Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Fuel Pump Manufacturing or Supply (COTS)

Active

Federal

Response Deadline08/07/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract calls for the supply of 33 units of a fuel pump designated by NSN 2915012507662, requiring strict adherence to military form, fit, and function standards. The product must be commercially available or manufactured to meet military specifications, ensuring compatibility and reliability in operational environments. The procurement is structured as a subcontract under a Total Small Business Set-Aside, as defined by FAR 19.5, limiting eligibility to small businesses registered with the SBA. The North American Industry Classification System code 333911 identifies the sector as other engine and equipment manufacturing, emphasizing the technical nature of the procurement. The solicitation was posted on July 30, 2026, with responses due by August 7, 2026, giving potential suppliers one week to submit offers. The place of performance is specified as New Cumberland, Pennsylvania, with a ZIP code of 17070-5002, indicating where the delivered units must be shipped for military use. The contracting activity falls under the ASC Commodities Division of the Department of Defense, with the full solicitation accessible via the DIBBS platform. This procurement prioritizes small business participation and requires the delivered fuel pumps to meet rigorous defense standards without deviation in performance or compatibility.

General Info

33 fuel pumps supplied per military specs under small business set-aside, delivery to New Cumberland, PA.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

333911 - Pump and Pumping Equipment ManufacturingView NAICS

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 30

subcontract

Response DeadlineAug 7

Submission deadline

Response Deadline

08/07/2026, 05:00:00 PM UTCin 6 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → ASC COMMODITIES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → ASC COMMODITIES DIVISION

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply of 33 units of PUMP, FUEL, AIR (NSN: 2915012507662) meeting military form, fit, and function requirements. The item must be commercially available or manufactured to military specifications.

Similar Contracts

Same NAICS industry code

Water Pump Assembly SupplyThe contract is for the supply of a water pump assembly with part number G7G7G7 specifically designed for integration into aircraft lavatory systems, with stringent requirements for marine or aerospace durability to ensure reliable operation under extreme environmental conditions. The item must meet high-performance standards suitable for aviation use, emphasizing longevity, corrosion resistance, and operational stability in high-vibration, high-humidity settings typical of aircraft environments. This is a subcontract under the NAICS code 333911, indicating manufacturing of other commercial and service industry machinery, and is administered by the Naval Supply Systems Command Fleet Logistics Center Puget Sound under the U.S. Department of Defense. The solicitation was posted on July 31, 2026, with a firm deadline for responses set for August 12, 2026, at 5:00 p.m. The contract does not specify a set-aside classification or reserved status for small businesses, and no point of contact details are provided within the data. Performance location and office address information are incomplete, but the end-use context and governing agency confirm the work is directly tied to military aviation support systems. Interested parties must submit compliant proposals by the deadline to qualify for award, with the expectation that the delivered assemblies will undergo rigorous quality verification before integration into naval aircraft systems.

Navsup Flt Logistics Ctr Puget Sound

POSTED

DEADLINE

Diesel-Powered Sewage Transfer Pump SupplyThe contract calls for the supply and delivery of a single diesel-powered sewage transfer pump, procured as a commercial off-the-shelf item, meeting all required military standards for packaging, labeling, and traceability. The equipment must be fully compliant with Department of Defense specifications for handling, documentation, and identification to ensure seamless integration into military logistics and operational environments. Delivery is to be made to APO 09461, with the item intended for use in military installations or deployed settings requiring reliable wastewater transfer capabilities under field conditions. The solicitation is classified as a subcontract under NAICS code 333911, indicating it falls within the pump and pumping equipment manufacturing sector. The opportunity was posted on July 31, 2026, with responses due by August 13, 2026, at 2:00 PM. The contracting agency is the Department of Defense, specifically under the FA5587 48 Cons administrative unit, though no point of contact or set-aside details are provided. All deliverables must adhere strictly to military traceability protocols, ensuring full accountability from manufacturing through final delivery.

