This Government Contract opportunity from Government of Canada was posted on June 12, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Forklift Truck Supply and Delivery

Closed

International

Submission Closed06/29/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 333120

New

Federal

Battery-Operated Forklift Supply and Equipment ManufacturingThe contract is for the supply of a single 2-ton battery-operated forklift that must meet ISO and ANSI safety and performance standards, featuring critical safety components including a ROPS, overhead guard, and reverse alarm, with a minimum lift height capacity of 4.5 meters. The forklift is intended for use at the designated place of performance in Cape Town, South Africa, with the delivery and installation expected to comply with all technical and regulatory requirements outlined in the solicitation. The equipment must be manufactured or sourced under the NAICS code 333120, which pertains to industrial machinery manufacturing, and the contract is structured as a subcontract under the Department of State, via the American Consulate Cape Town. The opportunity was posted on July 28, 2026, with a response deadline of August 11, 2026, at 1:00 PM local time, leaving approximately two weeks for potential vendors to submit proposals. There is no specified set-aside status, meaning the contract is open to all qualified entities regardless of size or ownership classification. The contract does not include detailed point of contact information, and all submissions must be made through the official SAM.gov portal linked in the posting. Buyers are expected to adhere strictly to the required specifications, delivery timelines, and compliance standards to be considered for award.

American Consulate Cape Town

POSTED

DEADLINE

Forestry Track Loader

POSTED

DEADLINE

364 TRS Telecom Flight TrencherThe U.S. Air Force’s 82d Contracting Squadron at Sheppard Air Force Base, Texas, is soliciting quotes under solicitation number FA302026Q0074 for a Telecom Flight Trencher through a combined synopsis and solicitation formatted in accordance with FAR Part 12, with no separate written solicitation to be issued. This is a total small business set-aside under NAICS code 333120, with a size standard of 1,250 employees, and the government intends to award a single Firm Fixed Price contract. All offers must be submitted via email to the designated primary and alternate points of contact by 2:00 PM CDT on July 31, 2026, and any questions must be received in writing no later than 2:00 PM CDT on July 30, 2026. Contractors are advised to monitor the solicitation notice regularly for amendments, as this is the only source for updates, and the government reserves the right to cancel the solicitation at any time without obligation to reimburse offerors for incurred costs. The place of performance is Sheppard AFB, Texas, and all documentation is accessible through the provided SAM.gov link.

POSTED

DEADLINE

3805-- CAT 926 & 930 WHEEL LOADERThis solicitation seeks quotations for the purchase of one Caterpillar 930 Wheel Loader and two Caterpillar 926 Wheel Loaders for the Togus VA Medical Center in Augusta, Maine, under a brand-name-only requirement exclusively for products manufactured by Caterpillar, Inc. The procurement is conducted under the Revolutionary FAR Overhaul framework using simplified commercial acquisition procedures, with no written solicitation document issued beyond this notice. The North American Industry Classification System code is 333120 with a size standard of 1,250 employees, and the procurement is open to full and open competition without set-asides. All quotations must be submitted electronically to the Contract Specialist by August 5, 2026, at 10:00 AM EST, and must include the required offeror information, Unique Entity Identifier, Electronic Funds Transfer indicator, compliance statement regarding solicitation terms, and specific pricing details for the three referenced product sheets. Delivery must be completed no later than 270 days after order receipt at the specified VA facility address. Quotes will be evaluated based on three factors: price, speed of delivery, and past performance, with award anticipated without discussions unless necessary. Offerors must hold pricing firm for 60 days from the due date and acknowledge acceptance of all solicitation terms or clearly list any exceptions with justification. Participation requires current registration and representations in the System for Award Management, and compliance with the tailored FAR 52.212-1 Instructions to Offerors Commercial Products and Commercial Services (Deviation August 2025) and FAR 52.212-4 Contract Terms and Conditions. Late submissions will not be considered unless accepted under specific emergency provisions or if they benefit the government, and post-award debriefings will include evaluation details, pricing, rankings, and rationale for award. All inquiries must be directed in writing to the Contract Specialist at the provided email or phone number.

241-NETWORK Contract Office 01 (36C241)

POSTED

DEADLINE

3805--Skid Steer Loader

245-NETWORK Contract Office 5 (36C245)

POSTED

DEADLINE

High-Flow Tracked Skid Steer Loader with 72-Inch Forestry Mulching Head AttachmentThe Department of Commerce, National Institute of Standards and Technology, located in Gaithersburg, Maryland, has issued a solicitation for a High-Flow Tracked Skid Steer Loader equipped with a 72-inch Forestry Mulching Head Attachment, under solicitation number 1333ND26QNB190303. The requirement seeks specialized heavy equipment designed for efficient vegetation management, with specifications detailed in an attached item document, and is classified under NAICS code 333120 for construction machinery manufacturing. The solicitation was posted on July 23, 2026, with a firm response deadline of July 31, 2026, at 5:00 PM Eastern Time, and all proposals must be submitted through the designated SAM.gov portal. The equipment must meet high-flow hydraulic standards to properly operate the mulching head and be suitable for performance entirely within Gaithersburg, Maryland. Primary point of contact for inquiries and submissions is Brandon Butler, reachable at brandon.butler@nist.gov, and no set-aside provisions are specified for this procurement, meaning it is open to all qualified vendors. The agency requires full compliance with technical specifications outlined in the attached documentation, and bidders are expected to provide detailed information on equipment capabilities, compliance certifications, delivery timelines, and warranty terms. Delivery and installation must align with the operational needs of the facility, and responses failing to meet all mandatory requirements may be deemed nonresponsive. Bidders are advised to review the solicitation document thoroughly before submitting quotes to ensure alignment with NIST’s operational and safety standards for forestry and land management equipment.

Department Of Commerce Nist

POSTED

DEADLINE

91-- BRUSH CHIPPER WITH WINCHThe contract seeks the procurement of a single brush woodchipper with an integrated hydraulic winch from a small business under a total small business set-aside, as identified by NAICS code 333120 and FAR 19.5. The equipment must be a new 2026 model, fully assembled, and ready for immediate operational use at the delivery site in Mill Valley, California, with specifications including a minimum 15” x 20” infeed throat, dual vertical feed rollers, a 270° rotatable discharge chute, an EPA Tier 4 diesel engine of at least 130 horsepower, a 12V DC electrical system with 900 CCA, a maximum weight of 8,100 pounds, a single axle with electric brakes and a 7-way trailer connector, and DOT-approved tires with a minimum tread depth of 10/32 inch. The unit must be delivered FOB destination, with the contractor responsible for all transportation, crating, packaging, and handling costs, and must include complete operator and maintenance manuals along with the manufacturer’s warranty. The award will follow a lowest price technically acceptable (LPTA) methodology, where only the lowest-priced offerors are evaluated for technical acceptability based on strict compliance with Section 2 requirements. Technical evaluation is a pass/fail assessment with no trade-offs permitted between cost and technical factors. The contract is administered through the U.S. Department of the Interior, National Park Service ConOps Strategic Division, with Michelle Potter serving as the primary point of contact. Invoicing must be processed exclusively through the Invoice Processing Platform (IPP), with no other payment methods accepted. The contracting officer’s representative will be designated after award, and all communications must be copied to this individual once appointed. Special contractual requirements include authorized deviations from standard FAR clauses related to security prohibitions, equal opportunity for workers with disabilities, combating trafficking in persons, and prohibitions against DEI discrimination in employment, as well as clauses ensuring whistleblower protections and prohibiting internal confidentiality agreements that restrict communication with the government. The contractor must maintain active SAM registration, submit a signed SF 1449 form, and explicitly note any exceptions or assumptions in their quotation, as failure to do so constitutes full acceptance of all terms. Deliveries are due no later than 60 days after award, and acceptance will occur on-site at the Old Inn in Mill Valley, where the government will inspect for conformance to all technical specifications, including

Nps Conops Strategic DOI

POSTED

DEADLINE

Skid Steer LoaderThe Department of Veterans Affairs, through Network Contracting Office 23, is soliciting a single new JCB 3TS-8W Skid Steer Loader under a total small business set-aside, with the contract to be delivered to the Fort Meade Medical Center within the Black Hills VA Health Care System in South Dakota. The solicitation, identified by number 36C26326Q0888, is structured as a Brand Name or Equal procurement and follows a Lowest Price Technically Acceptable (LPTA) evaluation process, where technical acceptability is assessed first using pass/fail criteria based on compliance with specifications, Buy American Act requirements, warranty terms, and equipment performance, and award is made exclusively to the lowest-priced technically acceptable offeror. The procurement is subject to multiple FAR clauses including deviations for commercial item terms, Buy American, data privacy and security for cloud services, and DEI discrimination prohibitions, with all offerors required to comply with the Buy American Act and submit a certified statement affirming compliance. The equipment must be new, capable of operation in extreme weather, and delivered FOB destination to the site in Fort Meade, South Dakota, with the contractor responsible for offloading, setup, operational testing, and hands-on training for four VA staff members alongside full warranty documentation. Proposals must be submitted electronically by email to Theresa Thunder by July 30, 2026, at 5:00 p.m. CDT, and must be organized into two clearly labeled volumes: Volume I containing the completed pricing documentation, Standard Form 1449 with UEI and CAGE codes, and required representations, and Volume II containing a concise capability narrative demonstrating technical capability. Submissions must be in .doc, .docx, .xls, .xlsx, or .pdf formats, with no links to external storage allowed. Only electronic submissions are accepted; faxed or mail submissions will be disqualified. Contract administration is managed by the Network Contracting Office 23 in Fargo, North Dakota, with payments processed via Electronic Funds Transfer using the Tungsten Network portal exclusively. The base performance period runs from August 1, 2026, to November 30, 2026. All offerors must hold a valid UEI, certify as a small business, and disclose any involvement with Iran, Sudan, or use of covered telecommunications equipment within 72 hours of submission, with failure to comply resulting in disqualification. Amendments

Network Contract Office 23 (36C263)

POSTED

DEADLINE

Class D Duty Cycle CraneThe U.S. Army Corps of Engineers, Memphis District, is soliciting quotes for a single Class D rated duty cycle crawler crane under solicitation number W912EQ26QA042, which is open to full and open competition with no set-aside restrictions. The procurement is governed by the North American Industry Classification System (NAICS) code 333120, and all vendors must be registered in the System for Award Management (SAM) database prior to award, during performance, and through final payment; this registration must include the correct NAICS code. Quotes must be submitted via email by the deadline of August 28, 2026, at 4:00 p.m., and must clearly reference the solicitation number. Responses should be addressed to Alexandria Duckett or Kirk A. Middleton at their respective email addresses or phone numbers, with the vendor solely responsible for ensuring timely receipt. Failure to comply with SAM registration or submission requirements will disqualify an offeror from award consideration. The place of performance and specific delivery details are not specified in the provided data, and the point of contact for inquiries is Kirk Middleton.

POSTED

DEADLINE

6-Ton Class Compact Excavator SupplyThe contract calls for the supply of a new 6-ton class compact excavator equipped with a Tier 4 diesel engine, hydraulic quick coupler, high-flow hydraulics, and a standard bucket, all configured and ready for immediate operation. The equipment must meet specified performance and compliance standards to ensure durability, efficiency, and environmental suitability under operational conditions. This is a subcontract procurement issued by the Mississippi Department of Finance and Administration under the NAICS code 333120, indicating classification within construction machinery manufacturing. The solicitation was posted on July 24, 2026, with a response deadline of August 14, 2026, giving potential suppliers approximately three weeks to submit proposals. The place of performance and point of contact details are not specified in the available data, and there is no set-aside designation indicated for small businesses or other categories. Interested parties must review the official bid details through the provided link to Mississippi’s contract bid search portal to access full submission requirements, evaluation criteria, and technical specifications necessary for compliance and competitive bidding.

POSTED

DEADLINE

5-Ton Class Compact Excavator SupplyThe contract mandates the supply of a new 5-ton class compact excavator equipped with a Tier 4 diesel engine, a hydraulic quick coupler, high-flow hydraulics, and a standard bucket, all configured and ready for immediate operational use. The equipment must meet all technical specifications to ensure compatibility, performance, and compliance with environmental and operational standards. The solicitation is issued as a subcontract under NAICS code 333120, associated with the Mississippi Department of Finance and Administration (MPTAP), and is open for responses until August 14, 2026, with the request publicly posted on July 24, 2026. No set-aside designation is specified, and the place of performance details are not provided, leaving the ultimate delivery location to be determined by the awarding entity. The contract is part of a state-level procurement process, with all inquiries and submissions managed through the official Mississippi government contract portal.

POSTED

DEADLINE

Supply of 4-Wheel Drive Diesel Scissor LiftThe contract calls for the procurement and delivery of a new 4-wheel drive diesel-powered scissor lift designed to meet OSHA and ANSI safety standards for operation at the Greenville Port Terminal. The equipment must be capable of handling the demanding environment of a port facility, ensuring reliability, durability, and compliance with all relevant industrial safety regulations. The item is classified under NAICS code 333120, indicating it falls within the industrial machinery manufacturing sector, and the procurement is structured as a subcontract under the MPTAP agency, which is affiliated with the state of Mississippi. The solicitation was posted on July 24, 2026, with responses due by August 19, 2026, providing potential vendors a 27-day window to submit proposals. While specific details such as point of contact, delivery address, and set-aside conditions are not provided, the place of performance is explicitly tied to the Greenville Port Terminal, emphasizing the critical operational context. The contract is accessible via a public link hosted on the Mississippi state website, ensuring transparency in the bidding process and enabling qualified suppliers to review requirements and prepare submissions accordingly.

MPTAP

POSTED

5 days ago

DEADLINE

in 21 days

AI Contract Overview

The contract involves the supply and delivery of a new Reach & Tiering Stand Up Rider Electric Motor Driven Forklift Truck to be delivered in Ottawa, Ontario, Canada, by August 31, 2026. The procurement is managed by the Department of Foreign Affairs, Trade and Development under the Government of Canada, specifically targeting the National Capital Region. The contract is identified as a subcontract related to the manufacturing sector, classified under NAICS code 333120. The solicitation was posted on June 12, 2026, with a response deadline set for June 29, 2026. The contract details do not specify any set-aside arrangements or particular organization types for bidders. The primary objective is to secure a reliable supplier for this specific type of electric forklift truck, ensuring delivery within the stipulated timeline to support operational needs in the designated area.