Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, December 9 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Liquid Penetrant Inspection Services

Open

Federal

Response Deadline11/23/2026, 09:00:00 AM PST

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for Liquid Penetrant Inspection Services supports the DLA Weapons Support Nuclear Reactor Program. The selected provider will perform 100 percent penetrant inspection for prime contractors, utilizing fluorescent penetrant inspection equipment to conduct Type 1, Method A, Sensitivity Level 2 inspections in accordance with ASTM E1417. The primary objective is to ensure that no indications exceed 0.062 inch, with the final deliverables consisting of detailed inspection reports and certifications. The project is a total small business set-aside under NAICS code 541380 and will be performed in San Diego, California. Personnel assigned to this contract must hold NDT Level II or III certification per NAS 410. Interested parties must respond by November 23, 2026.

General Info

Agency

Department Of Defense → DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

NAICS

541380 - Testing Laboratories and Services

Place of Performance

SAN DIEGO, CA, 92136-3581, USA

Set-Aside

SBA

Documents

This scope was carved out of SPE7M2-27-T-0875.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

HINGE LEAF JBD PANE

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 12

subcontract

Response DeadlineNov 23

Submission deadline

Response Deadline

11/23/2026, 09:00:00 AM PSTin 11 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs 100% penetrant inspection for prime contractors on DLA Weapons Support Nuclear Reactor Program projects. Conducts Type 1, Method A, Sensitivity Level 2 inspection per ASTM E1417 using fluorescent penetrant inspection (FPI) equipment to ensure no indications exceed 0.062 inch. Requires NDT Level II or III certification per NAS 410. Delivers inspection reports and certifications.

Similar Contracts

Same NAICS industry code

Third-Party Quality Assurance and Zero-Based Sampling InspectionThis subcontract involves providing third-party quality assurance and zero-based sampling inspections for prime contractors supporting DLA Weapons Support ASC projects. The selected provider will be responsible for executing sampling plans in accordance with MIL-STD-1916 or ASQ H1331 and utilizing high-precision metrology equipment to verify dimensional tolerances for matched ring sets. Key deliverables include the submission of detailed inspection reports and certifications. To qualify, contractors must hold AS9100 or ISO 9001 certification and possess specific experience with Air Force Critical Safety Item standards. This opportunity is managed by the Department of Defense under NAICS code 541380, with a response deadline set for December 14, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

in about 1 month

Third-Party Quality Assurance and CertificationThis subcontract for Third-Party Quality Assurance and Certification supports the Department of Defense, specifically the DLA Weapons Support Land Supplier Operations Vehicle Support. The selected provider will perform independent inspection and verification of pistons for prime contractors, ensuring that critical, major, and minor attributes are validated. All work must adhere to Reference QAP 19207 12344830 using MIL-STD-1916 or MIL-STD-105/ASQ Z1.4 sampling plans, with precision measurement tools calibrated to national standards. Deliverables include detailed inspection reports and signed Certificates of Conformance. The opportunity is designated as a Women-Owned Small Business set-aside under NAICS code 541380. Performance will take place in Anniston, Alabama. Interested parties must respond by November 23, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

NDT and Quality Certification - Engine MountsThis subcontract for the Department of Defense, specifically the DLA Weapons Support ASC Supplier Oper AE and AF Div, involves providing non-destructive testing and final quality validation for engine mounts. The selected contractor will be responsible for performing magnetic particle, ultrasonic, or X-ray testing in accordance with RQ040, as well as conducting dimensional inspections using CMM. Key deliverables include the preparation of First Article Test reports and the issuance of Certificates of Quality Compliance. To be eligible, contractors must hold NADCAP NDT accreditation and maintain CMMC Level 2 certification. The project falls under NAICS code 541380. Interested parties must submit their responses by the deadline of December 14, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