FA5587 48 Cons (admin Only No Req)

POSTED

DEADLINE

Centrifugal Pump Unit SupplyThe contract is for the supply of three centrifugal pump units identified by NSN 4320015863481, with all units required to meet established technical specifications and National Stock Number standards. It is structured as a subcontract under a Total Small Business Set-Aside designation, meaning only small businesses qualify to bid, as defined by the Small Business Administration under FAR 19.5. The North American Industry Classification System code is 333911, classifying the procurement within the pump and pumping equipment manufacturing sector. The solicitation was posted on July 30, 2026, with proposals due by August 10, 2026, and the place of performance is specified as Tracy, California, with a zip code of 95304-5000. The contract is managed by the Maritime Supply Chain under the Department of Defense, and all work must be completed in compliance with federal procurement regulations applicable to small business set-asides.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Centrifugal Pump Unit with Motor SupplyThe contract entails the procurement and delivery of three centrifugal pump units with integrated motors, identified by NSN 4320015453034, to be supplied in full compliance with Defense Logistics Agency packaging, labeling, and hazard marking standards. Each unit must be properly prepared for transport and storage, ensuring safety and regulatory adherence throughout the supply chain. The solicitation is designated as a Women-Owned Small Business Set-Aside under NAICS code 333911, restricting eligibility to qualified WOSB entities. The opportunity was posted on July 30, 2026, with responses due by August 10, 2026, and is structured as a subcontract under the Maritime Supply Chain division of the Department of Defense. Deliveries will be performed to the specified place of performance in New Cumberland, Pennsylvania, with a zip code of 17070-5002, and interested parties must submit proposals through the official DIBBS portal by the stated deadline.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Air Compressor Supply and DeliveryThe contract mandates the supply and delivery of three commercial off-the-shelf air compressors identified by NSN 4310016600641, with strict adherence to military packaging and labeling standards as required for defense logistics. All items must comply with destination inspection protocols to ensure readiness and conformity before acceptance. The procurement is structured as a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified by the SBA are eligible to respond, reinforcing support for small business participation in defense contracting. The NAICS code 333911 indicates the industry classification for other commercial and service industry machinery manufacturing, aligning with the nature of the compressors being procured. The contract was posted on July 30, 2026, with responses due by August 10, 2026, and the place of performance is designated as New Cumberland, Pennsylvania, with a specific zip code provided for delivery coordination. The procurement falls under the Maritime Supply Chain organization within the Department of Defense, underscoring its relevance to naval or coastal logistics operations.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Vacuum Pump Unit Supply (COTS)The contract specifies the supply of one commercial off-the-shelf vacuum pump unit identified by NSN 4310016721960, engineered to meet military specifications with complete traceability throughout the supply chain. The unit must be labeled in full compliance with MIL-STD-129 standards to ensure proper identification, handling, and logistics integration within defense operations. Performance is mandated to occur at Suffolk, Virginia, with the delivery and acceptance subject to strict adherence to military procurement protocols. The solicitation is issued under the NAICS code 333911 for Vacuum Pump and Blower Manufacturing, reflecting the specialized nature of the equipment. This subcontract is part of the Department of Defense's Maritime Supply Chain ESOC Buy initiative, with responses required by August 10, 2026, following a posted solicitation date of July 30, 2026, ensuring timely acquisition of critical operational equipment.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Centrifugal Pump Unit SupplyFifteen centrifugal pump units are required under a subcontract to meet specific technical specifications, including compliance with MIL-STD-129 labeling standards and applicable defense procurement regulations. The contract is issued by the Department of Defense through the MARITIME SUPPLY CHAIN and is targeted for performance in Jacksonville, Florida, with a ZIP code of 32212-0103. The solicitation, categorized under NAICS code 333911 for pump and pumping equipment manufacturing, was posted on July 30, 2026, and responses must be submitted by August 10, 2026. All units must adhere strictly to military standards for documentation, packaging, and identification, ensuring seamless integration into defense logistics systems. The contract is not subject to any set-aside provisions and is open to qualified subcontractors through the DIBBS platform.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Submersed Air Pump Supply (Commercial Off-the-Shelf Item)The contract requires the procurement and delivery of 15 units of submerged air pumps with part number 520-12519-2, which must comply with military specifications including appropriate labeling and packaging. These are commercial off-the-shelf items sourced under a subcontract arrangement, with no set-aside designation applied. The solicitation was posted on July 30, 2026, and responses are due by August 7, 2026. The items are to be delivered to Tinker Air Force Base, Oklahoma, with a zip code of 73145-8000. The contracting activity falls under the Department of Defense, specifically the ASC SUPPLIER OPER AE AND AF DIV, and the North American Industry Classification System code is 333911 for other general purpose machinery manufacturing. All units must be fully compliant with military standards and properly documented for acceptance.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Agitator Pump Supply (Submersible, Hydraulic-Driven)The contract seeks the supply of a submersible, hydraulic-driven agitator pump capable of delivering 200 gallons per minute at 50 pounds per square inch pressure, specifically designed for sediment agitation in reservoir environments. The equipment must meet stringent operational requirements to ensure effective sediment suspension and management in aquatic settings, with performance criteria aligned to field applications in challenging underwater conditions. The pump is intended for use in government-led environmental management or restoration projects under the purview of the Department of the Interior’s Great Plains Regional Office. The solicitation was posted on July 30, 2026, with responses due by August 10, 2026, and is classified as a subcontract under NAICS code 333911, which pertains to other commercial and service industry machinery manufacturing. There is no set-aside designation specified, indicating the opportunity is open to all qualified vendors without preferential treatment based on business size or status. The place of performance and point of contact details are not provided, and the procurement is accessible through the SAM.gov portal for potential bidders seeking further technical specifications or submission guidelines.

Great Plains Regional Office

POSTED

DEADLINE

Dredge Pump Supply (High-Pressure Hydraulic)The contract involves the supply of a high-pressure hydraulic dredge pump capable of delivering 400 gallons per minute at 100 pounds per square inch pressure, including all essential internal components such as the impeller, casing, wear plate, mechanical seal, and o-rings. This equipment is critical for specialized dredging operations requiring reliable, sustained high-pressure performance under demanding conditions, and the full assembly must meet rigorous operational and durability standards to ensure continuous use in rugged environments. The solicitation is classified as a subcontract under NAICS code 333911, associated with the Department of the Interior’s Great Plains Regional Office, with a response deadline of August 10, 2026, at 4:00 p.m. The posting date was July 30, 2026, providing suppliers approximately three weeks to prepare and submit compliant proposals. While no specific set-aside designation or place of performance details are provided, interested parties must ensure their submissions align with the technical specifications and delivery expectations outlined in the solicitation, with all correspondence and proposals directed through the official SAM.gov portal linked in the document.

Great Plains Regional Office

POSTED

DEADLINE

Custom Fire Pump System IntegrationThe contract calls for the supply and integration of a custom fire pump system designed to deliver 200 gallons per minute at 300 pounds per square inch of pressure, ensuring robust performance under demanding fire suppression conditions. All equipment must meet stringent compliance requirements under OSHA and NFPA standards, with comprehensive certified testing conducted prior to delivery and detailed documentation provided along with an official compliance plaque. The system must be fully integrated for immediate operational readiness at the designated location in Washington, D.C., 20019. This subcontract, issued under NAICS code 333911 by the USDA Forest Service within the Department of Agriculture, requires all proposals to be submitted by August 19, 2026, at 6:00 PM Eastern Time. The posting date was July 30, 2026, indicating a four-week window for qualified vendors to respond. There is no specified set-aside status, and the opportunity is open to eligible subcontractors seeking to fulfill this critical infrastructure requirement for federal emergency response systems.

USDA Forest Service

POSTED

DEADLINE

Fire Pump System IntegrationThe contract involves the supply, certification, and integration of a fire pump system including the installation of controls on the operator’s panel and comprehensive performance testing to ensure full operational compliance. The work is scoped under NAICS code 333911, indicating specialized machinery manufacturing for fire protection systems, and is structured as a subcontract to support the USDA Forest Service’s infrastructure needs. The system must meet stringent performance standards, with certification and testing protocols required to validate reliability under emergency conditions, and the controls integration must allow for seamless monitoring and operation via the designated operator panel. Performance is anticipated at the location identified by ZIP code 80742, though specific city or state details are not provided in the data. The opportunity was posted on July 30, 2026, with a response deadline of August 19, 2026, giving potential vendors approximately three weeks to prepare and submit proposals. While no set-aside classification or point of contact is listed, the solicitation is accessible through the SAM.gov portal, and bidders are expected to fully comply with federal procurement requirements governing subcontracted technical services for federal land management agencies.

