Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, December 9 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

First Article Testing (FAT) Services

Open

Federal

Response Deadline11/23/2026, 12:00:00 PM EST

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for First Article Testing services supports prime contractors delivering aerospace components to the Defense Logistics Agency. The scope of work involves verifying part dimensions, material properties, and overall performance against the technical data package specified in CLIN 0002. Using precision measurement tools and material analysis equipment, the contractor is responsible for generating certified test reports and delivering a validated sample to ensure DLA acceptance. The opportunity is a total small business set-aside under NAICS code 541380, managed by the Department of Defense. Performance will take place at Robins Air Force Base. Interested parties must respond by November 23, 2026, to provide the required validation and formal reporting services.

General Info

Agency

Department Of Defense → CONSTRUCTION & EQUIPMENT MANU & CON

NAICS

541380 - Testing Laboratories and Services

Place of Performance

ROBINS A F B, GA, 31098-1887, USA

Set-Aside

SBA

Documents

This scope was carved out of SPE8EF-27-T-0301.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

COVER ASSY, RAM AIR

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 12

subcontract

Response DeadlineNov 23

Submission deadline

Response Deadline

11/23/2026, 12:00:00 PM ESTin 11 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → CONSTRUCTION & EQUIPMENT MANU & CON

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → CONSTRUCTION & EQUIPMENT MANU & CON

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs First Article Testing (FAT) for prime contractors delivering DLA aerospace components. Verifies part dimensions, material properties, and performance against the technical data package as specified in CLIN 0002. Utilizes precision measurement tools and material analysis equipment to generate certified test reports required for DLA acceptance. Delivers a validated sample and a formal FAT report.

Similar Contracts

Same NAICS industry code

Third-Party Quality Assurance and Zero-Based Sampling InspectionThis subcontract involves providing third-party quality assurance and zero-based sampling inspections for prime contractors supporting DLA Weapons Support ASC projects. The selected provider will be responsible for executing sampling plans in accordance with MIL-STD-1916 or ASQ H1331 and utilizing high-precision metrology equipment to verify dimensional tolerances for matched ring sets. Key deliverables include the submission of detailed inspection reports and certifications. To qualify, contractors must hold AS9100 or ISO 9001 certification and possess specific experience with Air Force Critical Safety Item standards. This opportunity is managed by the Department of Defense under NAICS code 541380, with a response deadline set for December 14, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

in about 1 month

Third-Party Quality Assurance and CertificationThis subcontract for Third-Party Quality Assurance and Certification supports the Department of Defense, specifically the DLA Weapons Support Land Supplier Operations Vehicle Support. The selected provider will perform independent inspection and verification of pistons for prime contractors, ensuring that critical, major, and minor attributes are validated. All work must adhere to Reference QAP 19207 12344830 using MIL-STD-1916 or MIL-STD-105/ASQ Z1.4 sampling plans, with precision measurement tools calibrated to national standards. Deliverables include detailed inspection reports and signed Certificates of Conformance. The opportunity is designated as a Women-Owned Small Business set-aside under NAICS code 541380. Performance will take place in Anniston, Alabama. Interested parties must respond by November 23, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Liquid Penetrant Inspection ServicesThis subcontract for Liquid Penetrant Inspection Services supports the DLA Weapons Support Nuclear Reactor Program. The selected provider will perform 100 percent penetrant inspection for prime contractors, utilizing fluorescent penetrant inspection equipment to conduct Type 1, Method A, Sensitivity Level 2 inspections in accordance with ASTM E1417. The primary objective is to ensure that no indications exceed 0.062 inch, with the final deliverables consisting of detailed inspection reports and certifications. The project is a total small business set-aside under NAICS code 541380 and will be performed in San Diego, California. Personnel assigned to this contract must hold NDT Level II or III certification per NAS 410. Interested parties must respond by November 23, 2026.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

