Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Full-Service Maintenance & Repair Program

Active

Federal

Response Deadline08/24/2026, 04:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract outlines a full-service maintenance and repair program for urology scopes requiring a minimum of 90% uptime, ensuring continuous operational availability for critical medical procedures. All repairs and preventive maintenance must be performed using only original equipment manufacturer parts to guarantee performance, safety, and compatibility with existing systems. Loaner equipment support is a mandatory component, providing immediate replacement units during repair cycles to minimize downtime and maintain clinical workflow. The program is structured as a subcontract under the Department of Veterans Affairs, managed by the 262-NETWORK Contract Office 22, and falls under the NAICS code 811212 for medical equipment and supplies repair and maintenance. Proposals must be submitted by August 24, 2026, with the solicitation posted on July 27, 2026, and performance expected to meet stringent reliability standards across all supported facilities.

General Info

Full-service urology scope maintenance with 90% uptime, OEM parts, loaners, VA subcontract, NAICS 811212, proposal due August 24, 2026.

Agency

Department Of Veterans Affairs → 262-NETWORK Contract Office 22 (36C262)View Agency

NAICS

811212 - Computer and Office Machine Repair and MaintenanceView NAICS

Place of Performance

AZ

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 27

subcontract

Response DeadlineAug 24

Submission deadline

Response Deadline

08/24/2026, 04:00:00 PM UTCin 26 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Veterans Affairs → 262-NETWORK Contract Office 22 (36C262)

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Veterans Affairs → 262-NETWORK Contract Office 22 (36C262)

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Comprehensive repair, preventive maintenance, and loaner support for urology scopes with requirement for ≥90% uptime and use of OEM parts.

Similar Contracts

Same NAICS industry code

First Article Inspection (FAI) Sample Preparation and ComplianceThe contract requires the preparation and delivery of one upgraded fairlead beam for government inspection, with the explicit expectation that all deficiencies identified during the inspection must be corrected. The successful contractor must ensure that all remaining units produced thereafter fully conform to the approved sample to maintain uniformity and compliance with technical specifications. This effort is part of a broader quality assurance initiative under a subcontract arrangement tied to Department of Defense requirements, with performance to take place in Ramstein-Miesenbach, Germany, at a zip code of 66877. The work falls under NAICS code 811212 and is subject to a strict deadline for response, which closes on August 7, 2026, with submission timing critical to avoid disqualification. The contractor will be held accountable for meeting precise standards, as the approved sample serves as the definitive benchmark for all subsequent production units.

FA5613 700 Cons Pk

POSTED

about 18 hours ago

DEADLINE

Fire Alarm System Repair & TroubleshootingThe contract titled Fire Alarm System Repair & Troubleshooting requires the provision of on-demand technical services to identify, diagnose, and repair malfunctioning components within fire alarm systems, including control panels, circuits, and initiating devices. Services must be delivered promptly to ensure system integrity and compliance with safety standards, with a focus on minimizing downtime and maintaining operational reliability across the Dallas Area Rapid Transit network. The work is classified as a subcontract under NAICS code 811212, and responses are due by August 4, 2026, with the opportunity posted on July 27, 2026. Performance is expected to occur within the jurisdiction of Texas, though specific geographic details are not provided. The contracting entity is Dallas Area Rapid Transit, and no set-aside provisions or point of contact information are indicated.

Dallas Area Rapid Transit

POSTED

DEADLINE

Fire Alarm System Preventive MaintenanceDallas Area Rapid Transit is seeking a subcontractor to perform scheduled preventive maintenance on fire alarm control panels to ensure continuous and reliable system operation. The scope of work includes routine cleaning, battery testing, firmware verification, and comprehensive diagnostics of fire alarm systems across all designated locations. This maintenance is critical to maintaining compliance with safety standards and preventing operational failures. The contract is open for bids with a deadline of August 4, 2026, and falls under NAICS code 811212 for commercial and industrial machinery and equipment repair and maintenance. The opportunity is posted as a subcontract with no set-aside designation and is accessible through the DART Bonfire Hub portal.

