This Combined Synopsis/Solicitation opportunity from Department Of Defense was posted on June 3, 2024. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Flight SPIN and Control Room Training

Closed

F1S0AD4108A001RFederal

Submission Closed06/06/2024, 12:00:00 AM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 611512

New

SLED

Embraer Phenom 100 Pilot Initial / Recurrent Training

Solicitation # 601440000054616

The Texas Department of Transportation (TxDOT) is soliciting bids for instructor-led, technical classroom training for Embraer Phenom 100 pilots. The scope of work requires the vendor to provide all necessary labor, materials, and equipment to deliver initial and recurrent pilot training for five units using G1000 or G3000 systems, with an additional option for non-aircraft specific RVSM/MNPS recurrent training for five units. The contract is for an initial one-year term, with TxDOT reserving the right to unilaterally extend the term for up to one additional year. Responses must be submitted via the designated procurement portal by November 6, 2026, at 3:00 p.m. Central Time. To be considered, respondents must pass a preliminary screening based on documentation completeness and a CPA Vendor Performance Tracking System rating of A, B, or C. Award decisions will be based on best value, primarily considering purchase price, compliance with specifications, and the risk of vendor non-performance. Selected vendors must maintain specific insurance coverages, adhere to a smoke-free and drug-free workplace policy, and comply with Texas-produced goods preferences. Payments will be made via direct deposit or warrant in accordance with Texas Government Code Chapter 2251.

Texas Department of Transportation

POSTED

DEADLINE

Type 3 Helicopter Provision and Flight ServicesThis subcontract involves the provision of a Type 3 Helicopter and a qualified pilot to support prime contractors conducting exclusive use flight operations for the USWFS at Fort Wainwright, Alaska. The service provider is responsible for ensuring the aircraft is properly configured for USWFS operations and maintains strict airworthiness and operational compliance in accordance with 14 CFR 133 and Advisory Circulars 43 13–1B and 43 13-2B. Key deliverables include the guarantee of daily aircraft availability and the completion of specified flight hours. The opportunity is designated as a total Small Business Set Aside and is managed under the Department of the Treasury's Ibc Acq Svcs Directorate. Interested parties must submit their responses by November 17, 2026. The contract falls under NAICS code 611512 and focuses on specialized aviation support for federal flight operations.

Ibc Acq Svcs Directorate (00004)

POSTED

DEADLINE

Specialized Aviation Maintenance ServicesThe Specialized Aviation Maintenance Services subcontract, issued by the Department of the Interior through the Ibc Acq Svcs Directorate, involves providing critical maintenance support for USWFS Leadplane projects. The scope of work includes performing both scheduled and unscheduled maintenance, routine inspections, preventative measures, and emergency repairs. All work must be executed using aviation-grade diagnostic equipment and tooling to ensure full compliance with FAA regulations and DOI policies. The selected provider is responsible for delivering essential airworthiness certifications and maintaining accurate aircraft logs. Interested parties should note that the solicitation was posted on October 15, 2026, with a response deadline of November 10, 2026. This effort falls under NAICS code 611512 and focuses on maintaining the operational readiness of aircraft utilized by prime contractors.

Ibc Acq Svcs Directorate (00004)

POSTED

DEADLINE

Expeditionary Mobile Training Team (MTT) SupportThe Expeditionary Mobile Training Team Support subcontract, issued by the Department of Defense under agency FA3002 338 Ess Cc, provides scalable OCONUS training support for prime contractors working on government C-208B and PC-12 aircraft projects. The scope of work involves deploying instructors to international locations to operate host-nation assets and deliver completed training syllabi. To ensure operational compliance, the contractor must coordinate with Government Flight Representatives and adhere to Military Flight Releases in accordance with DCMA Instruction 8210.1. The project requires the use of portable training aids and specialized deployment gear to facilitate mobile instruction. Interested parties should note that the response deadline for this opportunity is November 13, 2026. The contract is categorized under NAICS code 611512, focusing on flight instruction and specialized aviation training support.

POSTED

DEADLINE

Specialized Flight Instruction ServicesThe Department of Defense is seeking a subcontractor to provide Specialized Flight Instruction Services for prime contractors operating government C-208B and PC-12 aircraft. The scope of work includes delivering initial qualification, recurrent, and currency training, with a specific focus on tactical ISR, Night Vision Goggles operations, and tactical airland or short-field maneuvers. To ensure high standards of pilot certification, the contractor will utilize Part 142 flight simulators and must provide FAA Title 14 CFR CAO or PAO justification. This subcontract opportunity falls under NAICS code 611512 and is managed by the 338 Ess Cc. Interested parties should note that the solicitation was posted on October 14, 2026, with a response deadline of November 13, 2026. The primary objective is to ensure all pilots meet rigorous qualification and currency standards necessary for specialized government flight projects.

POSTED

DEADLINE

C-208 and PC-12 Special Missions Training

Solicitation # FA3002_FMS_C208_PC12_SMT

The Department of the Air Force, specifically the Air Education and Training Command Special Missions Division and Air Force Security Assistance Training, is conducting market research to identify qualified commercial sources for turnkey flight and maintenance training on C-208B Grand Caravan EX and Pilatus PC-12 aircraft. The primary requirement focuses on Contractor-Owned, Contractor-Operated assets and facilities within the Continental United States under FAA civil certification. There is also a contingent requirement for OCONUS support via Mobile Training Teams utilizing host-nation assets. Training objectives include initial and recurrent qualification for pilots, Mission Systems Operators, and Loadmasters, with a specific emphasis on special missions such as Intelligence, Surveillance, and Reconnaissance, Tactical Airland, Short-Field, and Night Vision Goggle flight operations. Maintenance training will cover airframes, PT6A powerplants, and tactical gear. Interested respondents must submit a capability statement and a completed capability matrix detailing their operational locations, fleet availability, and instructional capacity. The government is seeking input on the most cost-effective contract structures, such as firm-fixed-price per student or a monthly retainer with variable costs per flying hour. Compliance with AETC syllabi and AETCMAN 11-2AA standards is mandatory, and contractors must be capable of managing Defense Base Act insurance, international deployment clearances via APACS, and Status of Forces Agreements for OCONUS operations. This effort is currently a Sources Sought notice under NAICS 611512 and does not yet constitute a formal request for proposal or a contractual obligation.

POSTED

DEADLINE

Pilot Ground and Flight Training ServicesThis subcontract for Pilot Ground and Flight Training Services supports prime contractors on Henrico County Government Police projects. The scope of work involves providing specialized training for two pilots within the Metro Aviation Unit, consisting of a minimum of four hours of ground school and flight operations. The curriculum specifically covers G1000 avionics, turbocharged engine operation, and aircraft oxygen systems, culminating in a proficiency certification. To qualify, the service provider must be a Certified Flight Instructor or a manufacturer-authorized trainer. The performance of these services will take place within the County of Henrico, Virginia. Interested parties should note the response deadline of October 30, 2026.

Henrico County Government

POSTED

DEADLINE

Initial and Recurrent Ground School and Simulator Training on Airbus A-330

Solicitation # 6973GH-27-R-00013

The Federal Aviation Administration, through the Mike Monroney Aeronautical Center, is soliciting proposals for a Firm Fixed Price, Indefinite Delivery Requirements contract to provide initial and recurrent ground school, flight training device, and simulator training for Airbus A-330 inspectors and pilots. The scope includes pilot qualification training and ground school for Flight Test Engineers. The contract consists of a one-year base period running from December 1, 2026, to November 30, 2027, with four subsequent one-year option periods extending through November 30, 2031. Services will be ordered on an as-needed basis via task orders. Award will be made to the lowest price technically acceptable offeror. Technical requirements include providing evidence of an approved training program under 14 CFR Parts 121, 135, 141, or 142, proof of ownership or lease of necessary aircraft and simulation devices, and a detailed description of training facilities. Equipment must meet minimum standards of a Level 5 Flight Training Device and a Level C Flight Simulator. The vendor determines the training location and is responsible for providing coach-class transportation if training occurs away from the ground school. Proposals must be submitted electronically to the contracting officer, Joe Oglesby, by 2:00 P.M. CDT on October 23, 2026. Submissions must include unit pricing for the base and option years, a statement of agreement with all FAA terms, and required representations and certifications, including SAM registration and UEI identification. Invoicing requires a signed Certificate of Training Completion for each student and detailed documentation of services provided.

6973GH Franchise Acquisition Svcs

POSTED

DEADLINE

Rotary Wing Aerial Survey ServicesThis subcontract for Rotary Wing Aerial Survey Services involves performing aerial survey flights for moose census projects on behalf of the Government of Yukon Department of Environment. Operating from a base in Carmacks, the contractor is responsible for executing 10 to 12 parallel lines per 4km x 4km unit, maintaining an altitude of 100 to 150 meters AGL and a speed of 60 to 70 mph. The primary deliverables are the completed survey lines and total flight hours. To qualify, the provider must supply two helicopters capable of low-altitude precision flying and possess all necessary valid aviation licenses. Additionally, the contractor must be registered with the Yukon First Nations Business Registry. The solicitation was posted on October 6, 2026, with a response deadline of October 21, 2026.

POSTED

DEADLINE

CSO - U.S. Army Aviation Training

Solicitation # W9113M-25-S-C006

The U.S. Army Contracting Command Redstone Arsenal is soliciting innovative commercial products, technologies, and services through a Commercial Solutions Opening to modernize aviation training. The primary objectives are to rapidly train and qualify aviators across all platforms, transform training through commercial practices and technology, and expand the aviation industrial base. The solicitation focuses on three specific Areas of Interest: Fixed-Wing Aircraft Training, Rotary-Wing Aircraft Training, and Unmanned Aerial Systems Training. This effort is conducted under various authorities, including 10 U.S.C. 3458, 4022, and 4023, allowing for flexible award instruments such as FAR Part 12 commercial procedures, fixed-price or fixed-price incentive contracts, and non-FAR transaction agreements. The selection process consists of a multi-phase evaluation based on technical merit, schedule feasibility, and price affordability. Phase I requires a Solution Brief and Quad Chart, followed by a Phase II presentation for selected candidates, and a final Phase III Commercial Solutions Proposal consisting of separate technical, performance work statement, and price volumes. Offerors must be registered in the System for Award Management with a valid Unique Entity ID to be eligible. The CSO remains open indefinitely, with the current submission window extending to September 30, 2030. All awards will be fixed-price, and successful vendors must register in the Wide Area Work Flow system for invoicing within ten days of award.

POSTED

DEADLINE

Out of Agency TrainingThe Department of Transportation is forecasting a requirement for formal initial and recurrent pilot qualification training specifically for the Gulfstream G280 aircraft. This out of agency training initiative is categorized under NAICS code 611512, focusing on flight instruction and pilot certification to ensure operational safety and proficiency. The procurement process is managed by the Federal Aviation Administration, with Barry Carrington serving as the primary point of contact and Gerald A. Lewis acting as the Small Business Specialist. Interested parties can find further details regarding this forecast through the Acquisition Gateway portal.

POSTED

DEADLINE

Out of Agency TrainingThe Department of Transportation is forecasting a requirement for formal initial and recurrent pilot qualification training using simulators for the Pilatus PC-24 aircraft. This training initiative falls under NAICS code 611512, which pertains to flight instruction, and is intended to ensure pilots maintain the necessary certifications and operational proficiency for this specific aircraft model. The procurement is currently listed as a forecast with a posted date of September 29, 2026. Interested parties can coordinate with Barry Carrington or Small Business Specialist Gerald A. Lewis for further information regarding this out of agency training opportunity.

POSTED

21 days ago

DEADLINE

N/A

General Info

Agency

Department Of Defense → FA9302 Aftc Pzz

NAICS

611512 - Flight Training

Place of Performance

Edwards, CA, USA

Set-Aside

NONE

Documents

Statement of Requirements - T-7 Spin Trg-Control Room

sow

High

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseClosed

PostedJun 3

Combined Synopsis

Response DeadlineJun 6

Deadline has passed

Submission Closed

06/06/2024, 12:00:00 AM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → FA9302 Aftc Pzz

Contacts2 people available

OfficeEDWARDS AFB, CA, 93524-1185, USA

Organization / AgencyDepartment Of Defense → FA9302 Aftc Pzz

Office AddressEDWARDS AFB, CA, 93524-1185, USA

Contacts

Denina Hudson

contact@example.gov

Kimberly McGee

contact@example.gov

+1 (555) 000-0000

Full Description

This is a Combined Synopsis/Solicitation for Aircraft Spin and Control Room Training. PLEASE READ ALL INFORMATION PROVIDED 1. This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. The Simplified Acquisition Procedures (FAR 13) will be used for requirement. 2. This acquisition requires a local contractor who can provide the following for Edwards AFB, CA. Period of Performance/Delivery: approximately 180 days. Services Requested: The 416 FLTS is looking to purchase five (5) spin training courses/flights with five (5) telemetered control rooms training sessions--Includes on demand spin training for (5) T-7 pilots with a control room for a small group of flight test engineers. The aircraft used for training must be a small jet fighter type aircraft similar to the T-7A and T-38 and instrumented for departure testing for effective high alpha departure and recovery training. See Statement of Requirements for Specifics. Interested parties who believe they can meet all the requirements for the items described in this synopsis are invited to submit, in writing, a complete quote -- ensuring the quote contains information and pricing for all supplies and services included on the Statement of Requirements. Offerors are required to submit with their quote with enough information for the Government to evaluate the requirements detailed in this combined synopsis/solicitation. Offerors shall submit quotes via email, please note the maximum file size is 10MB. Emails over this file size will not be received. Submit only written offers; oral offers will not be accepted. This solicitation is issued as a Request for Quote (RFQ). 3. This solicitation document and incorporated provisions and clauses are in effect through Federal Acquisition Circular 2023-04 and DFARS Change 06/09/2023 and DAFAC 2023-0707. 4. THIS REQUIREMENT WILL BE: Full and Open Competition. The North American Industry Classification System (NAICS) number for this acquisition is 611512 - Flight Training with a size standard of 34 Million dollars. 5. Period of Performance/Delivery: approximately 180 Days 6. The provision at FAR 52.212-1, Instructions to Offerors'Commercial Products and Commercial Services (Mar 2023), applies to this acquisition. Provisions and clauses can be viewed via internet at Acquisition.gov, https://www.acquisition.gov/. Offerors shall prepare their quotations in accordance with FAR 52.212-1. PROVIDE THE FOLLOWING CONTRACTOR INFORMATION WITHIN AND/OR WITH YOUR QUOTE: 1. SAM UEI 2. CAGE Code: 3. Contractor Name: 4. Payment Terms (net 30) or Discount: 5. POC Name, Phone Number, Email: 6. Warranty: 7. Date Offer Expires: 8. FOB Destination: 9. Estimated Delivery Lead Time: 10. Competed copy of FAR 52.212-3 Alt 1, Offeror Representations and Certifications - Commercial Items (Oct 2014) or notification that FAR 52.212-3 representation and certifications are available on SAM.gov 7. The provision at FAR 52.212-2, Evaluation'Commercial Products and Commercial Services (Nov 2021) applies to this acquisition. The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The following factors shall be used to evaluate offers: ***Please read the evaluation criteria closely. If vendor does not provide a full response, it will be found unresponsive*** The solicitation provides that quotations will be evaluated using Best Value Past Performance Technical (PPT) Acceptability. The award will be made on the basis of the lowest evaluated price of proposals meeting or exceeding the acceptability standards for non-cost factors. The technical acceptability factor contains two non-cost subfactors: (1) Ability to provide the Aircraft Spin Training and Control Room Training as described in the Statement of Requirements and (2) Experience - offers must submit at least three instances of providing this training. The agency will first rank quotations according to price from lowest to highest and then will evaluate the lowest-priced quotation as either technically acceptable or unacceptable, reserving the right to evaluate additional quotations for technical acceptability if deemed to be in the best interest of the government. Evaluation Factors: 1. Price 2. Technically Acceptability Technically Acceptable Subfactors: 1. Aircraft Spin Training and Control Room Training as described in the Statement of Requirements 2. Experience - Must submit at least three instances of providing this training. The ability to provide the Aircraft Spin Training and Control Room Training will be assigned ratings of satisfactory or unsatisfactory. Experience, for those offers submitting at least three instances of providing the Aircraft Spin Training and Control Room Training, will be considered for quality. Quality will be assigned ratings of satisfactory or unsatisfactory, offerors rated unsatisfactory will be found not technically acceptable for experience. The Government will award a delivery order resulting from the RFQ to the responsible offeror whose quote is responsive to the RFQ and considered to be the Best Value based on LTPA. 8. The clause at FAR 52.212-4, Contract Terms and Conditions'Commercial Products and Commercial Services (Dec 2022), applies to this acquisition. 9. The clause at FAR 52.212-5 Contract Terms and Conditions Required to Implement Statutes or Executive Orders'Commercial Products and Commercial Services (Jun 2023), applies to this acquisition. 10. Defense Priorities and Allocation System (DPAS): N/A 11. Quote Submission Information: It is the government's intent to award without discussions. Therefore, each initial quote should contain the offeror's best terms from a price and technical standpoint. However, the government reserves the right to conduct discussions if the Contracting Officer (CO) determines that discussions are necessary. Offers are due by 5 Jun 2024, 5:00 PM, Pacific Daylight Time (PDT). Send to: Denina Hudson, Contract Specialist, denina.hudson@us.af.mil and Kimberly McGee, Contracting Officer, kimberly.mcgee@us.af.mil. No late submissions will be accepted.