NDT and Quality Certification - Engine MountsThis subcontract for the Department of Defense, specifically the DLA Weapons Support ASC Supplier Oper AE and AF Div, involves providing non-destructive testing and final quality validation for engine mounts. The selected contractor will be responsible for performing magnetic particle, ultrasonic, or X-ray testing in accordance with RQ040, as well as conducting dimensional inspections using CMM. Key deliverables include the preparation of First Article Test reports and the issuance of Certificates of Quality Compliance. To be eligible, contractors must hold NADCAP NDT accreditation and maintain CMMC Level 2 certification. The project falls under NAICS code 541380. Interested parties must submit their responses by the deadline of December 14, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

in about 1 month

Metrology and Calibration ServicesThis subcontract for Metrology and Calibration Services supports Navsup Weapon Systems Support projects by providing essential calibration for precision measurement equipment used in NRP Flat Panel A033 repairs. The selected provider will be responsible for calibrating tools used for coordinate and positional dimensional data, ensuring all work is performed using NIST-traceable standards. Compliance with ANSI/NCSL Z540.3 or ISO-10012-1 requirements is mandatory, and the contractor must deliver formal calibration certificates and maintain detailed calibration logs. The opportunity is categorized under NAICS code 541380 and is issued by the Department of Defense. Interested parties must submit their responses by the deadline of December 14, 2026.

Navsup Weapon Systems Support

POSTED

about 5 hours ago

DEADLINE

in about 1 month

Geotechnical Engineering and Materials TestingThis subcontract for Geotechnical Engineering and Materials Testing supports prime contractors on facility projects for the Board of Regents of the University System of Georgia at Dalton State College. The scope of work involves performing comprehensive soil analysis and material testing, which includes conducting geotechnical evaluations through soil sampling and borings, executing material testing during the construction phase, and performing special inspections utilizing laboratory equipment and drilling rigs. The selected provider must employ a Licensed Professional Engineer to ensure technical compliance and is responsible for delivering formal geotechnical evaluation reports and material testing certifications. Interested parties should note the response deadline of December 15, 2026, for this engagement categorized under NAICS code 541380.

Board Of(university System of Georgia) Regents

POSTED

about 18 hours ago

DEADLINE

in about 1 month

Certified Welding Inspector (CWI) for Structural RepairThis subcontract opportunity is for a Certified Welding Inspector to perform structural weld inspections for prime contractors working on Pioneer Valley Transit Authority vehicle collision repair projects in Springfield, Massachusetts. The selected professional will be responsible for conducting in-process inspections to verify weld standards before finishing, utilizing specialized welding inspection tools and non-destructive testing equipment to provide technical opinions on structural integrity and weld quality. The contractor must hold a valid Certified Welding Inspector certification to qualify for the role. Key deliverables include the provision of certified weld inspection reports and formal approval of structural components. Interested parties should note the response deadline of December 11, 2026, for this specialized technical service under NAICS code 541380.

Pioneer Valley Transit Authority

POSTED

about 20 hours ago

DEADLINE

RFQ27-004 Independent Inspection Services

Solicitation # BD-26-2263-PTA01-PTVA1-135356

The Pioneer Valley Transit Authority (PVTA) is soliciting quotes under RFQ 27-004 for an independent firm to provide inspection and technical advisory services for the collision repair of a 2024 New Flyer XDE40 hybrid bus, Unit 1876. This project is associated with repairs being conducted under RFP 27-003. The scope of work requires the selected firm to perform a comprehensive series of evaluations, including baseline, teardown, in-process, pre-delivery, and final acceptance inspections. Additionally, the firm must provide a review of the repair plan, offer expert opinions on concealed damage, and ensure that structural weld inspections are performed by a Certified Welding Inspector (CWI). This solicitation, identified by number BD-26-2263-PTA01-PTVA1-135356, is categorized under NAICS code 541380. Interested parties must submit their questions by November 23, 2026, at 2:00 PM EST. Final quotes are due via email to [email hidden] no later than December 11, 2026, at 2:00 PM EST. The performance of these services is centered in Springfield, Massachusetts, with primary administrative and billing contact managed through the PVTA procurement office.