Dallas Area Rapid Transit

POSTED

DEADLINE

Warranty and Post-Installation Support ServicesTexas A&M University is seeking a subcontractor to provide comprehensive warranty coverage, corrective maintenance, and technical support services for a period following system installation. The contractor must ensure rapid response to any defects or malfunctions during the warranty term, with a strong emphasis on timely repairs, accurate repair logging, and ongoing technical assistance to maintain system performance. The services are to be delivered under the NAICS code 811212, which pertains to electronic and other machinery repair and maintenance, and the contract opportunity is open for submission until August 17, 2026. The place of performance and specific location details are not defined, indicating the work may be performed remotely or at various sites tied to the university's operations. Interested parties can access further details through the provided online portal.

Texas A&M University

POSTED

DEADLINE

Vote Tabulator Maintenance & Technical SupportThe contract entails ongoing maintenance, troubleshooting, diagnostics, and repair services for Image Cast 2 Vote Tabulators to ensure they remain fully operational during election cycles. The work is focused on sustaining the reliability and functionality of these voting machines, with requirements centered on timely response, technical expertise, and adherence to election readiness timelines. Services must support consistent performance under high-stress conditions and include on-site intervention as needed to address malfunctions, software issues, or hardware failures. The contract is classified as a subcontract under NAICS code 811212, managed by the Procurement Department under the agency name PRO15 - Procurement Department of Massachusetts. Performance is required at School Street in Brockton, with a zip code of 02301. The solicitation was posted on July 27, 2026, and responses are due by August 10, 2026. There is no set-aside designation specified, and the point of contact information is not provided in the data. All activities must align with the operational demands of election periods, ensuring accurate vote tabulation and minimizing downtime during critical voting events.

PRO15 - Procurement Department

POSTED

DEADLINE

Installation and Commissioning SupportThe contract requires on-site installation, calibration, and comprehensive testing of a poultry isolator delivered to Texas A&M University, ensuring full operational readiness upon deployment. Technical training must be provided to university staff to enable proficient use, maintenance, and troubleshooting of the equipment, with all services performed at the university’s facility. The work is classified as a subcontract under NAICS code 811212 and is part of an institutional procurement effort managed by Texas A&M University. Proposals must be submitted by August 11, 2026, and the project is expected to begin immediately after award, with performance centered at the university’s location. No set-aside provisions or specific geographic restrictions beyond the place of performance are indicated.

Texas A&M University

POSTED

DEADLINE

Preventative Maintenance Services for BAB500 SystemThe contract outlines scheduled preventative maintenance services for the BAB500 system, ensuring continued operational readiness through comprehensive diagnostics, lubrication, component inspections, software updates, and performance optimization. These activities are designed to proactively address potential failures and maintain system efficiency without disruption to mission-critical functions. The work is classified as a subcontract under NAICS code 811212 and is managed by the Naval Supply Systems Command Fleet Logistics Center Norfolk, a unit of the Department of Defense. All services must be performed at the designated location in San Antonio, Texas, with ZIP code 78234. Proposals are due by August 3, 2026, at 4:00 p.m. Eastern Time, following a posting date of July 27, 2026. No set-aside provisions are specified, and the contract opportunity is accessible via the SAM.gov portal.

Navsup Flt Logistics Ctr Norfolk

POSTED

DEADLINE

High-Temperature Removable Chamber Delivery and Installation SupportThe contract involves supporting the delivery, unpacking, alignment, calibration assistance, and initial operational testing of a 1200°C removable temperature chamber to be integrated with an existing rotary drive tribometer at NASA Marshall Space Flight Center. The vendor is responsible for ensuring all on-site technical setup is completed accurately and efficiently, with a focus on seamless compatibility and functionality within the existing testing apparatus. This includes handling all logistical aspects of transport and physical installation, as well as providing expert guidance during the calibration phase to ensure the chamber meets operational specifications under extreme thermal conditions. The work is classified as a subcontract under NAICS code 811212 and is administered by the NASA Shared Services Center on behalf of the National Aeronautics and Space Administration. The solicitation was posted on July 27, 2026, with proposals required by no later than 8:00 PM Eastern Time on July 30, 2026. While specific location details are not provided, the performance site is confirmed to be at NASA Marshall Space Flight Center. The nature of the work demands specialized technical expertise in high-temperature instrumentation and precision mechanical integration, with an emphasis on reliability and safety during initial system commissioning.

