Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

Flow Control Slide Gates Installation

Active
State & Local

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

Paulding County Government is soliciting a subcontract to supply and install two flow control slide gates designed to manage wastewater flow within the local system. The contract is open for responses until July 31, 2026, with the opportunity posted on July 1, 2026, and is classified under NAICS code 332913, indicating it involves the manufacturing of other fabricated metal products. The work must be performed in Georgia, though specific city or zip details are not provided. The project is part of the county’s infrastructure efforts to enhance wastewater management capacity and efficiency, requiring qualified contractors with experience in hydraulic control systems and industrial valve installations. Submission must adhere to the deadline, and interested parties can access additional details through the official state procurement portal link.

General Info

Paulding County seeks subcontractor to install two wastewater flow control gates in Georgia by July 31, 2026.

Agency

Georgia → Paulding County GovernmentView Agency

NAICS

332913 - Plumbing Fixture Fitting and Trim ManufacturingView NAICS

Place of Performance

GA, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

Posted

subcontract

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyGeorgia → Paulding County Government
ContactsNo contacts available
OfficeN/A
Organization / Agency
Georgia → Paulding County Government
View Agency Profile
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Supply and install two flow control slide gates for managing wastewater flow within the system.

Similar Contracts

Same NAICS industry code

NAICS: 332913
New
DIBBS
SLEEVE, STRAINERThe contract pertains to the procurement of two sleeve strainers identified by NSN 1615-01-240-5451, issued under solicitation number SPE4A6-26-T-09PP by the Defense Logistics Agency on behalf of the Department of Defense. The solicitation was posted on July 26, 2026, with a response deadline of August 3, 2026, indicating a competitive procurement process open to qualified vendors. The item is classified under a federal procurement action with no specified set-aside criteria or NAICS code, suggesting it is open to general industry participation without preferential targeting. The place of performance and point of contact details are not provided, but the procurement originates from a U.S. federal agency and is accessible via the DIBBS platform for full solicitation documentation.
Defense Logistics Agency

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332913
New
DIBBS
FLAME ARRESTER, VENTA flame arrester vent with NSN 2040-01-509-9539 is being procured under a federal solicitation issued by the Defense Logistics Agency on behalf of the Department of Defense. The request, identified by purchase request number 7017607523, specifies a single unit required for use in a military or defense-related application. The solicitation titled FLAME ARRESTER, VENT was posted on July 26, 2026, with a response deadline of August 6, 2026, under solicitation number SPE7M4-26-T-285S. The procurement does not include a set aside classification or NAICS code, indicating it is open to all eligible contractors. The place of performance and office address details are unspecified, but the contracting activity is based in the United States. Interested parties can access the full solicitation details through the official DIBBS platform using the provided UI link.
Defense Logistics Agency

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332913
New
DIBBS
ELBOW, HOSE TO BOSSThe contract pertains to the procurement of an elbow fitting, specifically designed to connect a hose to a boss, identified by the NSN 4730-01-477-1317, with a requested quantity of one unit. The solicitation is issued under reference number SPE7M0-26-T-018G by the Defense Logistics Agency, a division of the Department of Defense, and was posted on July 26, 2026. Respondents must submit their proposals by the deadline of August 6, 2026. The acquisition is classified as a federal solicitation with no designated set-aside provisions or NAICS code specified. Performance of the contract is expected to occur within the United States, though no specific city or state is delineated. The full solicitation details and submission portal can be accessed via the provided DIBBS online link.
Defense Logistics Agency

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332913
New
Federal
45--STRAINER,WASTE DRAIThe U.S. Department of Defense, through DLA Troop Support, is seeking quotations for 260 units of NSN 4510016493042, STRAINER,WASTE DRAI, under solicitation SPE8E826T4851. This procurement is a total small business set-aside, restricted solely to small businesses as defined by the SBA, and the NAICS code 332913 applies. Quotes must be submitted electronically by the deadline of August 6, 2026, and only responsible sources are eligible to respond. Delivery is required to W1A8 DLA DISTRIBUTION within 72 days after contract award. The approved source for this item is 57701 DD 20 C 100, though no specifications, plans, or drawings are available. The solicitation is posted online only and cannot be obtained in hard copy. All inquiries must be directed via email to the point of contact listed in the solicitation document, accessible through the provided SAM.gov link. The contracting office is located in Philadelphia, Pennsylvania.
DLA Troop Support

POSTED

about 9 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332913
New
International
Pipe Fittings Supply (Valves, Couplings, Bends, Tees)The contract entails the supply of ductile iron fittings for pipeline assembly, including mechanical joints, flanged ends, bends, tees, and gate valves, all required to meet industry standards for durability and performance in water distribution systems. The scope emphasizes component integrity and compatibility with existing infrastructure, ensuring seamless integration during installation and long-term operational reliability. Deliverables must be fully compliant with technical specifications related to pressure ratings, material composition, and joint sealing mechanisms to guarantee system safety and efficiency. The opportunity is issued as a subcontract by the National Water Commission under the Government of Jamaica, with a posted date of July 24, 2026, and a response deadline of August 19, 2026, at 4:00 PM. The North American Industry Classification System code 332913 indicates the focus on pipe and tube fitting manufacturing. While no set-aside provisions or specific location details are provided, the place of performance is expected to support national water infrastructure projects across Jamaica. Interested suppliers must submit proposals through the official ePPS portal prior to the deadline to be considered for award.
National Water Commission

POSTED

2 days ago

DEADLINE

in 24 days
View Details
NAICS: 332913
New
SLED
Cast Iron Curb Inlet Supply and InstallationThe contract involves the supply and installation of cast iron curb inlets for storm drainage systems under a subcontract arrangement administered by the Mississippi Department of Finance and Administration through its MPTAP division. The solicitation was posted on July 24, 2026, with a firm response deadline of August 25, 2026, and is classified under NAICS code 332913, which pertains to other fabricated metal product manufacturing. The work is intended for infrastructure applications within Mississippi, though specific locations are not detailed in the data provided. Eligible contractors must prepare and submit proposals by the deadline to meet technical and performance requirements for casting, delivery, and installation of the curb inlets, ensuring compliance with applicable engineering and durability standards for stormwater management systems.
MPTAP

POSTED

2 days ago

DEADLINE

in 30 days
View Details
NAICS: 332913
New
DIBBS
Gate Valve Manufacturing & SupplyThe contract entails the manufacture and delivery of a single gate valve compliant with military specifications, requiring full adherence to defined quality, performance, and testing standards. The scope includes proper packaging, labeling, and shipment directly to a U.S. Navy vessel operating in the Pacific, with the place of performance listed as FPO, 09523. The work must be completed under a subcontract arrangement, governed by the Defense Logistics Agency under the Department of Defense, and classified under NAICS code 332913 for other fabricated metal product manufacturing. All deliverables must meet stringent military requirements to ensure operational readiness and compatibility with naval systems. The solicitation was posted on July 24, 2026, with responses due by July 29, 2026, indicating a tight turnaround for proposal submission and potential award.
Defense Logistics Agency

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 332913
New
Federal
High-Purity Piping and Fittings SupplyThe contract seeks the supply of electropolished 316L stainless steel tubing, fittings, and valves designed to meet stringent high-purity water standards, ensuring compatibility with demanding cleanroom and semiconductor-grade environmental requirements. All materials must be manufactured and processed to eliminate surface contaminants and maintain optimal purity levels, with final packaging and handling strictly adhering to cleanroom protocols to prevent particulate or chemical degradation during transport and installation. The products are intended for use in critical infrastructure applications requiring corrosion resistance, smooth surface finishes, and compliance with industry benchmarks for ultra-pure fluid systems. The opportunity, issued under the title High-Purity Piping and Fittings Supply, is a subcontract with a response deadline of July 31, 2026, and was posted on July 24, 2026. It falls under NAICS code 332913, indicating classification within pipe and tube fitting manufacturing. The contract is administered by ORNL UT-Battelle LLC, a Department of Energy contractor, with performance expected to be delivered to Oak Ridge, Tennessee, ZIP 37830. No specific set-aside designation is indicated, and while point of contact details are not provided, the solicitation is accessible via the SAM.gov platform for interested parties to review full requirements and submission guidelines.
Ornl Ut-Battelle Llc-Doe Contractor

POSTED

2 days ago

DEADLINE

in 5 days
View Details
NAICS: 332913
New
Federal
ENID-Remove/Replace Components Sewer Pump StationThe U.S. Army Corps of Engineers, Vicksburg District, is soliciting quotes for the removal and replacement of components at the Enid Lake sewer grinder pump station under solicitation W912EE26QA031, issued as a Firm-Fixed Price contract with a 100% Small Business Set Aside. The North American Industry Classification System code is 332913, and the small business size standard is set at 1,000 employees. Contractors must provide all labor, tools, equipment, transportation, materials, and incidentals required to fully decommission the existing sewer pump station and install a new, fully operational duplex grinder pump station in strict compliance with the Statement of Work. All submissions must include the required bidding schedule and be submitted electronically to Jasmine Lewis at Jasmine.Lewis@usace.army.mil prior to the closing deadline of August 7, 2026, at 5:00 PM Central Time. Offers that lack complete documentation or fail to comply with submission requirements risk disqualification. Technical inquiries must be submitted through the ProjNet Bidder Inquiry System using the provided key UYVQ43-VKAIXN, and potential offerors are strongly encouraged to register early and submit questions well before the deadline, as inquiries made within the final 72 hours are not guaranteed a response. The government reserves the right to award without discussions and expects offerors to submit their best initial pricing. The evaluation will prioritize compliance with RFO 52.212-2, which governs the assessment of commercial product bids. Offerors must monitor SAM.gov for any amendments and ensure timely delivery of proposals. The place of performance is in Mississippi, and all work must meet the technical and operational specifications outlined by the U.S. Army Corps of Engineers. Point of contact for procurement matters is Jasmine Lewis, with Dustin G. Cannada available for secondary support.
W07V Endist Vicksburg

POSTED

2 days ago

DEADLINE

in 12 days
View Details
NAICS: 332913
New
Federal
DRAIN STR/ORIFICEThis contract pertains to the procurement of a 1-inch, 900 PSI, steam socketweld drain strainer/orifice designated as SPECIAL EMPHASIS Level I material, critical to shipboard systems where failure could result in catastrophic loss of life, vessel, or vital equipment. The item must strictly comply with Naval Sea Systems Command Drawing 803-5001057 and associated revisions, with specific modifications including a precisely sized 0.375 ± 0.001 inch thru-hole in the orifice plate. The contract mandates rigorous material certification, requiring quantitative chemical and mechanical analysis for key components such as the body and cap made from ASTM-A182 Grade F316, and studs and nuts conforming to MIL-DTL-1222 with phosphate or zinc plating in accordance with specified notes. All fabrication processes, including welding, brazing, heat treatment, and thread forming, must adhere to approved military and industry standards like S9074-AQ-GIB-010/248, S9074-AR-GIB-010A/278, and MIL-STD-2035, with full procedure qualification and documentation required prior to production. Hydrogen embrittlement relief is mandatory for plated fasteners exceeding specified hardness limits, and all traceable materials must maintain legible, permanent markings linked to certified test reports. Quality assurance is comprehensive and non-negotiable, requiring full compliance with ISO-9001 and ISO-10012 or MIL-I-45208 and MIL-STD-45662, with government inspection at the contractor’s facility. All material must be traceable from raw stock through every manufacturing step to final assembly, with unique identifiers tied to certification data and verified 100% prior to shipment. Testing includes hydrostatic pressure, liquid penetrant, magnetic particle, visual, and dye penetrant inspections at specified weld joints, with acceptance criteria strictly defined. Certification of compliance must include signed statements of full conformance, with electronic signatures permitted under controlled, verified processes, and disclaimers like “to the best of our knowledge” are prohibited. Receiving inspections require zero-defect acceptance criteria using ANSI/ASQ Z1.4 sampling standards unless the lot is small. All certifications and documentation must be submitted via the Wide Area Work Flow system to designated Navy addresses with mandatory electronic notifications, and no material may be shipped
Navsup Weapon Systems Support Mech

