc I framework. Proposals must be submitted by July 24, 2026, with the opportunity posted on July 17, 2026, leaving a narrow seven-day window for qualified vendors to respond. There is no specified set-aside type, meaning any eligible entity may bid, and the place of performance is not defined, suggesting testing may occur at the contractor’s accredited facility. The deliverable is not just completion of tests but a comprehensive, auditable formal report that conclusively proves zero deviations from requirements.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 15 hours ago

DEADLINE

Quality Inspection and Testing ServicesThe contract requires the provision of comprehensive quality inspection and testing services to ensure adherence to government-mandated standards, including MIL-STD-1916 and FAR 52.246-2, covering in-process and final inspections, sample testing, and the maintenance of accurate quality documentation. Source inspections at the origin of materials and components are mandatory, ensuring that all products meet required specifications before they enter the supply chain. The work must align fully with Department of Defense quality assurance protocols, emphasizing continuous compliance and rigorous documentation throughout all phases of inspection and testing activities. This is a subcontract opportunity under NAICS code 541380, issued by the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense. The solicitation was posted on July 17, 2026, with a response deadline of August 19, 2026. The performance location is not specified, and no set-aside provisions are indicated, meaning the contract is open to all eligible subcontractors capable of meeting the technical and regulatory requirements. All work must be conducted in full compliance with federal acquisition regulations and military standards, with accountability and traceability central to the obligations of the contractor.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 15 hours ago

DEADLINE

in about 1 month

CLIA & CAP Laboratory Proficiency Testing and Accreditation Support ServicesThe contract calls for comprehensive proficiency testing and accreditation support services tailored to meet CLIA and CAP standards at the Phoenix Indian Medical Center, ensuring the laboratory maintains the highest levels of diagnostic accuracy and regulatory compliance. Services include the provision of CLIA-compliant proficiency testing specimens, management of testing cycles, evaluation of laboratory results, and generation of detailed performance reports to support continuous quality improvement. The contractor will also provide direct assistance in achieving and sustaining CAP accreditation, integrating guidance and documentation aligned with CLIA, CMS, CAP, and The Joint Commission requirements to ensure seamless regulatory adherence. This subcontract is exclusively available to Indian Small Business Economic Enterprises, as designated by the ISBEE set-aside, and is issued under NAICS Code 541380 for other scientific and technical consulting services. The solicitation, posted on July 17, 2026, with a response deadline of July 22, 2026, is managed by the Phoenix Area Indian Health Service under the Department of Health and Human Services, with performance centered in Phoenix. The focus is on delivering specialized laboratory support services that uphold cultural, regulatory, and operational standards critical to the federally funded healthcare facility.

Phoenix Area Indian Health Svc

POSTED

about 20 hours ago

DEADLINE

RMRS FIA Genetic Tree Sampling

Csa Intermountain 1 Usda-Fs

POSTED

about 20 hours ago

DEADLINE

H146--SPS Water Sampling and Testing at the Hines VA Hospital in Hines, ILThe contract pertains to water testing services at the Hines VA Hospital in Hines, Illinois, conducted in accordance with AAMI ST108 standards. The scope includes on-site sampling and laboratory analysis for multiple water quality parameters such as pH, alkalinity, bacteria, endotoxin levels using the LAL method, total organic carbon, ionic contaminants, conductivity, and hardness. The solicitation is designated as a Service-Disabled Veteran-Owned Small Business Set Aside under NAICS code 541380, indicating it is reserved for eligible small businesses owned by service-disabled veterans. The solicitation number is 36C25226Q0527, posted on July 17, 2026, with proposals due by July 22, 2026. The procuring office is the 252-NETWORK Contract Office 12 based in Milwaukee, Wisconsin, and primary point of contact is Jessica Hansen, reachable via email and phone. The place of performance is clearly identified as Hines, Illinois, with a ZIP code of 60141. Although the contract description specifies the required testing parameters and on-site sampling, critical details including the period of performance, pricing structure, evaluation criteria, clauses, inspection and acceptance standards, packaging requirements, and specific deliverables are not provided in the available documentation. No attachments, representations, certifications, or administrative data such as invoicing procedures or contracting officer representative information are included in the published metadata. The estimated contract value is not disclosed, and no information regarding award basis, cost data, or CLINs is available.

252-NETWORK Contract Office 12 (36C252)

POSTED

about 20 hours ago

DEADLINE

Materials Compatibility Test and Evaluation Services in support of Piston Aviation Fuels Initiative (PAFI) and Eliminate Aviation Gasoline Lead Emissions (EAGLE) programsThe Federal Aviation Administration is seeking qualified contractors to provide materials compatibility laboratory testing and evaluation services in support of the Piston Aviation Fuels Initiative and Eliminate Aviation Gasoline Lead Emissions programs, with the work to be performed at locations within the Continental United States under a 36-month period of performance extending from July 1, 2026, to June 30, 2028. The solicitation, designated 697DCK-26-R-00186, is open to the full and open market under NAICS code 541380 with a size standard of $19.0 million, and anticipates awarding a hybrid contract combining Firm Fixed Price for non-severable testing services and Labor Hours for severable research services. Proposals must include a Technical Proposal and a Business Proposal, addressing mandatory pass/fail gates: at least three relevant projects completed in the past five years, two independently submitted Customer Satisfaction Surveys rated Satisfactory or higher, and complete pricing for all Contract Line Item Numbers as outlined in the Pricing Template. The solicitation incorporates by reference numerous AMS clauses governing organizational conflicts of interest, illegal activity recovery, order of precedence, subcontractor responsibilities, payment procedures, and termination rights, with all terms subject to the Acquisition Management System rather than the FAR. The Materials Test Matrix, defined in the Statement of Work, dictates required testing protocols for fuel-wetted metallic and non-metallic materials, distribution hoses, linings, filters, and specific test rigs such as RTP-004 and RTP-005, with samples subject to hazardous materials regulations and fuel stored only in FAA-approved sealed containers. All deliverables, including draft and final reports, must be submitted electronically in specified formats within strict timelines—drafts within 30 days of testing completion and final versions within 20 days of FAA comments—and must be properly marked with contract number, contractor details, and delivery status. The Government will award a single contract based on the Lowest Priced, Technically Acceptable method, and failure to submit any required documentation, including SAM registration with a valid UEI, past performance surveys, or properly completed pricing sheets, will result in rejection. Proposals must be submitted by the final deadline of July 31, 2026, at 1500 hrs ET, with all amendments posted publicly and offerors responsible for monitoring updates. The Contracting Officer, Richard Palsgrove, holds sole

697DCK Regional Acquisitions Svcs

POSTED

about 20 hours ago

DEADLINE

More opportunities from Department Of Defense → FLUID HANDLING DIVISION

Same awarding agency

MOTOR, ALTERNATING CURR

Motor and Generator Manufacturing

POSTED

about 15 hours ago

DEADLINE

PLATE, ORIFICE, FLUIDThe contract is for the procurement of one fluid orifice plate, identified by NSN 4730-01-686-7144, under solicitation SPE7M3-26-T-7152, with a proposed delivery date 20 days after award and a deadline for response on July 22, 2026. The item is to be delivered to the Naval Sea Systems Command warehouse in Mechanicsburg, Pennsylvania, under FOB Origin terms. The procurement is governed by the DLA Master List of Technical and Quality Requirements, which supersedes general commercial packaging standards like ASTM D3951, and requires full compliance with MIL-STD-129 for marking, labeling, and barcoding of shipments, including proper identification of hazardous materials under OSHA’s Hazard Communication Standard. Export control is a critical component, as the technical data associated with this item is subject to ITAR or EAR, requiring prior authorization for any disclosure to foreign persons, and only contractors certified under the US/Canada Joint Certification Program, who have completed mandatory DLA training and approval processes, may access the controlled information, in accordance with DFARS 252.225-7048. The contract includes a suite of FAR and DFARS clauses addressing small business representation, employment eligibility, combating trafficking, sustainable products, cybersecurity safeguards, and transportation regulations, many of which are applied with deviations under DEVIATION 2026-00038 or similar, and requires electronic invoicing exclusively through WAWF. Pricing data is not provided, and the contract type is unspecified, though the solicitation is categorized as a simplified acquisition. The contractor must also comply with special labeling requirements for any hazardous materials, submit pre-award label and MSDS documentation if applicable, and ensure ongoing updates to hazardous material disclosures throughout performance. All proposals must be submitted electronically via DIBBS by the stated deadline, and offerors must represent their size status and socioeconomic certifications, including any joint venture arrangements, while also disclosing if they provide covered defense telecommunications equipment or services under 252.204-7016 and 7017. Inspection and acceptance will occur at the destination by the government, with no provision for contractor inspection. The contract includes no evaluation factors, weights, or basis of award information, and no attachments are identified.

Plastics Pipe and Pipe Fitting Manufacturing

POSTED

about 15 hours ago

DEADLINE

DISK, VALVEThe contract pertains to the procurement of three DISK, VALVE units identified by NSN 4820-01-304-4960 under solicitation number SPE7M4-26-T-234L. This federal procurement is managed by the Defense Logistics Agency under the Department of Defense and was posted on July 6, 2026, with a response deadline of July 17, 2026. The solicitation is open to all eligible contractors without any specific set-aside classification. The place of performance and office address information are not specified, but the procurement is conducted under U.S. federal jurisdiction. Interested parties must submit responses through the designated DIBBS platform via the provided UI link before the deadline to be considered for award.

Industrial Valve Manufacturing

POSTED

about 15 hours ago

DEADLINE

MANIFOLD, HYDRAULICThe contract pertains to the procurement of a hydraulic manifold system accessory identified by NSN 4730-01-707-1733 and part number 201330780-10, with a quantity of 43 units required for delivery within 136 days after order. Technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation or award date depending on acquisition size. The item is subject to stringent packaging standards per DLA requirements and includes tailored higher-level quality controls for both manufacturers and non-manufacturers. Inspection and acceptance must occur at the manufacturer’s origin, and any non-accepted supplies must have government identification removed prior to return. Export control restrictions apply due to the presence of technical data governed by ITAR or EAR, prohibiting unauthorized disclosure to foreign persons or entities, including foreign nationals within the U.S., and requiring compliance with DFARS 252.225-7048. Access to this controlled data is limited to DLA contractors certified under the US/Canada Joint Certification Program, who have completed mandatory DOD export control training and been formally approved by DLA. Cybersecurity requirements mandate CMMC Level 2 certification by a certified third-party assessment organization. The solicitation number is SPE7M3-26-T-7278, issued by the Department of Defense’s Fluid Handling Division, with responses due by July 22, 2026, and performance required at New Cumberland, Pennsylvania.

Plastics Pipe and Pipe Fitting Manufacturing

POSTED

about 15 hours ago

DEADLINE

TUBE, METALLICThe contract specifies the procurement of seamless metallic tubes made from aluminum alloy 6061 in temper T6, with dimensions of 1-1/2 inches square by 1/4 inch wall thickness and a standard length of 21 feet per unit, conforming to the ASTM B221-21 standard for extruded aluminum products. The tubes must meet strict quality and packaging requirements outlined in DLA’s Master List of Technical and Quality Requirements, including compliance with MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, with no special marking required. The use of ozone-depleting chemicals is strictly prohibited, and any alternative substances must be pre-approved unless explicitly permitted by the specification. Each unit is designated as a linear foot equivalent (LG), with a total quantity of 91.905 LG, rounded to 92 units, and no variance in quantity is permitted. Delivery is required FOB origin, with inspection and acceptance occurring at the destination, and the delivery deadline is set for 221 days from contract award, with a required ship date of February 24, 2027. Packaging must also adhere to ASTM B660 and DLA’s packaging requirements, with palletization and container specifications detailed per DLA guidelines. The item is identified by NSN 4710-01-182-2428, and the delivery address is DLA Distribution Red River in Texarkana, Texas. Full and open competition applies, with contract administration handled by the Department of Defense’s Fluid Handling Division under solicitation SPE7M4-26-T-234E, and primary point of contact is Rory O’Reilly.