USDA Forest Service

POSTED

DEADLINE

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

Surveying and Site Layout ServicesThis contract is for surveying and site layout services under a Total Small Business Set-Aside, reserved exclusively for small businesses as defined by the SBA, with the NAICS code 541370 corresponding to surveying and mapping services. The work involves comprehensive topographic surveying, verification of property boundaries, and exact layout of structures and infrastructure elements to support precise construction and development activities. The solicitation was posted on August 1, 2026, and responses are due by August 24, 2026, with the ordering activity being the ASC Commodities Division under the Department of Defense. The services will be performed at an unspecified location, and while no point of contact or detailed address is provided, the opportunity is publicly accessible through the DIBBS platform. The contract is structured as a subcontract, indicating it may be part of a larger project requiring specialized geospatial and site verification expertise.

Surveying and Mapping (except Geophysical) Services

POSTED

about 3 hours ago

DEADLINE

Paving and Asphalt ServicesThe contract is for paving and asphalt services covering grading, base preparation, and asphalt installation for roads, parking lots, and accessways under a total small business set-aside, as defined by the SBA and FAR 19.5, with a NAICS code of 237310. It is issued as a subcontract by the ASC Commodities Division within the Department of Defense, with responses required by August 24, 2026, following a posting date of August 1, 2026. Work must be performed at locations determined by the agency, though specific cities or states are not listed, and the solicitation is accessible through the DIBBS system for qualified small business contractors seeking to bid.

Highway, Street, and Bridge Construction

POSTED

about 3 hours ago

DEADLINE

Concrete Formwork and PlacementThe contract titled Concrete Formwork and Placement is a small business set-aside under the SBA Total Small Business Set-Aside provision, exclusively available to qualified small businesses. It involves the full scope of concrete construction activities including forming, reinforcing, and pouring for foundations, slabs, walls, and other structural elements, aligned with NAICS code 238110 for concrete work. The solicitation was posted on August 1, 2026, with responses due by August 24, 2026, and is issued as a subcontract under the Department of Defense through the ASC Commodities Division. The place of performance and organizational details are not specified, but the work is expected to support military or defense-related infrastructure needs. All proposals must be submitted through the DIBBS portal prior to the deadline, and contractors must meet small business certification requirements to be eligible for award.

Poured Concrete Foundation and Structure Contractors

POSTED

about 3 hours ago

DEADLINE

Plumbing and Piping Systems InstallationThe contract titled Plumbing and Piping Systems Installation is a subcontract under a Total Small Business Set-Aside, designated for small businesses as defined by the SBA, with a NAICS code of 238220 covering plumbing, heating, and air-conditioning contractors. It pertains to the installation of potable water, waste drainage, and gas piping systems within commercial or institutional buildings, requiring specialized expertise in mechanical systems compliance and building code adherence. The solicitation was posted on August 1, 2026, with a response deadline of August 24, 2026, and is managed by the ASC Commodities Division under the Department of Defense, though specific performance location and point of contact details are not provided. Contractors must submit proposals before the deadline to be considered for award under this set-aside, ensuring eligibility and compliance with small business certification requirements.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

about 3 hours ago

DEADLINE

Electrical Installation and Wiring ServicesThe contract titled Electrical Installation and Wiring Services is a subcontract under a Total Small Business Set-Aside, as defined by the SBA, meaning only small businesses are eligible to bid. It falls under NAICS code 238210, which covers electrical contracting services, and involves the installation of comprehensive electrical systems for commercial or infrastructure projects, including wiring, conduits, lighting, and power distribution components. The solicitation was posted on August 1, 2026, with a deadline for responses set for August 24, 2026, and is managed by the ASC Commodities Division within the Department of Defense. While specific location details and point of contact information are not provided, the contract is accessible via a DIBBS portal link, indicating it will be procured through Department of Defense procurement systems.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

about 3 hours ago

DEADLINE

DETECTOR, RADIO FREQUENCY

Solicitation # SPE4A6-26-R-XC21

The contract pertains to the procurement of a Radio Frequency Detector under solicitation SPE4A6-26-R-XC21, a total small business set-aside with a ceiling value of $250,000, awarded through an indefinite-delivery, indefinite-quantity (IDIQ) structure with a five-year term. The item, identified by NSN 5895-01-211-0211, requires full compliance with military packaging standards MIL-STD-2073-1E and marking requirements under MIL-STD-129, including bold external labeling of “First Article Exhibits - Do Not Post to Stock” for FAT samples. The contractor must establish and maintain an inspection system compliant with FAR 52.246-2 or 52.246-3, retain all records supporting conformance, and provide written notice at least 14 days before shipment if DCMA assumes quality admin responsibilities. First Article Test reports must follow the DI-NDTI-80809B format, include confirmation that production units will be manufactured using the same processes and facilities, and be submitted to designated DLA monitoring addresses based on the issuing activity—Aviation, Land, Maritime, or Troop Support—with preferred electronic routing. For Government-performed FAT, units must be shipped via traceable carriers with hard-copy attachments including contract documents, certifications, drawings, and a pre-paid return label, while external packaging must display mandatory markings and internal packages must include a receipt documentation copy. The contract mandates electronic invoicing exclusively through WAWF and adherence to stringent supply chain controls, including prohibitions on covered telecommunications equipment per DFARS 252.204-7016 and FAR 52.204-24, alongside federal sustainability, hazardous materials, and sick leave requirements. Delivery schedules stipulate 120 days for FAT unit shipment, another 120 days for Government evaluation, and 378 days for final production delivery after FAT approval, with FOB destination terms applying to FAT samples. Offerors must represent their small business status, UEI, and CAGE code in SAM, and disclose any use of restricted equipment, involvement with sanctioned countries, or inverted corporate status. All proposals must be submitted electronically via DIBBS or email to the designated point of contact, with no paper submissions permitted. The award will be based on a best-value trade-off, weighing past

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 3 hours ago

DEADLINE

Quality Assurance and Inspection Services (MIL-STD-1916 Compliance)The contract mandates independent quality verification services adhering to MIL-STD-1916 sampling procedures to assess compliance of delivered units against defined acceptable quality levels for critical, major, and minor defects. This ensures that all products meet rigorous military standards for reliability and performance, with inspection outcomes directly tied to acceptance or rejection criteria based on statistically valid sampling methods. The work is performed under a subcontract structure and is specifically scoped to maintain stringent quality control protocols throughout the delivery process. Quality assurance activities are to be conducted at the place of performance located in Cherry Point, North Carolina, with the contract being administered by the ASC Commodities Division under the Department of Defense. The solicitation was posted on July 31, 2026, and responses are due by August 5, 2026, indicating a short turnaround window for qualified vendors to submit proposals. The North American Industry Classification System code 541330 identifies this as a professional, scientific, and technical services requirement centered on quality control and testing, targeting specialized subcontractors with demonstrated expertise in defense-related inspection and compliance.

Engineering Services

POSTED

DEADLINE

Packaging, Labeling, and Palletization Services for Military ShipmentThe contract requires specialized preservation, packaging, labeling, and palletization services for indicating panels in full compliance with MIL-STD-2073-1E, MIL-STD-129, and DLA RP001 standards, ensuring military-grade readiness for transport and storage. All work must be performed to meet strict federal specifications for durability, identification, and handling procedures, with final delivery designated as FOB Origin, meaning the contractor assumes responsibility until the goods are loaded at the designated point of shipment. The services are critical to supporting military logistics and must be executed with precision to maintain supply chain integrity. This subcontract, issued under NAICS code 493190 by the ASC Commodities Division of the Department of Defense, is solicited with a response deadline of August 5, 2026, and the performance location is tied to Cherry Point, North Carolina, with ZIP code 28533-5040. Although no set-aside designation is specified, participation is open to qualified vendors capable of delivering compliant solutions under tight federal guidelines. The solicitation is managed through the DIBBS platform, and timely submission is essential to be considered for award.

Other Warehousing and Storage

POSTED

DEADLINE

Manufacture and Supply of Indicating Light Panel (NSN: 6220013547598)The contract requires the full manufacturing, testing, packaging, and delivery of four military-spec indicating light panels identified by NSN 6220013547598, with strict compliance to MIL-STD-129, MIL-STD-2073-1E, and DLA RP001 standards for documentation, packaging, and labeling. All work must be performed to meet rigorous defense specifications ensuring operational readiness and interoperability within military systems. The panels are to be delivered to a designated performance location in Cherry Point, North Carolina, with zip code 28533-5040, and the contract falls under NAICS code 335313 for electrical lighting equipment manufacturing. This is a subcontract opportunity issued by the ASC Commodities Division under the Department of Defense, with a response deadline of August 5, 2026, and a posted date of July 31, 2026. The solicitation is accessible via the DIBBS portal and requires precise adherence to defense logistics protocols for packaging and traceability. No set-aside type is specified, indicating it is open to eligible subcontractors without restriction based on business size or veteran status. Successful bidders must demonstrate capacity to produce, test, and package units in full compliance with military standards and deliver them on schedule to meet critical deployment timelines.

Switchgear and Switchboard Apparatus Manufacturing

POSTED

DEADLINE

Supply Chain Traceability and Documentation ServicesThe contract requires comprehensive supply chain traceability and documentation services to ensure full visibility and accountability of components and processes throughout the lifecycle, with all records maintained in strict compliance with Defense Logistics Agency and Federal Acquisition Regulation standards. Work must support audit readiness at all times, enabling seamless verification by government oversight bodies through accurate, timely, and complete documentation that traces materials from origin to final assembly or delivery. The opportunity is classified as a subcontract under NAICS code 541611, issued by the ASC Commodities Division of the Department of Defense, with a posting date of July 31, 2026, and a response deadline of August 18, 2026. The place of performance and exact location details are not specified, but performance is expected to align with DLA’s operational requirements across the defense supply chain. All proposals must demonstrate proven capability in maintaining traceable, auditable records and systems that meet the stringent compliance and transparency mandates of federal defense contracting.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Packaging and Preservation Services for Defense LogisticsThe contract calls for comprehensive packaging, preservation, and marking services for wiring harnesses in strict compliance with Defense Logistics Agency guidelines and MIL-STD-129 requirements to guarantee the integrity and readiness of shipments for military use. All work must adhere to standardized procedures ensuring durable protection against environmental and physical damage during transit and storage, with precise labeling and documentation to support traceability and logistics operations across the defense supply chain. This subcontract opportunity, issued by the ASC Commodities Division under the Department of Defense, is classified under NAICS code 493190 and is open for responses until August 18, 2026. The performance location and specific delivery details are not specified, but successful bidders must be prepared to meet rigorous military standards for packaging and preservation without exception. The project emphasizes reliability and compliance over cost, targeting experienced service providers capable of handling sensitive defense components with proven expertise in federal supply chain protocols.

Other Warehousing and Storage

POSTED

DEADLINE

Hazardous Materials Compliance and Safety Data Sheet (SDS) ManagementThe contract pertains to the comprehensive management of hazardous materials used in manufacturing operations, requiring precise identification, labeling, and documentation to ensure regulatory compliance. A core responsibility includes the preparation and maintenance of Safety Data Sheets (SDS) in accordance with established safety standards, ensuring that all hazardous substances are accurately described, properly categorized, and accessible to relevant personnel. This work demands strict adherence to occupational safety and environmental regulations, with an emphasis on accuracy, consistency, and timeliness in recordkeeping to mitigate risk and support workplace safety. The solicitation is structured as a subcontract under NAICS code 541620, which classifies it within environmental consulting and related services. It is managed by the ASC Commodities Division, a component of the Department of Defense, indicating the scope is tied to defense-related manufacturing activities. The response deadline is August 18, 2026, with the opportunity posted on July 31, 2026, allowing potential offerors sufficient time to prepare submissions. Performance location details are not specified, suggesting the work may be conducted at multiple sites or facilities under the oversight of the contracting office. All activities must align with federal mandates governing hazardous materials handling, and compliance is non-negotiable for contract success.

Environmental Consulting Services

POSTED

DEADLINE