This Solicitation opportunity from Department Of Defense was posted on September 14, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

FLANGE, PIPE

Closed

SPE7M3-26-T-8807Federal

Submission Closed09/17/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 332999

New

DIBBS

Supplier of Spring-Loaded Shaft Seal AssembliesThis subcontract, issued by the DLA Weapons Support Maritime Supply Chain under the Department of Defense, requires the provision of three spring-loaded shaft seal assemblies. The supplier is responsible for manufacturing or sourcing parts that meet NSN 4320016927342 and must strictly adhere to ASTM D3951 and MIL-STD-129 standards for packaging and labeling. Performance of the contract takes place in Tracy, California, under NAICS code 332999. The agreement is designated as a Total Small Business Set-Aside and mandates compliance with the DLA Master List of Technical and Quality Requirements. Additionally, the supplier must follow DFARS 252.204-7012 regulations regarding cybersecurity reporting. The solicitation was posted on October 29, 2026, with a response deadline of November 9, 2026.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Pressure Bellows (NSN 3010-01-200-5475) SupplierThis subcontract involves the manufacture or procurement of 21 pressure bellows under NSN 3010-01-200-5475 for prime contractors supporting the Department of Defense DLA Weapons Support Land Supplier Operations. The supplier must ensure all parts meet DLA Master List requirements and adhere to strict packaging and palletization standards, specifically ASTM D3951, MIL-STD-129, and RP001. Performance of the contract is centered at Tinker AFB. Compliance requirements are rigorous, necessitating a CMMC Level 2 self-assessment and full adherence to NIST SP 800-171. Additionally, the supplier must comply with the Buy American Act and the Berry Amendment. Interested parties must submit their responses by November 9, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Supply of Shaft Seal AssembliesThis subcontract involves the manufacture or sourcing of five shaft seal assemblies, specifically NSN 4320015250276, to support prime contractors fulfilling DLA supply contracts. The project is managed under the Department of Defense through the DLA Weapons Support Maritime Supply Chain, with performance taking place in Tracy, California. A critical technical requirement of the contract is strict adherence to NAVSEA standards, ensuring that no mercury or mercury-containing compounds are intentionally added or in direct contact with the assemblies. The solicitation was posted on October 29, 2026, with a response deadline of November 9, 2026, falling under NAICS code 332999.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Supply of Straight Adapters (NSN 4730-01-715-8211)This subcontract with the Department of Defense, specifically the DLA Weapons Support Fluid Handling Division, requires the procurement of 18 straight adapters identified by NSN 4730-01-715-8211. The contractor is responsible for manufacturing or sourcing these units in strict accordance with the DLA Master List technical and quality requirements. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 332999. Critical compliance mandates include packaging and labeling according to MIL-STD-129 and RP001 standards. Additionally, the contractor must certify that no Class I ozone-depleting chemicals are utilized during the production process. The solicitation was posted on October 29, 2026, with a response deadline of November 9, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Supply of Forward Roller Assemblies (NSN 1055016527993)This subcontract, issued by the Department of Defense under the DLA Weapons Support ASC Supplier OEM Division, requires the manufacture or sourcing of 635 Forward Roller Assemblies. All units must strictly adhere to the technical and quality specifications outlined in NSN 1055016527993 and the DLA Master List. The selected provider is responsible for submitting comprehensive documentation regarding the brand, model, and original equipment manufacturer part numbers. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 332999, with performance located in New Cumberland. To be eligible, contractors must complete a CMMC Level 2 Self-Assessment and maintain full compliance with defense telecommunications prohibitions. Interested parties must submit their responses by November 6, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Manufacturing of Solid Non-Metallic WheelsThis subcontract involves the manufacture and supply of solid, non-metallic wheels for prime contractors supporting DLA supply contracts. The contractor is responsible for fabricating wheels to NSN 5340-01-457-8615, utilizing either precision molding or additive manufacturing to ensure a 90A durometer. All products must strictly adhere to DLA Engineering Support Activity acceptability standards and Critical Application Item quality requirements. Managed by the Department of Defense under the DLA Weapons Support Land Supply Chain, the contract requires the delivery of finished wheels to the DLA Distribution DDSP New Cumberland Facility. The project falls under NAICS code 332999, with a response deadline set for November 9, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Supply of Pipe Flanges (NSN 4730005552566)

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Supply of Pintle Assembly, Towing (NSN 2540016148908)This subcontract involves the manufacture or procurement of 12 Pintle Assemblies for Towing to support prime contractors under DLA Weapons Support supply contracts. All hardware must strictly adhere to the technical data package specifications associated with NSN 2540016148908. To ensure compliance with contract requirements, the provider is required to submit a Certificate of Conformance for all delivered units. The contract is managed by the Department of Defense through the DLA Weapons Support LSO Combat Vehicles and Armament, falling under NAICS code 332999. Performance of the contract is centered in New Cumberland, Pennsylvania. Interested parties must respond by November 9, 2026, to fulfill the delivery of the specified towing assemblies and accompanying certifications.

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

Supply of Plain Encased Seals (NSN 5330008212374)This subcontract involves the supply of plain encased seals for prime contractors supporting DLA and Navy supply contracts. The scope of work requires the manufacture or sourcing of part number CB124-23, which is designated as a Critical Application Item. To maintain strict quality and tolerance standards, the provider must deliver a complete technical data package for both approved and proposed alternate parts. The specific deliverable consists of 7 units of NSN 5330008212374 along with the associated technical data package. This requirement is managed by the Department of Defense under the DLA Weapons Support Land Supplier Operations Vehicle Support agency, with the place of performance located in Dulles, Virginia.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Supply of Fluid Pressure Filter Parts KitsThis subcontract involves the supply of seven specialized fluid pressure filter parts kits for the Department of Defense under the DLA Weapons Support Maritime Supply Chain. The contractor is responsible for manufacturing or sourcing all necessary components and kitting them into single units. Strict adherence to the Buy American Act and the Berry Amendment is required to ensure domestic sourcing compliance. Operational requirements include following specific packaging and marking standards, namely MIL-STD-2073-1 Appendix D, MIL-STD-129, and RP001. Additionally, the provider must maintain NIST SP 800-171 compliance for data security. Performance for this contract will take place in New Cumberland, Pennsylvania.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Supply of Welding Qualification Test Kits (NSN 3439016824453)This subcontract, issued by the Department of Defense for the DDSP New Cumberland Facility, involves the supply of 352 welding qualification test kits under NSN 3439016824453. The contractor is responsible for manufacturing or sourcing these kits in strict accordance with Basic Drawing NR 98752 8027655 Rev B and Reference Drawing NR 98752 200415485 Rev E to support prime contractors delivering DLA supply contracts. The agreement is designated as a Total Small Business Set-Aside under NAICS code 332999. Key compliance requirements include adherence to NIST SP 800-171 cybersecurity standards and DFARS 252.223-7008 regulations concerning Hexavalent Chromium. Performance for this contract will take place in New Cumberland, Pennsylvania.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Safety Step Ladder SupplierThis subcontract opportunity with the Department of Defense, specifically DLA DIST SAN JOAQUIN, seeks a supplier to provide safety step ladders for prime contractors. The selected provider is responsible for manufacturing or procuring ladders that match NSN 5440-01-696-9999, ensuring full compliance with the DLA Master List of Technical and Quality Requirements (RA001). All items must be packaged according to ASTM D3951 standards and delivered to a designated Government-Arranged Transportation point. The contract falls under NAICS code 332999, with the place of performance located in Tracy, California. Interested parties must submit their responses by November 9, 2026, following the posting date of October 29, 2026.

DLA DIST SAN JOAQUIN

POSTED

about 8 hours ago

DEADLINE

in 11 days

AI Contract Overview

This contract is for the procurement of 217 pipe flanges, identified by NSN 4730-00-640-6833, under solicitation SPE7M3-26-T-8807. The items are specified as type PR, standard size 027, class 150, with a 1.000 inch IPS and 1.315 inch tube outer diameter, adhering to MIL-PRF-20042. A critical requirement is that the brazing ring must not be inserted into the groove but must be packaged separately or physically attached to the parent component. The agreement mandates strict adherence to DLA packaging requirements and MIL-STD-129 marking standards, with delivery set for the New Cumberland facility in Pennsylvania. Quality assurance is governed by MIL-STD-1916 or ASQ H1331 sampling plans, and the contract explicitly prohibits the intentional use of mercury or class I ozone-depleting chemicals. Delivery is required within 154 days, with a need ship date of February 16, 2027.

General Info

Procurement of 217 pipe flanges for New Cumberland facility by February 16, 2027.

Agency

Department Of Defense → FLUID HANDLING DIVISION

NAICS

332999 - All Other Miscellaneous Fabricated Metal Product Manufacturing

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

SPE7M3-26-T-8807 RFQ

19 pages · rfq

High

AI Contract Breakdown

Uniform Contract Format

Timeline

1 update

PhaseClosed

PostedSep 2

Solicitation

Deadline changedSep 14

Response deadline changed from Sep 14, 2026 to Sep 17, 2026.

Response DeadlineSep 17

Deadline has passed

Submission Closed

09/17/2026, 05:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → FLUID HANDLING DIVISION

Contacts1 person available

OfficeUSA

Organization / AgencyDepartment Of Defense → FLUID HANDLING DIVISION

Office AddressUSA

Contacts

William Cain

contact@example.gov

+1 (555) 000-0000

Full Description

FLANGE,PIPE
FLANGE, PIPE
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
TYPE PR, STANDARD SIZE 027, CLASS 150, 1.000 INCH IPS, 1.315 IN. TUBE OD
W/BOLT HOLES. BORE DIAMETER IS 1.180 INCH NOMINAL PER MIL-PRF-20042.
BRAZING RING IS NOT TO BE INSERTED IN GROOVE BUT PACKAGED SEPARATELY AND
EITHER INCLUDED WITHIN THE PARENT COMPONENT PACKAGE OR PHYSICALLY
ATTACHED TO PARENT COMPONENT.
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
CERTIFICATE OF CONFORMANCE PROCEDURES (FAR 52.246-15) ARE AUTHORIZED,
UNLESS WITHELD BY A QUALITY ASSURANCE LETTER OF INSTRUCTION.
SPE7M3-26-T-8807
SECTION B
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
SPECIFICATION REQUIREMENTS.
FULL AND OPEN COMPETITION APPLIES.
CRITICAL APPLICATION ITEM
TDP Rev A Gen 1 IAW BASIC DRAWING NR 16236 CS4730-0108 REVISION NR A DTD 07/18/1972 PART PIECE NUMBER: CS4730-0108A027DJ
TDP Rev A Gen 1 IAW REFERENCE SPEC NR MIL-PRF-20042G NOT 1 REVISION NR G DTD 10/24/2025 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017983162 0001 EA 217.000
NSN/MATERIAL:4730006406833
DELIVERY (IN DAYS):0154
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:E9 OPI:O
INTRMDTE CONT:D3 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
BRAZING RING IS NOT TO BE INSERTED IN GROOVE BUT PACKAGED SEPARATELY AND EITHER INCLUDED WITHIN THE PARENT COMPONENT
SPE7M3-26-T-8807
SECTION B
PR: 7017983162 PRLI: 0001 CONT’D
PACKAGE OR PHYSICALLY ATTACHED TO PARENT
COMPONENT.
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:02/16/2027 Original Required Delivery Date:01/14/2027
SPE7M3-26-T-8807 NSN/Part Number: 4730-00-640-6833 Quantity: 217 EA Purchase Request: 7017983162QTY: 217 Delivery: 154 days ADO