Pioneer Valley Transit Authority

POSTED

about 20 hours ago

DEADLINE

First Article Testing (FAT) and Product Verification Testing (PVT)This subcontract, issued by the DLA Weapons Support Land Supply Chain for the Department of Defense, involves specialized validation testing for mortar component projects. The selected contractor will perform First Article Testing and Product Verification Testing using specific measurement tools and rigs to ensure that tolerances and performance align with the Technical Data Package. Key deliverables include the submission of FAT reports and PVT validation results, with the requirement to provide five PVT samples from each production contractor. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 541380, with the place of performance located in New Cumberland, Pennsylvania. Interested parties must respond by November 23, 2026, to support these critical quality assurance efforts for prime contractors.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Aerospace Component Inspection and SamplingThis subcontract, issued by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div, involves specialized quality inspection and sampling for aerospace hardware. The selected contractor will perform these services at the point of origin for 11 units of fuselage fittings, utilizing MIL-STD-1916 or ASQ H1331 Table 1 zero-based sampling plans. To ensure compliance and precision, the contractor must maintain ISO 9001:2015 certification and utilize precision measurement tools, ultimately delivering detailed inspection reports and certifications of acceptance. The project is categorized under NAICS code 541380 and will be performed in San Diego, California. Interested parties must adhere to the timeline established by the posting date of November 11, 2026, with a response deadline of November 19, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

First Article Test (FAT) and ValidationThis subcontract, issued by the Department of Defense in San Diego, requires the testing and validation of one bronze gate valve to support prime contractors on DLA supply contracts. The selected provider must conduct pressure testing to verify a 100 PSI WOG rating and ensure full compliance with MIL-V-1189D standards. The scope of work includes coordinating with the Contracting Officer and Quality Assurance Representative for in-process verification. The contractor is responsible for delivering one tested unit for government evaluation along with a formal First Article Test Report, which must be submitted within 90 calendar days. This opportunity is designated as a Total Small Business Set-Aside under NAICS code 541380, with performance taking place in San Diego.

POSTED

DEADLINE

First Article Test (FAT) SpecialistThis subcontract opportunity is for a First Article Test Specialist to support prime contractors delivering DLA Troop Support Construction and Equipment contracts. The selected provider will perform testing and validation on the first production batch to ensure strict compliance with MIL-PRF-87260 and CID A-A-3174 standards. Utilizing specialized laboratory equipment, the specialist will verify critical density and compression properties, ultimately delivering a comprehensive First Article Test report and a certification of compliance. The project is associated with the Department of Defense and will be performed at the DDSP New Cumberland Facility in New Cumberland, Pennsylvania. Interested parties should note the solicitation was posted on November 11, 2026, with a response deadline of November 23, 2026. The work falls under NAICS code 541380, focusing on testing and validation services to ensure military specifications are met prior to full-scale production.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

More opportunities from Department Of Defense → CONSTRUCTION & EQUIPMENT MANU & CON

Same awarding agency

Military-Grade Packaging ServicesThis subcontract for Military-Grade Packaging Services involves providing specialized packaging and crating solutions for prime contractors on DLA supply contracts. The scope of work focuses on the design and construction of crates for pole assemblies, utilizing heavy-duty materials and cushioning to ensure secure transport. All deliverables must be fully packaged, labeled, and ready for shipment upon delivery. The contractor is required to strictly adhere to industry and military standards, including ASTM D3951, RP001, MIL-STD-129, and MIL-STD-130N for labeling and palletization. This project is managed under the Department of Defense for Construction & Equipment Manu & Con, with the place of performance located at Robins Air Force Base. The response deadline for this opportunity is November 23, 2026.

Power Boiler and Heat Exchanger Manufacturing

POSTED

DEADLINE

Assembly Hardware SupplyThis subcontract, titled Assembly Hardware Supply, involves the procurement of specialized fasteners and fittings for prime contractors supporting Department of Defense DLA supply contracts for Pole Assembly NSN 1730-01-277-1258. The scope of work requires the sourcing and delivery of kitted hardware components, including high-strength bolts, nuts, washers, or proprietary connectors. All materials must be manufactured from grade-specific stainless steel, titanium, or high-tensile steel in strict accordance with provided technical data. The contract is managed under NAICS code 332999 and is associated with Construction & Equipment Manu & Con. Performance of the contract will take place at Robins Air Force Base, zip code 31098-1887. The solicitation was posted on November 12, 2026, with a response deadline set for November 23, 2026.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

Surface Treatment and FinishingThis subcontract for Surface Treatment and Finishing involves providing protective coating and finishing services for prime contractors on DLA supply contracts. The scope of work includes sandblasting, priming, painting, and anodizing metal pole assemblies to prevent corrosion, utilizing industrial spray booths and curing ovens to deliver finished products. The project is managed under the Department of Defense and will be performed at Robins Air Force Base. Contractors must ensure strict compliance with FAR 52.223-7 regarding restrictions on the intentional addition of mercury. The solicitation was posted on November 12, 2026, with a response deadline of November 23, 2026.

Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

DEADLINE

Pole Assembly FabricationThis subcontract involves the fabrication of primary structural components for prime contractors supporting Department of Defense supply contracts. The specific scope of work focuses on the production of Pole Assembly NSN 1730-01-277-1258, requiring the cutting, bending, welding, and machining of metal tubing or plating. All work must be performed according to proprietary government technical drawings and in strict compliance with the DLA Master List of Technical and Quality Requirements. The project necessitates the use of precision welding equipment and CNC machining to deliver completed metal pole structures. Performance will take place at Robins Air Force Base. Interested parties should note the response deadline of November 23, 2026, for this opportunity categorized under NAICS code 332312.

Fabricated Structural Metal Manufacturing

POSTED

DEADLINE

Rope Termination Hardware SupplyThis subcontract involves the supply of metal end-fittings and termination hardware to support prime contractors on DLA Troop Support supply contracts. The scope of work requires the manufacture or sourcing of steel or alloy fittings, thimbles, and connectors compatible with part number 6286, ensuring all components receive the necessary corrosion-resistant surface treatments. Deliverables are specified as hardware kits designed for 10 rope assemblies. The contractor must strictly adhere to the Buy American Act and provide comprehensive material alloy certifications for all supplied hardware. Managed under the Department of Defense through Construction & Equipment Manu & Con, the performance of this contract is centered in Philadelphia. The solicitation was posted on November 12, 2026, with a response deadline of November 23, 2026, falling under NAICS code 332510.

Hardware Manufacturing

POSTED

DEADLINE

High-Performance Fiber Rope Material SupplyThis subcontract involves the manufacture and supply of high-performance raw fiber rope material for prime contractors supporting DLA Troop Support. The materials must strictly adhere to the tensile strength and diameter specifications associated with NSN 4020-01-388-5789. To ensure quality and safety compliance, the provider is required to deliver certified materials along with Mill Test Reports and Material Safety Data Sheets in accordance with 29 CFR 1910.1200. Managed under the Department of Defense and categorized under NAICS code 314994, the contract requires full compliance with the Buy American Act. Performance for this agreement is centered in Philadelphia. Interested parties must respond by November 23, 2026, to meet the requirements of the solicitation.

Rope, Cordage, Twine, Tire Cord, and Tire Fabric Mills

POSTED

DEADLINE

Fiber Rope Assembly Fabrication (P/N 6286)This subcontract involves the fabrication of ten single-leg fiber rope assemblies for prime contractors supporting DLA Troop Support supply contracts. The work must be performed in accordance with NSN 4020-01-388-5789 and P/N 6286, requiring the integration of rope with end-fittings and strict adherence to quality assurance testing as outlined in the DLA Master List of Technical and Quality Requirements RA001. The project is managed under the Department of Defense with performance taking place in Philadelphia. To be eligible, the contractor must maintain NIST SP 800-171 cybersecurity compliance. The solicitation was posted on November 12, 2026, with a response deadline of November 23, 2026.

Rope, Cordage, Twine, Tire Cord, and Tire Fabric Mills

POSTED

DEADLINE

Supply of Aircraft Wash Cover Kits (NSN 1730016995652)This HUBZone set-aside subcontract involves the manufacture or sourcing of 13 Aircraft Wash Cover Kits under NSN 1730016995652 for prime contractors supporting Department of Defense DLA supply contracts. The scope of work requires the delivery of 13 completed kits, with strict adherence to packaging standards including ASTM D3951, MIL-STD-129 for marking and labeling, and palletization requirements per RP001 and the DLA Master List of Technical and Quality Requirements. Performance will take place in New Cumberland, Pennsylvania. To be eligible, the contractor must maintain cybersecurity compliance through a CMMC Level 2 self-assessment and adhere to DFARS 252.204-7012 regulations. The solicitation was posted on November 12, 2026, with a response deadline of November 23, 2026.

All Other Miscellaneous Manufacturing

POSTED

DEADLINE

Supply of Berry Amendment Compliant Metal StockThis subcontract involves the supply of raw metal stock for prime contractors operating under DLA supply contracts. The provider is responsible for delivering steel or alloy materials that strictly adhere to the metallurgical specifications outlined in Basic Drawing NR 98750 58B46150. To ensure compliance, all materials must be domestically sourced in accordance with the Buy American Act and the Berry Amendment, with Material Test Reports provided to verify both the grade and origin of the stock. Managed under the Department of Defense and categorized under NAICS code 331210, the contract requires the delivery of certified raw metal stock to the manufacturer. The place of performance is located in Tracy, California. Interested parties should note the response deadline of November 23, 2026, for this procurement effort.

Iron and Steel Pipe and Tube Manufacturing from Purchased Steel

POSTED

DEADLINE

Manufacture of Trailer Hold-Down Clasps (NSN 1740-00-486-0550)This subcontract involves the manufacture of 71 trailer hold-down clasps under NSN 1740-00-486-0550 for prime contractors supporting Department of Defense DLA supply contracts. The hardware must be fabricated according to Basic Drawing NR 98750 58B46150, Revision C, utilizing CNC machining, stamping, or forging processes. All finished products must undergo quality sampling and inspection in compliance with MIL-STD-1916 or ASQ H1331 and be packaged according to MIL-STD-2073-1E and MIL-STD-129. The contractor is required to maintain Berry Amendment compliance and provide a CMMC Level 2 self-assessment. Performance of the contract will take place in Tracy, California. Interested parties must respond by November 23, 2026, regarding this requirement categorized under NAICS code 332312.

Fabricated Structural Metal Manufacturing

POSTED

DEADLINE

Ram Air Cover Assembly FabricationThis subcontract, issued by the Department of Defense under the agency Construction & Equipment Manu & Con, requires the manufacture and supply of two Ram Air Cover Assemblies for prime contractors. The fabrication must strictly adhere to NSN 1730008113041 and include First Article Tests to ensure manufacturing integrity. Compliance with RP001 DLA Packaging Requirements, the DLA Master List of Technical and Quality Requirements, and RQ009 Inspection and Acceptance at Origin standards is mandatory. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 336413, with the place of performance located at Robins Air Force Base. Interested parties must respond by November 23, 2026, to fulfill the delivery of these aerospace components.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

Solicitation # SPE8EF-27-T-0300

Solicitation SPE8EF-27-T-0300 is a small business set-aside procurement issued by the Defense Logistics Agency for 71 units of trailer hold-down clasps, identified by NSN 1740-00-486-0550. The items must be manufactured in accordance with Basic Drawing NR 98750 58B46150, Revision C. Delivery is required within 166 days after order, with a need ship date of May 9, 2027, and a final required delivery date of May 26, 2027. The shipment is FOB Origin and will be delivered to DLA Distribution San Joaquin in Tracy, California. The contract mandates strict adherence to technical and quality standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and specific sampling methods per MIL-STD-1916 or ASQ H1331. Inspection and acceptance will occur at the destination. Key regulatory requirements include CMMC Level 2 self-assessment, compliance with the Buy American Act and Berry Amendment, and the use of the Wide Area Workflow system for invoicing. The procurement is managed by Russell Keiser, and quotations must be submitted by November 23, 2026.

Construction Machinery Manufacturing

POSTED

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

First Article Test (FAT) Validation

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

First Article Testing and Reporting for NSN 5340-01-551-8772

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Source Inspection and Quality Certification Services

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Production Lot Testing (PLT) and First Article Testing (FAT)

DLA WEAPONS SUPPORT ELECTRICAL DEVICES DIV

POSTED

DEADLINE

Production Lot Testing (PLT) and First Article Testing

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Specialized Testing and Quality Validation for Sniper Data Boards

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

First Article Testing and Validation Services

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Get full access

Join 750+ contractors already using CLEATUS