Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, December 9 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Third-Party Quality Assurance and Certification

Open

Federal

Response Deadline11/23/2026, 11:00:00 AM CST

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for Third-Party Quality Assurance and Certification supports the Department of Defense, specifically the DLA Weapons Support Land Supplier Operations Vehicle Support. The selected provider will perform independent inspection and verification of pistons for prime contractors, ensuring that critical, major, and minor attributes are validated. All work must adhere to Reference QAP 19207 12344830 using MIL-STD-1916 or MIL-STD-105/ASQ Z1.4 sampling plans, with precision measurement tools calibrated to national standards. Deliverables include detailed inspection reports and signed Certificates of Conformance. The opportunity is designated as a Women-Owned Small Business set-aside under NAICS code 541380. Performance will take place in Anniston, Alabama. Interested parties must respond by November 23, 2026.

General Info

Agency

Department Of Defense → DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

NAICS

541380 - Testing Laboratories and Services

Place of Performance

ANNISTON, AL, 36201-4199, USA

Set-Aside

WOSB

Documents

This scope was carved out of SPE7L3-27-T-2575.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

PISTON, LINEAR ACTUATIN

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 12

subcontract

Response DeadlineNov 23

Submission deadline

Response Deadline

11/23/2026, 11:00:00 AM CSTin 11 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs independent inspection and verification of pistons for prime contractors on DLA Weapons Support projects. Validates critical, major, and minor attributes using MIL-STD-1916 or MIL-STD-105/ASQ Z1.4 sampling plans per Reference QAP 19207 12344830. Utilizes precision measurement tools calibrated to national standards. Delivers inspection reports and signed Certificates of Conformance.

Similar Contracts

Same NAICS industry code

Third-Party Quality Assurance and Zero-Based Sampling InspectionThis subcontract involves providing third-party quality assurance and zero-based sampling inspections for prime contractors supporting DLA Weapons Support ASC projects. The selected provider will be responsible for executing sampling plans in accordance with MIL-STD-1916 or ASQ H1331 and utilizing high-precision metrology equipment to verify dimensional tolerances for matched ring sets. Key deliverables include the submission of detailed inspection reports and certifications. To qualify, contractors must hold AS9100 or ISO 9001 certification and possess specific experience with Air Force Critical Safety Item standards. This opportunity is managed by the Department of Defense under NAICS code 541380, with a response deadline set for December 14, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

in about 1 month

Liquid Penetrant Inspection ServicesThis subcontract for Liquid Penetrant Inspection Services supports the DLA Weapons Support Nuclear Reactor Program. The selected provider will perform 100 percent penetrant inspection for prime contractors, utilizing fluorescent penetrant inspection equipment to conduct Type 1, Method A, Sensitivity Level 2 inspections in accordance with ASTM E1417. The primary objective is to ensure that no indications exceed 0.062 inch, with the final deliverables consisting of detailed inspection reports and certifications. The project is a total small business set-aside under NAICS code 541380 and will be performed in San Diego, California. Personnel assigned to this contract must hold NDT Level II or III certification per NAS 410. Interested parties must respond by November 23, 2026.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

NDT and Quality Certification - Engine MountsThis subcontract for the Department of Defense, specifically the DLA Weapons Support ASC Supplier Oper AE and AF Div, involves providing non-destructive testing and final quality validation for engine mounts. The selected contractor will be responsible for performing magnetic particle, ultrasonic, or X-ray testing in accordance with RQ040, as well as conducting dimensional inspections using CMM. Key deliverables include the preparation of First Article Test reports and the issuance of Certificates of Quality Compliance. To be eligible, contractors must hold NADCAP NDT accreditation and maintain CMMC Level 2 certification. The project falls under NAICS code 541380. Interested parties must submit their responses by the deadline of December 14, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

