Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Forged Aluminum Alloy 7075 Bar Supplier

Active

Federal

Response Deadline10/26/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the supply of one forged flat aluminum alloy 7075 bar for prime contractors working on Defense Logistics Agency Troop Support procurement projects. The required bar must measure 7.000 inches by 10.00 inches by 32.00 inches and undergo T6 solution heat treatment. Compliance with the Buy American Act and Berry Amendment restrictions is mandatory, and the supplier must provide Mill-Material Certification and maintain a QSLD listing. The project requires adherence to ASTM D3951 for packaging and MIL-STD-129 for marking. Performance will take place in East Granby, Connecticut, under NAICS code 332410. The final delivery must include both the forged bar and the necessary quality certifications.

General Info

Supply one T6 aluminum 7075 bar for DLA projects in East Granby, Connecticut.

Agency

Department Of Defense → Defense Logistics Agency

NAICS

332410 - Power Boiler and Heat Exchanger Manufacturing

Place of Performance

EAST GRANBY, CT, 06026-9309, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE8E4-27-T-0099.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

BAR, METAL

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 15

subcontract

Response DeadlineOct 26

Submission deadline

Response Deadline

10/26/2026, 05:00:00 PM UTCin 10 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → Defense Logistics Agency

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies one forged flat aluminum alloy 7075 bar for prime contractors on DLA Troop Support procurement projects. Manufactures or sources a bar measuring 7.000" x 10.00" x 32.00" with T6 solution heat treatment. Adheres to Buy American Act and Berry Amendment restrictions. Packages per ASTM D3951 and marks per MIL-STD-129. Requires QSLD listing and Mill-Material Certification. Delivers the forged bar and quality certification.

Similar Contracts

Same NAICS industry code

Forging and Fabrication of Pedestal Antenna BeamsThis subcontract, issued by the Department of Defense under the DLA Weapons Support ASC, involves the forging and fabrication of 30 Pedestal Antenna Beams for prime contractors. The scope of work includes the design and manufacture of necessary forging tooling, the execution of forging processes, and the implementation of quality control measures in accordance with MIL-STD-1916 or ASQ H1331. To be eligible, contractors must hold SAE AS9003 or ISO 9001 certification and maintain CMMC Level 2 compliance. This opportunity is designated as a Total Small Business Set-Aside under NAICS code 332410, with a response deadline of October 23, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Military-Spec Wooden Crating and PackagingThis subcontract for Military-Spec Wooden Crating and Packaging involves providing specialized packaging services for prime contractors working on DLA Troop Support Construction and Equipment projects. The scope of work requires the construction of individual wooden boxes for 75 armor panels, including the installation of cushioning to prevent movement during transport. All deliverables must be palletized and delivered as 75 individually crated units. The project mandates strict adherence to military standards, specifically requiring marking per MIL-STD-129, packaging per MIL-STD-2073-1E, and palletization per RP001. This effort is managed by the Department of Defense through the DDSP New Cumberland Facility, with performance taking place in New Cumberland, Pennsylvania. The solicitation was posted on October 15, 2026, with a response deadline of October 26, 2026, under NAICS code 332410.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

CORE ASSEMBLY, FLUID COOLER

Solicitation # SPE8E8-26-R-0009

Solicitation SPE8E8-26-R-0009 is a request for proposals issued by the Defense Logistics Agency for a firm fixed price, definite quantity contract to procure Fluid Core Assemblies, NSN 4420-01-281-2470. The requirement is for an initial quantity of 65 units with an additional 20 percent quantity option for 13 units. Proposals are due by November 14, 2026, and will be evaluated based on price only, provided the offeror is determined to be responsible and the proposal conforms to all solicitation terms. Delivery is required within 355 days after order, with inspection and acceptance occurring at the destination via DLA Direct Delivery. The contract mandates strict adherence to technical and quality requirements, including Source Approval Request documentation and DLA Master List standards. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, with specific requirements for preservation, cushioning, and center of balance marking. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with various FAR and DFARS clauses regarding specialty metals, cybersecurity, and the Buy American program. Offerors must certify that all materials are new and unused and submit their proposals via email or the DIBBS portal.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

