Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

First Stage Cylinder Liner Repair/Replacement

Active

Federal

Response Deadline08/13/2026, 06:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract calls for the repair or replacement of the first stage cylinder liner with part number 37560927 for a high-pressure air compressor, encompassing full operational procedures including disassembly, thorough inspection, precision machining, reassembly, and rigorous testing to ensure performance and safety standards are met. All work must be performed to meet military-grade specifications and maintain the integrity of the compressor system under high-pressure operational conditions. This subcontract is managed by the Southwest Regional Maintenance Center under the Department of Defense, with performance required at the location in San Diego, California, specifically at zip code 92136. The solicitation was posted on July 24, 2026, and responses must be submitted no later than August 13, 2026, at 6:00 PM. The North American Industry Classification System code 332994 applies, indicating the work falls under other fabricated metal product manufacturing, and the effort supports critical defense infrastructure requiring specialized technical expertise and compliance with federal maintenance protocols.

General Info

Repair or replace first stage cylinder liner per military specs at San Diego by August 13, 2026.

Agency

Department Of Defense → Southwest Regional Maintenance CenterView Agency

NAICS

332994 - Small Arms, Ordnance, and Ordnance Accessories ManufacturingView NAICS

Place of Performance

San Diego, CA, 92136, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 24

subcontract

Response DeadlineAug 13

Submission deadline

Response Deadline

08/13/2026, 06:00:00 PM UTCin 20 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Southwest Regional Maintenance Center

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Southwest Regional Maintenance Center

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Repair or replacement of the first stage cylinder liner (P/N: 37560927) for a high-pressure air compressor, including disassembly, inspection, machining, reassembly, and testing.

Similar Contracts

Same NAICS industry code

MOUNT, RESILIENT, WEAPONThe contract pertains to the procurement of 306 units of a MOUNT, RESILIENT, WEAPON SYSTEM with NSN 5342013535216 and part number 2HL527 supplied by OSHKOSH DEFENSE LLC. The item is classified as a TYPE I (CODE Z) shelf-life item with a non-extendable shelf life of 240 months, requiring strict compliance with shelf-life requirements and packaging standards as defined by MIL-STD-2073-1E and DLA packaging guidelines. All units must be packaged and marked according to MIL-STD-129 with the special marking code 32 indicating shelf-life management. Delivery is set for 168 days after contract award with FOB origin terms, inspection and acceptance occurring at the destination, and no variance is permitted in quantity. The delivery address is DLA Distribution Red River in Texarkana, TX, with a required ship date of January 5, 2027, and original delivery deadline of June 12, 2027. The solicitation number is SPE7L5-26-T-4354, issued under the Department of Defense with a NAICS code of 332994, and was posted on July 9, 2026, with a response deadline of July 20, 2026. The contract incorporates all applicable technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, with the controlling revision determined by the solicitation issue date for simplified acquisitions. Transportation and freight instructions are governed by DLAD Proc Notes C19 and C20. The unit of issue is each, with a total price of $92,658.00 at $306.00 per unit, and all documentation, marking, and delivery must fully conform to the specified DLA and DoD standards without deviation.

LAND SUPPLIER OPNS ENGINES

POSTED

about 13 hours ago

DEADLINE

CARRIAGE, HOWITZERThe contract pertains to the procurement of 22 units of a Howitzer Carriage identified by NSN 1015-00-616-7318, with a delivery timeline of 154 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for large acquisitions or the award date for simplified acquisitions. The item is classified as a Category I munitions item requiring demilitarization, and its technical data is subject to export controls under ITAR or EAR, necessitating strict compliance with DFARS 252.225-7048. Access to controlled technical data is limited to contractors with approved US/Canada Joint Certification Program status, completed training on handling DOD export-controlled data, and prior authorization from DLA. Cybersecurity compliance mandates CMMC Level 2, either through self-assessment or certification by an accredited third-party assessor. Quality assurance includes tailored higher-level requirements, inspection and acceptance at origin, configuration change management via engineering change proposals, and adherence to Qualified Products or Manufacturers Lists where applicable. Items must be physically marked according to specified standards, and unauthorized government identification must be removed from non-accepted supplies. Packaging must meet DLA standards, and while unique item identification is not required, DFARS 252.211-7003 applies. The contract is issued under solicitation SPE7L7-26-Q-2062 by the Department of Defense’s New Cumberland facility, with Charles Duncan as the point of contact.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 13 hours ago