POSTED

2 days ago

DEADLINE

in 22 days
View Details
NAICS: 332913
New
DIBBS
Supply of Lift-Check Valve (NSN 4820014251019)The contract seeks the manufacture or supply of four lift-check valves complying with military specifications under NSN 4820014251019, requiring strict adherence to technical performance standards and domestic sourcing requirements to ensure all components originate within the United States. The vendor must handle hazardous materials in accordance with federal regulations and provide complete documentation verifying compliance, including material certifications, test results, and traceability records for all parts and processes. The valves are intended for use within the Department of Defense infrastructure, with performance occurring at Jacksonville, Florida, under the oversight of the Jacksonville BLDG office. Subcontractors are eligible to respond, and the opportunity is open until August 3, 2026, with no specific set-aside criteria outlined, meaning all qualified entities may participate regardless of small business status or other classifications. All submissions must demonstrate full capability to meet the stringent military-grade requirements for functionality, durability, and safety.
JACKSONVILLE BLDG

POSTED

3 days ago

DEADLINE

in 8 days
View Details
NAICS: 332913
New
DIBBS
Supply of Restricted-Source Lift-Check Valve (P/N 73587J)The contract solicits the manufacture or supply of 22 units of a government-restricted lift-check valve identified by part number 73587J and national stock number 4820010589728, with engineering source approval required prior to award. All units must meet stringent military packaging and marking standards and be compliant with hazardous materials labeling regulations. The acquisition is structured as a subcontract under a Total Small Business Set-Aside classification, exclusively reserved for small businesses as defined by the SBA, and falls under NAICS code 332913 for industrial valve manufacturing. The opportunity was posted on July 23, 2026, with bids due by August 3, 2026, and performance is to be carried out at Tracy, California, with a zip code of 95304-5000. The contracting authority is the DLA Dist San Joaquin under the Department of Defense, though no point of contact details are provided in the public posting.
DLA DIST SAN JOAQUIN

POSTED

3 days ago

DEADLINE

in 8 days
View Details

More opportunities from Georgia → Paulding County Government

Same awarding agency

NAICS: 541620
SLED
Erosion Control and Permanent GrassingThe contract requires the installation and ongoing maintenance of erosion control measures throughout the duration of construction activities, ensuring compliance with environmental protection standards to prevent sediment runoff and soil degradation. Upon project completion, the contractor must perform permanent grassing of all disturbed areas to establish stable vegetation that mitigates long-term erosion risks. The work is classified as a subcontract under NAICS code 541620, indicating it involves environmental consulting and related services tied to land and site management. The opportunity is posted by Paulding County Government in Georgia with a response deadline of July 31, 2026, and interested parties must submit their proposals by that date. The place of performance and specific site details are not provided in the contract data, but work will occur within Paulding County. The solicitation is accessible via the provided online link for further information and submission instructions.
Environmental Consulting Services

POSTED

25 days ago

DEADLINE

in 5 days
View Details
NAICS: 238210
SLED
Electrical Work for Control SystemsThe contract is for electrical work related to the installation of wiring, conduit, control panels, and instrumentation for bar screen, conveyor, and flow control systems, under NAICS code 238210, which classifies it as electrical contracting. It is listed as a subcontract with a response deadline of July 31, 2026, and was posted on July 1, 2026, with the performing agency being Paulding County Government in Georgia. The scope requires precise coordination of electrical components to support automated water and material handling systems, ensuring reliability and compliance with industrial control standards. All work must be completed at the designated location under the authority of the county government, with no specific set-aside provisions identified and no designated point of contact provided. The contract opportunity can be accessed via the provided state procurement portal link.
Electrical Contractors and Other Wiring Installation Contractors

POSTED

25 days ago

DEADLINE

in 5 days
View Details
NAICS: 238110
SLED
Earthwork and Concrete PavingThe contract entails earthwork, grading, and concrete paving activities at the site where a bar screen system will be installed, requiring precise preparation of the ground to support the structural and operational needs of the system. The work must be executed in accordance with technical specifications and industry standards to ensure long-term durability and functionality of the paved surfaces and graded terrain. All tasks are to be completed at the designated installation location under the oversight of Paulding County Government in Georgia. Bids are due by July 31, 2026, with the opportunity posted on July 1, 2026, and classified as a subcontract under NAICS code 238110, indicating it falls within the foundation, structure, and building exterior contractors category. There is no set-aside designation specified, and the solicitation number is not provided, but interested parties can access additional details through the provided online link. The contract does not include specific location details such as city, state, or ZIPCode, but performance is expected within Paulding County, Georgia.
Poured Concrete Foundation and Structure Contractors

POSTED

25 days ago

DEADLINE

in 5 days
View Details
NAICS: 238290
SLED
Heat Tracing and Insulation for PipingPaulding County Government is seeking a subcontractor to install heat tracing and insulation on exposed outdoor piping to prevent freezing under ambient conditions. The work scope is focused solely on protecting piping from cold weather damage through the application of properly engineered heating elements and thermal insulation systems. The solicitation was posted on July 1, 2026, with responses due by July 31, 2026, and is classified under NAICS code 238290 for other special trade contractors. The contract is designated as a subcontract without any specific set-aside provisions, and the performance location is within Georgia, though exact geographic details are unspecified. All work must comply with applicable standards for climate protection and safety in outdoor environments. Interested parties can access further details through the provided state system link.
Other Building Equipment Contractors

POSTED

25 days ago

DEADLINE

in 5 days
View Details
NAICS: 238220
SLED
Water Service and Backflow Prevention SystemThe contract entails the installation of a complete water service and backflow prevention system including one-inch polyethylene and copper piping for water service, a water meter, a reduced pressure zone backflow preventer, a yard hydrant, necessary valves, and all associated appurtenances. The work must be performed to meet applicable standards and ensure safe, reliable potable water delivery with proper protection against contamination. All materials and installation practices are expected to comply with industry best practices and local regulatory requirements. This is a subcontract opportunity issued by Paulding County Government in Georgia, with a solicitation posted on July 1, 2026, and responses due by July 31, 2026. The NAICS code 238220 categorizes the work under plumbing, heating, and air-conditioning contractors. The place of performance and exact location details are not specified but are implied to be within Paulding County. Interested parties must submit their proposals through the provided state portal before the deadline to be considered.
Plumbing, Heating, and Air-Conditioning Contractors

POSTED

25 days ago

DEADLINE

in 5 days
View Details
NAICS: 237110
SLED
PVC Sewer Line and Manhole InstallationThe contract requires the installation of 94 linear feet of 10-inch SDR 26 PVC sewer line and one precast concrete manhole, with the work necessitating a proper connection to an existing sanitary sewer system. The project is classified under NAICS code 237110, indicating it falls within the sewer system construction sector, and is structured as a subcontract opportunity. All work must be completed in accordance with applicable standards for materials and installation practices to ensure long-term functionality and compliance with municipal infrastructure requirements. The solicitation was posted on July 1, 2026, and responses are due by July 31, 2026, allowing potential contractors a 30-day window to submit proposals. The contracting entity is Paulding County Government in Georgia, though specific location details such as city, state, or zip code for the place of performance are not provided. The opportunity is accessible via a public portal, and while no point of contact or set-aside provisions are listed, interested bidders are expected to review the full solicitation on the provided link to confirm technical specifications, submittal requirements, and any additional conditions governing the award and execution of the work.
Water and Sewer Line and Related Structures Construction

POSTED

25 days ago

DEADLINE

in 5 days
View Details
NAICS: 333242
SLED
Compactor Conveyor System Supply and InstallationPaulding County Government is seeking a subcontractor to furnish and install a compactor conveyor system designed to manage screenings generated by the bar screen at its facility. The project requires full mechanical and electrical integration of the system, ensuring seamless operation within existing infrastructure. The solicitation, issued under NAICS code 333242 for other commercial and industrial machinery and equipment manufacturing, is open for bids with a deadline of July 31, 2026, and was posted on July 1, 2026. The work must be performed at the county’s facility in Georgia, with no specified place of performance details beyond the state. This is a non-set-aside subcontract opportunity, and all proposers must deliver a system that meets technical, safety, and operational requirements for reliable, long-term use in wastewater or solids processing applications.
Semiconductor Machinery Manufacturing

POSTED

25 days ago

DEADLINE

in 5 days
View Details
NAICS: 238990
SLED
Traffic Control and Temporary FacilitiesPaulding County Government in Georgia is seeking a subcontractor to provide temporary traffic control services, signage, and job site facilities to support construction activities. The contract falls under NAICS code 238990 and is open for bid with a response deadline of July 31, 2026. Work will be performed in alignment with local construction requirements, though specific location details within the county are not outlined. The solicitation does not specify a set-aside classification or preferential treatment for small or disadvantaged businesses. Interested parties must submit proposals by the stated deadline through the official Georgia state procurement portal. All services must ensure the safety of workers and the public while maintaining minimal disruption to traffic flow during construction operations.
All Other Specialty Trade Contractors

POSTED

25 days ago

DEADLINE

in 5 days
View Details
NAICS: 333911
SLED
Mechanical Wastewater Bar Screen InstallationThe contract involves the supply and installation of a mechanical wastewater bar screen within a precast concrete structure, designed to integrate seamlessly with existing infrastructure at a facility operated by Paulding County Government in Georgia. The scope includes delivering, assembling, and commissioning the bar screen system to ensure compatibility with current wastewater handling systems, with all work performed in accordance with technical and operational specifications required for reliable, continuous performance. The equipment must meet industry standards for durability, efficiency, and maintenance accessibility in a municipal wastewater environment. The solicitation is classified as a subcontract, with responses due by July 31, 2026, and was posted on July 1, 2026. It falls under NAICS code 333911, which pertains to other sanitary equipment manufacturing, indicating the focus is on the production and installation of specialized wastewater treatment components. There is no set-aside designation specified, and all performance must occur at the designated site within Paulding County. The project requires a contractor with proven experience in mechanical wastewater systems and integration into preexisting concrete infrastructure, though no specific point of contact or detailed location information is provided beyond the state jurisdiction.
Pump and Pumping Equipment Manufacturing

POSTED

25 days ago

DEADLINE

in 5 days
View Details
NAICS: 237110
SLED
Bid No. 27002-0901, Paulding County Jail Bar ScreenPaulding County is soliciting sealed bids for the installation of a new mechanical wastewater bar screen at the Paulding County Jail, covering a comprehensive scope of civil, mechanical, electrical, and utility work. The project includes installation within an 8-foot diameter precast concrete structure, a compactor conveyor system, two flow control slide gates, 94 linear feet of 10-inch SDR 26 PVC sewer line, a precast concrete manhole, and a connection to an existing manhole. Additional requirements encompass water service installation with 1-inch PE and copper piping, a meter, an RPZ backflow preventer, a yard hydrant, valves, heat tracing, and insulation for exposed piping. The scope also involves earthwork, concrete paving, erosion control measures, temporary facilities, wastewater flow control, traffic control, permanent grassing, and all other work detailed in the drawings and specifications. The contractor is responsible for furnishing all materials and performing every aspect of the work in full compliance with the provided plans and technical requirements. Bids must be submitted in response to Solicitation Number PE-77892-NONST-2027-000000085, with a response deadline of July 31, 2026, at 3:00 PM. The solicitation is open to qualified contractors and issued by the Paulding County Board of Commissioners under the Georgia state government. All work is to be performed at the Paulding County Jail location in Georgia. Questions or inquiries should be directed to Tara Goldin, the primary point of contact, via phone at 678-224-4028 or email at tgoldin@paulding.gov. The full solicitation details and related documents are accessible through the official Georgia e-procurement portal.
Water and Sewer Line and Related Structures Construction

POSTED

25 days ago

DEADLINE

in 5 days
View Details