Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

First Article Testing Services

Active

Federal

Response Deadline08/06/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the performance of First Article Testing on three units of air breathing hose, with all testing to be conducted in strict compliance with military standards and FAR 52.209-3. The successful bidder must prepare and submit a fully compliant test report no later than 90 days after contract award, ensuring all technical and procedural requirements are met to validate the product's conformity to specifications. The testing scope is focused on verifying the performance, safety, and durability of the air breathing hose under defined operational conditions as mandated by defense procurement regulations. This subcontract is managed by the Fluid Handling Division of the Department of Defense, with performance expected to take place in San Diego, CA, at the specified zip code 92136-3581. The solicitation was posted on July 26, 2026, and responses were due by August 6, 2026, under NAICS code 541380, which classifies the work within scientific and technical consulting services. Although no set-aside designation or point of contact is provided, bidders must ensure adherence to all federal acquisition requirements and military testing protocols to meet the deliverables, with failure to comply potentially resulting in rejection or contractual nonconformance.

General Info

First Article Testing on three air breathing hoses per military standards, report due in 90 days at San Diego, CA.

Agency

Department Of Defense → FLUID HANDLING DIVISIONView Agency

NAICS

541380 - Testing Laboratories and ServicesView NAICS

Place of Performance

SAN DIEGO, CA, 92136-3581, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 26

subcontract

Response DeadlineAug 6

Submission deadline

Response Deadline

08/06/2026, 05:00:00 PM UTCin 10 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → FLUID HANDLING DIVISION

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → FLUID HANDLING DIVISION

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Conduct First Article Testing (FAT) on three units of air breathing hose, prepare and submit a compliant test report within 90 days, in accordance with FAR 52.209-3 and military standards.

Similar Contracts

Same NAICS industry code

Test Reporting and Quality Assurance SupportThis contract requires the execution of test reporting and quality assurance support in alignment with the DI-NDTI-80809B standard, encompassing the generation and validation of test reports to ensure compliance with accepted quality thresholds. The scope includes conducting sampling inspections and maintaining adherence to Acceptable Quality Level (AQL) criteria for critical, major, and minor defects, ensuring that all delivered products meet stringent defense quality expectations. The work must be performed under the oversight of the ASC Commodities Division within the Department of Defense and is structured as a subcontract to be awarded under a Total Small Business Set-Aside, limiting eligibility to small businesses as defined by the Small Business Administration. The NAICS code 541380 indicates the work falls under Other Scientific and Technical Consulting Services, emphasizing the need for specialized technical expertise in quality control processes. The solicitation was posted on July 27, 2026, with responses due by August 7, 2026, and performance location details are not specified, leaving flexibility for the vendor to determine operational logistics within the required compliance framework.

ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

26RFSQ72 Materials and Geotechnical ServicesWilliamson County is seeking qualified engineering firms to provide Materials Testing and Geotechnical Engineering services in support of various county programs including the Road Bond Program, Road and Bridge Division, Development Services & Drainage Division, and County Facilities. The county anticipates selecting approximately three firms to handle these services, though the Commissioners Court retains the discretion to choose more or fewer based on evaluation results. Firms must demonstrate expertise in testing materials and conducting geotechnical assessments to aid in the planning, design, and construction of infrastructure projects across the county. All responses are due by August 11, 2026, at 4:30 PM Central Time, with the solicitation posting on July 27, 2026. Proposals should be submitted through the Texas SmartBuy portal, and inquiries may be directed to Ann Sanchez, Joy Simonton, or Kerstin Hancock at the Williamson County Purchasing Office in Georgetown, Texas.

WILLIAMSON COUNTY

POSTED

about 7 hours ago

DEADLINE

Cathodic Protection Testing ServicesLoudoun County Sanitation Authority, operating as Loudoun Water, is soliciting sealed proposals for Cathodic Protection Testing Services under solicitation number 2026-051-1400002. The procurement is governed by the Virginia Public Procurement Act and requires all offers to be submitted exclusively through the IonWave online procurement system by the deadline of September 4, 2026, at 7:00 PM Eastern Time; late submissions will not be considered. No pre-proposal conference is scheduled for this solicitation, and all necessary information must be obtained directly through the provided online portal. The contract performance will take place within the state of Virginia, and all inquiries should be directed to Kelly Bodden, the primary point of contact, via email or phone. The solicitation was posted on July 27, 2026, and no set-aside or NAICS code information is specified, indicating an open competition for qualified contractors.

