Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Flat Washer Supply (NAS1515 Rev 6 Compliant)

Active

Federal

Response Deadline08/07/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the manufacture and delivery of 200 flat washers that must fully comply with NAS1515 Revision 6, ensuring strict adherence to material specifications, dimensional tolerances, and quality control requirements as defined by the standard. All components must meet the technical and inspection criteria outlined in the specification to guarantee performance and compatibility in defense applications. The delivery destination is Tobyhanna, Pennsylvania, with the full order required to be fulfilled by the response deadline of August 7, 2026, following the solicitation posted on July 30, 2026. This is a subcontract under the Department of Defense’s ASC Commodities Division, classified under NAICS code 332311 for screw, nut, and bolt manufacturing, and is intended to support critical military logistics and equipment maintenance operations.

General Info

200 NAS1515 Rev 6 washers delivered to Tobyhanna, PA by August 7, 2026 for DoD use.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

332311 - Prefabricated Metal Building and Component ManufacturingView NAICS

Place of Performance

TOBYHANNA, PA, 18466-5050, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 30

subcontract

Response DeadlineAug 7

Submission deadline

Response Deadline

08/07/2026, 05:00:00 PM UTCin 6 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → ASC COMMODITIES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → ASC COMMODITIES DIVISION

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufacture and delivery of 200 flat washers compliant with NAS1515 Revision 6, including strict adherence to material, dimensional, and quality standards.

Similar Contracts

Same NAICS industry code

Safety Sign Posts (TeleSpar or Equivalent) and Hardware SupplyThe contract calls for the supply of breakaway safety sign posts, specifically TeleSpar or approved equivalent models, along with all necessary mounting hardware and foundation components required for proper installation. These components must meet industry standards for safety and durability, ensuring they can absorb impact and safely detach upon vehicle collision to minimize injury risk. The scope includes delivering the complete system as a ready-to-install unit, with all parts compatible and certified for use in transportation environments. This is a subcontract under the FAS - Purchasing agency, based in Washington, with a response deadline of September 14, 2026. The work falls under NAICS code 332311, which classifies it under Metal Work Manufacturing. There is no specified set-aside designation, and performance location details are not provided, indicating the deliverables may be shipped to various sites as needed. Bidders must ensure compliance with technical specifications for breakaway performance and material quality, and all submissions must be made through the provided procurement portal before the stated deadline.

FAS - Purchasing

POSTED

DEADLINE

in about 1 month

Mobile Debriefing Facility Integration and Final AssemblyThe contract calls for the full integration, assembly, and delivery of a turnkey mobile debriefing facility that meets ICD 705 SCIF standards, ensuring full compliance with federal security requirements for classified environments. This includes all structural assembly, secure interior fit-out, and system integration necessary to create a fully operational, transportable facility capable of hosting sensitive discussions and handling classified information without compromise. The work must be executed as a complete solution with no gaps in security, functionality, or build quality. The award is structured as a subcontract under a Small Business Set Aside - Total designation, with the NAICS code 332311 indicating it falls under the fabricated metal product manufacturing category, specifically for custom fabrication services required for this specialized facility. The opportunity was posted on July 31, 2026, with a response deadline of August 31, 2026, and the place of performance is identified as the zip code 15108. The contracting activity is under the U.S. Department of Defense through W7NX Uspfo Activity Paang 171, indicating this is a defense-related procurement aimed at supporting secure operational mobility for intelligence and law enforcement functions.

W7NX Uspfo Activity Paang 171

POSTED

DEADLINE

Snow Plow Capability IntegrationThe contract seeks the supply and integration of a snow plow attachment or front-mounting system designed to repurpose an existing sprayer vehicle for seasonal snow removal operations. This includes all necessary structural framing and hydraulic components required to convert the sprayer into a functional snow removal platform, ensuring seamless operation and compatibility with the current equipment. The solution must be robust, reliable, and engineered to withstand harsh winter conditions while maintaining the integrity of the original vehicle systems. This is a small business set-aside subcontract under the SBA program, specifically designated for total small business participation, with a NAICS code of 332311 indicating manufacturing of other commercial and service industry machinery. The solicitation was posted on July 31, 2026, and responses are due by August 7, 2026. The contracting office is the 246-NETWORK Contracting Office 6 under the Department of Veterans Affairs, and performance will occur at an unspecified location. All offerors must be certified small businesses eligible under the set-aside criteria, and the contract is expected to support critical infrastructure maintenance during winter months.

