Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

Food Equipment Ft Lee

Active
7017590626Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The U.S. Department of Defense, through DLA Troop Support, has issued a request for interest regarding food service equipment and potential installation services at Fort Lee, Virginia. This is not a formal solicitation but an informational gathering to assess industry capability and interest. The equipment under consideration includes a wide range of food service items such as pizza preparation refrigerators, conveyor ovens, roll-in refrigerators, heated food warmer shelves, mobile counters with sneeze guards, mobile pleate and dish dispensers, hot food wells, heated cabinets, work tables, possible modifications to existing food stations, rotisserie ovens, induction ranges, refrigerated display cases, sandwich and salad preparation refrigerators, wire shelving, soup kettles, ice makers, pizza pans, small wares, containers, and china sets. Interested parties must respond by the deadline of August 7, 2026, at 7:00 PM Eastern Time, with submissions directed to the primary point of contact, Adam Pollini, at adam.pollini@dla.mil or 215-737-0766, with Timothy Coyle as the secondary contact. The office handling this request is located in Philadelphia, Pennsylvania, and the anticipated performance location is Fort Lee, Virginia. This request seeks feedback on availability, lead times, and technical specifications to inform a potential future solicitation.

General Info

DOD seeks industry interest in food service equipment and installation at Fort Lee, Virginia, with responses due August 7, 2026.

Agency

Department Of Defense → DLA Troop SupportView Agency

NAICS

337215 - Showcase, Partition, Shelving, and Locker ManufacturingView NAICS

Place of Performance

Fort Lee, VA, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseSources Sought
Posted

Sources Sought

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DLA Troop Support
Contacts2 people available
OfficePHILADELPHIA, PA, 19111-5096, USA
Organization / Agency
Department Of Defense → DLA Troop Support
View Agency Profile
Office AddressPHILADELPHIA, PA, 19111-5096, USA
Contacts
Adam Pollini
contact@example.gov
+1 (555) 000-0000
Timothy Coyle
contact@example.gov
+1 (555) 000-0000

Full Description

Show more

This is a request for interest, not an open solicitation, for various food service equipment and installation at Ft. Lee, VA.  If turned into a solicitation at a later time the following are examples of the various food service equipment to be requested: Pizza Preparation Refrigerators, Conveyor Ovens, Roll-in Refrigerators, Heated Food Warmer Shelves, Mobile Counters and Sneeze Guards, Mobile Pleate and Dish Dispensers, Hot Food Wells, Mobile Heated Cabinets, Work Tables, Possible Modifications to Existing Food Stations, Rotisserie Ovens, Induction Ranges, Regrigerated Display Cases, Sandwich/Salad Preparation Refrigerators, Various Wire Shelving, Soup Kettles, Ice Makers, Pizza Pans, Various Small Wares, Containers, and China Sets. 

Similar Contracts

Same NAICS industry code

NAICS: 337215
New
Federal
Battery Storage Adjustable Racking System
Solicitation # 08032026
This solicitation, numbered 08032026, seeks commercial-grade battery storage adjustable racking systems under a total small business set-aside, with the North American Industry Classification System code 337215 and a size standard of 500 employees. The requirement is for high-density, heavy-duty industrial roll-out shelving designed specifically for battery storage at Edwards Air Force Base, California, and all proposals must meet the mandatory salient characteristics outlined in the attached specifications. The government will award a single firm-fixed-price contract to the offeror providing the most advantageous value, evaluating price along with technical capability, delivery terms, and warranty. Only registered small businesses in SAM.gov are eligible, and submissions must include required contractor information such as CAGE code, payment terms, point of contact, warranty details, and proof of CMMC Level 1 foundational compliance via the SPRS module, effective November 10, 2025. Proposals must be submitted electronically by 9:00 AM Pacific Daylight Time on August 10, 2026, to the designated email addresses, with no late submissions accepted. Offerors must comply with FAR 52.212-1, include all documentation per the solicitation, and conform to the evaluation criteria in 52.212-2 and its addendum. The contract will include a comprehensive array of clauses covering cybersecurity compliance, small business representation, prohibitions on Chinese military-linked and Xinjiang-sourced products, anti-trafficking, sustainable procurement, electronic payment requirements, and defense-related supply chain restrictions under DFARS, including NIST SP 800-171 and cyber maturity assessments. Delivery is required within 90 days of award, and all contractors must have current SAM registration and meet the mandatory representation and certification requirements outlined in the solicitation provisions and clauses. Questions must be submitted by August 6, 2026, at 12:00 PM PDT.
FA9301 Aftc Pzio