NASA Shared Services Center

POSTED

DEADLINE

Preventative Maintenance Services for North Star Panel SystemThe contract covers the provision of scheduled preventative maintenance services for the North Star Panel system over a 12-month period, requiring two mandatory on-site service visits to ensure optimal system performance and reliability. This subcontract is issued under the NAICS code 811212, indicating it pertains to electronic equipment repair and maintenance, and is managed by the Naval Surface Warfare Center Crane under the Department of Defense. The work is to be performed at Crane, Indiana, with a zip code of 47522, and the solicitation was posted on July 27, 2026, with proposals due by August 3, 2026. The contract does not specify a set-aside type and lacks detailed point of contact information, but the place of performance and agency affiliation confirm its military and defense scope. Service delivery must align with the system’s operational requirements, and failure to complete both on-site visits within the timeframe may constitute noncompliance.

POSTED

DEADLINE

Medical Device Installation and Commissioning SupportThe contract requires on-site installation, calibration, and commissioning of the CRC-55TW Dose Calibrator at Naval Medical Center Portsmouth, ensuring full operational readiness in a clinical environment. The scope includes comprehensive validation testing to meet regulatory and safety standards, along with direct coordination with clinical staff to integrate the device into existing workflows and provide necessary training. All activities must be completed at the specified location in Portsmouth, Virginia, with zip code 23708. The contract falls under the NAICS code 811212 and is classified as a subcontract under the Defense Health Agency, a division of the Department of Defense. It was posted on July 27, 2026, with a strict response deadline of July 29, 2026, indicating an accelerated procurement timeline. The work is critical to maintaining accurate radiopharmaceutical dosing capabilities at the medical facility, and compliance with clinical and technical requirements is essential for successful contract execution.

Defense Health Agency

POSTED

DEADLINE

in about 13 hours

On-Site Technical Support & Field Service for POC DevicesThe contract requires on-site technical support and field service for point-of-care laboratory instruments at VA Palo Alto and its affiliated clinics, with all work performed by manufacturer-certified technicians using only new, authorized parts. Services include installation, calibration, troubleshooting, and repair of POC devices to ensure continuous, reliable operation in clinical environments. The work must adhere to strict quality and compliance standards, prioritizing equipment performance and patient safety through expert-level service delivery. The opportunity is classified as a subcontract under NAICS code 811212, with a response deadline of August 10, 2026, and a posting date of July 27, 2026. Performance is exclusively located in Palo Alto, California, 94304, under the purview of the Department of Veterans Affairs, specifically the 261-NETWORK Contract Office 21. No set-aside provisions are specified, and the contract is managed through the federal procurement system with the provided SAM.gov link for further submission details.

261-NETWORK Contract Office 21 (36C261)

POSTED

DEADLINE

Technical Support and Maintenance ServicesThe contract provides ongoing technical support, preventive maintenance, and repair services for a dermatologic laser system, with service level agreement-backed response times to ensure timely resolution of technical issues. Services are scoped to maintain the system’s operational integrity and performance, with specific attention to reliability and uptime critical for clinical applications. The work is governed under a subcontract arrangement and falls under NAICS code 811212, indicating it involves miscellaneous repair and maintenance services. The opportunity was posted on July 27, 2026, with a response deadline of August 11, 2026, and is managed by the Department of Veterans Affairs through the 260-NETWORK Contract Office 20. Performance is required to take place in White City, Oregon, with a zip code of 975032. While no point of contact is listed and set-aside details are unspecified, the contract emphasizes accountability through SLA commitments and is intended to support the consistent functionality of medical equipment vital to veteran care.

260-NETWORK Contract Office 20 (36C260)

POSTED

DEADLINE

More opportunities from Department Of Veterans Affairs → 262-NETWORK Contract Office 22 (36C262)

Same awarding agency

6515--Monitor/Defibrillator

Surgical and Medical Instrument Manufacturing

POSTED

about 18 hours ago

DEADLINE

6515--obturati units

Surgical and Medical Instrument Manufacturing

POSTED

about 18 hours ago

DEADLINE

6515--Crash Cart

Surgical Appliance and Supplies Manufacturing

POSTED

about 18 hours ago

DEADLINE

J043--PMR POWEREX AIR SYSTEM

Electronic and Precision Equipment Repair and Maintenance

POSTED

about 18 hours ago

DEADLINE

F107--Asbestos, Lead Based Paint and other Hazardous Material Survey Testing ServicesThe Department of Veterans Affairs, through Network Contracting Office 22, has issued a Request for Information (RFI) under solicitation number 36C26226Q0377 to gather market research on asbestos, lead-based paint, radon gas, and other hazardous material survey testing services at the Tibor Rubin VA Medical Center in Long Beach, California. This RFI, which is explicitly not a solicitation, seeks information from potential contractors—particularly Service-Disabled Veteran-Owned Small Businesses—to assess capabilities, pricing for market research purposes only, and socioeconomic status in alignment with NAICS code 541380. The scope involves comprehensive visual assessments and sampling across approximately 1.2 million square feet of facility space on a 100-acre campus, including all buildings, infrastructure, and support structures as detailed in the provided campus map. Responses must include company size classification, Unique Entity ID, subcontracting intentions, Federal Supply Schedule availability, and a capabilities statement, with submissions required via email to the designated contracting specialist by the extended deadline of June 22, 2026, at 10:00 AM Pacific Time due to prior SAM.gov access issues. No contract clauses, evaluation factors, payment details, or performance timelines are included in this document, as it serves solely as a pre-acquisition planning tool; no award will be made based on RFI responses. The place of performance is firmly established at the Long Beach VA Medical Center, with all work required to comply with federal, state, and local regulations as well as VA-specific standards, and no packaging, marking, or special contract requirements such as security clearances or key personnel specifications have been defined at this stage.

Testing Laboratories and Services

POSTED

about 18 hours ago

DEADLINE

4110--Upright Freezers and LN2 Container

Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

about 18 hours ago

DEADLINE

6515--5 portable vein finder devices

Surgical Appliance and Supplies Manufacturing

POSTED

about 18 hours ago

DEADLINE

Supply of Handheld Narcotics Analyzer (TruNarc Device)The contract is for the procurement and delivery of one handheld narcotics analyzer, specifically a TruNarc device or an approved equivalent, designed to non-contact identify controlled substances including fentanyl, carfentanil, and NPP through sealed containers without requiring direct interaction with the material. The device must be splash-proof, lightweight for field use, and engineered to operate without scheduled maintenance, ensuring reliability and minimal downtime in operational environments. It must meet stringent performance standards to support rapid, accurate detection in real-world执法 scenarios. This is a Service-Disabled Veteran-Owned Small Business Set Aside subcontract, governed under NAICS code 334516, and issued by the Department of Veterans Affairs through the 262-NETWORK Contract Office 22. The solicitation was posted on July 27, 2026, with a response deadline of August 3, 2026. Performance of the contract will be based in Los Angeles, California, with a zip code of 90073-1003. The procurement is targeted toward qualified small businesses owned and operated by service-disabled veterans, adhering to set-aside requirements designed to promote veteran entrepreneurship and economic opportunity.

Analytical Laboratory Instrument Manufacturing

POSTED

DEADLINE

Medical Equipment Installation & CommissioningThe contract requires onsite delivery, unpacking, installation, calibration, and priming of urology scopes to ensure they are fully operational for clinical use, with full coordination and documentation to support compliance and functionality. All activities must be performed at the designated facility, with emphasis on precise technical execution and thorough recordkeeping to meet healthcare standards. The scope is classified as a subcontract under NAICS code 811211 and is managed by the Department of Veterans Affairs through the 262-NETWORK Contract Office 22. Proposals must be submitted by August 24, 2026, with no set-aside designation specified, and performance is expected to occur at a location yet to be defined within the agency's operational footprint.

Consumer Electronics Repair and Maintenance

POSTED

DEADLINE

Loaner Scope Pool ManagementThe contract involves the management and deployment of a rotating inventory of loaner urology endoscopes to maintain uninterrupted clinical operations during maintenance and repair cycles of primary equipment. This includes the end-to-end logistics of sourcing, distributing, retrieving, sanitizing, and returning scopes to healthcare facilities in a timely and compliant manner, ensuring sterile, operational instruments are always available when needed. The service must support clinical continuity without disruption, adhering to strict medical device handling and infection control standards throughout the lifecycle of each scope. The work falls under NAICS code 532490, classifying it as other commercial and industrial machinery and equipment rental and leasing, and is structured as a subcontract under the Department of Veterans Affairs, specifically managed by the 262-NETWORK Contract Office 22. The opportunity was posted on July 27, 2026, with a response deadline of August 24, 2026, though no specific location or point of contact is provided. The successful contractor will be responsible for robust inventory control, rapid turnaround of repaired devices, and full compliance with healthcare logistics protocols to meet the critical needs of veteran care facilities across the VA system.

Other Commercial and Industrial Machinery and Equipment Rental and Leasing

POSTED

DEADLINE

Clinical and Technical Training DeliveryThe contract seeks to deliver onsite clinical and technical training to VA staff across all facilities within VISN 22, focusing on the proper operation and maintenance of urology endoscopic equipment. This training is designed to ensure that healthcare personnel are fully proficient in using advanced urological scopes, including troubleshooting, cleaning, sterilization, and routine maintenance procedures to maintain patient safety and equipment reliability. The effort will be conducted directly at VA medical centers throughout the network, requiring the contractor to deploy qualified trainers with expertise in both clinical workflows and technical service protocols for urology instrumentation. The contract is categorized as a subcontract under NAICS code 611519, indicating it falls within the category of other educational services, and is issued by the Department of Veterans Affairs through the 262-NETWORK Contract Office 22. The solicitation was posted on July 27, 2026, with responses due by August 24, 2026. Performance will be required at various locations within VISN 22, though specific sites are not designated in the posting. The contract aims to standardize training protocols, improve equipment uptime, enhance clinical outcomes, and support VA’s mission to deliver high-quality urological care through competent, well-trained staff.

Other Technical and Trade Schools

POSTED

DEADLINE

Urology Endoscope Supply (New Equipment)The contract involves the supply of new, FDA-cleared urology endoscopes, specifically cystoscopes, ureteroscopes, and resectoscopes, all requiring full original equipment manufacturer documentation and full compliance with Department of Veterans Affairs technical and shipping standards. All equipment must be newly manufactured and legally cleared by the FDA, ensuring safety, performance, and regulatory adherence for use in VA medical facilities. The procurement is structured as a subcontract under the NAICS code 339112, indicating classification within medical equipment manufacturing, and is managed by the 262-NETWORK Contract Office 22 within the Department of Veterans Affairs. Responses to this solicitation are due by August 24, 2026, at 4:00 PM, with the posting date listed as July 27, 2026, providing a four-week window for interested parties to prepare and submit proposals. While specific delivery locations and points of contact are not detailed, the equipment must meet the VA’s stringent requirements for compliance, documentation, and logistics, suggesting fulfillment will be coordinated directly with VA healthcare institutions nationwide. No set-aside designations are specified, meaning the opportunity is open to all eligible contractors without preference based on business size or owner characteristics.

Surgical and Medical Instrument Manufacturing

POSTED

DEADLINE