in about 1 month

First Article Testing (FAT) ServicesThis subcontract for First Article Testing services supports prime contractors delivering aerospace components to the Defense Logistics Agency. The scope of work involves verifying part dimensions, material properties, and overall performance against the technical data package specified in CLIN 0002. Using precision measurement tools and material analysis equipment, the contractor is responsible for generating certified test reports and delivering a validated sample to ensure DLA acceptance. The opportunity is a total small business set-aside under NAICS code 541380, managed by the Department of Defense. Performance will take place at Robins Air Force Base. Interested parties must respond by November 23, 2026, to provide the required validation and formal reporting services.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Metrology and Calibration ServicesThis subcontract for Metrology and Calibration Services supports Navsup Weapon Systems Support projects by providing essential calibration for precision measurement equipment used in NRP Flat Panel A033 repairs. The selected provider will be responsible for calibrating tools used for coordinate and positional dimensional data, ensuring all work is performed using NIST-traceable standards. Compliance with ANSI/NCSL Z540.3 or ISO-10012-1 requirements is mandatory, and the contractor must deliver formal calibration certificates and maintain detailed calibration logs. The opportunity is categorized under NAICS code 541380 and is issued by the Department of Defense. Interested parties must submit their responses by the deadline of December 14, 2026.

Navsup Weapon Systems Support

POSTED

about 5 hours ago

DEADLINE

in about 1 month

Geotechnical Engineering and Materials TestingThis subcontract for Geotechnical Engineering and Materials Testing supports prime contractors on facility projects for the Board of Regents of the University System of Georgia at Dalton State College. The scope of work involves performing comprehensive soil analysis and material testing, which includes conducting geotechnical evaluations through soil sampling and borings, executing material testing during the construction phase, and performing special inspections utilizing laboratory equipment and drilling rigs. The selected provider must employ a Licensed Professional Engineer to ensure technical compliance and is responsible for delivering formal geotechnical evaluation reports and material testing certifications. Interested parties should note the response deadline of December 15, 2026, for this engagement categorized under NAICS code 541380.

Board Of(university System of Georgia) Regents

POSTED

about 18 hours ago

DEADLINE

in about 1 month

Certified Welding Inspector (CWI) for Structural RepairThis subcontract opportunity is for a Certified Welding Inspector to perform structural weld inspections for prime contractors working on Pioneer Valley Transit Authority vehicle collision repair projects in Springfield, Massachusetts. The selected professional will be responsible for conducting in-process inspections to verify weld standards before finishing, utilizing specialized welding inspection tools and non-destructive testing equipment to provide technical opinions on structural integrity and weld quality. The contractor must hold a valid Certified Welding Inspector certification to qualify for the role. Key deliverables include the provision of certified weld inspection reports and formal approval of structural components. Interested parties should note the response deadline of December 11, 2026, for this specialized technical service under NAICS code 541380.

Pioneer Valley Transit Authority

POSTED

about 20 hours ago

DEADLINE

RFQ27-004 Independent Inspection Services

Solicitation # BD-26-2263-PTA01-PTVA1-135356

The Pioneer Valley Transit Authority (PVTA) is soliciting quotes under RFQ 27-004 for an independent firm to provide inspection and technical advisory services for the collision repair of a 2024 New Flyer XDE40 hybrid bus, Unit 1876. This project is associated with repairs being conducted under RFP 27-003. The scope of work requires the selected firm to perform a comprehensive series of evaluations, including baseline, teardown, in-process, pre-delivery, and final acceptance inspections. Additionally, the firm must provide a review of the repair plan, offer expert opinions on concealed damage, and ensure that structural weld inspections are performed by a Certified Welding Inspector (CWI). This solicitation, identified by number BD-26-2263-PTA01-PTVA1-135356, is categorized under NAICS code 541380. Interested parties must submit their questions by November 23, 2026, at 2:00 PM EST. Final quotes are due via email to [email hidden] no later than December 11, 2026, at 2:00 PM EST. The performance of these services is centered in Springfield, Massachusetts, with primary administrative and billing contact managed through the PVTA procurement office.

Pioneer Valley Transit Authority

POSTED

about 20 hours ago

DEADLINE

First Article Testing (FAT) and Product Verification Testing (PVT)This subcontract, issued by the DLA Weapons Support Land Supply Chain for the Department of Defense, involves specialized validation testing for mortar component projects. The selected contractor will perform First Article Testing and Product Verification Testing using specific measurement tools and rigs to ensure that tolerances and performance align with the Technical Data Package. Key deliverables include the submission of FAT reports and PVT validation results, with the requirement to provide five PVT samples from each production contractor. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 541380, with the place of performance located in New Cumberland, Pennsylvania. Interested parties must respond by November 23, 2026, to support these critical quality assurance efforts for prime contractors.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Aerospace Component Inspection and SamplingThis subcontract, issued by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div, involves specialized quality inspection and sampling for aerospace hardware. The selected contractor will perform these services at the point of origin for 11 units of fuselage fittings, utilizing MIL-STD-1916 or ASQ H1331 Table 1 zero-based sampling plans. To ensure compliance and precision, the contractor must maintain ISO 9001:2015 certification and utilize precision measurement tools, ultimately delivering detailed inspection reports and certifications of acceptance. The project is categorized under NAICS code 541380 and will be performed in San Diego, California. Interested parties must adhere to the timeline established by the posting date of November 11, 2026, with a response deadline of November 19, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

First Article Test (FAT) and ValidationThis subcontract, issued by the Department of Defense in San Diego, requires the testing and validation of one bronze gate valve to support prime contractors on DLA supply contracts. The selected provider must conduct pressure testing to verify a 100 PSI WOG rating and ensure full compliance with MIL-V-1189D standards. The scope of work includes coordinating with the Contracting Officer and Quality Assurance Representative for in-process verification. The contractor is responsible for delivering one tested unit for government evaluation along with a formal First Article Test Report, which must be submitted within 90 calendar days. This opportunity is designated as a Total Small Business Set-Aside under NAICS code 541380, with performance taking place in San Diego.

POSTED

DEADLINE

First Article Test (FAT) SpecialistThis subcontract opportunity is for a First Article Test Specialist to support prime contractors delivering DLA Troop Support Construction and Equipment contracts. The selected provider will perform testing and validation on the first production batch to ensure strict compliance with MIL-PRF-87260 and CID A-A-3174 standards. Utilizing specialized laboratory equipment, the specialist will verify critical density and compression properties, ultimately delivering a comprehensive First Article Test report and a certification of compliance. The project is associated with the Department of Defense and will be performed at the DDSP New Cumberland Facility in New Cumberland, Pennsylvania. Interested parties should note the solicitation was posted on November 11, 2026, with a response deadline of November 23, 2026. The work falls under NAICS code 541380, focusing on testing and validation services to ensure military specifications are met prior to full-scale production.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

Same awarding agency

Special Purpose Electrical Cable SupplyThis subcontract, issued by the DLA Weapons Support Nuclear Reactor Program under the Department of Defense, requires the manufacture or sourcing of 18,287 feet of special purpose electrical cabling. The materials must strictly adhere to the technical specifications for NSN 6145-01-575-8783 and comply with the DLA Master List of Technical and Quality Requirements. All supplies are to be packaged and shipped FOB Origin, with a final delivery deadline for inspection and acceptance set within 113 days of the contract award. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 235310, with the place of performance located in New Cumberland, Pennsylvania. Interested parties must have responded by the deadline of November 23, 2026, to provide these critical components for prime contractors delivering DLA supply contracts.

Electrical Contractors

POSTED

DEADLINE

Special Purpose Electrical Cable SupplierThis subcontract opportunity is for a supplier to provide 551 feet of special purpose electrical cable to prime contractors supporting the DLA Weapons Support Nuclear Reactor Program. The cable must be manufactured in continuous lengths of 100 feet per roll and packaged in envelopes that conform to the MIL-PRF-23199E standard. To ensure compliance, the supplier must adhere to advice codes 2N, 28, or 34, which strictly prohibit the use of multiple unit packs. Eligible bidders are required to possess a valid UEI and CAGE code. The performance of this contract will take place in New Cumberland, Pennsylvania. Interested parties must submit their responses by the deadline of November 23, 2026.

Electrical Contractors

POSTED

DEADLINE

Precision Machining and Fabrication of Hinge Leaf JBD PanesThis subcontract involves the precision machining and fabrication of eight Hinge Leaf JBD Panes for the DLA Weapons Support Nuclear Reactor Program. The scope of work requires the use of CNC machining, milling, and turning to process 4340 alloy steel in strict accordance with MIL-STD-2035 and provided technical data package specifications. Performance will take place in San Diego, California. As a total small business set-aside under NAICS code 332710, the contract mandates rigorous security and quality compliance. Eligible contractors must hold CMMC Level 2 and DFARS 252.204-7012 certifications, as well as certification under the US/Canada Joint Certification Program. The response deadline for this requirement is November 23, 2026.

POSTED

DEADLINE

4340 Alloy Steel Material SupplierThis subcontract opportunity is for a material supplier to provide high-strength 4340 alloy steel to prime contractors supporting the Department of Defense DLA Weapons Support Nuclear Reactor Program. The supplier must deliver certified steel stock that adheres strictly to AMS 6484 or AMS 6415 specifications, accompanied by Mill Test Reports to verify that all chemical and physical properties meet the required standards. Due to the nature of the program, strict compliance with ITAR and EAR export controls is mandatory. The project is designated as a Total Small Business Set-Aside under NAICS code 423430, with the place of performance located in San Diego, California. Interested parties must submit their responses by November 23, 2026.

Computer and Computer Peripheral Equipment and Software Merchant Wholesalers

POSTED

DEADLINE

Supply of Fixed Electrolytic Capacitors (NSN 5910-01-270-0649)This subcontract involves the supply of 180 fixed electrolytic capacitors under NSN 5910-01-270-0649 for the DLA Weapons Support Nuclear Reactor Program. The contractor is responsible for manufacturing or sourcing components that strictly adhere to MIL-PRF-39003/1L and MIL-PRF-39003P SUPP 1 standards. Key technical requirements include ensuring a mercury-free composition and applying lead finish markings in accordance with IPC/JEDEC J-STD-609. Logistical requirements dictate that all units must be individually packed and marked according to MIL-STD-2073-1E and MIL-STD-129. The delivery terms are established as FOB Origin, with the place of performance located in New Cumberland. This procurement falls under NAICS code 334419 and is managed by the Department of Defense.

Other Electronic Component Manufacturing

POSTED

DEADLINE

HINGE LEAF JBD PANE

Solicitation # SPE7M2-27-T-0875

Solicitation SPE7M2-27-T-0875 is a fixed-price procurement issued by the DLA Weapons Support Nuclear Reactor Program for eight Hinge Leaf JBD Panes, identified by NSN 1720-01-655-9513. The contract requires the use of 4340 steel per AMS 6484 or AMS 6415 and mandates a 100% penetrant inspection according to ASTM E1417, Type 1, Method A, Sensitivity Level 2. All parts must adhere to MIL-STD-2035, with no indications exceeding 0.062 inch. Delivery is required within 133 days, with a need ship date of April 6, 2027, and an original required delivery date of September 10, 2027, shipping FOB Origin to San Diego, California. The procurement is subject to strict export controls under ITAR and EAR, requiring contractors to have an approved US/Canada Joint Certification Program certification and completed DLA export-control training. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, with palletization following RP001. Invoicing and payment must be processed electronically via the Wide Area WorkFlow system. The solicitation is a total small business set-aside under FAR 19.5 and includes stringent cybersecurity requirements, including CMMC Level 2 and DFARS 252.204-7012 for safeguarding covered defense information.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

CAPACITOR, FIXED, ELECTR

Solicitation # SPE7M2-27-T-0890

This solicitation, issued by the DLA Weapons Support Nuclear Reactor Program, is a small business set-aside for the procurement of 180 fixed electrolytic capacitors (NSN 5910-01-270-0649). The items are designated as critical application items and must comply with basic specification MIL-PRF-39003/1L and reference specification MIL-PRF-39003P SUPP 1. Delivery is required within 167 days after order, with a need ship date of May 10, 2027, and a final required delivery date of July 9, 2027. The shipment is FOB Origin and will be delivered to the DDSP New Cumberland Facility in Pennsylvania. The contract mandates strict adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Specifically, the contractor must apply lead finish markings per IPC/JEDEC J-STD-609 to each individual unit pack. There is a strict prohibition on the intentional addition of mercury or mercury-containing compounds, except for specific functional exceptions. Administrative requirements include the use of the Wide Area WorkFlow (WAWF) system for invoicing and payment. The acquisition is subject to various FAR and DFARS clauses, including the Buy American Act, safeguarding of covered defense information, and prohibitions on covered defense telecommunications equipment.

Semiconductor and Related Device Manufacturing

POSTED

DEADLINE

CABLE, SPECIAL PURPOSE,

Solicitation # SPE7M2-27-T-0891

This fixed-price solicitation, SPE7M2-27-T-0891, is issued by the Defense Logistics Agency for the procurement of 18,287 feet of special purpose electrical cable, identified by NSN 6145-01-575-8783. The item is classified as a critical application item and must comply with MIL-DTL-24643/61B and MIL-DTL-24643D specifications. The procurement is a total small business set-aside and requires the use of the Qualified Products List or Qualified Manufacturers List. A key technical restriction prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, with specific exceptions for functional mercury in batteries or sensors as specified by NAVSEA. Delivery is required within 113 days after order, with a final required delivery date of July 19, 2027, shipped FOB Origin to the DDSP New Cumberland facility in Pennsylvania. Inspection and acceptance will occur at the destination. Packaging must adhere to MIL-STD-2073-1E and MIL-DTL-12000, with markings following MIL-STD-129. The contract incorporates various FAR and DFARS clauses, including requirements for the Buy American and Balance of Payments Program, NIST SP 800-171 assessment, and the safeguarding of covered defense information. Payment and receiving reports must be processed electronically via the Wide Area WorkFlow system.

Other Communication and Energy Wire Manufacturing

POSTED

DEADLINE

CABLE, SPECIAL PURPOSE,

Solicitation # SPE7M2-27-T-0892

Solicitation SPE7M2-27-T-0892, issued by the DLA Weapons Support Nuclear Reactor Program, is for the procurement of 551 feet of special purpose electrical cable, specifically Thermo Electric Wire and Cable LLC part number G/GS-20F-TT. The material must be delivered in one continuous length of 100 feet per roll, with strict adherence to advice codes regarding the acceptability of multiple unit packs. The contract specifies a quantity variance of plus or minus 5 percent and requires delivery to the DLA Distribution DDSP New Cumberland facility in Pennsylvania, with a required delivery date of July 9, 2027, and a lead time of 167 days after order. The contractor must comply with rigorous technical and quality standards, including MIL-DTL-12000 for preservation and packaging, MIL-STD-129 for marking, and MIL-PRF-23199E for envelopes. Special restrictions prohibit the intentional addition of mercury or mercury-containing compounds, except for specific functional exceptions per NAVSEA 5100-003D. Inspection and acceptance are conducted at the destination per FAR 52.246-2. The solicitation incorporates various FAR and DFARS clauses covering cybersecurity, the Buy American Act, and hazardous material identification, and requires the use of the Wide Area WorkFlow system for electronic invoicing and payment processing.

Other Aluminum Rolling, Drawing, and Extruding

POSTED

DEADLINE

Helical Compression Spring SupplierThis subcontract, issued by the DLA Weapons Support Nuclear Reactor Program under the Department of Defense, seeks a supplier for four helical compression springs. The required components must be part number 160434-A00 for L3Harris Maritime Power & Energy or a certified equivalent that meets NSN 5360014628637 specifications. All deliverables must adhere to MIL-STD-129 marking standards and follow RP001 DLA packaging and palletization requirements. Eligible bidders must possess a valid UEI and CAGE code. The performance of the contract will take place in Phoenix, Arizona. Interested parties must submit their responses by the deadline of November 23, 2026.

Spring Manufacturing

POSTED

DEADLINE

First Destination Transportation (FDT) LogisticsThis subcontract for First Destination Transportation (FDT) Logistics supports the Department of Defense under the DLA Weapons Support Nuclear Reactor Program. The selected provider will perform transportation and delivery services for prime contractors, specifically managing the FDT process. Key responsibilities include handling ocean freight documentation, such as vessel registries and bills of lading, ensuring the use of U.S.-flagged ocean vessels for all maritime shipments, and coordinating final delivery and carrier reporting. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 484110, with the place of performance located in Phoenix, Arizona. Interested parties must adhere to the response deadline of November 23, 2026.

General Freight Trucking, Local

POSTED

DEADLINE

Incandescent Lamp Supply (NSN 6240-00-1436558)This subcontract involves the supply of 2,000 incandescent lamps for prime contractors supporting the Department of Defense DLA Weapons Support Nuclear Reactor Program. The contractor is responsible for manufacturing or sourcing the lamps to meet NSN 6240-00-1436558 specifications, with all packaging and marking performed according to MIL-STD-129 and RP001 DLA Packaging Requirements. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 335911, with performance taking place in Phoenix, Arizona. Interested parties must respond by November 23, 2026, to fulfill the requirements of this Department of Defense procurement.

Storage Battery Manufacturing

POSTED

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

First Article Test (FAT) Validation

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

First Article Testing and Reporting for NSN 5340-01-551-8772

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Source Inspection and Quality Certification Services

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Production Lot Testing (PLT) and First Article Testing (FAT)

DLA WEAPONS SUPPORT ELECTRICAL DEVICES DIV

POSTED

DEADLINE

Production Lot Testing (PLT) and First Article Testing

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Get full access

Join 750+ contractors already using CLEATUS