246-NETWORK Contracting Office 6 (36C246)

POSTED

DEADLINE

Mobile Debriefing Facility

Solicitation # W50S91-26-Q-A011

The 171st Air Refueling Wing is soliciting a single Mobile Debriefing Facility designed to meet stringent military operational standards, requiring a durable, secure, self-contained unit with a minimum of 110 square feet of usable interior space. The facility must be transportable via a standard 463L pallet, weigh no more than 4,000 pounds when dry and empty, and include integrated HVAC and LED lighting systems to ensure operational readiness in diverse environments. Full technical specifications, including physical dimensions, form, fit, function, and security requirements compliant with ICD 705, are outlined in the attached Salient Characteristics document. The acquisition is being conducted under FAR Part 12 procedures as a commercial product procurement, with a target award date of September 30, 2026, and is designated as a Small Business Set Aside for total set-aside under NAICS code 332311. Offers must be submitted by August 31, 2026, by responsible sources, and all proposals will be evaluated by the agency. The solicitation is issued under W50S91-26-Q-A011, posted on July 31, 2026, with primary point of contact Steve Sisneros and secondary contact Kaitlynn Fuga at the Department of Defense office in Coraopolis, Pennsylvania. Although funds are not yet available, the contract will not be awarded until appropriated funding is secured. All submissions should be directed through the official SAM.gov platform with the provided UI link, and prospective vendors are expected to comply with all security and logistical constraints to ensure seamless integration into critical mission planning operations.

W7NX Uspfo Activity Paang 171

POSTED

DEADLINE

Commercial Door Supply – Trough DoorsThe contract involves the supply of 11 trough doors that must meet military specifications under CLIN 6PZL1, as part of a subcontract under the Commercial Door Supply – Trough Doors initiative. The work is obligated under a Department of Defense procurement managed by the ASC SUPPLIER OPER OEM DIVISION, with performance required at a designated location in Tracy, California, zip code 95304-5000. The solicitation was posted on July 30, 2026, and responses are due by August 7, 2026, indicating a tight, seven-day window for submission. The North American Industry Classification System code 332311 identifies the primary industrial category as metal door and frame manufacturing, underscoring the specialized nature of the components required. All doors must adhere strictly to military standards, ensuring durability, functionality, and compatibility within defense systems. The acquisition is not subject to specific set-aside designations, making it open to qualified suppliers regardless of business size or ownership structure.