in about 1 month

First Article Testing (FAT) ServicesThis subcontract for First Article Testing services supports prime contractors delivering aerospace components to the Defense Logistics Agency. The scope of work involves verifying part dimensions, material properties, and overall performance against the technical data package specified in CLIN 0002. Using precision measurement tools and material analysis equipment, the contractor is responsible for generating certified test reports and delivering a validated sample to ensure DLA acceptance. The opportunity is a total small business set-aside under NAICS code 541380, managed by the Department of Defense. Performance will take place at Robins Air Force Base. Interested parties must respond by November 23, 2026, to provide the required validation and formal reporting services.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Metrology and Calibration ServicesThis subcontract for Metrology and Calibration Services supports Navsup Weapon Systems Support projects by providing essential calibration for precision measurement equipment used in NRP Flat Panel A033 repairs. The selected provider will be responsible for calibrating tools used for coordinate and positional dimensional data, ensuring all work is performed using NIST-traceable standards. Compliance with ANSI/NCSL Z540.3 or ISO-10012-1 requirements is mandatory, and the contractor must deliver formal calibration certificates and maintain detailed calibration logs. The opportunity is categorized under NAICS code 541380 and is issued by the Department of Defense. Interested parties must submit their responses by the deadline of December 14, 2026.

Navsup Weapon Systems Support

POSTED

about 5 hours ago

DEADLINE

in about 1 month

Geotechnical Engineering and Materials TestingThis subcontract for Geotechnical Engineering and Materials Testing supports prime contractors on facility projects for the Board of Regents of the University System of Georgia at Dalton State College. The scope of work involves performing comprehensive soil analysis and material testing, which includes conducting geotechnical evaluations through soil sampling and borings, executing material testing during the construction phase, and performing special inspections utilizing laboratory equipment and drilling rigs. The selected provider must employ a Licensed Professional Engineer to ensure technical compliance and is responsible for delivering formal geotechnical evaluation reports and material testing certifications. Interested parties should note the response deadline of December 15, 2026, for this engagement categorized under NAICS code 541380.

Board Of(university System of Georgia) Regents

POSTED

about 18 hours ago

DEADLINE

in about 1 month

Certified Welding Inspector (CWI) for Structural RepairThis subcontract opportunity is for a Certified Welding Inspector to perform structural weld inspections for prime contractors working on Pioneer Valley Transit Authority vehicle collision repair projects in Springfield, Massachusetts. The selected professional will be responsible for conducting in-process inspections to verify weld standards before finishing, utilizing specialized welding inspection tools and non-destructive testing equipment to provide technical opinions on structural integrity and weld quality. The contractor must hold a valid Certified Welding Inspector certification to qualify for the role. Key deliverables include the provision of certified weld inspection reports and formal approval of structural components. Interested parties should note the response deadline of December 11, 2026, for this specialized technical service under NAICS code 541380.

Pioneer Valley Transit Authority

POSTED

about 20 hours ago

DEADLINE

RFQ27-004 Independent Inspection Services

Solicitation # BD-26-2263-PTA01-PTVA1-135356

The Pioneer Valley Transit Authority (PVTA) is soliciting quotes under RFQ 27-004 for an independent firm to provide inspection and technical advisory services for the collision repair of a 2024 New Flyer XDE40 hybrid bus, Unit 1876. This project is associated with repairs being conducted under RFP 27-003. The scope of work requires the selected firm to perform a comprehensive series of evaluations, including baseline, teardown, in-process, pre-delivery, and final acceptance inspections. Additionally, the firm must provide a review of the repair plan, offer expert opinions on concealed damage, and ensure that structural weld inspections are performed by a Certified Welding Inspector (CWI). This solicitation, identified by number BD-26-2263-PTA01-PTVA1-135356, is categorized under NAICS code 541380. Interested parties must submit their questions by November 23, 2026, at 2:00 PM EST. Final quotes are due via email to [email hidden] no later than December 11, 2026, at 2:00 PM EST. The performance of these services is centered in Springfield, Massachusetts, with primary administrative and billing contact managed through the PVTA procurement office.

Pioneer Valley Transit Authority

POSTED

about 20 hours ago

DEADLINE

First Article Testing (FAT) and Product Verification Testing (PVT)This subcontract, issued by the DLA Weapons Support Land Supply Chain for the Department of Defense, involves specialized validation testing for mortar component projects. The selected contractor will perform First Article Testing and Product Verification Testing using specific measurement tools and rigs to ensure that tolerances and performance align with the Technical Data Package. Key deliverables include the submission of FAT reports and PVT validation results, with the requirement to provide five PVT samples from each production contractor. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 541380, with the place of performance located in New Cumberland, Pennsylvania. Interested parties must respond by November 23, 2026, to support these critical quality assurance efforts for prime contractors.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Aerospace Component Inspection and SamplingThis subcontract, issued by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div, involves specialized quality inspection and sampling for aerospace hardware. The selected contractor will perform these services at the point of origin for 11 units of fuselage fittings, utilizing MIL-STD-1916 or ASQ H1331 Table 1 zero-based sampling plans. To ensure compliance and precision, the contractor must maintain ISO 9001:2015 certification and utilize precision measurement tools, ultimately delivering detailed inspection reports and certifications of acceptance. The project is categorized under NAICS code 541380 and will be performed in San Diego, California. Interested parties must adhere to the timeline established by the posting date of November 11, 2026, with a response deadline of November 19, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

First Article Test (FAT) and ValidationThis subcontract, issued by the Department of Defense in San Diego, requires the testing and validation of one bronze gate valve to support prime contractors on DLA supply contracts. The selected provider must conduct pressure testing to verify a 100 PSI WOG rating and ensure full compliance with MIL-V-1189D standards. The scope of work includes coordinating with the Contracting Officer and Quality Assurance Representative for in-process verification. The contractor is responsible for delivering one tested unit for government evaluation along with a formal First Article Test Report, which must be submitted within 90 calendar days. This opportunity is designated as a Total Small Business Set-Aside under NAICS code 541380, with performance taking place in San Diego.

POSTED

DEADLINE

First Article Test (FAT) SpecialistThis subcontract opportunity is for a First Article Test Specialist to support prime contractors delivering DLA Troop Support Construction and Equipment contracts. The selected provider will perform testing and validation on the first production batch to ensure strict compliance with MIL-PRF-87260 and CID A-A-3174 standards. Utilizing specialized laboratory equipment, the specialist will verify critical density and compression properties, ultimately delivering a comprehensive First Article Test report and a certification of compliance. The project is associated with the Department of Defense and will be performed at the DDSP New Cumberland Facility in New Cumberland, Pennsylvania. Interested parties should note the solicitation was posted on November 11, 2026, with a response deadline of November 23, 2026. The work falls under NAICS code 541380, focusing on testing and validation services to ensure military specifications are met prior to full-scale production.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

Same awarding agency

Military-Grade Packaging and FulfillmentThis subcontract, titled Military-Grade Packaging and Fulfillment, is a Women-Owned Small Business set-aside issued by the Department of Defense for the DLA Weapons Support Land Supplier Opns Vehicle Spt. The contractor is responsible for providing specialized packaging and performing the final packing of pistons for prime contractors. All work must strictly adhere to MIL-STD-2073-1E, MIL-STD-129, and RP001 standards, utilizing specific preservative materials Mat 49 and wrap materials Mat GB. The scope of work includes marking items and ensuring full compliance with First Destination Transportation requirements. Final deliverables must be palletized and delivered to DLA Distribution Anniston in Alabama. The solicitation was posted on November 12, 2026, with a response deadline of November 23, 2026, falling under NAICS code 488510.

Freight Transportation Arrangement

POSTED

DEADLINE

Manufacturing of Linear Actuating Cylinder PistonsThis subcontract involves the manufacture of 391 linear actuating cylinder pistons for prime contractors supporting the Department of Defense DLA Weapons Support Land Supplier Operations. Production must strictly adhere to Basic Drawing NR 19207 12344830 Revision D and TDP Rev B Gen 2. The contract mandates the use of traditional subtractive or formative manufacturing processes, explicitly prohibiting the use of additive manufacturing. Eligible bidders must be Women-Owned Small Businesses and maintain ISO 9001:2015, JCP certification, and CMMC Level 2 compliance. All completed units must be delivered in full compliance with DLA technical data. The place of performance is located in Anniston, Alabama, with a response deadline of November 23, 2026.

POSTED

DEADLINE

MIL-SPEC Packaging and Sealing ServicesThis subcontract for MIL-SPEC Packaging and Sealing Services supports prime contractors on DLA Weapons Support projects. The scope of work involves the specialized packaging and sealing of gaskets using medium-duty, waterproof, greaseproof, and opaque bags to prevent ultraviolet deterioration. All work must be performed in strict accordance with MIL-DTL-117, Type II, Class C, Style 1 and adhere to MIL-STD-2073-1E packaging data standards. The selected provider is responsible for delivering the gaskets fully packaged, sealed, and marked for shipment to the designated destination facility. This project is managed under the Department of Defense for the DLA Weapons Support Land Supplier Opns Vehicle Spt, with the place of performance located in New Cumberland, Pennsylvania. The response deadline for this opportunity is November 23, 2026.

Motor Vehicle Towing

POSTED

DEADLINE

Gasket Supplier (NSN 5330-01-102-6972)This subcontract involves the fabrication or sourcing of 231 gaskets under NSN 5330-01-102-6972 for prime contractors supporting the Department of Defense DLA Weapons Support Land Supplier Operations. The supplier must ensure all materials are asbestos-free and contain no Class I ozone-depleting chemicals. Additionally, the contract requires strict adherence to the Buy American Act and the Berry Amendment, as well as compliance with MIL-STD-129 and MIL-STD-130N marking standards. The final deliverables must be shipped to the SP New Cumberland Facility with a minimum remaining shelf life of 85 percent. This procurement falls under NAICS code 339999 and is managed by the DLA Weapons Support agency.

All Other Miscellaneous Manufacturing

POSTED

DEADLINE

Preformed Packing Supplier (NSN 5330015362079)This subcontract involves the supply of 829 units of preformed packing components under NSN 5330015362079 for the Department of Defense, specifically supporting the DLA Weapons Support Land Supplier Operations Vehicle Support. The supplier is responsible for manufacturing or sourcing items that adhere to strict inspection and acceptance standards at the point of origin to ensure full compliance with agency requirements. Logistical execution requires the coordination of delivery to the DLA Distribution DDSP New Cumberland Facility in New Cumberland, Pennsylvania. All necessary documentation and administrative submissions must be processed through the DIBBS system. The contract falls under NAICS code 325412, with a response deadline set for November 23, 2026.

Pharmaceutical Preparation Manufacturing

POSTED

DEADLINE

Supply of Specialized Gaskets (NSN 5330008245424)This subcontract involves the manufacture or procurement of four specialized gaskets under NSN 5330008245424 for prime contractors supporting the Defense Logistics Agency Weapons Support Land Supplier Operations. A critical requirement of the contract is strict adherence to FED-STD-313, ensuring that all provided materials are completely asbestos-free. The selected provider must comply with RP001 and RQ011 standards for packaging and identification, while also submitting Source Approval Request documentation in accordance with RC001. Performance for this Department of Defense requirement will take place in Ft Riley, with a response deadline set for November 23, 2026.

All Other Miscellaneous Manufacturing

POSTED

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services supports the Department of Defense, specifically the DLA Weapons Support Land Supplier Operations Vehicle Support. The scope of work involves providing specialized packaging materials and performing marking and packing services for prime contractors. The contractor is responsible for delivering 15 rifle mounts, ensuring all items are packed and marked in strict accordance with MIL-STD-2073-1E and MIL-STD-129 standards. Shipments are to be prepared for FOB Origin delivery to the DLA Distribution DDSP New Cumberland Facility located in New Cumberland, Pennsylvania. The project falls under NAICS code 488510, with a response deadline set for November 23, 2026.

Freight Transportation Arrangement

POSTED

DEADLINE

Non-Chromate Surface FinishingThis subcontract, titled Non-Chromate Surface Finishing, involves the application of protective surface treatments and coatings for rifle mounts on behalf of prime contractors supporting the DLA Weapons Support Land Supplier Opns Vehicle Spt. The work requires the use of industrial plating equipment to achieve finishes that align with source-controlled drawings. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 332813. A critical requirement of this contract is the strict prohibition of hexavalent chromium and Class I ozone-depleting chemicals. The contractor must provide certification confirming that these prohibited hazardous materials are not used during the finishing process. The solicitation was posted on November 12, 2026, with a response deadline of November 23, 2026.

Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

DEADLINE

Precision Manufacturing of Rifle MountsThis subcontract involves the precision machining and fabrication of 15 rifle mounts, identified by NSN 1005-01-702-7401, for prime contractors supporting DLA Weapons Support projects. The work requires the use of CNC equipment to produce critical gun parts in strict accordance with source-controlled drawings and the DLA Master List of Technical and Quality Requirements. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 332710. The contractor must comply with DFARS cybersecurity standards and adhere to environmental restrictions prohibiting the use of hexavalent chromium and Class I ozone-depleting chemicals. This Department of Defense requirement was posted on November 12, 2026, with a response deadline of November 23, 2026.

POSTED

DEADLINE

PISTON, LINEAR ACTUATIN

Solicitation # SPE7L3-27-T-2575

Solicitation SPE7L3-27-T-2575 is a federal procurement issued by the DLA Weapons Support Land Supplier Operations Vehicle Support for the acquisition of 391 linear actuating cylinder pistons under NSN 3040-01-345-8892. The contract is designated as a Women-Owned Small Business set-aside with a delivery requirement of 161 days after receipt of order, delivered FOB Origin to DLA Distribution Anniston. The procurement is managed under the First Destination Transportation program to optimize shipping costs and requires the use of the Wide Area WorkFlow system for all invoicing and receiving reports. Technical compliance is governed by the DLA Master List of Technical and Quality Requirements, with a strict prohibition on the use of Class I ozone-depleting chemicals. The contractor must maintain a quality system compliant with ISO 9001:2015, and inspection and acceptance will occur at the origin. Due to the nature of the technical data, eligible offerors must possess an approved US/Canada Joint Certification Program certification and comply with ITAR and EAR export controls. Additionally, the government will not accept any items produced using additive manufacturing for this procurement.

Mechanical Power Transmission Equipment Manufacturing

POSTED

DEADLINE

Solicitation # SPE7L3-27-T-2574

Solicitation SPE7L3-27-T-2574 is a fixed-price procurement issued by the DLA Weapons Support, Land Supplier Operations Vehicle Support for the acquisition of 231 gaskets under NSN 5330-01-102-6972. The items are classified as commercial products and must be entirely free of asbestos and Class I ozone-depleting chemicals. Delivery is required within 58 days after order, with a need ship date of March 30, 2026, and a final delivery destination at the SP New Cumberland Facility in Pennsylvania. Technical requirements mandate that the gaskets be packaged and sealed in medium-duty, waterproof, greaseproof, opaque bags per MIL-DTL-117, Type II, Class C, Style 1 to prevent deterioration from ultraviolet rays. Marking must comply with MIL-STD-129 and MIL-STD-130N, and items must retain 85% of their total shelf life upon delivery. Inspection and acceptance will occur at the destination. The contract incorporates several critical regulatory requirements, including the Buy American Act, Berry Amendment, and DFARS cybersecurity reporting standards. Offerors must submit quotes via DIBBS and are prohibited from using additive manufacturing processes unless specifically authorized. Payment and invoicing are to be processed electronically through the Wide Area Workflow system.

Aircraft Manufacturing

POSTED

DEADLINE

Solicitation # SPE7L3-27-T-2573

Solicitation SPE7L3-27-T-2573 is a small business set-aside procurement for 15 rifle mounts (NSN 1005017027401) with a required delivery date of February 25, 2027. The items are designated as critical gun parts with unique requirements and are subject to source controlled drawings. Delivery is established as FOB Origin, with the final destination being the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The contract mandates strict quality and safety standards, including the prohibition of Class I ozone-depleting chemicals and hexavalent chromium. Product inspection will be conducted by a Quality Assurance Representative at the actual manufacturer's facility, and Product Verification Testing may be invoked prior to the acceptance of each shipment. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, and the items are subject to demilitarization requirements for small arms weapons and parts. Administration is handled via the Wide Area WorkFlow system, and the contract incorporates various FAR and DFARS clauses regarding cybersecurity, safeguarding covered defense information, and the Buy American Act.

Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

First Article Test (FAT) Validation

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

First Article Testing and Reporting for NSN 5340-01-551-8772

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Source Inspection and Quality Certification Services

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Production Lot Testing (PLT) and First Article Testing (FAT)

DLA WEAPONS SUPPORT ELECTRICAL DEVICES DIV

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Get full access

Join 750+ contractors already using CLEATUS