Iron and Steel Pipe and Tube Manufacturing from Purchased Steel

POSTED

about 15 hours ago

DEADLINE

STRAINER, SUCTIONThe contract is for the procurement of 51 units of a suction strainer identified by NSN 4730-12-374-6394 under purchase request 1000235512, with a delivery requirement within 84 days after award. The solicitation number is SPE7M4-26-U-0379, issued on July 17, 2026, with responses due by July 22, 2026, and it is designated as a Total Small Business Set-Aside under FAR 19.5, targeting small business concerns. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions tied to the solicitation or award date depending on acquisition size. The item falls under NAICS code 333998 and is managed by the Fluid Handling Division of the Department of Defense. All supply shipments must comply with DLA packaging standards and include provisions for removal of government identification from non-accepted items. The point of contact for inquiries is Colin Brown, reachable via email and phone, and the solicitation is accessible through the DIBBS portal.

All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 15 hours ago

DEADLINE

STRAINER ELEMENT, SEDIMThe contract mandates the supply of a sediment strainer element made exclusively from Monel material, with strict adherence to technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, where compliance is governed by the revision in effect on the solicitation or award date depending on acquisition size. The item is designated as a critical application and must not contain any Class I ozone-depleting chemicals, nor intentionally incorporate mercury or mercury-containing compounds except under specific, narrowly defined exceptions for functional uses in batteries, lights, instruments, weapon systems, or NAVSEA-specified reagents. Portable devices with mercury must include shockproof construction and a secondary containment barrier per NAVSEA 5100-003D. Approved suppliers include Haywardindl. Products Inc. and Eaton Filtration LLC, both with part number ST052160P250MM, and the contract is issued under solicitation SPE7M3-26-T-7277 with a women-owned small business set-aside. Six units are required with zero variance allowed in quantity, to be delivered FOB origin within 157 days of the contract award, with inspection and acceptance occurring at the destination. Packaging must conform to MIL-STD-2073-1E and MIL-STD-129, with special marking codes indicating “Arrow Up,” “Open for Inspection or Use Only,” “Open This Side,” and “Team Lift Required.” The DLA requires reduced plastic packaging without compromising protection, and palletization must follow DLA packaging guidelines. The shipment must be addressed to DLA Distribution San Diego at 3581 Cummings Road, Building 3581, San Diego, CA 92136-3581, with the required delivery date set for December 22, 2026. The NSN is 4730-01-289-5533, and the unit of issue is each (EA). A Certificate of Conformance is authorized unless overridden by a Quality Assurance Letter of Instruction. The prime point of contact is William Cain, with additional transportation and shipping requirements governed by DLA procedural notes C19 and C20.

Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 15 hours ago

DEADLINE

Quality Assurance and Compliance Documentation ServicesThe contract requires the preparation and submission of comprehensive technical documentation to ensure full compliance with military standards, specifically focusing on traceability records, inspection reports, and certification of adherence to required specifications. This work is essential to verify the integrity and conformity of components and systems within the defense supply chain, supporting rigorous quality assurance protocols. All deliverables must be meticulously compiled, accurately documented, and submitted in a timely manner to meet the regulatory expectations of the Department of Defense. This is a subcontract under the NAICS code 541330 for Quality Assurance and Compliance Documentation Services, issued by the FLUID HANDLING DIVISION of the Department of Defense. The solicitation was posted on July 16, 2026, with a response deadline of July 27, 2026. Although no specific location is designated for performance, the work is directly tied to defense-related operations and must align with stringent federal defense requirements. Interested parties must respond by the stated deadline to be considered for award, and the contract will be managed through the DLA DIBBS portal using the reference number SPE7M326Q0170.

