FLANGE, PIPE
Contract Overview
Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.
AI Contract Overview
The contract is for the procurement of 165 units of a 2-inch nominal pipe flange made of bronze material, rated at 150 lb. class, with bolt holes arranged on a 4-3/4 inch bolt hole circle, intended for naval applications. Each flange must be manufactured with silver-brazing alloy rings conforming to QQ-B-654 Grade III, which are to be packaged separately and not inserted into the flange groove. The product must strictly comply with all applicable technical and quality requirements from the DLA Master List, and no mercury or mercury-containing compounds are permitted in the product, its preservation, packaging, packing, or marking, except for certain exempted applications such as batteries, sensors, or instruments specified by NAVSEA; portable instruments containing mercury must include a secondary containment boundary. Ozone-depleting chemicals are prohibited, and all substitute chemicals must be submitted for approval unless explicitly authorized. The flange is identified by NSN 4730-00-252-3508 and part number CS4730-0024-2IN, and production must follow revision E of the detailed drawing dated 09/21/1982. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, with preservation performed using dry methods, no preservation materials, and clean, dry conditions; packaging code U indicates unit packaging, and no special marking is required. Palletization must follow DLA Packaging Requirements RP001, and the delivery must be FOB origin with a requirement to deliver within 123 days after the delivery order, with a target delivery date of November 7, 2025. Inspection and acceptance occur at the destination, with sampling governed by MIL-STD-1916 or equivalent zero-based sampling plans requiring zero non-conformances unless otherwise specified. The contract mandates WAWF for invoicing and is subject to a range of Federal Acquisition Regulation clauses including those on hazardous materials identification, employment eligibility, trafficking in persons, sustainable products, and compliance with NIST SP 800-171 for cybersecurity. The contractor must maintain current UEI and CAGE codes, and if claiming small business status, must provide accurate socioeconomic certifications. Delivery is to the DLA Distribution facility in New Cumberland, PA, and full and open competition applies with no set-aside designation.
General Info
Agency
NAICS
Place of Performance
2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, USSet-Aside
Timeline
Response Deadline
Organization & Contact Information
Full Description
FLANGE, PIPE. BRONZE MATERIAL, 150 LB. CLASS,
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
2 INCH NOMINAL PIPE SIZE, WITH BOLT HOLES,
4-3/4 IN.BOLT HOLE CIRCLE.E/I NAVAL APPLICATIONS
ALL FLANGES TO HAVE SILVER-BRAZING ALLOY
RINGS PER QQ-B-654 GRADE III, WHICH ARE NOT TO
BE INSERTED IN GROOVE BUT PACKAGED SEPARATELY
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
SPECIFICATION REQUIREMENTS.
FULL AND OPEN COMPETITION APPLY
DETAILED DRAWING (ONE ITEM)
TDP Rev A Gen 1 IAW BASIC DRAWING NR 16236 CS4730-0024
SPE7M3-26-T-7516
SECTION B
REVISION NR E DTD 09/21/1982
PART PIECE NUMBER: CS4730-0024-2IN
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7010231379 0001 EA 165.000
NSN/MATERIAL:4730002523508
DELIVERY (IN DAYS):0123
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C
UNIT CONT:D3 OPI:O
INTRMDTE CONT:DO INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
IP056: MERCURY OR MERCURY COMPOUNDS ARE PROHIBITED IN PRESERVATION,
PACKAGING, PACKING AND MARKING.
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
SPE7M3-26-T-7516
SECTION B
PR: 7010231379 PRLI: 0001 CONT’D
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:06/03/2025 Original Required Delivery Date:11/07/2025
SPE7M3-26-T-7516 NSN/Part Number: 4730-00-252-3508 Quantity: 165 EA Purchase Request: 7010231379QTY: 165 Delivery: 123 days ADO
Similar Contracts
Same NAICS industry code
More opportunities from Department Of Defense → FLUID HANDLING DIVISION
Same awarding agency