DEADLINE

GUARD, HAND, GUNThe contract calls for the supply of nine guard, hand, gun units identified by NSN 1005-00-856-2108, with delivery required within 66 days after award. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. The item is classified as a Category I munitions item under DoD 4160.28 Volume 3, requiring demilitarization upon disposal. Export control restrictions apply due to technical data subject to ITAR or EAR, prohibiting unauthorized disclosure to foreign persons, including foreign nationals employed by U.S. companies, and mandating compliance with DFARS 252.225-7048. Access to controlled data is restricted to contractors with approved US/Canada Joint Certification Program certification, completed DLA export control training, and formal authorization from DLA. The contractor must adhere to DLA packaging standards, implement tailored higher-level quality requirements, manage configuration changes via engineering change proposals or variance requests, and ensure components originate from qualified products or manufacturers listed per procurement note H02. Inspection and acceptance occur at the origin, and government identification must be removed from non-accepted items. Cybersecurity compliance requires a CMMC Level 2 self-assessment or certification by a C3PAO. Item Unique Identification is waived per the service customer’s request, in accordance with DFARS 252.211-7003. The solicitation was issued on July 24, 2026, with responses due by August 3, 2026, and performance is directed to New Cumberland, Pennsylvania.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 13 hours ago

DEADLINE

LEG, MACHINE GUN BIPThe contract specifies the procurement of one unit of a left-hand machine gun bipod leg, identified by NSN 1005-00-608-5020, with a delivery deadline of 155 days after contract award. Manufacturing must utilize a metal casting process requiring specialized tooling, and sourcing inquiries must be directed to DLA’s Aviation or Land & Maritime Supply Chains. The item is classified as a Category I munitions part under DoD directives, necessitating demilitarization procedures upon disposal. It is subject to stringent quality controls including tailored higher-level contract requirements, configuration change management through engineering change proposals, inspection and acceptance at origin, and mandatory qualification of components via Qualified Products Lists or Qualified Manufacturers Lists. Technical data associated with the item is controlled under ITAR or EAR regulations, restricting disclosure to foreign persons and requiring compliance with DFARS 252.225-7048; only contractors with approved U.S./Canada Joint Certification Program status, completed DOD export training, and DLA authorization may access controlled data. Packaging must meet DLA standards, government identification must be removed from non-accepted items, and solicitation compliance is governed by the version of the DLA Master List of Technical and Quality Requirements in effect on the relevant date. The solicitation number is SPE7L7-26-Q-2059, with a response deadline of August 3, 2026, and primary point of contact is Charles Duncan at the Defense Logistics Agency.

Defense Logistics Agency

POSTED

about 13 hours ago

DEADLINE

Hydraulic System Integration and TestingThe contract pertains to the integration of a mulcher with hydraulic systems, requiring comprehensive flow compatibility testing, precise pressure calibration, and full performance validation to ensure operational reliability under field conditions. The work must be performed at Twentynine Palms, California, with all technical activities aligned to meet military-grade standards for equipment functionality and safety. The contractor is expected to demonstrate proven expertise in hydraulic system design and field testing, with deliverables focused on verified performance metrics and documented test results. This is a total small business set-aside under the SBA program, classified under NAICS code 332994, and structured as a subcontract within the Department of Defense acquisition framework. The opportunity was posted on July 24, 2026, with responses due by July 29, 2026, allowing a five-day window for qualified small businesses to submit proposals. The commanding general's office is managing the solicitation, and while no point of contact is listed, submissions must adhere strictly to the deadline and performance requirements outlined in the solicitation context. All work must comply with federal contracting regulations and be executed within the specified geographic location.

Commanding General

POSTED

about 18 hours ago

DEADLINE

Propane Cannon System Supply and IntegrationThe contract entails the supply and integration of 26 complete bird propane cannon systems, each comprising the cannon unit, mounting hardware, control unit, proprietary software, cabling, and all necessary integration components to ensure full operational capability. These systems are designed for avian deterrent use and must be delivered in a ready-to-deploy configuration, fully tested and compliant with performance specifications. The contract is classified as a subcontract under NAICS code 332994, indicating it involves other fabricated metal product manufacturing, and is issued by the Naval Supply Systems Command Fleet Logistics Center Sigonella Naples Office under the Department of Defense. Responses are due by 9:00 AM on July 28, 2026, following a posting date of July 24, 2026, with performance to occur at the Sigonella location. The requirement is focused on delivery and integration without specifying set-aside status, and all components must be compatible with existing infrastructure and operational environments at the site. No point of contact is listed in the provided details, and the contract is accessible via the SAM.gov portal for potential bidders seeking to submit proposals.

Navsup Flc Sigonella Naples Office

POSTED

about 18 hours ago

DEADLINE

SPRDL1-24-R-0189_0007 Receiver, Cartridge

DLA Land Warren

POSTED

about 18 hours ago

DEADLINE

FIXTURE,GUN ASSEMBLThis contract pertains to the procurement of the FIXTURE, GUN ASSEMBL under solicitation SPRMM126QKG32, issued by the Defense Logistics Agency (DLA) Mechanicsburg. All contractual documents are deemed issued upon electronic transmission or mailing, and award will be based on the Lowest Price Technically Acceptable (LPTA) criteria. The item must conform to specified military standards including MIL-STD-130 Revision N for marking, and packaging must comply with MIL-STD-2073. The contractor is responsible for all inspection activities as detailed in the contract, with records required to be maintained for 365 days after final delivery. The contractor must be an authorized distributor of the original equipment manufacturer, and refurbished materials are strictly prohibited. Traceability to the OEM is mandatory, requiring the provision of the CAGE code and part number for any non-manufactured items. Electronic submission of invoices and receiving reports via the Wide Area Workflow (WAWF) system is required, and contractors must register for the Procurement Integrated Enterprise Environment (PIEE) Electronic Data Access (EDA) to view orders. Compliance with the Cybersecurity Maturity Model Certification (CMMC) Level 1 is mandatory, and the Federal Acquisition Supply Chain Security Act prohibitions apply. Any changes to the design, material, or part number require prior written approval from the Contracting Officer, with specific change codes to be applied and justification submitted. The performance facility cannot be altered without government approval, and administrative fees of $250 apply for any approved changes. Documentation required for performance must be obtained from authorized sources, and distribution of technical data is governed by seven code-based distribution statements, with strict controls on access. Contact information for contract-related communications must be provided, and vendors are encouraged to register with NAVSUP WSS to receive automated notifications regarding contract actions.

SPRMM1 DLA Mechanicsburg

POSTED

about 18 hours ago

DEADLINE

in about 1 month

BOAST RFOP M11 Pistol Small Arms Storage Rack NSN 1095-00-897-8755

Department Of The Army

POSTED

about 18 hours ago

DEADLINE

in about 1 month

FEEDER,AMMUNITION,MThis contract pertains to the repair of the FEEDER, AMMUNITION, M under Emergency Acquisition Authority, with a required Repair Turnaround Time of 881 days measured from the physical receipt of the asset at the contractor’s facility as recorded in the Commercial Asset Visibility system. All pricing is firm-fixed-price, and contractors must quote the full cost of repair including handling of damaged, incomplete, or worn components, with no allowances for estimated or not-to-exceed terms. The Government requires strict adherence to MIL-STD-130 for item marking and mandates compliance with the original manufacturer’s specifications and technical directives, using the CAGE code 53711 and reference number 6736534. Inspection and acceptance are conducted by Government Source Inspection, and all records must be retained for 365 days post-delivery. Freight is FOB Origin, with handling governed by the Navy under the CAV Statement of Work. Contractors must prove they are authorized distributors of the original manufacturer and submit documentation if pricing differs from historical or commercial rates. The contract incorporates numerous mandatory clauses including cybersecurity maturity certification, safeguarding of conventional arms and explosives, Buy American requirements, Small Business Subcontracting Plan obligations, and Security Prohibitions and Exclusions under recent Deviations. Use of Workflow Pro (WFP) Mod Assist is required, and all submissions must conform to Navy-specific administrative protocols, including the use of Wide Area Workflow for payment and invoice processing. The solicitation prohibits substitutions or design changes without prior written approval, and any items deemed beyond repair require separate testing and evaluation fees to be justified. Performance locations, inspection CAGE codes, and awardee details must be provided, and contractors must compare their repair price against the current new unit price and lead time. All documentation must comply with distribution statements per OPNAVINST 5510.1, and responses must be submitted through the specified portal by the August 24, 2026 deadline, with bilateral acceptance required prior to contract execution.

Navsup Weapon Systems Support Mech

POSTED

about 18 hours ago

DEADLINE

in about 1 month

Birds cannon systemThe Navy is seeking to procure a new Bird Propane Cannon system to replace an aging setup, requiring a complete installation of 26 fully functional cannons equipped with all necessary mounting hardware, a central control unit, specialized software, and all required cabling and ancillary components to ensure seamless operation. The solicitation, identified as N6817126QS015, is issued by the Naval Supply Systems Command Fleet Logistics Center Sigonella Naples Office under the Department of Defense, targeting improved bird control at the Sigonella, Catania location in support of military operations and infrastructure protection. Proposals must be submitted by the deadline of July 28, 2026, at 9:00 a.m., with inquiries directed to the primary point of contact, Luciano Giuffrida, or the secondary contact, Brent Robinson, via their respective Navy email addresses. The opportunity falls under NAICS code 332994 for other fabricated metal product manufacturing, reflecting the specialized nature of the equipment. The contract will be executed by a U.S. government office located in FPO, AE, with performance taking place entirely at the Sigonella base, requiring vendors to ensure logistical readiness for delivery and installation in a deployed military environment.

Navsup Flc Sigonella Naples Office

POSTED

about 18 hours ago

DEADLINE

Pituffik InVeris Training Solutions, Inc. FATS 100MIL Firearms SimulatorThis contract is for the exclusive procurement of the InVeris Training Solutions, Inc. FATS 100MIL Firearms Simulator System under a non-competitive acquisition authorized under RFO 12.102(b), limiting participation to quotations for this specific branded system only, with a Justification and Approval document supporting the sole-source determination. The requirement covers all components, delivery, installation, and warranty under CLIN 0001, with quoted prices required to be firm-fixed and inclusive of all associated costs. The system is destined for Pituffik Space Base, located approximately 750 miles north of the Arctic Circle, where access is restricted to air and sealift transport coordinated through the 821st SPTS/LG, and no road or rail access exists. Personnel traveling to the base must hold a valid passport for entry into the Kingdom of Denmark and must arrange military transport coordination through the 821st SBG. All inquiries must be submitted by 4 August 2026, and quotations are due by 5:00 PM Central European Time on 21 August 2026, remaining valid through 30 September 2026 at a minimum. The solicitation number is FA252326Q0001, posted on 24 July 2026, and is managed by the Department of Defense’s 21 Cons FA2523 Detachment 1 based in DPO, AE, with primary point of contact Andrew Lucas and secondary contact Rene Streander available for coordination.

21 Cons FA2523 Detachment 1

POSTED

about 18 hours ago

DEADLINE

More opportunities from Department Of Defense → Southwest Regional Maintenance Center

Same awarding agency

Packaging, Marking, and Preservation ServicesThe contract requires the provision of compliant packaging, preservation, and labeling services for repaired components destined for the Southwest Regional Maintenance Center in San Diego, California. All packaging and labeling must strictly adhere to NAVSEA standards to ensure the integrity and traceability of components during transit and storage. Each shipment must include a detailed itemized packing list that accurately reflects the contents, enabling seamless receipt, verification, and inventory management at the destination facility. Performance is expected to be conducted in full compliance with federal and military logistics protocols, with an emphasis on environmental protection, corrosion prevention, and secure handling of sensitive or mission-critical components. The contract is classified as a subcontract under NAICS code 561910, and responses are due by August 13, 2026. The place of performance is located in San Diego with a zip code of 92136, and all work must align with the expectations set by the Department of Defense through the Southwest Regional Maintenance Center.

Packaging and Labeling Services

POSTED

about 18 hours ago

DEADLINE

Third Stage Piston Ring Set Supply/InstallationThe contract pertains to the supply and/or replacement of the third stage piston ring set with part number 1W139489 for a high-pressure air compressor, encompassing full service delivery from inspection through installation and final performance verification. The work is required to ensure the compressor operates at optimal efficiency and safety standards, with all components meeting strict military-grade specifications. The effort is classified as a subcontract and falls under NAICS code 332996, indicating it involves other fabricated metal product manufacturing activities tied to precision mechanical components. Performance of the work must occur at the designated location in San Diego, California, with a zip code of 92136, under the oversight of the Southwest Regional Maintenance Center, a division of the Department of Defense. The solicitation was posted on July 24, 2026, and responses must be submitted no later than August 13, 2026, at 6:00 PM local time. While no set-aside designation or specific agency contact information is provided, the contract is actively open for eligible subcontractors seeking to support critical defense maintenance operations. All bidders are expected to demonstrate technical capability, quality assurance protocols, and experience with military-grade compressor systems to meet the operational demands of the DoD. The work must be completed in accordance with the specified technical requirements, and verification of post-installation performance is mandatory to confirm system integrity and service life extension.

Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 18 hours ago

DEADLINE

Fourth Stage Piston Seal Set Supply/InstallationThe contract encompasses the supply and installation of a piston seal set with part number ML12522256G1 for the fourth stage of a high-pressure air compressor, requiring precise seal fitment, comprehensive leak testing, and seamless integration into the existing system. All work must meet stringent performance and reliability standards critical to the operational integrity of the compressor, ensuring optimal pressure retention and long-term durability under high-stress conditions. The task involves not only delivering the correct seal components but also executing the installation with certified procedures and verifying system performance through rigorous testing protocols. The contract is designated as a subcontract under NAICS code 326220 and is managed by the Southwest Regional Maintenance Center under the Department of Defense. The work is to be performed in San Diego, California, with a response deadline of August 13, 2026, at 6:00 PM. The solicitation was posted on July 24, 2026, and no set-aside provisions apply, meaning all qualified vendors may submit proposals. The facility is responsible for maintaining full traceability of parts and documentation throughout the installation process to ensure compliance with defense procurement standards and to support future maintenance and audit requirements.

Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 18 hours ago

DEADLINE

Second Stage Piston Rings Supply/InstallationThe contract pertains to the supply and/or installation of second stage piston rings with part number 1W139488 for high-pressure air compressors, encompassing full fitment, compression testing, and seamless integration into existing systems. Work must be executed to meet stringent operational standards for military-grade equipment, ensuring reliability under demanding conditions. Performance is required at the designated location in San Diego, California, with a zip code of 92136, and is categorized under NAICS code 332996 for other fabricated metal product manufacturing. This is a subcontract opportunity issued by the Southwest Regional Maintenance Center under the Department of Defense, with proposals due by August 13, 2026, at 6:00 p.m. The solicitation was posted on July 24, 2026, and interested parties must respond within the specified window to be considered for award.

Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 18 hours ago

DEADLINE

N5523626Q0092 -USS STETHEM (DDG-63) HPAC COMPThe U.S. Navy’s Southwest Regional Maintenance Center is soliciting a sole-source quotation for repair components to support the Curtis-Wright HPAC Model N20NL-12A/B onboard the USS STETHEM (DDG-63) at Naval Base San Diego, under the authority of FAR 12.102(a) and FAR 6.103-1(b), which justify acquisition from a single source as the Original Equipment Manufacturer. This procurement, classified under NAICS code 333912 (Air and Gas Compressor Manufacturing), follows commercial item procedures under FAR Part 12 and incorporates all applicable provisions and clauses effective through Federal Acquisition Circular 2026-01 and DFARS Publication Notice 20260702. The solicitation explicitly prohibits competitive bidding and requires the offeror to provide detailed pricing, availability, and delivery timelines consistent with the specified Product Description. Quotes must be submitted via email to two designated Navy procurement representatives no later than 13 August 2026 at 11:00 AM Pacific Time, with late submissions disqualified. Evaluation will follow a Lowest Price Technically Acceptable (LPTA) approach, prioritizing technical acceptability—specifically the ability to meet the Required Delivery Date with preference given to shorter lead times—followed by price reasonableness and past performance as assessed through the Supplier Performance Risk System. All offers must comply with FAR and DFARS clauses related to commercial items, including warranties, packaging standards, F.O.B. Destination terms, and government inspection at the point of delivery. Offerors are required to maintain current representations and certifications in the System for Award Management (SAM) or complete applicable sections of FAR 52.212-3. Numerous security, labor, environmental, and compliance clauses apply, including those governing cybersecurity, anti-trafficking, Buy American requirements, export controls, and prohibitions on certain telecommunications equipment. Failure to submit complete documentation or meet submission deadlines will result in disqualification, with no alternative solicitation to be issued.

Air and Gas Compressor Manufacturing

POSTED

about 18 hours ago

DEADLINE

N5523626Q0104 - USS PAUL HAMILTON (DDG-60) HPAC COMPThis solicitation, N5523626Q0104, is a sole-source combined synopsis and solicitation issued by the Southwest Regional Maintenance Center under FAR Part 12 for commercial items required to repair the Curtis-Wright HPAC Model N20NL-12A/B aboard the USS PAUL HAMILTON (DDG-60) at Naval Base San Diego. The procured components are exclusively for the original equipment manufacturer, with no competitive bidding permitted under FAR 6.102-1(b), and the North American Industry Classification System code is 333912 for air and gas compressor manufacturing. All quotes must include product availability, delivery date, and price, with delivery terms specifying F.O.B. Destination, meaning inspection and acceptance occur upon arrival at the Navy facility. The government will evaluate offers using a lowest price technically acceptable (LPTA) approach, prioritizing vendors who can meet the required delivery date starting from the projected award date of August 13, 2026, with price considered second among technically acceptable responses. Past performance will be assessed using the Supplier Performance Risk System. The solicitation incorporates numerous far and dfars provisions and clauses, including those mandating compliance with Buy American Act requirements, cybersecurity maturity model certification, anti-trafficking policies, labor standards exemptions, warranty notifications, identification marking, environmental restrictions including mercury exclusion, and electronic invoicing through the System for Award Management. Offerors must validate their SAM registration, submit all required certifications in accordance with FAR 52.212-3, and ensure all proposals are received via email by August 13, 2026, at 11:00 AM Pacific time, with questions due no later than July 30, 2026, directed to Edward Condreay and Jorge Morales. No formal written solicitation will be issued beyond this announcement.

Air and Gas Compressor Manufacturing

POSTED

about 18 hours ago

DEADLINE

Marine Boatyard Support and Industrial Support Lot III Follow-on MAC-IDIQThe Marine Boatyard Support and Industrial Support Lot III Follow-on MAC-IDIQ solicitation, identified by number N5523626R0016, is a total small business set-aside under FAR 19.5, targeting NAICS code 336611 for ship repair and maintenance services. The solicitation, issued by the Southwest Regional Maintenance Center under the Department of Defense, is open for responses until August 7, 2026, with proposals to be submitted to the updated email address 410B_RFP_26R0016_MBS_LOT_III@us.navy.mil, replacing the prior contact. Amendments have been made to update the RFP number from N5523625R0013 to N5523626R0016, specifically revising Sections C, J, and L to reflect correct referencing and administrative details, while all other contract terms and conditions remain unaltered. The primary point of contact is Natalie Arenz, with secondary support from Alondra Moreno, both located at the Southwest Regional Maintenance Center in San Diego, California, with a place of performance also designated in the same location.

Ship Building and Repairing

POSTED

DEADLINE

WELDER TRAINING FOR DIVERSThis solicitation, N5523626Q0083, is a total small business set-aside under FAR Part 12 for the procurement of a welder training course for divers at the Southwest Regional Maintenance Center in San Diego, California. The requirement is for a four-week intensive program covering AWS-approved welding processes including Shielded Metal Arc Welding (SMAW), Gas Metal Arc Welding (GMAW-S Short Circuit), GMAW Spray Transfer, and Flux Cored Arc Welding (FCAW), with training for up to four students. The training must be accredited by the American Welding Society and include an AWS Welding Test leading to qualification. The preferred period of performance is June 15, 2026, through September 30, 2026, and quotation responses must meet this timeline as a mandatory pass/fail criterion. In addition to training, the contractor must provide consumables such as welding rod and project plates per student, and personal protective equipment at $100 per student if not supplied by the student. The solicitation is open only to small businesses certified under NAICS code 611519 with a size standard of $21 million, and large business submissions are ineligible. Offerors must be registered in the System for Award Management (SAM) and submit quotes via email to designated Navy personnel no later than June 10, 2026, at 11:00 AM Pacific Time, with the solicitation number included in the subject line. All quotes must hold prices firm for 60 days and include required representations, the Unique Entity Identifier, and EFT information. The evaluation will follow a Lowest Price Technically Acceptable (LPTA) methodology, where technical acceptability is determined by meeting the period of performance and accreditation requirements, with price assessed for reasonableness under FAR 12.203. Past performance will be evaluated using the Supplier Performance Risk System. The contract incorporates numerous standard FAR and DFARS clauses, including those related to small business representation, subcontracting limits, labor standards, child labor, equal opportunity, combating human trafficking, minimum wage compliance, cybersecurity, and payment procedures via electronic funds transfer. Contract administration is governed by NAVSEA instructions for payment, invoicing, and point of contact responsibilities. The government will conduct inspections and accept the training deliverables at the place of performance, and award will be made without negotiations based on the initial offer. Additional