POSTED

about 7 hours ago

DEADLINE

in about 1 month

M1DZ--Tri-Annual Emergency Power Supply System (EPSS) Load Test, Las Vegas VA Medical CenterThe Department of Veterans Affairs, through Network Contract Office 21, intends to award a sole source firm fixed price contract to Cummins Inc. for the tri-annual Emergency Power Supply System (EPSS) Load Test at the Las Vegas VA Medical Center, citing that Cummins is the only authorized and trained provider for Cummins Onan branded power generators. The government asserts no other third parties are qualified to perform this critical service, and therefore, no competitive solicitation is planned unless viable alternatives are demonstrated. Interested parties must submit a capability statement, their company information, and an official authorization letter from Cummins Inc. to Angela Gerlitzki at angela.gerlitzki1@va.gov no later than August 3, 2026, at 10 a.m. PST. The contract is classified under NAICS Code 541380 with a size standard of $19 million, and while responses will be reviewed, the government retains full discretion to proceed with the sole source award regardless of submissions. The work is set to occur at the Las Vegas VA Medical Center, with the contract solicitation number 36C26126Q0945 issued under the Mather, California-based office.

261-NETWORK Contract Office 21 (36C261)

POSTED

about 9 hours ago

DEADLINE

B--NEFSC DNA Next Generation SequencingThe contract encompasses the provision of next-generation DNA sequencing services for the National Oceanic and Atmospheric Administration’s Northeast Fisheries Science Center, with a base performance period from August 1, 2026, through July 31, 2027, and four optional one-year extension periods through July 31, 2031. Work is performed under a firm fixed-price structure across eight contract line items, with the primary deliverables including annual library preparation and metabarcoding of DNA extracts—300 in the base year and 350 in each option year—and Sanger sequencing of 200 samples annually. Delivery is FOB destination to the NOAA/NMFS facility in Milford, Connecticut, where government personnel will inspect and accept all work, ensuring compliance with the detailed Statement of Work, professional industry standards, and federal, state, and local regulations. Quality control protocols require BioAnalyzer or TapeStation assessments and equimolar pooling of samples, with performance evaluated using government-defined ratings of Exceptional through Unsatisfactory. The solicitation, issued under NAICS code 541380, is restricted to small business concerns including HubZone, SDVOSB, WOSB, EDWOSB, and 8(a) participants, with a size standard of $19 million in average annual receipts. Proposals must include a unique entity identifier, past performance information, technical approach, and pricing, with all submissions sent via email to the designated contracting officer by the July 28, 2026 deadline. Evaluation will follow a best-value trade-off approach, prioritizing technical approach and capability above price and past performance, without using numerical weights but applying qualitative confidence and favorability ratings. All contractors must be U.S. citizens or authorized residents, complete annual training in sexual assault and harassment prevention per NAO 202-1106, and submit invoices exclusively through the Treasury’s Invoice Processing Platform. No security clearances are required, but contractors are fully liable for damage to government property and must notify the government immediately of any schedule deviations. The total estimated value is approximately $99,000 for the base year and four option years, though no unit prices are formally listed in the contract document.

Department Of Commerce Noaa

POSTED

about 9 hours ago

DEADLINE

Pilot trials testing Laser-induced Breakdown Spectroscopy ProbesThe Department of Natural Resources Canada is seeking proposals to conduct pilot-scale testing of refractory probes designed for Laser Induced Breakdown Spectroscopy in a controlled electric arc furnace environment, with the goal of evaluating their performance, durability, and responsiveness under conditions that simulate actual steelmaking operations. The testing will be carried out using a custom-built pilot arc furnace capable of replicating the high-temperature, chemically aggressive environment of industrial steel production, ensuring that the probes are assessed under realistic and demanding operational parameters. Success in this trial will determine the viability of integrating LIBS probe technology into continuous steelmaking processes for real-time elemental analysis. Interested vendors must submit responses by the deadline of August 11, 2026, through the official Canada Buys portal, with all inquiries directed to Anik Samson, the Contracting Authority at anik.samson@nrcan-rncan.gc.ca. This solicitation, identified as NRCan-5000096476, was posted on July 27, 2026, and is open to all qualified suppliers without restriction based on set-aside categories. The work will be performed in Canada, and the results will directly inform the federal government’s strategic initiatives to modernize and optimize domestic steelmaking operations through advanced process monitoring technologies.

Department of Natural Resources (NRCan)

POSTED

about 16 hours ago

DEADLINE

Chemical Residue and Allergen Testing in and on Food Products for Canadian Food Inspection Agency (CFIA)This solicitation, numbered WS5434478581, seeks offers for analytical and laboratory services to test for chemical contaminants and allergens in food products, food crops, and tissues of food animals on behalf of the Canadian Food Inspection Agency. The requirement is structured into two distinct parts: Part A categorizes services by seven food groups—Dairy, Eggs, Fish & Seafood, Fresh Fruit & Vegetables, Honey, Meat, and Processed Products—while Part B organizes services around 24 specific testing programs such as 3-MCPD, Arsenic, BPA, Alternaria, and Benzopyrene. Offerors may respond to one or multiple food groups in Part A and/or one or more testing programs in Part B, with successful bidders receiving a single consolidated contract regardless of the number of categories or programs selected. The deadline for submission of all bids and supporting documentation is strictly 2:00 p.m. EST on September 9, 2026; any submissions received after this time will be deemed non-responsive, regardless of other平台 deadlines. Access to the full tender package requires a registered and approved SAP Ariba account linked to a verified Government of Canada profile. The solicitation is classified under NAICS code 541380 and is administered by the Government of Canada through Public Works and Government Services, with Sebastien Dupuis listed as the primary contracting authority. All submissions must be made via the CanadaBuys portal, and technical assistance for SAP Ariba access is available through the CanadaBuys Service Desk.

Department of Public Works and Government Services

POSTED

about 16 hours ago

DEADLINE

in about 1 month

Quality Inspection & Acceptance SamplingThe contract requires the performance of acceptance sampling and quality inspection services for cable assemblies in accordance with MIL-STD-1916, encompassing electrical, visual, and dimensional testing to ensure compliance with military standards. The work is classified as a subcontract under NAICS code 541380 and is being managed by the ASC Commodities Division within the Department of Defense. All inspections must be conducted at the specified place of performance in Barstow, California, with the ZIP code 92311-5015. The solicitation was posted on July 26, 2026, and responses are due by August 3, 2026, with no set-aside designation applied. Potential bidders must meet all technical and procedural requirements outlined in the referenced military standard and submit proposals through the designated DIBBS portal prior to the deadline.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Production Lot Testing (PLT) for O-Ring BatchesThe contract requires the execution of Production Lot Testing for O-ring batches to confirm compliance with military standards governing performance, durability, and packaging. Testing must be conducted in accordance with specified military specifications to ensure each batch meets rigorous operational requirements, and formal documentation of all test results and outcomes must be submitted as part of the deliverable. The work is scoped to take place in Tracy, California, with the zip code 95304-5000 designated as the place of performance. This subcontract falls under NAICS code 541380 and is issued by the Department of Defense through the LAND SUPPLY CHAIN office. The solicitation was posted on July 26, 2026, and responses are due by August 6, 2026. All testing activities must be completed and reported within the stated timeline to ensure timely validation and acceptance of the O-ring batches. The contract emphasizes adherence to precise technical benchmarks and the submission of formal, auditable reports to demonstrate full compliance with defense-related quality and reliability benchmarks.

LAND SUPPLY CHAIN

POSTED

DEADLINE

First Article Testing (FAT) ServicesThe contract requires the performance and documentation of First Article Testing for hose assemblies in accordance with FAR 52.209-3/4, encompassing material composition, dimensional accuracy, performance under operational conditions, and environmental resilience testing. All testing must be conducted with meticulous attention to specifications, and a formal, comprehensive report must be submitted to verify compliance with all required standards. The work falls under NAICS code 541380 and is structured as a subcontract under the FLUID HANDLING DIVISION of the Department of Defense, with proposals due by August 6, 2026. The testing must be completed to ensure the hose assemblies meet military-grade reliability and quality benchmarks before production or deployment.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Radioactive Materials IdentificationThe contract requires the identification and testing of radioactive materials in pump components to determine if radiation levels surpass established thresholds. If contamination is detected and exceeds acceptable limits, the contractor must apply mandatory MIL-STD-129 labeling to ensure proper handling, tracking, and compliance with military standards. This work is critical for maintaining safety and regulatory adherence within defense supply chains involving nuclear or radiological materials. The task is scoped to specific pump components and must be carried out at the designated place of performance in Suffolk, Virginia, with a zip code of 23435-5000. The contract is classified as a subcontract under NAICS code 541380, indicating it falls under the scientific and technical services category. The solicitation was posted on July 26, 2026, with bids due by August 6, 2026, and is managed by the Department of Defense’s Maritime Supply Chain ESOC Buys office, which oversees procurement activities within the defense logistics infrastructure.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

First Article Testing (FAT) ServicesThe contract requires the performance of First Article Testing on a single adapter unit compliant with MIL-DTL-24356B and FAR 52.209-3, encompassing full inspection, testing, detailed reporting, and formal submission to the government. All work must meet stringent military specifications and regulatory requirements to ensure conformity, quality, and traceability before production begins. The testing must be executed with precision to validate design, materials, and manufacturing processes against the referenced standards. This subcontract is designated as a Total Small Business Set-Aside under FAR 19.5, limiting eligibility to small businesses as defined by the SBA, and is classified under NAICS code 541380 for other scientific and technical consulting services. The performance location is specified as New Cumberland, Pennsylvania, with a zip code of 17070-5002. The solicitation was posted on July 26, 2026, and responses are due by August 6, 2026, with the contracting activity managed by the Fluid Handling Division within the Department of Defense. The opportunity is accessible through the DIBBS platform for qualified small business contractors to submit their proposals.

FLUID HANDLING DIVISION

POSTED

DEADLINE

More opportunities from Department Of Defense → FLUID HANDLING DIVISION

Same awarding agency

Cybersecurity and Controlled Unclassified Information (CUI) SafeguardingThe contract requires the implementation of robust cybersecurity measures to safeguard covered contractor information systems handling Controlled Unclassified Information, in full compliance with DFARS 252.204-7012 and the security requirements outlined in NIST SP 800-171. The scope encompasses all phases of the project, including design, testing, and delivery, ensuring that CUI is protected at every stage with defined access controls, incident reporting protocols, and system integrity safeguards. The contractor must establish and maintain a security posture aligned with federal standards to prevent unauthorized access, disclosure, or modification of sensitive data throughout the lifecycle of the work. This is a subcontract under the Department of Defense’s Fluid Handling Division, classified under NAICS code 541512 for computer systems design services. Response submissions are due by August 6, 2026, and the solicitation is posted on the DIBBS platform with the reference number SPE7M426T285N. While specific performance locations and point of contact details are not provided, the obligation to meet all CUI safeguarding requirements is mandatory and applies regardless of where the work is performed. The contract demands full adherence to NIST controls and immediate reporting of any security incidents affecting CUI, with failure to comply potentially resulting in contract termination or penalties.

Computer Systems Design Services

POSTED

DEADLINE

Hazardous Materials Compliance and LabelingAll hazardous materials must be labeled in strict accordance with OSHA’s 29 CFR 1910.1200 and the DFARS clause 252.223-7001 to ensure proper identification and handling of chemical hazards. Suppliers are required to submit hazard labels to the contracting officer if the materials are not already listed in the official inventory, ensuring full transparency and regulatory compliance. This subcontract, issued by the Department of Defense’s Fluid Handling Division under NAICS code 541690, is open for response until August 6, 2026, with performance expected to align with federal safety standards for chemical labeling across all work locations. Failure to comply with labeling requirements or to submit unlisted hazard information may result in contractual noncompliance penalties.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE

Military-Compliant Packaging and PreservationThe contract requires the packaging and preservation of hose assemblies in strict compliance with MIL-STD-2073-1E and DLA RP001 standards, ensuring all items are maintained in a clean and dry condition throughout the process. It mandates the use of AE method preservation techniques, proper palletization to safeguard integrity during transport and storage, and adherence to MIL-STD-129 labeling requirements for accurate identification and tracking. All work must meet military-grade specifications to ensure long-term readiness and operational reliability under demanding conditions. This is a subcontract opportunity issued by the Fluid Handling Division under the Department of Defense, with a response deadline of August 6, 2026, and a posting date of July 26, 2026. The NAICS code 493190 indicates the nature of the work relates to other warehousing and storage activities, though the precise location of performance is unspecified. The solicitation is accessible via a DIBBS portal link, and interested parties must submit proposals by the stated deadline to qualify for consideration under this defense-related procurement.

Other Warehousing and Storage

POSTED

DEADLINE

Nonmetallic Hose Assembly ManufacturingThe contract requires the manufacture of nonmetallic hose assemblies meeting the stringent military specification MIL-DTL-6615J, with a specific NSN of 4720002029618 and part number M6615-I-A5000P. These assemblies must include reattachable couplings and demonstrate reliable performance under low-temperature conditions, ensuring operational effectiveness in demanding environmental applications. The product must adhere strictly to the technical and quality standards outlined in the military specification to guarantee compatibility, durability, and safety in defense systems. This is a subcontract opportunity issued by the Department of Defense’s Fluid Handling Division, with a North American Industry Classification System code of 326220 for rubber and plastic product manufacturing. The solicitation was posted on July 26, 2026, and responses are due by August 6, 2026. The place of performance and point of contact details are not specified, but the official solicitation can be accessed via the DIBBS portal using the provided link. Bidders must ensure full compliance with the specification requirements and be prepared to deliver finished assemblies that are certified and traceable to the defined military standards.

Rubber and Plastics Hoses and Belting Manufacturing

POSTED

DEADLINE

Domestic and International Transportation ServicesThe contract encompasses the transportation of packaged defense components to Joint Base Elmendorf-Richardson in Alaska under FOB Origin terms, meaning the supplier is responsible for loading the goods onto the initial carrier at the point of origin, after which the risk and cost transfer to the recipient. All transportation must comply with DFARS 252.247-7023, which mandates the use of U.S.-flag vessels for ocean freight unless a formal waiver is granted, ensuring adherence to U.S. maritime regulations and national security requirements. The scope includes both domestic and international movement of these sensitive defense items, requiring careful coordination and documentation throughout the supply chain. The contract is categorized as a subcontract with a NAICS code of 483112, indicating it relates to truck transportation for remittance purposes, though it may involve multimodal logistics including ocean and land segments. The solicitation was posted on July 26, 2026, with responses due by August 6, 2026, and is issued by the Fluid Handling Division under the Department of Defense. The performance location is clearly designated as JBER, AK with a ZIP code of 99505-0000, and all logistics must be planned to meet the timeline and regulatory constraints inherent to defense logistics, particularly those governed by federal acquisition regulations.

Deep Sea Passenger Transportation

POSTED

DEADLINE

Military-Compliant Packaging and Marking ServicesThe contract requires the provision of packaging and marking services for defense components strictly aligned with military standards including MIL-STD-2073-1E for packaging, MIL-B-117 for material handling, and MIL-STD-129 for labeling, with full compliance in the generation of associated documentation and labels. All work must be executed to ensure the integrity, traceability, and readiness of defense materiel through standardized procedures that meet U.S. Department of Defense regulations. The services are subcontracted under the NAICS code 323111 and must be performed at the designated location in JBER, Alaska, with a ZIP code of 99505-0000. The contract is issued by the Fluid Handling Division under the Department of Defense and is solicited as a subcontract with no set-aside classification. Responses are due by August 6, 2026, and the solicitation was posted on July 26, 2026, with further details available through the official DIBBS portal.

Commercial Printing (except Screen and Books)

POSTED

DEADLINE

Precision Metal Tube Assembly ManufacturingThe contract requires the manufacture of a precision metal tube assembly with a 1.625-inch outer diameter and a 0.049-inch wall thickness, engineered to meet stringent DLA technical specifications. Production must adhere to MIL-STD-2073-1E for packaging and MIL-STD-129 for labeling, ensuring compliance with defense logistics standards. The quality system must be certified to AS9003 and ISO 9001, affirming rigorous control over material selection, dimensional accuracy, and process consistency throughout fabrication. Performance is designated for JBER, Alaska, with the final product expected to support mission-critical fluid handling systems under Department of Defense oversight. The opportunity is structured as a subcontract under NAICS code 332996 and was posted on July 26, 2026, with a response deadline of August 6, 2026. No set-aside designation or organization type is specified, leaving eligibility open to qualified subcontractors capable of meeting the technical, packaging, and quality requirements. All proposals must be submitted through the DIBBS platform using the provided solicitation link, and adherence to the exact dimensional and regulatory criteria is mandatory for consideration. Failure to comply with any specification will result in disqualification.

Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

DEADLINE

Technical Data Package (TDP) & CDRL SupportThe contract requires the development and submission of comprehensive Technical Data Packages and Contract Data Requirements List documentation in alignment with Defense Logistics Agency standards and applicable referenced specifications. This includes producing detailed engineering drawings, process flow diagrams, and quality assurance plans to ensure full compliance with technical and procedural requirements. All deliverables must adhere to the defined DLA protocols and be structured to support operational readiness and verification for defense-related fluid handling systems. The solicitation is designated as a Total Small Business Set-Aside under SBA regulations, with NAICS code 541330 indicating it falls under Engineering Services. The place of performance is established at New Cumberland, Pennsylvania, with a response deadline of August 6, 2026. The contracting office operates under the Department of Defense’s Fluid Handling Division, and all work must be executed to meet exacting defense standards with no flexibility in documentation format or content. Submission must occur through the DIBBS portal prior to the specified deadline to be considered eligible.

Engineering Services

POSTED

DEADLINE

MIL-STD-2073-1E & MIL-STD-129 Packaging and Marking ServicesThe contract requires full compliance with MIL-STD-2073-1E for packaging and preservation of 177 units, ensuring that all items are protected for long-term storage and transportation under military standards. Each unit must be properly preserved using approved methods to prevent corrosion, contamination, and damage, and must be packaged in a manner that meets stringent military specifications for handling, stacking, and environmental resilience. Additionally, MIL-STD-129 labeling is mandatory, requiring GS1-128 and Data Matrix barcodes for accurate and automated tracking throughout the supply chain. All packaging must adhere to DLA palletization standards, including proper load distribution, securing methods, and labeling of pallets with required identification data. The solicitation is structured as a subcontract under a Total Small Business Set-Aside, exclusive to small businesses as defined by the SBA, with a NAICS code of 493190 indicating warehousing and storage services. The offeror must respond by August 6, 2026, and performance is designated to occur in New Cumberland, Pennsylvania, with a zip code of 17070-5002. The contracting activity falls under the Department of Defense’s Fluid Handling Division, and while specific point of contact information is not provided, all submissions and inquiries should be directed via the linked DIBBS portal. Compliance with every technical and procedural requirement is non-negotiable, and failure to meet exact packaging, marking, or palletization criteria may result in rejection of deliverables.

Other Warehousing and Storage

POSTED

DEADLINE

Precision Machined Adapter Manufacturing (Pipe-to-Hose & Flange-to-Hose)The contract calls for the manufacture of 177 precision-machined straight adapters designed to connect pipe-to-hose and flange-to-hose configurations in military fluid handling systems, strictly adhering to the MIL-DTL-24356B specification. Each component must meet exacting dimensional tolerances, material composition standards, and performance criteria to ensure reliability and safety in defense applications. The work is classified as a total small business set-aside under the SBA program, restricted to small businesses as defined by the North American Industry Classification System code 332710, which covers metal forging and stamping. The performance location is designated as New Cumberland, Pennsylvania, with a zip code of 17070-5002, indicating where the manufactured parts must be delivered and potentially inspected. The solicitation was posted on July 26, 2026, and responses are required by August 6, 2026, allowing a ten-day window for interested small businesses to submit proposals under this subcontract opportunity issued by the Department of Defense’s Fluid Handling Division.

POSTED

DEADLINE