High Purity Iron (Fe) Supply

NASA Shared Services Center

POSTED

DEADLINE

High Purity Cobalt (Co) Supply

NASA Shared Services Center

POSTED

DEADLINE

High Purity Tantalum (Ta) Supply

NASA Shared Services Center

POSTED

DEADLINE

High Purity Niobium (Nb) Supply

NASA Shared Services Center

POSTED

DEADLINE

Heavy Metal Forging & Heat TreatmentThis subcontract, titled Heavy Metal Forging and Heat Treatment, involves the high-volume production of large-caliber metal parts for prime contractors supporting Army Contracting Command-Rock Island projects under the Department of Defense. The scope of work focuses on the delivery of finished 155mm artillery projectile metal components, utilizing specialized industrial processes including long stroke, high tonnage forging, large volume heat treating, and precision machining. The project is categorized under NAICS code 332410 and requires the use of high-tonnage forging presses and industrial heat-treat furnaces to meet production specifications. Interested parties should note the tight response window, with the opportunity posted on October 15, 2026, and a response deadline of October 17, 2026.

POSTED

DEADLINE

in about 2 hours

Aft Axle Housing Forging (Rough Shape)This subcontract involves the initial forging of Aft Axle Housings for prime contractors supporting DLA Weapons Support ASC projects. The scope of work requires the use of industrial forging presses and hammers to transform aerospace-grade alloy billets into rough geometry blanks for Boeing part numbers 114L2334-1 and 114L2334-3. Performance of the contract will take place in New Cumberland. To be eligible, contractors must maintain SAE AS9003 or ISO 9001 certification and ensure full compliance with CMMC Level 2 and NIST SP 800-171 standards. The opportunity was posted on October 14, 2026, with a response deadline of October 22, 2026, under NAICS code 332410.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Heat Exchanger Supply (NSN 4420-01-141-5989)This subcontract, issued by the Department of Defense via DLA DIST San Joaquin, requires the supply of three heat exchangers identified by part number 11149 and NSN 4420-01-141-5989. The selected provider must either manufacture or source these units and include a comprehensive commercial manual for each item covering operation, maintenance, and parts lists. All deliverables must adhere to strict packaging and marking standards, specifically ASTM D3951, RP001, and MIL-STD-129. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 332410, with performance taking place in Tracy, California. Interested parties must submit their responses by October 26, 2026.

DLA DIST SAN JOAQUIN

POSTED

DEADLINE

Inboard Pylon Housing Forging and Initial ShapingThis subcontract involves the forging and initial shaping of four Inboard Pylon Housing blanks for prime contractors supporting DLA Weapons Support ASC projects. The contractor is responsible for creating near-net shapes using custom forging tooling in strict accordance with Boeing part number 68A731081-2033. Quality assurance must be maintained through sampling methods compliant with MIL-STD-1916 or ASQ H3311. To be eligible, the provider must hold ISO 9001:2015, SAE AS9003, and CMMC Level 2 certifications. The work is categorized under NAICS code 332410 and will be performed at Robins Air Force Base. The solicitation was posted on October 14, 2026, with a response deadline of October 22, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

QPL Electrical Wire Supplier (NSN 6145-01-335-4701)This subcontract involves the supply of 500 feet of high-specification electrical wire for prime contractors supporting the DLA Weapons Support Maritime Supply Chain. The supplier is required to manufacture or source the wire from a Qualified Products List approved manufacturer, ensuring strict adherence to SAE AS22759/31 Revision B and SAE AS22759E Revision E standards. Additionally, the contractor must comply with the Buy American Act and the Berry Amendment. Logistical requirements include packaging according to MIL-DTL-12000 and MIL-STD-2073-1E, with marking performed per MIL-STD-129. The project falls under NAICS code 332410 and is managed by the Department of Defense. Interested parties must submit responses by October 26, 2026, for performance in New Cumberland.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

Aerospace Surface Finishing and MarkingThis subcontract for Aerospace Surface Finishing and Marking supports DLA Troop Support aircraft trainer pod projects. The selected contractor will be responsible for applying protective finishes and identification markings to Hanger Assemblies, ensuring all work is performed in strict accordance with MIL-STD-129. Managed by the Defense Logistics Agency under the Department of Defense, this requirement falls under NAICS code 332813. Due to the nature of the aerospace components, the contractor must maintain full ITAR and EAR compliance. The solicitation was posted on October 16, 2026, with a response deadline of October 22, 2026.

Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

about 10 hours ago

DEADLINE

Aerospace NDT and Heat TreatmentThis subcontract for the Defense Logistics Agency involves providing specialized material validation, heat treatment, and non-destructive testing services for aircraft trainer pod projects. The scope of work focuses on ensuring structural integrity through critical processes including X-ray and penetrant inspections, with a requirement for the delivery of certified test reports and detailed heat-treatment logs. Qualified providers must maintain aerospace testing certifications and strictly adhere to ITAR and EAR compliance standards. The project falls under NAICS code 541380 and is managed through the Department of Defense to support prime contractors in meeting rigorous aerospace safety and quality specifications.

Testing Laboratories and Services

POSTED

about 10 hours ago

DEADLINE

Precision Aerospace CNC MachiningThe Precision Aerospace CNC Machining subcontract involves the final machining and assembly of hanger assemblies for aircraft trainer pod projects under the Defense Logistics Agency. The selected provider will be responsible for machining components from blanks to final dimensions according to TDP Rev A Gen 1 specifications and must conduct 100% dimensional inspection for First Article Testing to ensure all deliverables meet strict quality standards. Compliance is a critical requirement for this engagement, as the contractor must maintain CMMC Level 2 certification and adhere to ITAR and EAR regulations. This project falls under NAICS code 336413 and requires the delivery of completed Hanger Assemblies to support prime contractors on Department of Defense initiatives.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 10 hours ago

DEADLINE

Aerospace Casting and ForgingThis subcontract involves the casting and forging of aerospace-grade materials for hanger assembly components used in DLA Troop Support aircraft trainer pod projects. The selected provider must deliver rough-cast or forged blanks that strictly adhere to TDP Rev A Gen 1 specifications and maintain mercury-free compliance in accordance with NAVSEA 5100-003D. The project is managed under the Defense Logistics Agency and requires strict adherence to regulatory standards, including ITAR/EAR compliance and the US/Canada Joint Certification Program. Interested parties must respond by October 22, 2026, for this specialized manufacturing effort categorized under NAICS code 336413.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 10 hours ago

DEADLINE

Supply of Deep Cycle Marine Storage BatteriesThis subcontract involves the procurement of deep cycle marine storage batteries to support prime contractors under Defense Logistics Agency supply contracts. The scope of work requires the sourcing and provision of four Concorde Battery Corporation part number GPL-4CT 6-volt batteries, which must be fully sealed, non-spillable, submersible, and maintenance-free. All units are required to have a minimum shelf life of 18 months and must be delivered to NAS North Island Supply in San Diego, California. Compliance is mandatory regarding HAZMAT shipping regulations and strict adherence to MIL-STD-2073-1E and MIL-STD-129 standards. The opportunity is categorized under NAICS code 325181 and is managed through the Department of Defense. Interested parties must note the response deadline of October 27, 2026.

Alkalies and Chlorine Manufacturing

POSTED

about 10 hours ago

DEADLINE

MIL-SPEC Packaging and MarkingThis subcontract involves providing specialized military packaging, marking, and shipment preparation for prime contractors working on Defense Logistics Agency supply contracts. The scope of work focuses on the processing of vests, ensuring they are packaged, marked, and palletized for destination delivery using industrial marking equipment and military-grade wraps and containers. All operations must strictly adhere to MIL-STD-2073-1E and RP001 for packaging and MIL-STD-129 for marking requirements. This effort falls under NAICS code 488410 and is managed through the Department of Defense.

Motor Vehicle Towing

POSTED

about 10 hours ago

DEADLINE

Specialized Nylon Cord SupplyThis subcontract for Specialized Nylon Cord Supply involves providing high-tensile strength nylon cords to prime contractors supporting the Defense Logistics Agency. The required materials must meet or exceed a minimum tensile strength of 90 pounds, with all bulk cordage delivered alongside official test certifications. To ensure quality and compliance, the supplier is responsible for performing testing and certification of tensile strength in accordance with ASTM D4268 standards. This opportunity falls under NAICS code 313210 and is managed through the Department of Defense.

Broadwoven Fabric Mills

POSTED

about 10 hours ago

DEADLINE

Life Preserver Vest Fabrication and AssemblyThis subcontract involves the manufacture and assembly of 561,330 abandon ship life preserver vests for prime contractors under Defense Logistics Agency supply contracts. The contractor is responsible for fabricating the vests according to CID A-A-59767A, which includes the integration of outer shells and buoyancy materials. All components must be certified as asbestos-free in compliance with FFD-STD-313, and the production process requires specialized industrial sewing equipment capable of handling marine-grade textiles. The project falls under NAICS code 314999 and mandates strict adherence to DFARS Part 225 regulations. The specific item being produced is identified by NSN 4220-01-487-2932. Interested parties must note the response deadline of October 22, 2026, for this Department of Defense requirement.

All Other Miscellaneous Textile Product Mills

POSTED

about 10 hours ago

DEADLINE

Supply of Annealed, Cold-Drawn Flat Steel Bar (COMP 8630)This subcontract through the Defense Logistics Agency requires the supply of annealed, cold-drawn flat steel bar with a thickness of 0.250 inches. The material must strictly adhere to COMP 8630, MIL-S-6050A, and SAE AMS2806 specifications. To be eligible, providers must maintain a QSDL listing for FSGs 95 and 96 and possess the capability to handle invoicing via the Wide Area Workflow system. Deliveries of the specified steel bar lengths, accompanied by Mill-Material Certification, are to be made to the Sagami Storage Facility in Japan. All shipments must comply with MIL-STD-129 and ASTM A700 packaging standards. The opportunity is categorized under NAICS code 331221, with a response deadline set for October 19, 2026.

Rolled Steel Shape Manufacturing

POSTED

about 10 hours ago

DEADLINE

Lead Acid Storage Battery Supplier (NSN 6140-01-457-6156)This subcontract through the Defense Logistics Agency involves the supply of 1,001 lead acid, wet, non-spillable storage batteries to support prime contractors for the USS Texas and USS Essex. The required equipment must be Schneider Electric part number RBC11, adhering strictly to NSN 6140-01-457-6156 specifications. The contract mandates a Type I shelf life of three months and requires sampling and packaging to be conducted in accordance with MIL-STD-1916, ASQ H1331, MIL-STD-2073-1E, and MIL-STD-129. This procurement falls under NAICS code 335910, with a response deadline set for October 27, 2026.

Battery Manufacturing

POSTED

about 10 hours ago

DEADLINE

HAZMAT Packaging and Shipping ServicesThis subcontract for HAZMAT Packaging and Shipping Services involves providing specialized packaging, marking, and transportation for hazardous material shipments supporting prime contractors on Defense Logistics Agency supply contracts. The scope of work specifically requires the delivery of packaged batteries accompanied by completed hazardous materials declarations. All operations must be performed by HAZMAT certified personnel in strict accordance with DOT compliance and military standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Additionally, the contractor must ensure full adherence to FED STD 313D and DFARS 252.223-7001 regulations.

Motor Vehicle Towing

POSTED

about 10 hours ago

DEADLINE

Deep Cycle Marine Battery SupplierThis subcontract opportunity with the Defense Logistics Agency requires the supply of one Concorde Battery Corporation part number GPL-4CT Type I deep cycle marine battery. The battery must be fully sealed, non-spillable, submersible, and maintenance-free, featuring a non-extendable shelf life of at least 18 months. To ensure quality and compliance, the supplier must provide a Certificate of Conformance verifying all technical specifications. Prospective bidders must complete a CMMC Level 2 self-assessment to be eligible for the award. The solicitation was posted on October 16, 2026, with a response deadline of October 27, 2026. This requirement falls under NAICS code 325181 and is intended for prime contractors supporting DLA supply contracts.

Alkalies and Chlorine Manufacturing

POSTED

about 10 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS