This Combined Synopsis/Solicitation opportunity from Department Of Defense was posted on May 8, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

AMENDMENT 0002- FY26- AFLCMC Mold Cleaning

Closed

F2XTRA6077A001Federal

Submission Closed05/15/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 562910

New

Theatre Mold Remediation Scope of Work

Solicitation # AT25-0006

Solicitation AT25-0006 is a subcontracting opportunity with Adams and Associates, Inc. for comprehensive mold remediation at Theatre Building 1086 of the Atterbury Job Corps Center in Edinburgh, Indiana. The project was initiated following a sprinkler system failure that caused significant water damage. The scope of work requires the remediation of the entire building, including cleaning visible mold from CMU walls, concrete floors, and vinyl tiles, as well as the removal and replacement of affected drywall, gypsum wallboard, and acoustical tile ceiling finishes. Additionally, the contractor must clean or replace damaged theater seating cushions and perform dehumidification to maintain humidity levels at or below 50 percent. All work must adhere to ANSI/IICRC S520 standards, EPA guidelines, OSHA regulations, and the findings of the Micro Air Inc. Mold Testing report dated April 11, 2024. The contract is a single lump sum award based on best value, with evaluation weights distributed across price (60 points), quality (20 points), past performance (10 points), and schedule (10 points). Key requirements include the provision of a Certified Industrial Hygienist for verification and final clearance, a detailed remediation plan featuring HEPA filtration and negative air pressure, and compliance with Davis-Bacon Act wage determinations. Bidders must hold a valid Indiana Contractor's License and provide proof of automobile and workers compensation insurance, naming Adams and Associates, Inc. as an additional insured. Proposals must be submitted on company letterhead and include a detailed cost breakdown, a timeline for substantial completion, and a 90-day bid guarantee. Work must commence within 14 days of the Notice to Proceed, and payment is issued on Net 30 terms.

Atterbury Job Corps Center

POSTED

DEADLINE

Hazardous Waste Collection Staffing (Field Operations)

County of Orange OC Waste & Recycling

POSTED

DEADLINE

Asbestos Abatement and Hazardous Material DisposalThis subcontract for the City of Newport News Codes Compliance involves the identification, removal, and legal disposal of asbestos-containing materials and other hazardous substances. The selected contractor will support prime contractors by implementing containment systems and HEPA filtration to ensure all materials are removed according to strict project specifications. The final deliverables include a fully cleared site and all necessary hazardous waste disposal manifests. To qualify for this engagement, the contractor must be a licensed Asbestos Abatement Contractor and hold all required EPA and state certifications. The project falls under NAICS code 562910, with a response deadline set for November 2, 2026.

POSTED

DEADLINE

Contaminated Soil RemediationThis subcontract for Contaminated Soil Remediation involves the removal and legal disposal of contaminated soil for prime contractors working on City of Naperville public utility projects. The selected provider will be responsible for excavating materials and transporting them to approved facilities, ensuring all work aligns with the Geotechnical Exploration Report and LPC-663 standards. To qualify, contractors must possess valid licensed hazardous waste hauling and disposal certifications. The project deliverables include a site completely cleared of contaminated soil and the provision of all necessary disposal manifests. This opportunity is managed by the Illinois Public Utilities Water division under NAICS code 562910. Interested parties must submit their responses by the deadline of November 20, 2026.

Public Utilities (Water) | DPU-W

POSTED

DEADLINE

Asbestos and Lead-Based Paint AbatementThis subcontract for the Fulton County Purchasing Department in Georgia focuses on the identification, handling, removal, and lawful disposal of hazardous materials. The scope of work specifically includes the abatement of asbestos-containing materials and the removal of lead-containing materials and hazardous coatings. To ensure safety and compliance, the contractor must utilize specialized containment systems and HEPA filtration to deliver certified asbestos-free and lead-free structures. Qualified providers must hold NESHAP certification and the necessary hazardous materials handling licenses. This opportunity falls under NAICS code 562910 and was posted on October 28, 2026, with a response deadline of November 20, 2026. The selected subcontractor will support prime contractors on various projects managed by the county.

Fulton County Purchasing Department

POSTED

DEADLINE

Environmental Remediation and Tree ProtectionThis subcontract for Environmental Remediation and Tree Protection involves providing specialized services for prime contractors on municipal projects within the City of Naperville. The scope of work includes the removal and disposal of 100 cubic yards of contaminated soil, as well as urban forestry protection measures such as tree root pruning and the installation of protective fencing and tree trunk protection. To qualify, the contractor must hold the necessary certifications for hazardous waste hauling and disposal. Key deliverables include the provision of protected tree stands and the submission of certified disposal records. The project is managed under the Public Utilities Water division of the Illinois agency, with a response deadline set for November 20, 2026.

Public Utilities (Water) | DPU-W

POSTED

DEADLINE

Hazardous Materials AbatementThis subcontract for Hazardous Materials Abatement involves the identification and removal of asbestos and other dangerous substances for prime contractors working on City of Jackson Community Development projects. The selected contractor is responsible for ensuring all abatement activities adhere to MIOSHA, DEQ, OSHA, and USEPA NESHAP standards, utilizing specialized containment and filtration equipment based on Pre-Demolition Compliance Survey assessments to deliver a certified hazardous material free site. To be eligible, contractors must possess a certified hazardous material abatement license and a permit from the Department of Community Development. This opportunity falls under NAICS code 562910 and was posted on October 28, 2026, with a response deadline of November 5, 2026.

Community Development

POSTED

DEADLINE

Lead and Asbestos Testing and RemovalThis subcontract for the City of Fort Lauderdale involves the testing, abatement, and disposal of lead-based paint and asbestos-containing materials for bridge projects managed by the Public Works Department. The selected contractor will be responsible for collecting samples for laboratory analysis, installing necessary containment systems, and transporting all hazardous materials to approved disposal facilities. The contractor must ensure full compliance with all federal, state, and local regulations throughout the process. Key deliverables include the provision of detailed laboratory analysis reports and official certified documentation for disposal and clearance. The response deadline for this opportunity is November 30, 2026.

City of Fort Lauderdale

POSTED

DEADLINE

Environmental Site Investigation and RemediationThis subcontract for Environmental Site Investigation and Remediation involves performing critical site assessments and land remediation for prime contractors working on Defence Infrastructure Organisation residential projects at Feltham Barracks. The scope of work focuses on a former military intelligence facility, where the provider must conduct extensive soil and groundwater testing to identify contaminants and implement effective remediation strategies to ensure the land is safe for residential development. The contractor is responsible for delivering comprehensive environmental impact reports and obtaining the necessary remediated site certifications. Operating under NAICS code 562910, the project ensures that all environmental hazards are mitigated in accordance with safety standards to facilitate the transition of the military site into a residential area.

Defence Infrastructure Organisation

POSTED

DEADLINE

Asbestos Removal and AbatementThis subcontract for Asbestos Removal and Abatement involves the physical removal, containment, and disposal of asbestos-containing materials for prime contractors working on University of Bedfordshire facility projects. The selected provider must implement strict containment measures, including the use of negative pressure units and HEPA filtration systems, to prevent fiber release and ensure the safe transport of hazardous waste in accordance with UK regulations. To qualify, the contractor must hold a Licensed Asbestos Removal Contractor certification and maintain full compliance with HSE standards. Key deliverables include the provision of certified asbestos-free areas and the submission of official waste consignment notes. The response deadline for this opportunity is November 27, 2026.

University of Bedfordshire

POSTED

DEADLINE

Provision of Asbestos Management & Compliance Service

Solicitation # UoB/P EST - 00000747

The University of Bedfordshire is soliciting proposals under solicitation number UoB/P EST - 00000747 for the provision of asbestos management and compliance services. This contract, categorized under asbestos removal services, covers multiple performance locations including Bedford, Luton, Buckinghamshire CC, and the broader Bedfordshire and Hertfordshire area. The estimated total value of the contract is 141,666 GBP excluding VAT. The initial period of performance is estimated to run from January 1, 2027, to December 31, 2029, with the possibility of two twelve-month extensions extending the term through December 31, 2031. Interested parties must submit their responses via the in-tend portal by the deadline of November 27, 2026, at 12:00pm. Detailed award criteria and specific deliverables are contained within the tender documents available on the procurement portal.

University of Bedfordshire

POSTED

DEADLINE

Mold Abatement SpecialistThis subcontract opportunity is for a Mold Abatement Specialist to provide removal and remediation services for prime contractors working on Montebello Unified School District facility projects in Montebello, California. The scope of work includes the installation of containment, three-stage decontamination units, and negative air pressure systems. Specific tasks involve removing drywall and ceiling grid tiles, followed by HEPA vacuuming, wet wiping, and kiln painting to the studs to ensure a mold-free environment verified by third-party clearances. The project requires the use of certified mold abatement technicians and strict adherence to CAL/OSHA compliance standards. Interested parties must respond by November 2, 2026. The work falls under NAICS code 562910 and is focused on delivering safe, remediated spaces within the school district's facilities.

Montebello Unified School District

POSTED

1 day ago

DEADLINE

in 4 days

AI Contract Overview

The 42nd Contracting Squadron at Maxwell Air Force Base, Alabama, is soliciting mold cleaning services under a combined synopsis/solicitation numbered F2XTRA6077A001, issued as Amendment 0002 to update key dates and revise the Statement of Work from full remediation to a cleaning-focused scope. This is a total small business set-aside under NAICS code 562910 with a $25 million size standard, and offers must be submitted via email by 12:00 PM CDT on May 4, 2026, to designated points of contact. The requirement targets mold cleanup within Building 856 at Maxwell-Gunter Annex, Montgomery, Alabama, involving the removal and disposal of mold-contaminated materials such as drywall, ceiling tiles, carpet, and furniture; surface disinfection using EPA-registered products; application of mold inhibitors; replacement of 2,890 ceiling tiles and 104 square feet of ceiling grid; and cleaning of 78 vents and return registers, with no requirement for wall or HVAC duct access or air sampling. All work must comply with OSHA, EPA, and local regulations, and waste will be disposed of as standard construction and demolition debris, with no hazardous waste generated. The contract is firm-fixed price, and award will follow a best-value trade-off process where technical acceptability is a mandatory pass/fail threshold, with price being the determining factor among technically acceptable offers. Site visit is mandatory for all offerors and scheduled for April 28, 2026, at 10:00 AM CDT at Building 856, but attendees must report to the Maxwell Blvd Visitor’s Center at 9:00 AM CDT to obtain passes, with attendance details required by April 24, 2026. Contractor personnel must comply with extensive installation access and security protocols, including obtaining base passes, presenting valid driver’s licenses and vehicle insurance, wearing ID badges, and undergoing random vehicle inspections. All personnel requiring unescorted access must meet Defense Department personnel security standards, and the contractor must notify the Contracting Officer 30 days before on-site work begins, providing full personnel details and certification of mold remediation credentials for key staff. Special requirements include protection of fire alarm systems, electrical and communication infrastructure, mandatory submission of product and safety data sheets, and compliance with Environmental Protection Statement guidelines for waste. Invoicing must

General Info

DoD solicits small business bids for mold cleaning at Maxwell AFB; mandatory site visit April 28, 2026.

Agency

Department Of Defense → FA3300 42 Cons Cc

NAICS

562910 - Remediation Services

Place of Performance

Montgomery, AL, 36112, USA

Set-Aside

SBA

Documents

Amendment+0001-+Combo+Solicitation+-+Mold+Remediation.pdf

Amendment+0002-+Attachment+1-+Statement+of+Work.pdf

Amendment+0002-++Attachment+3-+Questions+and+Answers.pdf

Amendment+0002-+Combo+Solicitation+-+Mold+Cleaning.pdf

Attachment+1-+Statement+of+Work+%28SOW%29.pdf

Attachment+2-+Clauses+and+Provisions.pdf

Attachment+3-+Wage+Determination.txt

Combo+Solicitation+-+Mold+Remediation.pdf

AI Contract Breakdown

Uniform Contract Format

Timeline

2 updates

PhaseClosed

PostedApr 21

Combined Synopsis

Notice updatedMay 1

Response deadline changed from May 4, 2026 to May 12, 2026. The notice title changed. The notice description changed.

Notice updatedMay 8

Response deadline changed from May 12, 2026 to May 15, 2026. The notice title changed. The notice description changed.

Response DeadlineMay 15

Deadline has passed

Submission Closed

05/15/2026, 05:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → FA3300 42 Cons Cc

Contacts2 people available

OfficeMAXWELL AFB, AL, 36112-6334, USA

Organization / AgencyDepartment Of Defense → FA3300 42 Cons Cc

Office AddressMAXWELL AFB, AL, 36112-6334, USA

Contacts

Amn Matthew Diaz

William M Griffiths

Full Description

AMENDMENT 0002: Updates Solicitation suspense date and time, Updates to SOW and changes requirement from full remediation to cleaning. Questions and Answers have been uploaded as well from site visit. Question 5 has been answered on the questions and answers attachment that was previously updated without an answer.

The 42nd Contracting Squadron, 50 S. LeMay Plaza, Bldg. 804, Maxwell Air Force Base (AFB), AL has a requirement to procure Mold Removal and Remediation services for the Air Force Life Cycle Management Center at Maxwell-Gunter Annex, AL. This is a combined synopsis/solicitation for commercial services. This announcement constitutes the only solicitation; offers are being requested and a written solicitation will not be issued.

The solicitation number for this procurement is F2XTRA6077A001. This solicitation document and incorporated clauses and provisions (see Attachment 2) are those in effect in accordance with the Revolutionary Federal Acquisition Regulation Overhaul (RFO) and Revolutionary Defense Federal Acquisition Regulation Supplement (R-DFARS).

A firm-fixed priced award will be made in accordance with the following:
NAICS Code: 562910; Size Standard: $25M

SITE VISIT: A site visit is scheduled for AFLCMC, 201 E Moore Dr., Bldg 856, Maxwell-Gunter Annex, AL 36114 on Tuesday, 28 Apr 2026, at 10:00 AM Central Daylight Time (CDT). Please be advised, although the site visit is at Maxwell-Gunter Annex, offerors should be at the Maxwell Blvd Gate, Visitor’s Center at Maxwell AFB, AL at 09:00 AM CDT to receive a visitor’s pass. Visitor passes are not issued at Maxwell-Gunter Annex. Please provide a list of all attendees and ensure they have their valid STAR driver’s license, proof of vehicle insurance, and vehicle registration. All attendees’ names will need to be submitted by Friday, 24 Apr 2026, at 03:00 PM CDT. In addition to the attendees name (as reflected on their driver’s license), include title and a telephone number for each individual. Submit the requested information to Amn Matthew Diaz, contact@example.gov and William Griffiths,
contact@example.gov . Offerors are encouraged to visit the site and take steps as may be reasonably necessary to ascertain the nature and location of work and the general and local conditions that can affect the work or cost thereof. Failure to do so will not relieve offerors from the responsibility for estimating properly the difficulty or cost of successfully performing the work. The Government will assume no responsibility for any understanding or representation concerning conditions made by any of its officers or agents prior to the execution of the contract, unless included in this solicitation, the specification, or related documents. All pertinent questions shall be submitted by e-mail 30 Apr 2026 by 01:30 PM CDT.