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Supply of Emergency Egress Door Components (EEBD Stow Door)The contract calls for the procurement and delivery of 436 standardized metal door components identified by NSN 2090012844327, intended for use in emergency egress breathing device stowage units. Each unit must be fully packaged and properly labeled in accordance with federal specifications, ensuring readiness for integration into military systems upon arrival. Delivery is required at a Defense Logistics Agency warehouse located in Tracy, California, with the full scope including compliance with all quality, documentation, and handling standards mandated for defense procurement. This is a total small business set-aside under the SBA program, exclusively available to qualifying small businesses as defined by FAR 19.5, with the NAICS code 332311 indicating the manufacturing of forged and stamped metal products. The solicitation was posted on July 30, 2026, with responses due by August 10, 2026, and is structured as a subcontract under the Fluid Handling Division of the Department of Defense. The procurement is critical to sustaining operational readiness and must adhere strictly to technical and logistical requirements outlined in the contract documentation available via the DIBBS system.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Manufacturing of Metal Marine DoorsThe contract requires the fabrication of two metal marine structure doors in strict compliance with military specifications, emphasizing corrosion resistance and structural integrity for long-term performance in harsh marine environments. The work must meet rigorous standards to ensure durability against saltwater exposure, extreme weather, and operational stress, with all materials and processes selected to uphold the required resilience and safety for defense applications. The doors are intended for use at a designated performance location in New Cumberland, Pennsylvania, with zip code 17070-5002. This is a subcontract under the NAICS code 332311, issued by the Fluid Handling Division of the Department of Defense, with a response deadline of August 10, 2026, and a posting date of July 30, 2026. The solicitation is accessible via the DIBBS platform, and while no set-aside designation or point of contact is listed, bidders must ensure full alignment with military requirements, delivery timelines, and quality assurance protocols. Failure to meet specifications could result in rejection, making technical compliance and proven experience in defense-grade metal fabrication essential for proposal consideration.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Hex Nut Supply (Plain, Hexagon) – NSN 5310016554601The contract requires the supply and delivery of a single plain hexagon nut identified by NSN 5310016554601, adhering strictly to military and federal packaging standards to ensure compatibility and readiness for defense applications. Delivery must be completed FOB destination within five days of order placement, emphasizing timeliness and logistical precision to support operational needs. The item is intended for use under the Department of Defense, specifically managed by the ASC Commodities Division, with performance taking place at APO, ZIP code 96367, indicating a remote or overseas military location. The solicitation, classified as a subcontract under NAICS code 332311 for screw, bolt, and nut manufacturing, has a response deadline of August 4, 2026, and was posted on July 30, 2026, allowing vendors a brief window to submit proposals. There is no specified set-aside type or point of contact, suggesting the procurement follows standardized procedures without preferential treatment.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Structural Channel Manufacturing and SupplyThe contract seeks the manufacture and delivery of seven units of structural channel components identified by NSN 2590-01-670-2825, requiring full compliance with applicable military specifications and packaging standards. The work must be performed in accordance with defense contracting requirements, with the place of performance located in New Cumberland, Pennsylvania, under the oversight of the Department of Defense’s Land Supplier Ops Vehicle Support organization. The solicitation, classified as a subcontract, was posted on July 30, 2026, with responses due by August 10, 2026, and falls under NAICS code 332311, indicating the work involves forging and stamping operations relevant to structural metal component production. All deliverables must meet exacting quality and documentation criteria expected for military-grade hardware.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Metal Fabrication and Welding RepairsThe contract seeks qualified subcontractors to perform welding and fabrication services aimed at repairing corroded structural components of military vehicles and equipment, with a focus on restoring frames and panels to operational condition. Work must meet strict military standards for durability and safety, ensuring the integrity of critical hardware used in defense operations. The scope emphasizes precision in material selection, corrosion-resistant techniques, and adherence to military specification requirements for restored components. This subcontract is open for response until August 7, 2026, with work to be performed at Yigo, 96929. The North American Industry Classification System code 332311 identifies the primary industry as metal fabricators specializing in structural work. The contract is administered by the Department of Defense under the office identifier FA5025 356 Eceg Pk, and all submissions must comply with federal subcontracting protocols. The location indicates the work will occur in a Pacific region military support area, requiring vendors to account for logistics, local regulations, and potential environmental constraints in their proposals.

FA5025 356 Eceg Pk

POSTED

DEADLINE

KHC Security Shack Replacement with Bollard Installation

Solicitation # IHS1523318

This solicitation, IHS1523318, is a total small business set-aside reserved exclusively for Indian Economic Enterprises (IEE) under the Buy Indian Act, issued by the Navajo Area Indian Health Service within the Department of Health and Human Services. The scope of work requires the replacement of an existing 6x10-foot security booth at the Kayenta Health Care Center in Arizona with a new Level 3 ballistic-proof structure and the installation of eight crash-resistant steel bollards rated to stop a 5,000-pound vehicle traveling at 30 miles per hour under ASTM F2656 M30 standards. All work must be performed during normal business hours to avoid disrupting patient care, with strict adherence to healthcare facility safety protocols, including contamination control, COVID-19 compliance, and daily ID badge requirements. The contractor must remove and dispose of the old booth, connect utilities, pour concrete foundations for the bollards, and ensure the final worksite is clean and debris-free, with a one-year warranty covering all workmanship and equipment. Submission is limited to offerors registered in SAM.gov with a valid Unique Entity ID who can demonstrate IEE or ISBEE status by completing the required IHS IEE Representation Form. Proposals must include a company profile with socioeconomic certification, a capability statement detailing past performance, and the completed representation form—all submitted via email to Daisha Richards by the March 16, 2026 deadline. No formal pricing structure, line-item details, or contract value is provided as this is a market research notice, and award will follow a subsequent formal solicitation based on responses. Installation is to occur at the Kayenta Health Care Center site, with all inspections and acceptance conducted on-site by the government representative. The contracting office is based in Window Rock, Arizona, and no COR, COTR, or PCO contact details are listed; all communications must go through the provided point of contact. Packaging, shipping, and invoicing details are not specified, and no formal FAR Part 52 clauses are cited, though compliance with NEC, NFPA, and Buy Indian Act requirements is mandatory.