Engineering Services

POSTED

DEADLINE

Logistics and Transportation to DLA Distribution CenterThe contract entails the secure and compliant transportation of packaged military items to the DLA Distribution Center in New Cumberland, Pennsylvania, adhering strictly to Defense Priority Allocation System (DPAS) requirements and DLA procurement directives C19 and C20. All shipments must meet rigorous defense logistics standards, ensuring timely, tamper-proof delivery while maintaining full regulatory compliance throughout the supply chain. The contractor is responsible for end-to-end logistics execution with attention to security protocols, documentation accuracy, and adherence to military-specific handling procedures. This is a subcontract under the NAICS code 484220 for truck transportation of freight, solicited by the Fluid Handling Division of the Department of Defense. The opportunity was posted on July 16, 2026, with responses due by July 27, 2026. Performance will occur at the specified DLA Distribution Center location, and all activities must align with federal defense procurement standards. The contract requires proven experience in defense logistics, ability to navigate DPAS prioritization, and capacity to meet stringent delivery timelines without compromise to safety or compliance.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Reconditioning and Reutilization Services for Government SurplusThe contract encompasses the inspection, reconditioning, rebuild, and certification of surplus fluid handling components to meet original military specifications, ensuring they are fit for reuse or resale. All work must adhere strictly to the technical and quality standards established for government-issued equipment, with a focus on restoring functionality, reliability, and safety without compromise. The services required include thorough assessment of component integrity, replacement of worn or degraded parts, systematic reassembly, and formal certification verifying compliance with all applicable military requirements. The contract is classified as a subcontract under NAICS code 811310 and is issued by the Fluid Handling Division within the Department of Defense. It was posted on July 16, 2026, with a response deadline of July 27, 2026. While no specific location is designated for performance, all work must be executed in a manner that supports the readiness and logistical needs of the military supply chain. The solicitation is accessible through the DIBBS portal, and potential bidders are expected to demonstrate proven capability in handling military-grade fluid systems with a documented history of successful reconditioning and certification.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

DEADLINE

Specialized Hose Clamp Supply (NSN 4730-01-661-4086)The contract specifies the supply of 49 military-specification hose clamps identified by NSN 4730-01-661-4086, requiring full traceability from manufacturing through delivery, with packaging and documentation fully aligned with Defense Logistics Agency standards. All units must meet rigorous defense-grade specifications to ensure operational reliability and compliance with DoD requirements. The solicitation is issued as a subcontract under NAICS code 332994 by the Fluid Handling Division of the Department of Defense, with responses due by July 27, 2026, and the opportunity posted on July 16, 2026. The place of performance and point of contact details are not specified, but the work is expected to support military fluid handling systems, with all deliverables subject to DLA inspection and verification protocols.

Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

DEADLINE

Quality Inspection and Acceptance SupportThe contract involves providing quality inspection and acceptance support for critical, major, and minor product attributes using zero-based sampling plans aligned with MIL-STD-1916 or ASQ H1331 standards to ensure compliance with AQL requirements. Inspections must be conducted both during production and at final stages to guarantee conformance and operational reliability. The work is designated as a subcontract under NAICS code 541320 and is managed by the Fluid Handling Division of the Department of Defense, with performance required at a facility in San Diego, zip code 92136-3581. The solicitation was posted on July 16, 2026, and responses are due by July 27, 2026, with all submissions to be made through the DIBBS platform using the provided RFQ link.

Landscape Architectural Services

POSTED

DEADLINE