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 337215
New
Federal
Mobile Storage Bench Supply and InstallationThe contract calls for the supply and installation of a mobile storage bench with an integrated cabinet specifically designed for use in the Security Forces Armory, ensuring secure and organized storage of sensitive equipment. The unit must be permanently secured to both the floor and walls with anchoring systems that meet stringent military safety and durability standards. Comprehensive securement testing is required to verify the stability and resistance of the unit under operational conditions, ensuring it remains immobile and tamper-resistant in high-security environments. All components must be engineered to withstand heavy use and environmental stresses typical of armory settings. The contract is classified as a subcontract under NAICS code 337215, which pertains to other metal product manufacturing, indicating the need for custom-built, high-quality metal fabrication. The solicitation was posted on July 31, 2026, with a response deadline of August 21, 2026, at 4:00 PM. The place of performance is located at a facility with the zip code 73705, which corresponds to a Department of Defense site. The awarding agency is FA3029 71 Ftw Cvc, operating under the Department of Defense, and the work must be completed in accordance with federal defense specifications without the use of any set-aside provisions.
FA3029 71 Ftw Cvc

POSTED

4 days ago

DEADLINE

in 17 days
View Details
NAICS: 337215
New
Federal
Heavy-Duty Boltless Steel Shelving SupplyThe contract requires the supply of five heavy-duty static boltless steel shelving units designed for customer assembly, with all units must comply with MHI MH28.2 and UFGS 10-56-13 standards to ensure structural integrity and operational safety in military and defense environments. The shelving units are intended for delivery to a specified performance location in Wilmington with a ZIP code of 19804, and the successful vendor is responsible for ensuring the products meet all technical specifications and are ready for end-user installation without requiring professional setup. This solicitation is classified as a subcontract under a Small Business Set Aside, specifically designated as a Total Set Aside, meaning only small businesses are eligible to bid, and the North American Industry Classification System code 337215 identifies the industry as Furniture and Fixtures Manufacturing. The opportunity was posted on July 31, 2026, with responses due by August 26, 2026, and is managed by the Department of Defense under the W7M0 Uspfo Activity De Arng, indicating this procurement supports federal defense infrastructure needs.
W7M0 Uspfo Activity De Arng

POSTED

4 days ago

DEADLINE

in 22 days
View Details
NAICS: 337215
New
Federal
CSO: Pallet Rack and Secure Storage Design-Build for Existing Delaware Army National Guard Facility
Solicitation # W912L5-26-S-C002
The Commercial Solutions Opening solicitation W912L5-26-S-C002 seeks an innovative design-build solution from a small business to furnish and install industrial-grade organizational storage systems in a newly constructed, unoccupied facility at 1401 Newport Gap Pike, Wilmington, DE 19804. The scope includes the supply and installation of fixed selective pallet racks, secure wire mesh partition cages, and heavy-duty static boltless steel shelving, with a requirement that 65 percent of the solution meet specific technical specifications to ensure durability, functionality, and compliance with military storage standards. This solicitation is a Small Business Set Aside under NAICS code 337215, directed by the Department of Defense through the Office of the Delaware Army National Guard. Responses are due by August 26, 2026, at 3:00 PM ET, with the opportunity to submit proposals through SAM.gov and access supporting documentation via the posted link. A non-mandatory site visit is scheduled for August 18, 2026, at 2:00 PM ET, during which participants can review the physical location and obtain hard copy as-built drawings of the facility; advance registration with names and company affiliations must be submitted to Joseph Scarpa by 2:00 PM ET on August 17. For digital access to the drawing set, interested parties must submit company identifying information through the attachments section of the SAM.gov posting, after which the government will vet the request and provide the PDF within approximately 24 hours. Primary point of contact is Joseph Scarpa at Joseph.Scarpa6.CIV@army.mil or 302-326-7365, with Amy Kline as secondary contact. All proposals must align with the specified technical requirements and demonstrate a commercially available, ready-to-deploy solution tailored to the unique conditions of the Delaware Army National Guard’s storage facility.
W7M0 Uspfo Activity De Arng

POSTED

4 days ago

DEADLINE

in 22 days
View Details
NAICS: 337215
New
Federal
71 SFS Armory Weapons Racks, Vance AFB
Solicitation # 213328-VAFB
ASRC Federal Gulf State Constructors, LLC is soliciting quotes on behalf of the U.S. Government for the purchase and installation of specific weapons storage racks and a mobile storage bench at the Security Forces Armory, Building 527, Vance Air Force Base in Enid, Oklahoma. The required items include seven UWR4 M4 rifle and M18 pistol storage racks, two UWR1 rifle components, one UWR2 night vision storage unit, one UWR3 ammunition storage unit, one UWR5 magazine ammunition storage unit, two UWR6 NVG and individual equipment storage units, and one mobile storage bench with cabinet. All items must be supplied exactly as listed or as equal alternatives aligned with the Statement of Work. The contractor is responsible for providing all labor, materials, and equipment, including mounting, testing, and inspecting the installed components to ensure proper securement and locking function. The work must be completed Monday through Friday between 0800 and 1700, with a lead time of 18 to 20 weeks after order receipt, and the contractor must clean the work area and remove all debris. Submittals are required prior to ordering, and the contractor assumes full liability for any damage incurred during installation. Hazardous materials used require MSDS documentation. Award will be made to the lowest priced technically acceptable offeror, with technical acceptability dependent on full compliance with the Statement of Work, proven ability to deliver and install all listed components, and adherence to the specified delivery schedule. Previous experience with similar installations is preferred but not mandatory. All offerors must be actively registered in the System for Award Management at the time of submission, and quotes must be emailed to Betty Kliewer no later than August 21, 2026, at 11:00 AM CST; no late submissions will be accepted. Questions must be submitted via the provided Q&A form by close of business on August 10, 2026. The solicitation is open to all qualified vendors with no set-aside provisions, and the North American Industry Classification System code is 337215. The government retains the right to cancel the solicitation at any time without obligation to reimburse offerors for incurred costs. Attachments include the Statement of Work, General Terms and Conditions, Annual Representations and Certifications, Wage Determination, and the Q&A Form.
FA3029 71 Ftw Cvc

POSTED

4 days ago

DEADLINE

in 17 days
View Details
NAICS: 337215
New
International
E60HN-26CFWL - RFSO - Weapon Lockers
Solicitation # WS5760989938
The contract titled E60HN-26CFWL - RFSO - Weapon Lockers is a federal solicitation issued by the Government of Canada through the Department of Public Works and Government Services, with the solicitation number WS5760989938. It was posted on July 23, 2026, and requires responses to be submitted no later than August 12, 2026, at 7:00 PM Eastern Time. The procurement falls under NAICS code 337215, which relates to the manufacturing of metal furniture, indicating the requirement is for standardized weapon storage units designed to meet specific federal security and operational specifications. Performance of the contract is expected to service locations across Canada, with no specific city designated beyond the country-wide scope. Alexandra Nadeau, Contracting Authority with Public Services and Procurement Canada, is the primary point of contact for inquiries and can be reached via email at alexandra.nadeau@tpsgc-pwgsc.gc.ca. There is no set-aside provision identified for small businesses or other designated categories, and the solicitation is open to all eligible federal vendors. Additional details and documentation can be accessed through the official Canada Buys portal using the provided UI link.
Department of Public Works and Government Services

POSTED

4 days ago

DEADLINE

in 8 days
View Details
NAICS: 337215
New
SLED
Millwork and Specialty FabricationThe contract involves the supply and installation of custom cabinets, built-in furniture, and architectural millwork specifically tailored for clinical and office environments at UC Davis Health in Sacramento, California, with a zip code of 95817. The work falls under NAICS code 337215, indicating it is classified as millwork fabrication, and is structured as a subcontract requiring precise craftsmanship to meet the functional and aesthetic demands of healthcare and administrative spaces. The solicitation was posted on July 30, 2026, with a firm response deadline of August 24, 2026, providing interested parties with approximately four weeks to prepare and submit proposals. The location of performance is clearly defined as Sacramento, ensuring contractors must be prepared to deliver and install materials on-site within this geographic scope. The contract does not specify a set-aside designation or overarching agency organizational structure beyond the parent institution, placing the emphasis squarely on the technical execution and quality of the millwork and cabinetry systems.
University of California – UC Davis Health

POSTED

5 days ago

DEADLINE

in 20 days
View Details
NAICS: 337215
New
Federal
Office Seating Supply – Task and Conference ChairsThe contract seeks the supply of ergonomic task chairs, conference seating, and guest chairs that comply with federal procurement requirements and BIFMA standards, ensuring durability, safety, and ergonomic design for government use. All products must meet strict quality benchmarks to support workplace health and efficiency across federal facilities. The opportunity is classified as a subcontract under a Small Business Set Aside, total, meaning only small businesses certified by the SBA are eligible to bid. The NAICS code 337215 identifies the industry as Office Furniture and Fixtures Manufacturing, indicating the focus on manufactured seating solutions rather than distributors or resellers. The solicitation was posted on July 30, 2026, with a response deadline of August 14, 2026, at 7:00 PM Eastern Time. The place of performance is listed as zip code 94535, indicating delivery will be required to a specific location in California. The contracting agency is the Department of Defense under the office designation FA4427 60 Cons Lgc, though no point of contact or detailed address information is provided. Interested parties must submit proposals through the SAM.gov portal linked in the posting and ensure full compliance with federal procurement regulations, including product certifications and small business status verification.
FA4427 60 Cons Lgc

POSTED

5 days ago

DEADLINE

in 10 days
View Details
NAICS: 337215
New
Federal
Custom Museum Case and Exhibit Furniture FabricationThe contract is for the design, engineering, and construction of custom display cases, pedestals, platforms, and exhibit furniture specifically tailored for museum and heritage environments, requiring the use of conservationally sound, archival-quality materials that meet rigorous museum standards to ensure the long-term preservation of sensitive artifacts. All work must adhere to industry best practices for environmental control, material stability, and non-reactive construction techniques to safeguard cultural heritage items from degradation caused by light, humidity, off-gassing, or physical stress. This is a subcontract classified under the Small Business Set Aside - Total category with a NAICS code of 337215, indicating it is reserved exclusively for small businesses. The opportunity was posted on July 30, 2026, with a response deadline of August 14, 2026, and is managed by the Defense Health Agency under the Department of Defense. Performance of the work is required to take place in Silver Spring, Maryland, with a zip code of 20910. While specific financial details or point of contact information are not provided, interested parties must ensure full compliance with federal contracting requirements and exhibit fabrications that align with institutional conservation protocols.
Defense Health Agency

POSTED

5 days ago

DEADLINE

in 10 days
View Details
NAICS: 337215
New
SLED
Vertical Storage Units (2)
Solicitation # IFB No. 176019A
Metra is seeking proposals for two vertical storage units through solicitation IFB No. 176019A, which was posted on July 30, 2026, with a response deadline of September 9, 2026, at 7:00 PM. The requirement is for the supply of two vertical storage units to be delivered and performed within Illinois, with no specific city or zip code designated for the place of performance. The solicitation does not specify a NAICS code, type of set-aside, or organization type, indicating an open competition without restrictions based on business size or demographics. All responses must be submitted electronically via the provided BonfireHub portal by the stated deadline, and no point of contact information is listed in the posting, suggesting that inquiries should be handled through the online platform. The contract is not tied to any federal set-aside programs and is intended to fulfill an operational need within Metra’s infrastructure in Illinois.
Metra

POSTED

5 days ago

DEADLINE

in about 1 month
View Details
NAICS: 337215
New
International
EF944-270517 - Purchase of lockers for ESDC
Solicitation # WS5804788417
The Government of Canada, through Public Works and Government Services Canada, is seeking proposals for the supply of lockers to be delivered to the Department of Employment and Social Development Canada in Montreal, Quebec, under solicitation number WS5804788417. The request, titled EF944-270517, was posted on July 30, 2026, with a firm response deadline of August 19, 2026, at 7:00 PM Eastern Time. All technical and procedural requirements are detailed within the full solicitation document, and offers must fully comply with the specified conditions to be considered. The procurement is open to all eligible suppliers without set-aside restrictions, and performance is exclusively expected in Montreal. Corine Lavoie, Contracting Authority with SPAC/PSPC, serves as the primary point of contact for inquiries and can be reached via email at corine.lavoie@tpsgc-pwgsc.gc.ca. Proposals must be submitted through the CanadaBuys portal, and no bids will be accepted after the stated deadline. The lockers are required for federal government use, and suppliers are expected to meet all delivery, quality, and compliance standards outlined in the solicitation. Failure to adhere to any requirement may result in disqualification.
Department of Public Works and Government Services

POSTED

5 days ago

DEADLINE

in 15 days
View Details
NAICS: 337215
New
DIBBS
Projection Screen SupplyThe contract seeks the supply of one projection screen identified by NSN 6730-01-671-2649, requiring full compliance with Department of Defense technical and quality standards. The item must be delivered with appropriate packaging and, if applicable, include Safety Data Sheet documentation to ensure regulatory adherence and safe handling. This action is structured as a subcontract under NAICS code 337215, indicating it pertains to other commercial and institutional furniture manufacturing. The solicitation was posted on July 28, 2026, with responses due by August 10, 2026, and is managed by the Department of Defense under the Construction & Equipment T & IFO EQ office. There is no set-aside designation specified, and the place of performance and point of contact details are not provided. All bids must be submitted through the designated DIBBS portal, with no alternative submission methods indicated.
CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

7 days ago

DEADLINE

in 6 days
View Details

More opportunities from Department Of Defense → DLA Troop Support

Same awarding agency

NAICS: 424210
Federal
Final Packaging and PreservationThis contract requires the final packaging and preservation of finished coats in strict accordance with military standards to ensure complete protection during transport and storage. The work demands the use of preservation methods that safeguard both the material integrity of the coats and the legibility of all labels, ensuring long-term readiness and usability. All packaging must meet stringent defense specifications to prevent degradation, contamination, or damage under varying environmental conditions encountered during logistical operations. The opportunity is a subcontract under a Small Business Set Aside designation, fully reserved for small businesses as defined by the SBA. It is classified under NAICS code 424210, indicating a focus on apparel and accessory merchant wholesalers. The contract was posted on July 28, 2026, with a response deadline of August 12, 2026, at 7:00 PM. Performance is expected to occur at a location identified by the ZIP code 57551, under the oversight of DLA Troop Support, a division of the Department of Defense. Participation requires full compliance with military packaging protocols and a commitment to maintaining the highest standards of quality and accountability.
Drugs and Druggists' Sundries Merchant Wholesalers

POSTED

7 days ago

DEADLINE

in 8 days
View Details
NAICS: 323113
Federal
Military-Compliant Labeling and BarcodingThis contract requires the production and application of permanent labels and barcode tags that meet MIL-DTL-32075 military specifications for identifying individual garments used by the U.S. military. Each label must include encoded NSN and UPC data to ensure accurate tracking and inventory management across the defense logistics system. The work must be performed in compliance with all federal standards for durability, legibility, and field performance under extreme environmental conditions. Only small businesses are eligible to compete, as this is a Total Small Business Set Aside under NAICS code 323113, which covers printing and related support activities. The opportunity was posted on July 28, 2026, with proposals due by August 12, 2026, and performance is expected to be executed at the designated location associated with the 57551 zip code. The contracting activity falls under DLA Troop Support, a division of the Department of Defense responsible for sustaining military personnel with essential supplies and equipment.
Commercial Screen Printing

POSTED

7 days ago

DEADLINE

in 8 days
View Details
NAICS: 313310
Federal
U.S.-Sourced Fabric Supply (Taffeta, Batting, Binding)The contract seeks the supply of domestically produced taffeta, batting, and binding materials that meet stringent military specifications under MIL-DTL-32768A and comply with the Berry Amendment, ensuring all materials are fully manufactured in the United States for use in military uniform production. The requirements emphasize strict adherence to quality and origin standards, with no sourcing allowed from foreign suppliers or components. This subcontract is designated as a Small Business Set Aside under the SBA, reserving full participation for qualifying small businesses as defined by the North American Industry Classification System code 313310, which covers textile mills involved in fabric manufacturing. The solicitation was posted on July 28, 2026, with a response deadline of August 12, 2026, at 7:00 PM Eastern Time. The contracting activity falls under DLA Troop Support, a division of the Department of Defense, and the performance location is identified with a ZIP code of 57551. All materials must be sourced, processed, and assembled entirely within the U.S. to satisfy federal procurement regulations, and bidders must demonstrate full compliance with domestic sourcing mandates. No foreign content is permitted, and successful vendors will supply critical textile components for standardized military apparel under a firm commitment to national security and industrial base integrity.
Textile and Fabric Finishing Mills

POSTED

7 days ago

DEADLINE

in 8 days
View Details
NAICS: 315999
Federal
Insulated Liner Production (Channel-Quilted)The contract is for the manufacture of a removable insulated liner constructed with taffeta and batting layers featuring channel quilting, designed to meet specific military thermal and dimensional performance standards. The work must adhere to rigorous defense requirements to ensure consistent insulation properties, durability, and fit under operational conditions. The solicitation is a subcontract opportunity under a Small Business Set Aside, exclusively available to small businesses, with the NAICS code 315999 indicating classification under other textile product mills. Performance of the work is designated for the location identified by the zip code 57551. The contract was posted on July 28, 2026, with a firm response deadline of August 12, 2026, at 7:00 p.m. Eastern Time. The awarding agency is the Department of Defense through DLA Troop Support, which manages logistics and supply for U.S. military forces. The opportunity is accessible through the SAM.gov platform, and bidders must submit proposals within the specified timeframe to be considered. No point of contact information is provided in the public data, and the place of performance does not specify a city or state beyond the zip code. Contractors must ensure compliance with all military specifications and be prepared to demonstrate capacity for precision fabrication and quality control appropriate to defense applications.
Other Apparel Accessories and Other Apparel Manufacturing

POSTED

7 days ago

DEADLINE

in 8 days
View Details
NAICS: 315191
Federal
Full-Assembly Military Coat ManufacturingThe contract requires full manufacturing of an all-weather men's military coat adhering strictly to MIL-DTL-32768A with Amendment 1 specifications, encompassing every stage of production from cutting and sewing to quilting and final inspection. A critical component is the integration of a removable insulated liner and the use of safety stitching to ensure durability and compliance with military standards under extreme conditions. The work must be performed by a small business as this is a Total Small Business Set Aside under NAICS code 315191, designated for apparel manufacturing. The solicitation was posted on July 28, 2026, with a firm response deadline of August 12, 2026, at 7:00 PM, and the performance location is designated as ZIP code 57551. The contract is issued under DLA Troop Support, a division of the Department of Defense, and is structured as a subcontract opportunity.
Outerwear Knitting Mills

POSTED

7 days ago

DEADLINE

in 8 days
View Details
Federal
Tactical Body Armor
Solicitation # SPE1C1-26-R-CommArmor
The U.S. Department of Defense, through DLA Troop Support, is seeking market information via a Request for Information to identify qualified vendors capable of supplying Berry Amendment compliant tactical body armor, concealable compression tops, plate carriers, and associated load carriage systems. This RFI is strictly for research purposes and does not constitute a commitment to award a contract. The target solution is a Firm Fixed Price, Indefinite Quantity/Indefinite Delivery (IDIQ) contract with up to five 12-month tiers spanning five years total. All products must be 100% manufactured in the United States and meet or exceed NIJ Standard 0101.06, DEA, and FBI 4.1 testing requirements, with mandatory FBI approval. Sizing must cover Extra Small to Extra-Large, with female-specific designs available where required. The requirements are organized into four categories: Category A includes ultra-low-visibility compression tops designed to hold concealable armor panels, featuring four-way stretch fabric, side zippers for one-person donning, antimicrobial properties, and included spare panels and carrying bags. Category B comprises enhanced tactical plate carriers for overt operations, equipped with quick-connect buckles, MOLLE webbing, integrated pouches for magazines, tourniquets, radios, handcuffs, flashlights, IFAKs, and OC spray, along with padded shoulders, ventilation, and an integrated ballistic framework that reduces back face deformation and side spall. Category C involves modular vest systems designed to integrate with the compression tops, while Category D specifies hard armor plates in multiple sizes, including 6x6 side plates, meeting Level III/IV ballistic standards. Vendors must submit capability statements including Berry Amendment compliance verification, product specifications, estimated lead times, and company details by August 20, 2026, with pricing explicitly excluded from this phase.

POSTED

7 days ago

DEADLINE

in 16 days
View Details
NAICS: 315120
Federal
Army Green Service Uniform All Weather Coat
Solicitation # SPE1C126R0115
The U.S. Department of Defense, through DLA Troop Support, is seeking qualified small businesses to manufacture and deliver the Men’s Army Green Service Uniform (AGSU) All-Weather Coat under Solicitation No. SPE1C1-26-R-0115. This procurement is structured as a total small business set-aside divided into two equal lots, each requiring the production of 16,650 units as a guaranteed minimum over a 60-month period, with an annual estimated quantity of 66,600 per lot and a maximum potential volume of 499,500 units per lot. All items must be entirely manufactured in the United States using 100% domestic materials, in strict compliance with MIL-DTL-32768A Amendment 1 dated March 31, 2026, and the pattern date of May 22, 2026, in accordance with the Berry Amendment and related statutory requirements. Contracts will be indefinite-delivery/indefinite-quantity, firm fixed-price, with five separate 12-month pricing tiers, and all pricing must be quoted on an FOB Destination basis, except for depot stock orders where inspection and acceptance occur at origin. Offerors must submit one Product Demonstration Model (PDM) in size 40R from each proposed place of performance, alongside a detailed history of past performance within the last three years preceding the solicitation closing date. Evaluation will prioritize technical merit over price, with past performance being the most critical factor, followed by PDM conformance to specifications, and then proposed price. The government will use FAR Part 12 for acquisition and will not accept paper solicitations—interested parties must register on SAM.gov and access the full solicitation on DIBBS and SAM.gov. Technical data, including specifications and patterns, must be requested through the DLA Troop Support C&T Technical Data Repository, with mandatory fields completed and notification sent to Contract Specialist Nhi Lieu. All deliveries will be directed to Travis Association for the Blind in Austin, TX, with initial orders requiring three monthly shipments beginning 120 days after contract award. The response deadline is August 12, 2026, and inquiries should be directed to Nhi Lieu at Nhi.Lieu@dla.mil.
Apparel Knitting Mills

POSTED

7 days ago

DEADLINE

in 8 days
View Details
NAICS: 541611
Federal
Subcontract Management and ReportingThe contract requires the prime contractor to maintain detailed documentation of any subcontractors involved in manufacturing or material supply, including the full legal names and CAGE codes of each entity. This obligation ensures traceability and accountability across the supply chain for defense-related activities under the oversight of the Department of Defense through DLA Troop Support. Failure to properly record and report this information could result in noncompliance with contractual obligations and potential penalties. The solicitation, classified under NAICS code 541611, pertains to administrative management and general management consulting services related to subcontract oversight. Although no set-aside type is specified, the contract is open to eligible bidders responding by the deadline of August 7, 2026, at 7:00 PM. Performance location and point of contact details are not provided, but all subcontracts must be reported in accordance with federal acquisition regulations. The contract was posted on July 24, 2026, and the official details can be accessed through the SAM.gov workspace link.
Administrative Management and General Management Consulting Services

POSTED

11 days ago

DEADLINE

in 3 days
View Details
NAICS: 484220
Federal
Logistics and Delivery to Austin, TX (FOB Destination)The contract pertains to the logistics and delivery of finished units from the contractor’s facility to a specified destination at 4512 South Pleasant Valley Road, Austin, TX 78744, under FOB Destination terms, meaning the contractor assumes responsibility for all transportation costs and risks until the goods arrive at the designated location. The work is classified under NAICS code 484220, which corresponds to truck transportation of freight, and is structured as a subcontract within the Department of Defense’s procurement framework managed by DLA Troop Support. The opportunity was posted on July 24, 2026, with a firm deadline for responses set for August 7, 2026, at 7:00 p.m. local time. All delivery operations must be executed in full compliance with the FOB Destination requirement, placing the onus on the contractor to ensure timely, secure, and undamaged transit of the finished units to the specified Texas address.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

11 days ago

DEADLINE

in 3 days
View Details
NAICS: 541330
Federal
Product Demonstration Model (PDM) FabricationThe contract titled Product Demonstration Model (PDM) Fabrication is a subcontract aimed at developing pre-production prototypes or demonstration units for government testing and evaluation before any full-scale procurement decision is made. It is issued under the NAICS code 541330, which corresponds to engineering services, indicating that the work involves technical design, modeling, and fabrication capabilities to produce functional representations of a proposed system or product. The effort is intended to support the Department of Defense through DLA Troop Support, with the goal of gathering critical data and feedback to inform subsequent contracting decisions. Responses are due by August 7, 2026, and the opportunity was posted on July 24, 2026, providing potential offerors approximately three weeks to prepare and submit proposals. While no specific place of performance or point of contact is listed, the nature of the contract implies that deliverables will be tailored to meet detailed government evaluation criteria, likely involving rigorous technical validation and performance benchmarks.
Engineering Services

POSTED

11 days ago

DEADLINE

in 3 days
View Details
NAICS: 325991
Federal
Specialized Material Supply for Chemical-Resistant BagsThe contract calls for the supply of fluoropolymer-coated or chemically inert laminated films specifically engineered for use in stowage bags designed to meet exacting military standards for durability and chemical containment. These materials must withstand extreme environmental conditions and resist degradation from hazardous substances, ensuring the safe storage and transport of sensitive military equipment and materials. The films are critical components in the construction of containers that must maintain integrity under rigorous field use, including exposure to solvents, fuels, acids, and other aggressive chemicals. The procurement is structured as a subcontract under the NAICS code 325991, indicating classification within other chemical product and preparation manufacturing. It is being managed by DLA Troop Support, a branch of the Department of Defense, with responses required by August 7, 2026. The contract does not specify a set-aside status, meaning it is open to all eligible suppliers. Performance location details are not provided, but the materials must fulfill federal specifications for military-grade containment systems. Interested parties must ensure their products meet all technical and quality control requirements for battlefield and logistical environments.
Custom Compounding of Purchased Resins

POSTED

11 days ago

DEADLINE

in 3 days
View Details
NAICS: 326111
Federal
Manufacturing of Chemical Stowage BagsThe contract calls for full-scale production of chemical-resistant stowage bags compliant with military specification NU/PD 20002A, covering every phase from material sourcing and fabrication to rigorous quality control and final packaging. All components must meet exacting military standards for durability, chemical resistance, and operational reliability in demanding environments, with the contractor responsible for ensuring consistency and compliance throughout the manufacturing process. The solicitation is issued as a subcontract under the Department of Defense, specifically managed by DLA Troop Support, with a NAICS code of 326111 indicating the industrial classification for rubber and plastic product manufacturing. The opportunity was posted on July 24, 2026, and responses are due by August 7, 2026, at 7:00 PM, leaving a narrow window for qualified suppliers to submit proposals. The place of performance and point of contact details are not specified, suggesting the deliverables may be distributed to multiple locations under DLA’s logistics network, and interested parties should reference the official SAM.gov link for submission and additional procedural guidance.
Plastics Bag and Pouch Manufacturing

POSTED

11 days ago

DEADLINE

in 3 days
View Details