Navajo Area Indian Health Svc

POSTED

DEADLINE

Construction Alternative Material Supply (CMP Pipe)The contract seeks the supply of 1,100 linear feet of 36-inch Corrugated Metal Pipe (CMP) to be used in a stormwater management solution for the Public Works Department of the City of South Lake Tahoe. The material must meet specified engineering and durability standards suitable for drainage applications in the region’s environmental conditions. This is classified as a subcontract opportunity with a NAICS code of 332311, indicating it falls under the manufacturing of metal pipes and tubes. The solicitation was posted on July 30, 2026, and responses are due by August 28, 2026, at 7:00 PM, with no set-aside provisions specified, meaning all qualified vendors may bid regardless of business size or ownership characteristics. The place of performance is not detailed beyond the agency’s location in California, and no point of contact or physical address is provided in the data, though bids must be submitted through the online portal listed.

Public Works Department of City of South Lake Tahoe

POSTED

DEADLINE

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

Surveying and Site Layout ServicesThis contract is for surveying and site layout services under a Total Small Business Set-Aside, reserved exclusively for small businesses as defined by the SBA, with the NAICS code 541370 corresponding to surveying and mapping services. The work involves comprehensive topographic surveying, verification of property boundaries, and exact layout of structures and infrastructure elements to support precise construction and development activities. The solicitation was posted on August 1, 2026, and responses are due by August 24, 2026, with the ordering activity being the ASC Commodities Division under the Department of Defense. The services will be performed at an unspecified location, and while no point of contact or detailed address is provided, the opportunity is publicly accessible through the DIBBS platform. The contract is structured as a subcontract, indicating it may be part of a larger project requiring specialized geospatial and site verification expertise.

Surveying and Mapping (except Geophysical) Services

POSTED

about 5 hours ago

DEADLINE

Paving and Asphalt ServicesThe contract is for paving and asphalt services covering grading, base preparation, and asphalt installation for roads, parking lots, and accessways under a total small business set-aside, as defined by the SBA and FAR 19.5, with a NAICS code of 237310. It is issued as a subcontract by the ASC Commodities Division within the Department of Defense, with responses required by August 24, 2026, following a posting date of August 1, 2026. Work must be performed at locations determined by the agency, though specific cities or states are not listed, and the solicitation is accessible through the DIBBS system for qualified small business contractors seeking to bid.

Highway, Street, and Bridge Construction

POSTED

about 5 hours ago

DEADLINE

Concrete Formwork and PlacementThe contract titled Concrete Formwork and Placement is a small business set-aside under the SBA Total Small Business Set-Aside provision, exclusively available to qualified small businesses. It involves the full scope of concrete construction activities including forming, reinforcing, and pouring for foundations, slabs, walls, and other structural elements, aligned with NAICS code 238110 for concrete work. The solicitation was posted on August 1, 2026, with responses due by August 24, 2026, and is issued as a subcontract under the Department of Defense through the ASC Commodities Division. The place of performance and organizational details are not specified, but the work is expected to support military or defense-related infrastructure needs. All proposals must be submitted through the DIBBS portal prior to the deadline, and contractors must meet small business certification requirements to be eligible for award.

Poured Concrete Foundation and Structure Contractors

POSTED

about 5 hours ago

DEADLINE

Plumbing and Piping Systems InstallationThe contract titled Plumbing and Piping Systems Installation is a subcontract under a Total Small Business Set-Aside, designated for small businesses as defined by the SBA, with a NAICS code of 238220 covering plumbing, heating, and air-conditioning contractors. It pertains to the installation of potable water, waste drainage, and gas piping systems within commercial or institutional buildings, requiring specialized expertise in mechanical systems compliance and building code adherence. The solicitation was posted on August 1, 2026, with a response deadline of August 24, 2026, and is managed by the ASC Commodities Division under the Department of Defense, though specific performance location and point of contact details are not provided. Contractors must submit proposals before the deadline to be considered for award under this set-aside, ensuring eligibility and compliance with small business certification requirements.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

about 5 hours ago

DEADLINE

Electrical Installation and Wiring ServicesThe contract titled Electrical Installation and Wiring Services is a subcontract under a Total Small Business Set-Aside, as defined by the SBA, meaning only small businesses are eligible to bid. It falls under NAICS code 238210, which covers electrical contracting services, and involves the installation of comprehensive electrical systems for commercial or infrastructure projects, including wiring, conduits, lighting, and power distribution components. The solicitation was posted on August 1, 2026, with a deadline for responses set for August 24, 2026, and is managed by the ASC Commodities Division within the Department of Defense. While specific location details and point of contact information are not provided, the contract is accessible via a DIBBS portal link, indicating it will be procured through Department of Defense procurement systems.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

about 5 hours ago

DEADLINE

DETECTOR, RADIO FREQUENCY

Solicitation # SPE4A6-26-R-XC21

The contract pertains to the procurement of a Radio Frequency Detector under solicitation SPE4A6-26-R-XC21, a total small business set-aside with a ceiling value of $250,000, awarded through an indefinite-delivery, indefinite-quantity (IDIQ) structure with a five-year term. The item, identified by NSN 5895-01-211-0211, requires full compliance with military packaging standards MIL-STD-2073-1E and marking requirements under MIL-STD-129, including bold external labeling of “First Article Exhibits - Do Not Post to Stock” for FAT samples. The contractor must establish and maintain an inspection system compliant with FAR 52.246-2 or 52.246-3, retain all records supporting conformance, and provide written notice at least 14 days before shipment if DCMA assumes quality admin responsibilities. First Article Test reports must follow the DI-NDTI-80809B format, include confirmation that production units will be manufactured using the same processes and facilities, and be submitted to designated DLA monitoring addresses based on the issuing activity—Aviation, Land, Maritime, or Troop Support—with preferred electronic routing. For Government-performed FAT, units must be shipped via traceable carriers with hard-copy attachments including contract documents, certifications, drawings, and a pre-paid return label, while external packaging must display mandatory markings and internal packages must include a receipt documentation copy. The contract mandates electronic invoicing exclusively through WAWF and adherence to stringent supply chain controls, including prohibitions on covered telecommunications equipment per DFARS 252.204-7016 and FAR 52.204-24, alongside federal sustainability, hazardous materials, and sick leave requirements. Delivery schedules stipulate 120 days for FAT unit shipment, another 120 days for Government evaluation, and 378 days for final production delivery after FAT approval, with FOB destination terms applying to FAT samples. Offerors must represent their small business status, UEI, and CAGE code in SAM, and disclose any use of restricted equipment, involvement with sanctioned countries, or inverted corporate status. All proposals must be submitted electronically via DIBBS or email to the designated point of contact, with no paper submissions permitted. The award will be based on a best-value trade-off, weighing past

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 5 hours ago

DEADLINE

Quality Assurance and Inspection Services (MIL-STD-1916 Compliance)The contract mandates independent quality verification services adhering to MIL-STD-1916 sampling procedures to assess compliance of delivered units against defined acceptable quality levels for critical, major, and minor defects. This ensures that all products meet rigorous military standards for reliability and performance, with inspection outcomes directly tied to acceptance or rejection criteria based on statistically valid sampling methods. The work is performed under a subcontract structure and is specifically scoped to maintain stringent quality control protocols throughout the delivery process. Quality assurance activities are to be conducted at the place of performance located in Cherry Point, North Carolina, with the contract being administered by the ASC Commodities Division under the Department of Defense. The solicitation was posted on July 31, 2026, and responses are due by August 5, 2026, indicating a short turnaround window for qualified vendors to submit proposals. The North American Industry Classification System code 541330 identifies this as a professional, scientific, and technical services requirement centered on quality control and testing, targeting specialized subcontractors with demonstrated expertise in defense-related inspection and compliance.

Engineering Services

POSTED

DEADLINE

Packaging, Labeling, and Palletization Services for Military ShipmentThe contract requires specialized preservation, packaging, labeling, and palletization services for indicating panels in full compliance with MIL-STD-2073-1E, MIL-STD-129, and DLA RP001 standards, ensuring military-grade readiness for transport and storage. All work must be performed to meet strict federal specifications for durability, identification, and handling procedures, with final delivery designated as FOB Origin, meaning the contractor assumes responsibility until the goods are loaded at the designated point of shipment. The services are critical to supporting military logistics and must be executed with precision to maintain supply chain integrity. This subcontract, issued under NAICS code 493190 by the ASC Commodities Division of the Department of Defense, is solicited with a response deadline of August 5, 2026, and the performance location is tied to Cherry Point, North Carolina, with ZIP code 28533-5040. Although no set-aside designation is specified, participation is open to qualified vendors capable of delivering compliant solutions under tight federal guidelines. The solicitation is managed through the DIBBS platform, and timely submission is essential to be considered for award.

Other Warehousing and Storage

POSTED

DEADLINE

Manufacture and Supply of Indicating Light Panel (NSN: 6220013547598)The contract requires the full manufacturing, testing, packaging, and delivery of four military-spec indicating light panels identified by NSN 6220013547598, with strict compliance to MIL-STD-129, MIL-STD-2073-1E, and DLA RP001 standards for documentation, packaging, and labeling. All work must be performed to meet rigorous defense specifications ensuring operational readiness and interoperability within military systems. The panels are to be delivered to a designated performance location in Cherry Point, North Carolina, with zip code 28533-5040, and the contract falls under NAICS code 335313 for electrical lighting equipment manufacturing. This is a subcontract opportunity issued by the ASC Commodities Division under the Department of Defense, with a response deadline of August 5, 2026, and a posted date of July 31, 2026. The solicitation is accessible via the DIBBS portal and requires precise adherence to defense logistics protocols for packaging and traceability. No set-aside type is specified, indicating it is open to eligible subcontractors without restriction based on business size or veteran status. Successful bidders must demonstrate capacity to produce, test, and package units in full compliance with military standards and deliver them on schedule to meet critical deployment timelines.

Switchgear and Switchboard Apparatus Manufacturing

POSTED

DEADLINE

Supply Chain Traceability and Documentation ServicesThe contract requires comprehensive supply chain traceability and documentation services to ensure full visibility and accountability of components and processes throughout the lifecycle, with all records maintained in strict compliance with Defense Logistics Agency and Federal Acquisition Regulation standards. Work must support audit readiness at all times, enabling seamless verification by government oversight bodies through accurate, timely, and complete documentation that traces materials from origin to final assembly or delivery. The opportunity is classified as a subcontract under NAICS code 541611, issued by the ASC Commodities Division of the Department of Defense, with a posting date of July 31, 2026, and a response deadline of August 18, 2026. The place of performance and exact location details are not specified, but performance is expected to align with DLA’s operational requirements across the defense supply chain. All proposals must demonstrate proven capability in maintaining traceable, auditable records and systems that meet the stringent compliance and transparency mandates of federal defense contracting.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Packaging and Preservation Services for Defense LogisticsThe contract calls for comprehensive packaging, preservation, and marking services for wiring harnesses in strict compliance with Defense Logistics Agency guidelines and MIL-STD-129 requirements to guarantee the integrity and readiness of shipments for military use. All work must adhere to standardized procedures ensuring durable protection against environmental and physical damage during transit and storage, with precise labeling and documentation to support traceability and logistics operations across the defense supply chain. This subcontract opportunity, issued by the ASC Commodities Division under the Department of Defense, is classified under NAICS code 493190 and is open for responses until August 18, 2026. The performance location and specific delivery details are not specified, but successful bidders must be prepared to meet rigorous military standards for packaging and preservation without exception. The project emphasizes reliability and compliance over cost, targeting experienced service providers capable of handling sensitive defense components with proven expertise in federal supply chain protocols.

Other Warehousing and Storage

POSTED

DEADLINE

Hazardous Materials Compliance and Safety Data Sheet (SDS) ManagementThe contract pertains to the comprehensive management of hazardous materials used in manufacturing operations, requiring precise identification, labeling, and documentation to ensure regulatory compliance. A core responsibility includes the preparation and maintenance of Safety Data Sheets (SDS) in accordance with established safety standards, ensuring that all hazardous substances are accurately described, properly categorized, and accessible to relevant personnel. This work demands strict adherence to occupational safety and environmental regulations, with an emphasis on accuracy, consistency, and timeliness in recordkeeping to mitigate risk and support workplace safety. The solicitation is structured as a subcontract under NAICS code 541620, which classifies it within environmental consulting and related services. It is managed by the ASC Commodities Division, a component of the Department of Defense, indicating the scope is tied to defense-related manufacturing activities. The response deadline is August 18, 2026, with the opportunity posted on July 31, 2026, allowing potential offerors sufficient time to prepare submissions. Performance location details are not specified, suggesting the work may be conducted at multiple sites or facilities under the oversight of the contracting office. All activities must align with federal mandates governing hazardous materials handling, and compliance is non-negotiable for contract success.

Environmental Consulting Services

POSTED

DEADLINE