Other Technical and Trade Schools

POSTED

DEADLINE

Marine Boatyard Support and Industrial Support Lot II Follow-on MAC-IDIQThe Southwest Regional Maintenance Center is soliciting proposals under solicitation N5523625R0012 for Marine Boatyard Support and Industrial Support Lot II, a follow-on multiple award indefinite delivery/indefinite quantity contract with a five-year performance period comprising five annual ordering periods. The contract supports the repair, modification, upgrade, service life extension, and maintenance of non-commissioned vessels and equipment measuring 15 meters or 50 feet and longer, including boats, crafts, lighterage, habitability barges, service crafts, and ancillary support gear such as brows, platforms, and loading ramps, as well as smaller items requiring waterway delivery. Work includes dry-docking and dry-berthing at contractor facilities within a 125-mile radius of Naval Base San Diego, California, along with hull preservation, habitability conversions, and system upgrades for all related equipment and infrastructure. The Government will award contracts based on best-value determinations considering past performance, technical capability, and price, under FAR, DFARS, and NMCARS guidelines. Only small businesses with 1,300 or fewer employees, as defined by NAICS code 336611, are eligible, and all offerors must be registered in SAM and the PIEE Solicitation Module. A qualified quality system compliant with NAVSEA Standard Item 009-04 is mandatory at time of award. The RFP response deadline is July 30, 2026, and all awards will be issued as supply contracts resulting in mission-ready assets returned to fleet service.

Ship Building and Repairing

POSTED

DEADLINE

Project Management and Technical OversightThe contract calls for comprehensive project management and technical oversight during a planned overhaul, with strict requirements to meet Navy standards, maintain a six-week completion timeline, and ensure seamless coordination with government personnel. The work is centered on providing expert supervision to guarantee schedule adherence and technical compliance throughout the duration of the project, focusing on efficiency and regulatory alignment. The scope is tied to a subcontract under the Department of Defense, managed by the Southwest Regional Maintenance Center, with all activities to be performed at the designated location in San Diego, zip code 92136. The NAICS code 541611 indicates that the services fall under management consulting activities, specifically emphasizing administrative management and oversight functions. The contract was posted on May 12, 2026, and while no solicitation number or set-aside details are provided, the emphasis remains on precise execution, accountability, and direct support to federal operations.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Technical Support for Aft Electronic Systems CoolingThis contract requires comprehensive engineering and technical support to maintain reliable thermal control for aft-mounted electronic systems during and after the AC plant overhaul at the Southwest Regional Maintenance Center in San Diego. The scope includes verifying thermal loads, integrating cooling systems with existing electronic architectures, and validating performance under operational conditions to ensure systems remain within safe temperature thresholds. All work must adhere to rigorous military standards to guarantee system reliability during and post-overhaul operations. The contract is classified as a subcontract under NAICS code 541330 for engineering services and is tied to a Department of Defense facility. Performance is localized exclusively at the San Diego site with ZIP code 92136, and the work is scheduled to be performed following a posting date of May 12, 2026. No set-aside provisions or solicitation number are specified, and no point of contact information is provided, indicating the contract may be awarded through an existing contractual relationship or internal procurement channel. Deliverables must ensure continued operational readiness of critical aft-mounted electronics under demanding environmental conditions.

Engineering Services

POSTED

DEADLINE

Marine HVAC System Overhaul and RepairThe contract calls for a complete Class B overhaul of the ship’s Number 4 Air Conditioning Plant, encompassing full disassembly, detailed inspection, repair or replacement of any failed components, and precise reassembly to restore full operational capability. The work is specifically focused on ensuring the system regains its intended cooling capacity to support aft electronic systems and maintain crew habitability, with rigorous testing and operational verification required to confirm performance meets all operational standards. The overhaul must be executed to meet naval maintenance specifications, ensuring reliability and durability under marine operating conditions. This subcontract is managed by the Southwest Regional Maintenance Center under the Department of Defense, with performance designated to occur in San Diego, California, at the 92136 ZIP code location. The work falls under NAICS code 333414, which pertains to HVAC equipment manufacturing and repair services, indicating the technical scope requires specialized knowledge in marine environmental control systems. The solicitation was posted on May 12, 2026, and while no set-aside designation or point of contact is provided, the contract is structured as a subcontract and is tied to the broader defense maintenance infrastructure supporting ship readiness and fleet sustainment.

Heating Equipment (except Warm Air Furnaces) Manufacturing

POSTED

DEADLINE