Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Friction Clutch Assembly Production (NSN 3010-01-509-0422)

Open

Federal

Response Deadline11/16/2026, 09:00:00 AM PST

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the manufacture and supply of one Friction Clutch Assembly for prime contractors supporting the Department of Defense DLA Weapons Support Land Supply Chain. The scope of work includes the fabrication of all necessary components and the final assembly of the unit in strict accordance with NSN 3010-01-509-0422. The contractor is responsible for performing quality assurance testing as mandated by the DLA Master List of Technical and Quality Requirements. Additionally, the project requires full compliance with the Buy American Act and DFARS 252.225-7001. Performance will take place in Tracy, California, under NAICS code 333612.

General Info

Manufacture and supply one Friction Clutch Assembly for DoD DLA in Tracy, California.

Agency

Department Of Defense → DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

NAICS

333612 - Speed Changer, Industrial High-Speed Drive, and Gear Manufacturing

Place of Performance

TRACY, CA, 95304-5000, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7L1-27-T-3755.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

CLUTCH ASSEMBLY, FRICTI

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 5

subcontract

Response DeadlineNov 16

Submission deadline

Response Deadline

11/16/2026, 09:00:00 AM PSTin 10 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufactures and supplies one Friction Clutch Assembly for prime contractors on DLA Weapons Support Land Supply Chain projects. Fabricates clutch components and assembles the unit per NSN 3010-01-509-0422. Performs quality assurance testing per DLA Master List of Technical and Quality Requirements and ensures compliance with the Buy American Act and DFARS 252.225-7001. Delivers one completed Friction Clutch Assembly.

Similar Contracts

Same NAICS industry code

Bevel Gearshaft Manufacturing and SupplyThis subcontract involves the manufacture and supply of five precision-machined bevel gearshafts for prime contractors supporting the Department of Defense DLA Weapons Support ASC Supplier Oper OEM Division. The components must strictly adhere to NSN 3040-01-024-5191 specifications, with performance taking place at Tinker AFB. The contractor is required to maintain CMMC Level 2 compliance and implement quality control standards according to ISO 9001:2015 or SAE AS9003, utilizing sampling methods per MIL-STD-1916 or ASQ H1331. Additionally, all items must be packaged and marked in accordance with ASTM D3951 and MIL-STD-129.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 15 hours ago

DEADLINE

Rigid Shaft Coupling Manufacturing (Critical Aircraft Engine Component)This subcontract opportunity is for the manufacture of rigid shaft couplings specifically designed for the Pratt and Whitney Model TF-33 engine used in C-141 aircraft. The project involves producing critical aircraft engine components through precision machining to ensure strict adherence to gearbox coupling tolerances and metallurgical requirements. To qualify, manufacturers must maintain SAE AS9100 compliance to meet the rigorous quality standards required for these critical applications. Managed by the DLA Weapons Support Fluid Handling Division under the Department of Defense, this contract is designated as a total small business set-aside. Performance will take place in New Cumberland, Pennsylvania. Interested parties must respond by November 16, 2026, to provide the completed rigid shaft couplings as specified in the technical requirements.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 15 hours ago

DEADLINE

Matched Helical Gear Set Manufacturing/SupplyThis subcontract involves the manufacture and supply of one matched helical gear set for prime contractors supporting DLA Weapons Support procurement contracts. The selected provider must utilize precision gear cutting and grinding equipment to ensure the gear set meets all required technical specifications. Compliance with military standards is mandatory, specifically regarding packaging per RP001 and MIL-STD-2073-1E, and marking per MIL-STD-129. The contract is issued by the Department of Defense under the DLA Weapons Support Land Supply Chain, with performance taking place in Tracy, California. To be eligible, the contractor must maintain active SAM representations and certifications. The final deliverable is one matched helical gear set, delivered FOB Origin and fully compliant with the specified military packaging and marking guidelines.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 15 hours ago

DEADLINE

Manufacturing and Supply of Flexible Shaft Couplings (NSN 3010-01-477-3301)This subcontract involves the manufacturing and supply of 23 flexible shaft couplings, identified as NSN 3010-01-477-3301 and part number 7871X4-12-6, for the DLA Weapons Support Land Supply Chain. The selected provider must be an approved engineering source capable of performing precision machining and fabrication in strict accordance with government design control activity specifications. The contract mandates that all materials used are Berry Amendment compliant and that packaging adheres to MIL-STD-129 and ASTM D3951 standards. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 333612. The response deadline for this requirement is November 16, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 15 hours ago

DEADLINE

CLUTCH ASSEMBLY, FRICTI

Solicitation # SPE7L1-27-T-3755

Solicitation SPE7L1-27-T-3755 is a small business set-aside procurement issued by the Defense Logistics Agency (DLA) for the supply of one friction clutch assembly, identified by NSN 3010-01-509-0422. The contract requires delivery to DLA Distribution San Joaquin in Tracy, California, with a need ship date of May 4, 2027, and an original required delivery date of September 1, 2027. Delivery is specified as FOB Origin, with a delivery window of 168 days after the award. Inspection and acceptance will occur at the destination in accordance with FAR 52.246-1. The contractor must adhere to strict packaging and marking standards, including MIL-STD-129 for labeling and ASTM D3951 for packaging, though the DLA Master List of Technical and Quality Requirements takes precedence. Palletization must comply with RP001. The procurement is subject to the Buy American Act and DFARS 252.225-7001 for quotes above the micro-purchase threshold. Administrative requirements include electronic invoicing via the Wide Area WorkFlow (WAWF) system and compliance with cybersecurity reporting under DFARS 252.204-7012. Evaluation preferences are granted to HUBZone concerns, and the submission of a Safety Data Sheet is mandatory for any hazardous materials to ensure offeror eligibility.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 15 hours ago

DEADLINE

COUPLING, SHAFT, RIGID

Solicitation # SPE7M4-27-T-2517

Solicitation SPE7M4-27-T-2517, issued by the DLA Weapons Support Fluid Handling Division, is for the procurement of 35 rigid shaft couplings (NSN 3010-004981433), identified as critical application items. The contract specifies a delivery period of 168 days with FOB Origin and destination inspection and acceptance. The items must be packaged according to ASTM D3951 and RP001, with marking and labeling adhering to MIL-STD-129. Quality assurance requires the manufacturer's inspection system to comply with ISO 9001:2015 or an equivalent standard, utilizing zero-based sampling plans such as MIL-STD-1916 or ASQ H1331. The contract incorporates several high-level technical and quality requirements, including CMMC Level 2 Self-Assessment (RD004) and Covered Defense Information (RD002). It is subject to various FAR and DFARS clauses, including restrictions on covered defense telecommunications equipment, the Buy American Act, and prohibitions on hexavalent chromium. Invoicing and payment must be processed electronically through the Wide Area WorkFlow (WAWF) system. This is not a small business set-aside, and the procurement falls under NAICS code 333612.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 15 hours ago

DEADLINE

SOLENOID, ELECTRICAL

Solicitation # SPE4A5-27-T-2372

Solicitation SPE4A5-27-T-2372, issued by the DLA Weapons Support ASC Supplier Oper OEM Division, is a request for quotations for 11 electrical solenids, identified by NSN 5945-01-026-9953. The requirement is under NAICS code 333612, with a delivery timeline of 171 days after order and shipping terms set as FOB Origin. Delivery is to be made to the DLA Distribution Depot at Tinker AFB, Oklahoma. Inspection and acceptance will occur at the destination. The procurement is subject to strict technical and quality standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Offerors must comply with the Buy American Act and the Berry Amendment. Proposals utilizing additive manufacturing are ineligible for award, and those proposing alternate parts must provide a complete data package for evaluation. Payment and receiving reports must be processed electronically through the Wide Area WorkFlow system. The solicitation incorporates various FAR and DFARS clauses, including requirements for cybersecurity safeguarding, hazardous material identification, and the HUBZone price evaluation preference.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 15 hours ago

DEADLINE

COUPLING, SHAFT, FLEXIBL

Solicitation # SPE7L1-27-T-3622

Solicitation SPE7L1-27-T-3622 is a federal procurement issued by the DLA Weapons Support Land Supply Chain for the supply of 23 flexible shaft couplings, identified by NSN 3010-01-477-3301 and part number 7871X4-12-6. This is a restricted source item requiring engineering source approval by the government design control activity. The contract specifies a need ship date of May 4, 2027, with an original required delivery date of May 31, 2027. Delivery is set as FOB Origin, with both inspection and acceptance occurring at the destination, specifically the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The procurement is subject to stringent technical and quality requirements, including the DLA Master List of Technical and Quality Requirements, which takes precedence over the ASTM D3951 packaging standard. All packaging must comply with MIL-STD-129 and RP001 palletization requirements. Additionally, the contract prohibits the use of Class I ozone-depleting chemicals and requires adherence to the Buy American Act and Berry Amendment. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with various FAR and DFARS clauses regarding cybersecurity, hazardous material labeling, and the safeguarding of covered contractor information systems.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 15 hours ago

DEADLINE

COUPLING, SHAFT, RIGID

Solicitation # SPE7L1-27-T-3721

Solicitation SPE7L1-27-T-3721 is a request for quotations issued by the DLA Weapons Support Land Supply Chain for the procurement of 26 rigid shaft couplings, identified as NSN 3010016605428. This is designated as a critical application item, with specific part number references to Austal USA, LLC (P/N A545-102-ML-P021 and P/N HY19 24-24 19-05A). The delivery requirement is 168 days after receipt of order, with a need ship date of May 4, 2027, and an original required delivery date of June 19, 2027. Shipping is FOB Origin, with the final destination, inspection, and acceptance point located at DLA Distribution San Joaquin in Tracy, California. The contract mandates strict adherence to military standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization. Technical and quality requirements are governed by the DLA Master List. Administrative requirements include the use of the Wide Area WorkFlow (WAWF) system for invoicing and payment. Compliance is required across various FAR and DFARS clauses, notably the Buy American Act, NIST SP 800-171 cybersecurity assessments, and prohibitions on covered defense telecommunications equipment. The solicitation is categorized under NAICS code 333612 and may be eligible for automated award, with a price evaluation preference for HUBZone concerns.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 15 hours ago

DEADLINE

Solicitation # SPE7L5-27-T-0565

Solicitation SPE7L5-27-T-0565 is a fixed-price, small business set-aside procurement issued by the DLA Weapons Support Land Supplier Opns Engines for the acquisition of 14 groove pulleys (NSN 3020-01-699-2368). The requirement is managed under NAICS code 333612 and utilizes the First Destination Transportation program to optimize shipping costs. The original required delivery date is March 4, 2027, with a need ship date of May 4, 2027, and a delivery lead time of 168 days after order. Delivery is set as FOB Origin, with inspection and acceptance occurring at the destination, specifically the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The contract mandates strict adherence to DLA technical and quality requirements, including RP001 for palletization and MIL-STD-129 for marking. Packaging must comply with MIL-STD-2073-1E, and any hazardous or radioactive materials must be labeled according to 29 CFR 1910.1200 and relevant military standards. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and receiving reports. Key regulatory compliance includes the Buy American Act, DFARS cybersecurity reporting standards, and various safeguarding requirements for covered defense information.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS ENGINES

POSTED

about 15 hours ago

DEADLINE

TORQUE LIMITER ASSEMBL

Solicitation # SPE7L1-27-T-3599

Solicitation SPE7L1-27-T-3599 is a small business set-aside issued by the DLA Weapons Support Land Supply Chain for the procurement of six mechanical torque limiter assemblies, identified by NSN 3010015221368. The requirement is for a critical application item with a need ship date of May 4, 2027, and an original required delivery date of May 17, 2027. Delivery is established as FOB Origin, with both inspection and acceptance occurring at the destination, specifically the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The contract mandates strict adherence to DLA packaging requirements RP001 and marking standards MIL-STD-129. Technical and quality specifications are governed by the DLA Master List, including requirement RQ011 which prohibits the intentional addition of mercury. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and payment. The solicitation incorporates various FAR and DFARS clauses covering cybersecurity, the Buy American Act, and the prohibition of covered defense telecommunications equipment. Quotations were due by November 16, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 15 hours ago

DEADLINE

CLUTCH HALF, POSITIVE, N

Solicitation # SPE7L3-27-T-2083

This fixed-price solicitation, issued by the DLA Weapons Support Land Supplier Operations Vehicle Support, is for the procurement of 223 units of a nonvehicular positive clutch half (NSN 3010-00-770-8383), also described as a positive operating crank. This is a critical application item that may require specific casting or forging tooling. The contract is a total small business set-aside under NAICS 333612, with a required delivery date of June 6, 2027, and a delivery window of 101 days after award. Shipping is FOB Origin, with destination inspection and acceptance required per FAR 52.246-2. The items are to be delivered to DLA Distribution San Joaquin in Tracy, California. Technical and quality requirements are governed by the DLA Master List, and packaging must adhere to MIL-STD-2073-1E and MIL-STD-129. The contract strictly prohibits the intentional addition of mercury or mercury-containing compounds to the hardware. Compliance with DFARS cybersecurity standards, including safeguarding covered defense information and prohibitions on certain telecommunications equipment, is mandatory. The government reserves the right to make multiple awards, with the best value offer receiving at least 60% of the total requirement. Quotations are due by November 16, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 15 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

Same awarding agency

Military-Grade Packaging and Marking ServicesThis subcontract provides specialized packaging and marking services for prime contractors supporting the Department of Defense DLA Weapons Support Land Supply Chain. The scope of work requires strict adherence to military standards, specifically performing packaging according to ASTM D3951, marking and labeling per MIL-STD-129, and palletization per RP001. To ensure compliance, the provider must utilize MIL-SPEC packaging materials and specialized labeling equipment. The operational objective is the delivery of packaged and palletized components via FOB Origin shipment to DLA Distribution San Diego. This project falls under NAICS code 488510, with the primary place of performance located in San Diego, California. Interested parties should note the response deadline of November 16, 2026.

Freight Transportation Arrangement

POSTED

about 15 hours ago

DEADLINE

Fabrication of Rigid Connecting Links (Aluminum Alloy)This subcontract involves the precision machining of 10 aluminum alloy rigid connecting links for the DLA Weapons Support Land Supply Chain. The contractor is required to manufacture components according to NSN 3040-00-011-682 specifications using CNC equipment and calibrated measuring and test equipment. Performance will take place in San Diego, California, under NAICS code 332710. Strict adherence to quality standards RA001, RQ001, and RQ002 is mandatory. Additionally, the provider must maintain JCP certification and ensure full compliance with ITAR and EAR regulations to handle the necessary technical data. The response deadline for this requirement is November 16, 2026.

POSTED

about 15 hours ago

DEADLINE

Supply of Protective Dust and Moisture Seal CapsThis subcontract with the Department of Defense, specifically the DLA Weapons Support Land Supply Chain, involves the procurement of 2,636 protective dust and moisture seal caps. The contractor is responsible for manufacturing or sourcing items that match NSN 5340-01-536-0354, ensuring that no Class I ozone-depleting chemicals are used in the process. All deliverables must adhere to FAR 52.246-2 inspection standards and be delivered to the designated government location in New Cumberland. The opportunity was posted on November 5, 2026, with a response deadline of November 16, 2026. Classified under NAICS code 332999, the contract supports prime contractors fulfilling DLA supply requirements. Interested parties can find further details through the provided DIBBS solicitation link.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 15 hours ago

DEADLINE

Military-Grade Packaging and Labeling ServicesThis subcontract for Military-Grade Packaging and Labeling Services supports prime contractors on DLA supply contracts through the Department of Defense, specifically the DLA Weapons Support Land Supply Chain. The scope of work involves providing specialized packaging and marking for precision components, ensuring all deliverables are ready for transport. Performance takes place in New Cumberland, Pennsylvania, under NAICS code 339999. The contractor is responsible for adhering to strict technical standards, including ASTM D3951 for packaging and MIL-STD-129 for markings and labels. All operations must comply with the DLA Master List of Technical and Quality Requirements using professional industrial packaging materials and labeling equipment. The solicitation was posted on November 5, 2026, with a response deadline of November 16, 2026.

All Other Miscellaneous Manufacturing

POSTED

about 15 hours ago

DEADLINE

Manufacture of Shouldered Shafts (NSN 0001S00000053)This subcontract involves the manufacture of precision shouldered shafts for prime contractors supporting DLA Weapons Support Land Supply Chain contracts. The work requires precision machining and turning to meet NSN 0001S00000053 specifications, utilizing CNC machining centers and precision grinding equipment. A critical requirement of the contract is the execution of a First Article Test to validate all manufacturing processes and ensure strict compliance with Department of Defense quality standards. The project is categorized under NAICS code 332710 and will be performed in New Cumberland. Interested parties must adhere to the response deadline of November 16, 2026. The final deliverable consists of finished shouldered shafts that meet all specified technical and quality benchmarks.

POSTED

about 15 hours ago

DEADLINE

Supply of Brake Shoe Sets (NSN 3040014829983)This subcontract through the Department of Defense DLA Weapons Support Land Supply Chain involves the supply of 17 specialized brake shoe sets conforming to NSN 3040014829983. The items must adhere to RP001 DLA Packaging Requirements and cannot be produced using additive manufacturing without prior approval from the Engineering Support Activity. Performance for this contract will take place in New Cumberland. Eligible providers must possess a valid CAGE code and UEI to participate. The solicitation was posted on November 5, 2026, with a response deadline of November 16, 2026. This requirement falls under NAICS code 331491 and is intended for prime contractors delivering on DLA supply contracts.

Nonferrous Metal (except Copper and Aluminum) Rolling, Drawing, and Extruding

POSTED

about 15 hours ago

DEADLINE

Supply of Cast or Forged Shaft BlanksThis subcontract involves the supply of raw cast or forged metal blanks for shoulder shafts to prime contractors supporting the DLA Weapons Support Land Supply Chain. The selected provider will utilize industrial furnaces, molds, or forging presses to produce initial rough shapes that strictly adhere to NSN material specifications. Deliverables include the rough-cut blanks along with essential documentation, specifically mill test reports and material certifications. Compliance is mandatory regarding safety and quality standards, requiring the provision of Safety Data Sheets in accordance with 29 CFR 1910.1200(g) and Federal Standard No. 313. The performance of this contract is centered in Tracy, California, under NAICS code 332997. Interested parties must respond by November 16, 2026.

Industrial Pattern Manufacturing

POSTED

about 15 hours ago

DEADLINE

Manufacture of Shoulder Shaft (NSN 3040007708384)This subcontract involves the manufacture and supply of shoulder shafts for prime contractors supporting DLA Weapons Support Land Supply Chain contracts. The contractor is responsible for producing the components to meet the technical specifications of NSN 3040007708384 using approved methods such as casting, forging, or additive manufacturing. The process requires precision machining and specialized tooling to ensure the shafts are properly shouldered. Deliverables include the finished shoulder shafts and all necessary Safety Data Sheets in compliance with 29 CFR 1910.1200(g) and Federal Standard No. 313. The performance of this contract is centered in Tracy, California, under NAICS code 332710. Interested parties must respond by November 16, 2026.

POSTED

about 15 hours ago

DEADLINE

Manufacturing and Supply of Boot, Dust and Moisture SealsThis subcontract involves the manufacturing and supply of 1,992 dust and moisture boot seals for prime contractors supporting the DLA Weapons Support Land Supply Chain. All units must be fabricated according to NSN 5340010894991 specifications and must strictly adhere to MIL-STD-130N for marking, as well as MIL-STD-2073-1E and RP001 for packaging and palletization. Performance of the contract will take place in Tracy, California. To be eligible, the provider must meet rigorous security and export control standards, including CMMC Level 2, NIST SP 800-171, and the US/Canada Joint Certification Program. The solicitation was posted on November 5, 2026, with a response deadline of November 16, 2026, under NAICS code 339999.

All Other Miscellaneous Manufacturing

POSTED

about 15 hours ago

DEADLINE

Supply of Loop Clamps (NSN 5340017063690)This subcontract involves the procurement or manufacture of 15 loop clamps under NSN 5340017063690 for the DLA Weapons Support Land Supply Chain. The selected provider must ensure all units meet strict technical specifications and comply with domestic material disclosure requirements. Items are to be packaged and shipped FOB Origin to the New Cumberland Facility. Eligible contractors must maintain an active SAM registration to participate. The project falls under NAICS code 332510 and requires a response by November 16, 2026. All deliverables must be coordinated through the prime contractor to fulfill the Department of Defense supply requirements.

Hardware Manufacturing

POSTED

about 15 hours ago

DEADLINE

First Article Test (FAT) Validation ServicesThis subcontract for First Article Test Validation Services supports prime contractors delivering for the DLA Weapons Support Land Supply Chain. The selected provider is responsible for producing and delivering three FAT units of lot/item 3040/7196982 to Tinker AFB within a 120-day timeframe. The scope of work involves verifying material integrity and dimensional accuracy against the technical data package using CMM inspection equipment and metrology. The final deliverables include the three FAT units and a comprehensive validation report. To qualify for this effort, the contractor must meet strict cybersecurity standards, specifically CMMC Level 2 and NIST SP 800-171 compliance. Performance will take place at Hill AFB under NAICS code 541380.

Testing Laboratories and Services

POSTED

about 15 hours ago

DEADLINE

Manufacture of Shoulder Shafts (NSN 3040007196982)This subcontract involves the manufacture and supply of 14 precision-machined shoulder shafts, identified by NSN 3040007196982, for prime contractors supporting the DLA Weapons Support Land Supply Chain. The components must be fabricated using CNC machining to meet strict aerospace and defense tolerances, with packaging requirements adhering to ASTM D3951 and MIL-STD-129 standards. Performance of the contract will take place at Hill AFB. To be eligible, the provider must maintain CMMC Level 2 and NIST SP 800-171 compliance. The opportunity was posted on November 5, 2026, with a response deadline of November 16, 2026. The work falls under NAICS code 332710 for the Department of Defense.

POSTED

about 15 hours ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

COUPLING, SHAFT, RIGID

Solicitation # SPE7L3-27-T-2069

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 15 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS